RESUMO
Degumming is a critical process in the purification of natural fibers, essential for enhancing their quality and usability across various applications. Traditional degumming methods employed for natural fibers encounter inherent limitations, encompassing prolonged procedures, excessive energy consumption, adverse environmental impact, and subpar efficiency. To address these challenges, a groundbreaking wave of degumming technique has emerged, transcending these constraints and heralding a new era of efficiency, sustainability, and eco-friendly techniques. This study represents the Firmiana simplex bark (FSB) fiber's delignification by using deep eutectic solvents (DESs). The study explores the application of deep eutectic solvents, by synthesizing different types of DES using a hydrogen bond acceptor (HBA) and four representative hydrogen bond donors (HBDs) for FSB fiber degumming. This study investigates the morphologies, chemical compositions, crystallinities, and physical properties of Firmiana simplex bark fibers before and after the treatment. Furthermore, the effects and mechanisms of different DESs on dispersing FSB fibers were examined. The experimental results showed that choline chloride-urea (CU)-based DES initiates the degumming process by effectively disrupting the hydrogen bond interaction within FSB fibers, primarily by outcompeting chloride ions. Following this initial step, the DES acts by deprotonating phenolic hydroxyl groups and cleaving ß-O-4 bonds present in diverse lignin units, thereby facilitating the efficient removal of lignin from the fibers. This innovative approach resulted in significantly higher degumming efficiency and ecofriendly as compared to traditional methods. Additionally, the results revealed that CU-based DES exhibits the utmost effectiveness in degumming FSB fibers. The optimal degumming conditions involve a precise processing temperature of 160 °C and a carefully controlled reaction time of 2 h yielding the most favorable outcomes. The present study presents a novel straightforward and environmentally friendly degumming method for Firmiana simplex bark, offering a substantial potential for enhancing the overall quality and usability of the resulting fibers. Our findings open new pathways for sustainable fiber-processing technologies.
RESUMO
Recent scientific interest has surged in the application of bioresources within nanotechnology, primarily because of their eco-friendly nature, wide availability, and cost-effectiveness. Jute is globally recognized as the second most prevalent source of natural cellulose fibers, and it produces a significant quantity of jute sticks as a byproduct. Nanocellulose (NC), which includes cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC), exhibits exceptional properties such as high strength, toughness, crystallinity, thermal stability, and stiffness. These attributes enable its versatile use across various sectors. The extensive surface areas and abundant hydroxyl groups of nanocellulose allow for diverse surface modifications, facilitating the design of advanced functional materials. This comprehensive review provides an overview of recent advancements in the synthesis, characterization, and potential applications of nanocellulose derived from jute. As a versatile natural fiber, jute holds immense potential across various research domains, including nanocellulose synthesis, scaffold fabrication, nanocarbon material preparation, life sciences, electronics and energy storage devices, drug delivery systems, nanomaterial synthesis, food packaging and paper industries. Additionally, its use extends to polymeric nanocomposites, sensors, and coatings. This study summarizes the extensive utilization of jute, emphasizing its versatility and potential across diverse research fields.
RESUMO
In this study, we investigated the use of deep eutectic solvents (DESs) at different molar ratios and temperatures as a green and efficient approach for microfibers (MFs) extraction. Our approach entailed the utilization of Firmiana simplex bark (FSB) fibers, enabling the production of different dimensions of FSB microfibers (FSBMFs) by combining DES pretreatment and mechanical disintegration technique. The proposed practice demonstrates the simplicity and effectiveness of the method. The morphology of the prepared microfibers was studied using the Scanning electron microscopic (SEM) technique. Additionally, the results revealed that the chemical and mechanical treatments did not significantly alter the well-preserved cellulose structure of microfibers, and a crystallinity index of 56.6 % for FSB fibers and 63.8 % for FSBMFs was observed by X-ray diffraction (XRD) analysis. Furthermore, using the freeze-drying technique, FSBMFs in water solutions produced effective aerogels for air purification application. In comparison to commercial mask (CM), FSBMF aerogels' superior hierarchical cellular architectures allowed them to attain excellent filtration efficiencies of 94.48 % (PM10) and 91.51 % (PM2.5) as well as excellent degradation properties were analyzed. The findings show that FSBMFs can be extracted from Firmiana simplex bark, a natural cellulose-rich material, using DES for environmentally friendly aerogel preparation and applications.
Assuntos
Biomassa , Casca de Planta , Casca de Planta/química , Solventes Eutéticos Profundos/química , Celulose/química , Géis/química , Difração de Raios X , Solventes/químicaRESUMO
Organic semiconductor-based photocatalysts have been alluring due to their edge over inorganic photocatalysts. In this study, a reusable copper-bismuth oxide/polyacrylonitrile (Cu-Bi2O3/PAN) fibrous mat was prepared by fast-process flame spray pyrolysis and electrospinning for photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB) dyes. The results confirmed a well-defined morphology of Cu-Bi2O3/PAN fibers and good coordination of flame-made Cu-Bi2O3 particles with the functional groups of PAN. The Cu-Bi2O3/PAN fibrous mat exhibits remarkable photocatalytic performance of 96.2% MB and 98.6% RhB degradation, with a reaction rate as high as about 4.5- and 10.2-times than that of flame-made Cu-Bi2O3 particles and PAN under neutral condition, even after 10 cycles. The Cu-Bi2O3/PAN exhibits complete degradation of MB and RhB in 90 and 150 min under alkaline and slightly acidic conditions, respectively. The synergistic effect of Cu-Bi2O3 and coordination bond between particles and functional groups of PAN promoted carrier migration, suppressed recombination of carriers and provided abundant radicals on the surface of the mat. Superoxide and hydroxyl radicals were the major active species involved in the degradation of RhB and MB, respectively. This work provides an insight into designing the Cu-metal-shuttle based photocatalysts to optimize fibrous mat application in water remediation.
Assuntos
Resinas Acrílicas , Cobre , Elétrons , Rodaminas , Azul de Metileno , CorantesRESUMO
Integration of polylactic acid (PLA) textiles with conductive MXene holds great promise for fabricating green electronic textiles (e-textiles) and reducing the risk of electronic waste. However, constructing robust conductive networks on PLA fibers remains challenging due to the susceptibility of MXene to oxidation and the hydrophobicity of PLA fibers. Here, we demonstrate a versatile, degradable, and durable e-textile by decorating the deep eutectic solvent (DES) micro-etched PLA textile with MXene and sericin-modified carbon nanotube hybrid (MXene@SSCNT). The co-assembly of MXene with SSCNT in water not only enhanced its oxidative stability but also formed synergistic conductive networks with biomimetic leaf-like nanostructures on PLA fiber. Consequently, the MXene@SSCNT coated PLA textile (MCP-textile) exhibited high electrical conductivity (5.5 Ω·sq-1), high electromagnetic interference (EMI) shielding efficiency (34.20 dB over X-band), excellent electrical heating performance (66.8 â, 5 V), and sensitive humidity response. Importantly, the interfacial bonding between the MXene@SSCNT and fibers was significantly enhanced by DES micro-etching, resulting in superior wash durability of MCP-textile. Furthermore, the MCP-textile also showed satisfactory breathability, flame retardancy, and degradability. Given these outstanding features, MCP-textile can serve as a green and versatile e-textile with tremendous potential in EMI shielding, personal thermal management, and respiratory monitoring.
RESUMO
Removal of methyl iodide (CH3I) from the air present within nuclear facilities is a critical issue. In case of any nuclear accident, there is a great need to mitigate the radioactive organic iodide immediately as it accumulates in human bodies, causing severe consequences. Current research focuses on removing organic iodides, for which the surface of activated carbon (AC) was modified by impregnating it with different metals individually, i.e. Ag, Ni, Zn, Cu and with the novel combination of these four metals (AZNC). After the impregnation of metals, triethylenediamine (TEDA) was coated on metal impregnated activated carbon (IAC) surface. The adsorption capacity of the combination of four metals IAC was found to be 276 mg/g as the maximum for the trapping of CH3I. Whereas TEDA-metal impregnation on ACs enhanced the removal efficiency of CH3I up to 352 mg/g. After impregnation, adsorption capacity of AZNC and AZNCT is significantly higher as compared to AC. According to the finding, t5% of AZNCT IAC is 46 min, which is considerably higher than the t5% of other tested adsorbents. According to isotherm fitting data, Langmuir isotherm was found superior for describing CH3I sorption onto AC and IACs. Kinetics study shows that pseudo second order model represented the sorption of CH3I more accurately than the pseudo first order. Thermodynamic studies gave negative value of ΔG which shows that the reaction is spontaneous in nature. Based on the findings, AZNCT IAC appears to have a great potential for air purification applications in order to obtain clean environment.
Assuntos
Carvão Vegetal , Poluentes Químicos da Água , Humanos , Metais , Piperazinas , Adsorção , Cinética , Concentração de Íons de HidrogênioRESUMO
Cigarette waste are pervasive litter on Earth, posing a major threat to organisms and ecosystems. However, these waste contain cellulose acetate (CA) and can be recycled, transforming into raw materials for new products. Polymers like CA can be used in biomedical applications as drug carriers and scaffolds for drug release. In this study, cigarette filters waste was collected, recycled and used for fabricating the nanofibrous membrane of cellulose acetate nanofibers (CFCA) through electrospinning technique. Tetracycline hydrochloride (TC) was encapsulated in the nanofibers to prevent bacterial infections. Various analyses were conducted: Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction Analysis (XRD) and Thermogravimetric analysis (TGA). CA and CFCA exhibited high water uptake properties and exhibited similar breaking stress and strain values. Both CA and CFCA effectively acted as stable drug carriers, with sustained in vitro drug release. Antibacterial activity was demonstrated by the drug-loaded CA and CFCA nanofibers against, Gram-positive bacteria Staphylococcus aureus and Gram-negative bacteria Escherichia coli. Based on their cytotoxicity evaluations on mouse fibroblast cells (L929), CA and CFCA fibrous mats demonstrated no cytotoxicity and similar cell viability results. Consequently, the TC-loaded nanofibers made from CA and CFCA exhibited suitable properties for wound healing applications.
RESUMO
The current study demonstrates the practical application of optical seed priming technology to improve cotton seed germination, plant growth, crop yield, and fiber quality. The hypothesis of this study is that seed irradiation with different colors of light can improve germination and cotton productivity in different environments. In the priming of cotton seeds, a wider range of the light spectrum was used, ranging from ultraviolet (UV) to red wavelengths. Various light sources such as blue LED, red LED, diode laser, UV-B, and UV-C were studied, along with different exposure times and energy densities. The exposure time ranged from 1.0 to 36.0 minutes, while the energy density doses varied from 88 to 7550 mJ cm-2, depending on the light source. In laboratory conditions, the investigation on the impact of optical seed priming on germination showed a maximum improvement of up to 180% compared to the control group. Among the different light sources and energy densities, blue LED light was found to be the most effective for enhancing cotton seed germination across different varieties. To validate the findings from the laboratory, large-scale field trials were conducted in two different environments in Pakistan, namely Tandojam and Faisalabad. The field trials demonstrated significant improvements in germination and yield, with increases of up to 37% and 74% over the control group, respectively. Once again, blue LED light emerged as the best light source for optical seed priming at the farm level. These field trials provided encouraging results, indicating the potential of the eco-friendly optical seed priming technique. The study suggests that optical seed priming can be a commercially viable technology for improving cotton seed germination, plant growth, crop yield, and fiber quality. By utilizing this technique, growers and researchers in developing countries can address the challenge of poor cotton germination and potentially enhance their agricultural productivity.
Assuntos
Germinação , Desenvolvimento Vegetal , Agricultura , Sementes , Paquistão , PlântulaRESUMO
Radioactive iodine is a hazardous fission product and a major concern for public health. Special attention is paid to iodine out of 80 fission products because of its short half-life of 8.02 days, high activity, and potential health hazards like its irreversible accumulation in thyroid gland and ability to cause thyroid cancer locally. Radioactive iodine can get released in the form of aerosols (cesium iodide), elemental iodine, and organic iodide after a nuclear accident and can cause off-site and on-site contamination. Filtered containment venting system (FCVS) is a safety system whose main objective is mitigation of severe accidents via controlled venting and removal of different forms of iodine to ensure safety of people and environment. After nuclear accidents like Fukushima, extensive research has been done on the removal of iodine by using dry scrubbers. This review paper presents research status of iodine removal by dry adsorbents especially after 10 years of Fukushima to assess the progress, research gap, and challenges that require more attention. A good adsorbent should be cost-effective; it should have high selective adsorption towards iodine, high thermal and chemical stability, and good loading capacity; and its adsorption should remain unaffected by aging and the presence of inhibitors like CO, NO2, CH3Cl, H2O, and Cl2 and radiation. Research on different dry adsorbents was discussed, and their capability as a potential filter for FCVS was reviewed on the basis of all the above-mentioned features. Metal fiber filters have been widely used for removal of aerosols especially micro- and nanoscale aerosols. For designing a metal fiber filter, optimal size or combination of sizes of fibers, number of layers, and loading capacity of filter should be decided according to feasibility and requirement. Balance between flow resistance and removal efficiency is also very important. Sand bed filters were successful in retention of aerosols, but they showed low trapping of iodine and no trapping of methyl iodide at all. For iodine and methyl iodide removal, many adsorbents like activated carbon, zeolites, metal organic frameworks (MOFs), porous organic frameworks (POPs), silica, aerogels, titanosilicates, etc. have been used. Impregnated activated carbon showed good results but low auto-ignition temperature and decline in adsorption due to aging and inhibitors like NOx made them less suitable. Silver zeolites have been very successful in methyl iodide and iodine removal, but they are expensive and affected by presence of CO. Titanosilicates, macroreticular resins, and chalcogels were also studied and they showed good adsorption capacities, but their thermal stability was low. Other adsorbents like silica, MOFs, aerogels, and POPs also showed promising results for iodine adsorption and good thermal stability, but very limited or no research is available on their performance in severe accident conditions. This review will be very helpful for researchers to understand the merits and demerits of different types of dry adsorbents, the important operating parameters that need optimization for designing an efficient scrubber, margin of research, and foreseeable challenges in removal of different forms of iodine.
Assuntos
Acidente Nuclear de Fukushima , Iodo , Neoplasias da Glândula Tireoide , Zeolitas , Humanos , Radioisótopos do Iodo , Carvão Vegetal , AdsorçãoRESUMO
PURPOSE: The chaperone protein BiP is the master regulator of the unfolded protein response in the endoplasmic reticulum. BiP chaperone activity is regulated by the post-translational modification AMPylation, exclusively provided by FICD. We investigated whether FICD variants identified in patients with motor neuron disease could interfere with BiP activity regulation. METHODS: Exome sequencing was performed to identify causative pathogenic variants associated with motor neuron diseases. Functional studies were conducted on fibroblasts from patients to explore the molecular mechanism of the disease. RESULTS: We identified biallelic variants in FICD causing a neurodegenerative disease of upper and lower motor neurons. Affected individuals harbor a specific missense variant, Arg374His, positioned in the catalytic motif of the enzyme and important for adenosine triphosphate binding. The mutated residue abolishes intramolecular interaction with the regulatory residue Glu234, essential to inhibit AMPylation and to promote de-AMPylation by FICD. Consequently, fibroblasts from patients with FICD variants have abnormally increased levels of AMPylated and thus inactivated BiP. CONCLUSION: Loss of BiP chaperone activity in patients likely results in a chronic impairment of the protein quality control system in the endoplasmic reticulum. These findings will guide the development of therapeutic strategies for motoneuron and related diseases linked to proteotoxic stress.
Assuntos
Doença dos Neurônios Motores , Doenças Neurodegenerativas , Humanos , Proteínas de Choque Térmico/química , Proteínas de Choque Térmico/metabolismo , Chaperona BiP do Retículo Endoplasmático , Retículo Endoplasmático/genética , Retículo Endoplasmático/metabolismo , Doença dos Neurônios Motores/genética , Doença dos Neurônios Motores/metabolismoRESUMO
In order to provide protection against extremely toxic gases, activated carbon (AC) adsorption has long been regarded to be a useful technology in terms of gas removal. AC without chemical impregnation has been considerably less effective than impregnated ACs. AC in present use was modified with an organic amine, i.e., triethylenediamine (TEDA) to enhance the physical and chemical properties of AC in order to remove specific poisonous gases. With the rising concern on environmental pollution, there has been an increased curiosity in ACs as the means for eliminating pollutants from environment. Purpose of this study was to assess the TEDA impregnated AC in terms of adsorption capability for simulant gas like SO2. Analysis was done in a properly designed setup. By using the scheme reported here, significant adsorption of toxic gas was obtained. Maximum removal capability observed by AC-4 for SO2 gas was 374 mg/g-C and its breakthrough time was 264 min. Breakthrough time and adsorption capacity of AC-4 was found to be 25 times and 10 times greater as compared to raw AC. Different characterization techniques were also used to study impregnated AC. It was found that chemical adsorption was the crucial means by which TEDA-impregnated AC removed the simulant gas. Langmuir model was best to represent equilibrium, and adsorption kinetics follow second-order model. The process was endothermic, favorable, and spontaneous.
Assuntos
Dióxido de Enxofre , Poluentes Químicos da Água , Adsorção , Carvão Vegetal/química , Cinética , Piperazinas/química , Dióxido de Enxofre/químicaRESUMO
Lanthanide-based upconversion (UC) allows harvesting sub-bandgap near-infrared photons in photovoltaics. In this work, we investigate UC in perovskite solar cells by implementing UC single crystal BaF2:Yb3+, Er3+ at the rear of the solar cell. Upon illumination with high-intensity sub-bandgap photons at 980 nm, the BaF2:Yb3+, Er3+ crystal emits upconverted photons in the spectral range between 520 and 700 nm. When tested under terrestrial sunlight representing one sun above the perovskite's bandgap and sub-bandgap illumination at 980 nm, upconverted photons contribute a 0.38 mA/cm2 enhancement in the short-circuit current density at lower intensity. The current enhancement scales non-linearly with the incident intensity of sub-bandgap illumination, and at higher intensity, 2.09 mA/cm2 enhancement in current was observed. Hence, our study shows that using a fluoride single crystal like BaF2:Yb3+, Er3+ for UC is a suitable method to extend the response of perovskite solar cells to near-infrared illumination at 980 nm with a subsequent enhancement in current for very high incident intensity.
RESUMO
Nuclear, biological, and chemical warfare (NBC) agents cause an inevitable threat to defense forces and civilians. Exposure to these toxic agents causes a lot of damage to lives. One can avoid the damage of these toxic agents by taking appropriate preventive measures. Respiratory protection is obviously necessary when military personnel or civilians get bounded by such type of noxious situation as contaminant-free air is then required for breathing and it can only be provided by means of a proper gas mask and relevant canister. In purification of contaminated atmospheres, activated carbon has so far met with outstanding success. It removes toxic chemicals either by chemical or physical adsorption from the contaminated air. When any toxic chemicals get adsorbed on the modified impregnated carbon's surface, they usually adsorb there by means of chemical reactions. Destruction of adsorbed toxic substances is expected by such a reactive carbon. In this perspective, an attempt has been made to review the literature from past decades on the removal of toxic chemical warfare agents (CWAs) and radioactive content from air stream in case of any nuclear, biological, and chemical attack by selectively modifying or impregnating the activated carbon surface. This review also covers some important adsorption properties of materials being used in gas mask filters for effective removal of chemicals from airstream. The probable removal mechanisms of various chemical warfare agents and radioactive content have also been reviewed.
Assuntos
Poluição do Ar , Substâncias para a Guerra Química , Adsorção , Atmosfera , Carvão Vegetal , Substâncias para a Guerra Química/análiseRESUMO
Despite considerable research of arsenic (As) level in ground/drinking water of Pakistan, scarce data is available regarding irrigation water contamination by As and associated health risks. The municipal wastewater is routinely applied for soil irrigation in peri-urban agriculture of the country. Since the wastewater composition/contamination and its allied consequences greatly vary in different areas, therefore, it is imperative to check the possible health risks in areas where untreated wastewater is being applied for food crop production. This study analyzed potential health hazards of As-buildup in soil and food plants irrigated with municipal wastewater growing under natural conditions. Sixteen wastewater irrigation locations were selected in District Vehari. From these sites, a total of 16 wastewater samples, 108 soil samples and 65 plant samples were collected for As analysis. Total As contents in wastewater (5.3-63.6 µg/L), soil (1.4-19.6 mg/kg) and plants (0-6.5 mg/kg) greatly varied with sampling location, soil depths and plant type. Based on total As contents in edible tissues, risk assessment parameters, especially cancer risk factor, showed possible health risks (> 0.0001) for wheat crops for children while no risks for other food crops. The use of multiple and diversified food crops is recommended in the study area to minimize the possible risk of As exposure and poisoning. The study also anticipates some future viewpoints considering the on-ground situation of wastewater use, possible exposure of metal(loid)s to human and associated health concerns at local and global scale.
Assuntos
Arsênio , Metais Pesados , Poluentes do Solo , Irrigação Agrícola , Criança , Humanos , Metais Pesados/análise , Paquistão , Medição de Risco , Solo , Poluentes do Solo/análise , Águas Residuárias/análiseRESUMO
The novel coronavirus, SARS-CoV-2, can be deadly to people, causing COVID-19. The ease of its propagation, coupled with its high capacity for illness and death in infected individuals, makes it a hazard to the community. Chest X-rays are one of the most common but most difficult to interpret radiographic examination for early diagnosis of coronavirus-related infections. They carry a considerable amount of anatomical and physiological information, but it is sometimes difficult even for the expert radiologist to derive the related information they contain. Automatic classification using deep learning models can help in better assessing these infections swiftly. Deep CNN models, namely, MobileNet, ResNet50, and InceptionV3, were applied with different variations, including training the model from the start, fine-tuning along with adjusting learned weights of all layers, and fine-tuning with learned weights along with augmentation. Fine-tuning with augmentation produced the best results in pretrained models. Out of these, two best-performing models (MobileNet and InceptionV3) selected for ensemble learning produced accuracy and FScore of 95.18% and 90.34%, and 95.75% and 91.47%, respectively. The proposed hybrid ensemble model generated with the merger of these deep models produced a classification accuracy and FScore of 96.49% and 92.97%. For test dataset, which was separately kept, the model generated accuracy and FScore of 94.19% and 88.64%. Automatic classification using deep ensemble learning can help radiologists in the correct identification of coronavirus-related infections in chest X-rays. Consequently, this swift and computer-aided diagnosis can help in saving precious human lives and minimizing the social and economic impact on society.
Assuntos
COVID-19/classificação , COVID-19/diagnóstico por imagem , Processamento de Imagem Assistida por Computador/métodos , Tórax/diagnóstico por imagem , Algoritmos , Simulação por Computador , Aprendizado Profundo , Diagnóstico por Computador , Humanos , Aprendizado de Máquina , Redes Neurais de Computação , Reprodutibilidade dos Testes , SoftwareRESUMO
Marigold (Calendula calypso) is a multipurpose ornamental plant, but its cadmium (Cd) tolerance and phytoremediation potential is unknown. The proposed study was carried out to unravel Cd partitioning, physiological and oxidative stress responses of C. calypso grown under Cd stress. Plants were grown for four months in pots having different soil Cd levels: 0, 25, 50, 75, and 100 mg kg-1 soil. Plant growth, biomass, photosynthetic pigments, leaf water contents, stomatal conductance, and membrane stability index were not decreased at 25 mg kg-1 Cd. At higher levels of Cd stress, activities of antioxidant enzymes (SOD, APX, CAT, POD) increased to mitigate H2O2 and lipid peroxidation. Cadmium uptake in plants increased with increasing soil Cd levels, and roots accumulated a greater portion of Cd, followed by shoots and flowers, respectively. On the basis of Cd accumulation and its tolerance, it was determined that C. calypso can be successfully grown for phytostabilization of Cd contaminated soils.
Assuntos
Biodegradação Ambiental , Cádmio/metabolismo , Calendula/fisiologia , Poluentes do Solo/metabolismo , Antioxidantes , Biomassa , Cádmio/análise , Peróxido de Hidrogênio , Neonicotinoides , Estresse Oxidativo , Fotossíntese , Folhas de Planta/química , Raízes de Plantas/química , Solo , Poluentes do Solo/análise , TiazinasRESUMO
Recently, environmental and ecological concerns are increasing due to the usage of petroleum-based products so the synthesis of ultra-fine chemicals and functional materials from natural resources is drawing a tremendous level of attention. Nanocellulose, a unique and promising natural material extracted from native cellulose, may prove to be most ecofriendly materials that are technically and economically feasible in modern times, minimizing the pollution generation. Nanocellulose has gained tremendous attention for its use in various applications, due to its excellent special surface chemistry, physical properties, and remarkable biological properties (biodegradability, biocompatibility, and non-toxicity). Various types of nanocellulose, viz. cellulose nanofibrils (CNFs), cellulose nanocrystals (CNCs), and bacterial nanocellulose (BNC), are deeply introduced and compared in this work in terms of sources, production, structures and properties. The metal and metal oxides especially zinc oxide nanoparticles (ZnO-NPs) are broadly used in various fields due to the diversity of functional properties such as antimicrobial and ultraviolet (UV) properties. Thus, the advancement of nanocellulose and zinc oxide nanoparticles (ZnO-NPs)-based composites materials are summarized in this article in terms of the preparation methods and remarkable properties with the help of recent knowledge and significant findings (especially from the past six years reports). The nanocellulose materials complement zinc oxide nanoparticles, where they impart their functional properties to the nanoparticle composites. As a result hybrid nanocomposite containing nanocellulose/zinc oxide composite has shown excellent mechanical, UV barrier, and antibacterial properties. The nanocellulose based hybrid nanomaterials have huge potential applications in the area of food packaging, biopharmaceuticals, biomedical, and cosmetics. Thus the functional composite materials containing nanocellulose and zinc oxide will determine the potential biomedical application for nanocellulose.
Assuntos
Materiais Biocompatíveis , Celulose/química , Nanocompostos , Óxido de Zinco/química , Antibacterianos/síntese química , Antibacterianos/química , Materiais Biocompatíveis/síntese química , Materiais Biocompatíveis/química , Embalagem de Alimentos , Hidrogéis/síntese química , Hidrogéis/químicaRESUMO
BACKGROUND: Acute poisoning is one of the most common causes of poisoning worldwide and is the fourth leading cause of death. It is either accidental or suicidal and causes a high mortality and morbidity. It is more common in males due to prolonged occupational exposure. The objective of this study is to find the pattern of acute poisoning and its relation with demographic variables in the emergency department of Ayub Teaching Hospital, Abbottabad. METHODS: This cross-sectional study was carried out on patients of acute intoxication brought to the emergency department of Ayub Teaching Hospital in the year 2017-18. Data was analyzed by SPSS-16.0 and presented as tables and figures. Chi-square test was applied at 5% level of significance. RESULTS: A total of 76 patients, 48 (63.16%) females and 28 (36.84%) males were included during the period. Mean age was 24.12±9.058 years. Thirty-nine (51.32)% cases belonged to rural areas and 37 (48.68)% were from urban areas. Cases of medicinal poisoning were 25 (32.89%) followed by 19 (25%) cases of organophosphate poisoning. Most cases of poisoning 36 (47.4%) were presented in the night shift. Thirty-one (40.79%) cases were brought to the hospital within 1-2 hours of incident. Cases of intentional poisoning were 51 (67.11%) while 25(32.89%) were due to accidental poisoning. CONCLUSION: Females within the age group 21-35 belonging to rural areas were more prone to poisoning. The common type of poisoning is medicinal poisoning. Most patients were presented to the emergency in the night shift within 1-2 hours of intoxication.
Assuntos
Serviço Hospitalar de Emergência , Hospitais de Ensino , Intoxicação , Adolescente , Adulto , Estudos Transversais , Feminino , Humanos , Masculino , Paquistão/epidemiologia , Intoxicação/epidemiologia , Intoxicação/terapia , Adulto JovemRESUMO
Arsenic (As) is a highly toxic and carcinogenic element. It has received considerable consideration worldwide in recent years due to its highest toxicity to human, and currently, high concentrations observed in the groundwater. Some recent media and research reports also highlighted possible As contamination of groundwater systems in Pakistan. However, there is a scarcity of data about As contents in groundwater in different areas/regions of the country. Consequently, the current study estimated the As concentration in the groundwater used for drinking purpose in 15 peri-urban sites of district Vehari, Pakistan. In total, 127 groundwater samples were collected and examined for As contents in addition to physicochemical characteristics such as temperature, electrical conductivity, pH, total soluble salts, chloride, carbonates, bicarbonates, sodium, potassium, lithium, calcium and barium. Results indicated that the groundwater samples were not fully fit for drinking purposes with several parameters, especially the alarming levels of As (mean As: 46.9 µg/L). It was found that 83% groundwater samples of peri-urban sites in district Vehari have As concentration greater than WHO lower permissible limit (10 µg/L). The risk assessment parameters (mean hazard quotient: 3.9 and mean cancer risk: 0.0018) also showed possible carcinogenic and non-carcinogenic risks associated with ingestion of As-contaminated groundwater at peri-urban sites. Based on the findings, it is anticipated that special monitoring and management of groundwater is necessary in the studied area in order to curtail the health risks associated with the use of As-contaminated drinking water. Moreover, appropriate remediation and removal of As from groundwater is also imperative for the study area before being used for drinking purpose to avoid As exposure and related risks to the local community.
Assuntos
Arsênio/análise , Exposição Dietética/análise , Água Subterrânea/análise , Poluentes Químicos da Água/análise , Arsênio/toxicidade , Carcinógenos/análise , Carcinógenos/toxicidade , Exposição Dietética/efeitos adversos , Água Potável/análise , Monitoramento Ambiental , Água Subterrânea/química , Humanos , Concentração de Íons de Hidrogênio , Paquistão , Medição de Risco , Temperatura , Poluentes Químicos da Água/toxicidade , Poços de ÁguaRESUMO
Water and land both are limited resources. Current management strategies are facing multiple challenges to meet food security of an increasing population in numerous South Asian countries, including Pakistan. The study of land cover/land use changes (LCLUC) and land surface temperature (LST) is important as both provide critical information for policymaking of natural resources. We spatially examined LCLU and LST changes in district Multan, Pakistan, and its impacts on vegetation cover and water during 1988 to 2017. The LCLUC indicate that rice and sugarcane had less volatility of change in comparison with both cotton and wheat. Producer's accuracy (PA) is the map accuracy (the producer of map), but user's accuracy (UA) is the accuracy from the point of view of a map user, not the map maker. Average overall producer's and user's accuracy for the region was 85.7% and 87.7% for Rabi (winter) and Kharif (summer) seasons, respectively. The results of this study showed that 'built-up area' increased with 7.2% of all the classes during 1988 to 2017 in the Multan district. Anthropogenic activities decreased the vegetation, leading to an increase in LST in study area. Changes on LCLU and LST during the last 30 years have shown that vegetation pattern has changed and temperature has increased in the Multan district.