Upgrading Electrolyte Antioxidant Chemistry by Constructing Potential Scaling Relationship.

Rational design of advanced electrolytes to improve the high-voltage capability has been attracting wide attention as one critical solution to enable next-generation high-energy-density batteries. However, the limited understanding of electrolyte antioxidant chemistry as well as the lack of valid quantization approaches have resulted in knowledge gap, which hinders the formulation of new electrolytes. Herein, we construct a standard curve based on representative solvation structures to quantify the oxidation stability of ether-based electrolytes, which reveals the linear correlation between the oxidation potential and the atomic charge of the least oxidation-resistant solvent. Dictating by the regularity between solvation composition and oxidation potential, a (Trifluoromethyl)cyclohexane-based localized high-concentration electrolyte dominated by anion-less solvation structures was designed to optimize the cycling performance of 4.5 V 30-µm-Li||3.8-mAh cm-2-LiCoO2 batteries, which maintained 80% capacity retention even after 440 cycles. The consistency of experimental and computational results validates the proposed principles, offering a fundamental guideline to evaluate and design aggressive electrochemical systems.

Stable Oxyhalide-Nitride Fast Ionic Conductors for All-Solid-State Li Metal Batteries.

Rechargeable all-solid-state lithium metal batteries (ASSLMBs) utilizing inorganic solid-state electrolytes (SSEs) are promising for electric vehicles and large-scale grid energy storage. However, the Li dendrite growth in SSEs still constrains the practical utility of ASSLMBs. To achieve a high dendrite-suppression capability, SSEs must be chemically stable with Li, possess fast Li transfer kinetics, and exhibit high interface energy. Herein, a class of low-cost, eco-friendly, and sustainable oxyhalide-nitride solid electrolytes (ONSEs), denoted as LixNyIz-qLiOH (where x = 3y + z, 0 ≤ q ≤ 0.75), is designed to fulfill all the requirements. As-prepared ONSEs demonstrate chemically stable against Li and high interface energy (>43.08 meV Å-2), effectively restraining Li dendrite growth and the self-degradation at electrode interfaces. Furthermore, improved thermodynamic oxidation stability of ONSEs (>3 V vs Li+/Li, 0.45 V for pure Li3N), arising from the increased ionicity of Li─N bonds, contributes to the stability in ASSLMBs. As a proof-of-concept, the optimized ONSEs possess high ionic conductivity of 0.52 mS cm-1 and achieve long-term cycling of Li||Li symmetric cell for over 500 h. When coupled with the Li3InCl6 SSE for high-voltage cathodes, the bilayer oxyhalide-nitride/Li3InCl6 electrolyte imparts 90% capacity retention over 500 cycles for Li||1 mAh cm-2 LiCoO2 cells.

Metal chloride cathodes for next-generation rechargeable lithium batteries.

Rechargeable lithium-ion batteries (LIBs) have prospered a rechargeable world, predominantly relying on various metal oxide cathode materials for their abilities to reversibly de-/intercalate lithium-ion, while also serving as lithium sources for batteries. Despite the success of metal oxide, issues including low energy density have raised doubts about their suitability for next-generation lithium batteries. This has sparked interest in metal chlorides, a neglected cathode material family. Metal chlorides show promise with factors like energy density, diffusion coefficient, and compressibility. Unfortunately, challenges like high solubility hamper their utilization. In this review, we highlight the opportunities for metal chlorides in the post-lithium-ion era. Subsequently, we summarize their dissolution challenges. Furthermore, we discuss recent advancements, encompassing liquid-state electrolyte engineering, solid-state electrolytes (SSEs) cooperation, and LiCl-based cathodes. Finally, we provide an outlook on future research directions of metal chlorides, emphasizing electrode fabrication, electrolyte design, the application of SSEs, and the exploration of conversion reactions.

Deeply Lithiated Carbonaceous Materials for Great Lithium Metal Protection in All-Solid-State Batteries.

Protection of lithium (Li) metal electrode is a core challenge for all-solid-state Li metal batteries (ASSLMBs). Carbon materials with variant structures have shown great effect of Li protection in liquid electrolytes, however, can accelerate the solid-state electrolyte (SE) decomposition owing to the high electronic conductivity, seriously limiting their application in ASSLMBs. Here, a novel strategy is proposed to tailor the carbon materials for efficient Li protection in ASSLMBs, by in situ forming a rational niobium-based Li-rich disordered rock salt (DRS) shell on the carbon materials, providing a favorable percolating Li+ diffusion network for speeding the carbon lithiation, and enabling simultaneously improved lithiophilicity and reduced electronic conductivity of the carbon structure at deep lithiation state. Using the proposed strategy, different carbon materials, such as graphitic carbon paper and carbon nanotubes, are tailored with great ability to speed the interfacial kinetics, homogenize the Li plating/stripping processes, and suppress the SE decompositions, enabling much improved performances of ASSLMBs under various conditions approaching the practical application. This strategy is expected to create a novel roadmap of Li protection for developing reliable high-energy-density ASSLMBs.

Ultrauniform Plating of Lithium on 10-nm-Scale Ordered Carbon Grids for Long Lifespan Lithium Metal Batteries.

Tailorable lithium (Li) nucleation and uniform early-stage plating is essential for long-lifespan Li metal batteries. Among factors influencing the early plating of Li anode, the substrate is critical, but a fine control of the substrate structure on a scale of ≈10 nm has been rarely achieved. Herein, a carbon consisting of ordered grids is prepared, as a model to investigate the effect of substrate structure on the Li nucleation. In contrast to the individual spherical Li nuclei formed on the flat graphene, an ultrauniform and nuclei-free Li plating is obtained on the ordered carbon with a grid size smaller than the thermodynamical critical radius of Li nucleation (≈26 nm). Simultaneously, an inorganic-rich solid-electrolyte-interphase is promoted by the cross-sectional carbon layers of such ordered grids which are exposed to the electrolyte. Consequently, the carbon grids with a grid size of ≈10 nm show a favorable cycling stability for more than 1100 cycles measured at 2 mA cm-2 in a half cell. With LiNi0.8Co0.1Mn0.1O2 as cathode, the assembled full cell with a cathode capacity of 3 mAh cm-2 and a negative/positive ratio of 1.67 demonstrates a stable cycling for over 130 cycles with a capacity retention of 88%.

Reduction-Tolerance Electrolyte Design for High-Energy Lithium Batteries.

Lithium batteries employing Li or silicon (Si) anodes hold promise for the next-generation energy storage systems. However, their cycling behavior encounters rapid capacity degradation due to the vulnerability of solid electrolyte interphases (SEIs). Though anion-derived SEIs mitigate this degradation, the unavoidable reduction of solvents introduces heterogeneity to SEIs, leading to fractures during cycling. Here, we elucidate how the reductive stability of solvents, dominated by the electrophilicity (EPT) and coordination ability (CDA), delineates the SEI formed on Li or Si anodes. Solvents exhibiting lower EPT and CDA demonstrate enhanced tolerance to reduction, resulting in inorganic-rich SEIs with homogeneity. Guided by these criteria, we synthesized three promising solvents tailored for Li or Si anodes. The decomposition of these solvents is dictated by their EPTs under similar solvation structures, imparting distinct characteristics to SEIs and impacting battery performance. The optimized electrolyte, 1 M lithium bis(fluorosulfonyl)imide (LiFSI) in N-Pyrrolidine-trifluoromethanesulfonamide (TFSPY), achieves 600 cycles of Si anodes with a capacity retention of 81 % (1910 mAh g-1). In anode-free Cu||LiNi0.5Co0.2Mn0.3O2 (NCM523) pouch cells, this electrolyte sustains over 100 cycles with an 82 % capacity retention. These findings illustrate that reducing solvent decomposition benefits SEI formation, offering valuable insights for the designing electrolytes in high-energy lithium batteries.

Ligand-channel-enabled ultrafast Li-ion conduction.

Li-ion batteries (LIBs) for electric vehicles and aviation demand high energy density, fast charging and a wide operating temperature range, which are virtually impossible because they require electrolytes to simultaneously have high ionic conductivity, low solvation energy and low melting point and form an anion-derived inorganic interphase1-5. Here we report guidelines for designing such electrolytes by using small-sized solvents with low solvation energy. The tiny solvent in the secondary solvation sheath pulls out the Li+ in the primary solvation sheath to form a fast ion-conduction ligand channel to enhance Li+ transport, while the small-sized solvent with low solvation energy also allows the anion to enter the first Li+ solvation shell to form an inorganic-rich interphase. The electrolyte-design concept is demonstrated by using fluoroacetonitrile (FAN) solvent. The electrolyte of 1.3 M lithium bis(fluorosulfonyl)imide (LiFSI) in FAN exhibits ultrahigh ionic conductivity of 40.3 mS cm-1 at 25 °C and 11.9 mS cm-1 even at -70 °C, thus enabling 4.5-V graphite||LiNi0.8Mn0.1Co0.1O2 pouch cells (1.2 Ah, 2.85 mAh cm-2) to achieve high reversibility (0.62 Ah) when the cells are charged and discharged even at -65 °C. The electrolyte with small-sized solvents enables LIBs to simultaneously achieve high energy density, fast charging and a wide operating temperature range, which is unattainable for the current electrolyte design but is highly desired for extreme LIBs. This mechanism is generalizable and can be expanded to other metal-ion battery electrolytes.

Lithiophilic Covalent Organic Framework as Anode Coating for High-Performance Lithium Metal Batteries.

The growth of disorganized lithium dendrites and weak solid electrolyte interphase greatly impede the practical application of lithium metal batteries. Herein, we designed and synthesized a new kind of stable polyimide covalent organic frameworks (COFs), which have a high density of well-aligned lithiophilic quinoxaline and phthalimide units anchored within the uniform one-dimensional channels. The COFs can serve as an artificial solid electrolyte interphase on lithium metal anode, effectively guiding the uniform deposition of lithium ions and inhibiting the growth of lithium dendrites. The unsymmetrical Li||COF-Cu battery exhibits a Coulombic efficiency of 99 % at a current density of 0.5 mA cm-2 , which can be well retained up to 400 cycles. Meanwhile, the Li-COF||LFP full cell shows a Coulombic efficiency over 99 % at a charge of 0.3 C. And its capacity can be well maintained up to 91 % even after 150 cycles. Therefore, the significant electrochemical cycling stability illustrates the feasibility of employing COFs in solving the disordered deposition of lithium ions in lithium metal batteries.

Tuning the Cathode-Electrolyte Interphase Chemistry with Multifunctional Additive for High-Voltage Li-Ion Batteries.

The utilization of layered oxides as cathode materials has significantly contributed to the advancement of the lithium-ion batteries (LIBs) with high energy density and reliability. However, the structural and interfacial instability triggered by side reactions when charged to high voltage has plagued their practical applications. Here, this work reports a novel multifunctional additive, id est, 7-Anilino-3-diethylamino-6-methyl fluoran (ADMF), which exhibits unique characteristics such as preferential adsorption, oxygen scavenging, and electropolymerization protection for high-voltage cathodes. The ADMF demonstrates the capability to ameliorate the growth of cathode-electrolyte interphase (CEI), effectively diminishing the dissolution of transition metal (TM) ions, reducing the interface impedance, and facilitating the Li+ transport. As a result, ADMF additive with side reaction-blocking ability significantly enhances the cycling stability of MCMB||NCM811 full-cells at 4.4 V and MCMB||LCO full-cells at 4.55 V, as evidenced by the 80% retention over 600 cycles and 87% retention after 750 cycles, respectively. These findings highlight the potential of the additive design strategy to modulate the CEI chemistry, representing a new paradigm with profound implications for the development of next-generation high-voltage LIBs.

Breaking solvation dominance of ethylene carbonate via molecular charge engineering enables lower temperature battery.

Low temperatures severely impair the performance of lithium-ion batteries, which demand powerful electrolytes with wide liquidity ranges, facilitated ion diffusion, and lower desolvation energy. The keys lie in establishing mild interactions between Li+ and solvent molecules internally, which are hard to achieve in commercial ethylene-carbonate based electrolytes. Herein, we tailor the solvation structure with low-ε solvent-dominated coordination, and unlock ethylene-carbonate via electronegativity regulation of carbonyl oxygen. The modified electrolyte exhibits high ion conductivity (1.46 mS·cm-1) at -90 °C, and remains liquid at -110 °C. Consequently, 4.5 V graphite-based pouch cells achieve ~98% capacity over 200 cycles at -10 °C without lithium dendrite. These cells also retain ~60% of their room-temperature discharge capacity at -70 °C, and miraculously retain discharge functionality even at ~-100 °C after being fully charged at 25 °C. This strategy of disrupting solvation dominance of ethylene-carbonate through molecular charge engineering, opens new avenues for advanced electrolyte design.

Temperature-dependent interphase formation and Li+ transport in lithium metal batteries.

High-performance Li-ion/metal batteries working at a low temperature (i.e., <-20 °C) are desired but hindered by the sluggish kinetics associated with Li+ transport and charge transfer. Herein, the temperature-dependent Li+ behavior during Li plating is profiled by various characterization techniques, suggesting that Li+ diffusion through the solid electrolyte interface (SEI) layer is the key rate-determining step. Lowering the temperature not only slows down Li+ transport, but also alters the thermodynamic reaction of electrolyte decomposition, resulting in different reaction pathways and forming an SEI layer consisting of intermediate products rich in organic species. Such an SEI layer is metastable and unsuitable for efficient Li+ transport. By tuning the solvation structure of the electrolyte with a lower lowest unoccupied molecular orbital (LUMO) energy level and polar groups, such as fluorinated electrolytes like 1 mol L-1 lithium bis(fluorosulfonyl)imide (LiFSI) in methyl trifluoroacetate (MTFA): fluoroethylene carbonate (FEC) (8:2, weight ratio), an inorganic-rich SEI layer more readily forms, which exhibits enhanced tolerance to a change of working temperature (thermodynamics) and improved Li+ transport (kinetics). Our findings uncover the kinetic bottleneck for Li+ transport at low temperature and provide directions to enhance the reaction kinetics/thermodynamics and low-temperature performance by constructing inorganic-rich interphases.

Unique Tridentate Coordination Tailored Solvation Sheath Toward Highly Stable Lithium Metal Batteries.

Electrolyte optimization by solvent molecule design is recognized as an effective approach for stabilizing lithium (Li) metal batteries. However, the coordination pattern of Li ions (Li+ ) with solvent molecules is sparsely considered. Here, an electrolyte design strategy is reported based on bi/tridentate chelation of Li+ and solvent to tune the solvation structure. As a proof of concept, a novel solvent with multi-oxygen coordination sites is demonstrated to facilitate the formation of an anion-aggregated solvation shell, enhancing the interfacial stability and de-solvation kinetics. As a result, the as-developed electrolyte exhibits ultra-stable cycling over 1400 h in symmetric cells with 50 µm-thin Li foils. When paired with high-loading LiFePO4 , full cells maintain 92% capacity over 500 cycles and deliver improved electrochemical performances over a wide temperature range from -10 to 60 °C. Furthermore, the concept is validated in a pouch cell (570 mAh), achieving a capacity retention of 99.5% after 100 cycles. This brand-new insight on electrolyte engineering provides guidelines for practical high-performance Li metal batteries.

Immobilized lipase for sustainable hydrolysis of acidified oil to produce fatty acid.

Acidified oil is obtained from by-product of crops oil refining industry, which is considered as a low-cost material for fatty acid production. Hydrolysis of acidified oil by lipase catalysis for producing fatty acid is a sustainable and efficient bioprocess that is an alternative of continuous countercurrent hydrolysis. In this study, lipase from Candida rugosa (CRL) was immobilized on magnetic Fe3O4@SiO2 via covalent binding strategy for highly efficient hydrolysis of acidified soybean oil. FTIR, XRD, SEM and VSM were used to characterize the immobilized lipase (Fe3O4@SiO2-CRL). The enzyme properties of the Fe3O4@SiO2-CRL were determined. Fe3O4@SiO2-CRL was used to catalyze the hydrolysis of acidified soybean oil to produce fatty acids. Catalytic reaction conditions were studied, including amount of catalyst, reaction time, and water/oil ratio. The results of optimization indicated that the hydrolysis rate reached 98% under 10 wt.% (oil) of catalyst, 3:1 (v/v) of water/oil ratio, and 313 K after 12 h. After 5 cycles, the hydrolysis activity of Fe3O4@SiO2-CRL remained 55%. Preparation of fatty acids from high-acid-value by-products through biosystem shows great industrial potential.

Multifunctional solvent molecule design enables high-voltage Li-ion batteries.

Elevating the charging cut-off voltage is one of the efficient approaches to boost the energy density of Li-ion batteries (LIBs). However, this method is limited by the occurrence of severe parasitic reactions at the electrolyte/electrode interfaces. Herein, to address this issue, we design a non-flammable fluorinated sulfonate electrolyte by multifunctional solvent molecule design, which enables the formation of an inorganic-rich cathode electrolyte interphase (CEI) on high-voltage cathodes and a hybrid organic/inorganic solid electrolyte interphase (SEI) on the graphite anode. The electrolyte, consisting of 1.9 M LiFSI in a 1:2 v/v mixture of 2,2,2-trifluoroethyl trifluoromethanesulfonate and 2,2,2-trifluoroethyl methanesulfonate, endows 4.55 V-charged graphite||LiCoO2 and 4.6 V-charged graphite||NCM811 batteries with capacity retentions of 89% over 5329 cycles and 85% over 2002 cycles, respectively, thus resulting in energy density increases of 33% and 16% compared to those charged to 4.3 V. This work demonstrates a practical strategy for upgrading the commercial LIBs.

Sustainable Approach for the Synthesis of a Semicrystalline Polymer with a Reversible Shape-Memory Effect.

Shape-memory polymers (SMPs) have demonstrated potential for use in automotive, biomedical, and aerospace industries. However, ensuring the sustainability of these materials remains a challenge. Herein, a sustainable approach to synthesize a semicrystalline polymer using biomass-derivable precursors via catalyst-free polyesterification is presented. The synthesized biodegradable polymer, poly(1,8-octanediol-co-1,12-dodecanedioate-co-citrate) (PODDC), exhibits excellent shape-memory properties, as evidenced by good shape fixity and shape recovery ratios of 98%, along with a large reversible actuation strain of 28%. Without the use of a catalyst, the mild polymerization enables the reconfiguration of the partially cured two-dimensional (2D) film to a three-dimensional (3D) geometric form in the middle process. This study appears to be a step forward in developing sustainable SMPs and a simple way for constructing a 3D structure of a permanent shape.

Effect of Glutaraldehyde Multipoint Covalent Treatments on Immobilized Lipase for Hydrolysis of Acidified Oil.

Immobilized lipase is a green and sustainable catalyst for hydrolysis of acidified oil. Glutaraldehyde is widely used for lipase immobilization while the appropriate strategy optimizes the catalytic performance of lipase. In this research, lipase from Candida rugosa (CRL) was immobilized on spherical silica (SiO2) by glutaraldehyde multipoint covalent treatments, including covalent binding method and adsorption-crosslinking method. The enzymatic stability properties and performance in hydrolysis of refined oil and acidified oil were studied. We confirmed that the residual activity decreased while the stability increased because of the influence on secondary structure of lipase after multipoint covalent treatments. In the comparison of different immobilization strategies in multipoint covalent treatment, SiO2-CRL (covalent binding method) showed lower loading capacity than SiO2-CRL (adsorption-crosslinking method), resulting in low activity. However, SiO2-CRL (covalent binding method) showed better reusability and stability. Immobilized lipase via covalent binding method was more potential in the application of catalytic hydrolysis of acidified oils.

Simultaneous Stabilization of Lithium Anode and Cathode using Hyperconjugative Electrolytes for High-voltage Lithium Metal Batteries.

Although great progress has been made in new electrolytes for lithium metal batteries (LMBs), the intrinsic relationship between electrolyte composition and cell performance remains unclear due to the lack of valid quantization method. Here, we proposed the concept of negative center of electrostatic potential (NCESP) and Mayer bond order (MBO) to describe solvent capability, which highly relate to solvation structure and oxidation potential, respectively. Based on established principles, the selected electrolyte with 1.7 M LiFSI in methoxytrimethylsilane (MOTMS)/ (trifluoromethyl)trimethylsilane (TFMTMS) shows unique hyperconjugation nature to stabilize both Li anode and high-voltage cathode. The 4.6 V 30 µm Li||4.5 mAh cm-2 lithium cobalt oxide (LCO) (low N/P ratio of 1.3) cell with our electrolyte shows stable cycling with 91 % capacity retention over 200 cycles. The bottom-up design concept of electrolyte opens up a general strategy for advancing high-voltage LMBs.

Janus Dione-Based Conjugated Covalent Organic Frameworks with High Conductivity as Superior Cathode Materials.

The development of conductive covalent organic frameworks (COFs) with high stability is desirable for the practical applications in optoelectronics and energy storage. Herein, we developed a new kind of Janus dione-based COF, which is fully sp2 carbon-conjugated through the connection by olefin units. The electrical conductivity and carrier mobility reached up to 10-3 S cm-1 and 7.8 cm2 V-1 s-1, respectively. In addition, these COFs are strongly robust against various harsh conditions. The well-ordered two-dimensional crystalline structures, excellent porosity, high conductivity, and abundant redox-active carbonyl units render these COFs serviceable as high-performance cathode materials in lithium-ion batteries. It is worth noting that TFPPy-ICTO-COF exhibits a capacity of up to 338 mAh g-1 at a discharge rate of 0.1 C, which sets a new capacity record among COF-based lithium-ion batteries. Its capacity retention was as high as 100% even after 1000 cycles, demonstrating the remarkable stability of these Janus dione-based COF materials. This work not only expands the diversity of olefin-linked COFs but also makes a new breakthrough in energy storage.

Tackling realistic Li+ flux for high-energy lithium metal batteries.

Electrolyte engineering advances Li metal batteries (LMBs) with high Coulombic efficiency (CE) by constructing LiF-rich solid electrolyte interphase (SEI). However, the low conductivity of LiF disturbs Li+ diffusion across SEI, thus inducing Li+ transfer-driven dendritic deposition. In this work, we establish a mechanistic model to decipher how the SEI affects Li plating in high-fluorine electrolytes. The presented theory depicts a linear correlation between the capacity loss and current density to identify the slope k (determined by Li+ mobility of SEI components) as an indicator for describing the homogeneity of Li+ flux across SEI, while the intercept dictates the maximum CE that electrolytes can achieve. This model inspires the design of an efficient electrolyte that generates dual-halide SEI to homogenize Li+ distribution and Li deposition. The model-driven protocol offers a promising energetic analysis to evaluate the compatibility of electrolytes to Li anode, thus guiding the design of promising electrolytes for LMBs.