RESUMO
Metal-organic frameworks (MOFs) have shown promise in enhancing the stability of biomolecules. Herein, biliverdin (BVD), a photoacoustic (PA) and fluorescent agent, was immobilized within the pores of NH2-MIL-101 (Fe) (FeMOFs) and on the surface of CuBTC crystallites (CuMOFs). MOFs were found to enhance the fluorescence emission and quench the PA intensity of biliverdin. Fluorescence and PA studies, in tandem with DFT simulations, demonstrated that the spectral interactions between MOFs and BVD resulted from interactions between biliverdin and the MOF pores and surfaces in addition to alterations in the HOMO-LUMO energy gap. The MOF internal structure of the MOF played a role in BVD loading, with the FeMOFs enabling greater BVD encapsulation, while CuMOF interactions with BVD primarily took place on the MOF surface. The role of these surface vs pore interactions in the release of biliverdin was explored. This study demonstrates that the effects of the MOF internal structure, surface interactions, and energy interactions should be taken into consideration for biomolecule loading in MOFs.
RESUMO
Severe trauma can induce systemic inflammation but also immunosuppression, which makes understanding the immune response of trauma patients critical for therapeutic development and treatment approaches. By evaluating the levels of 59 proteins in the plasma of 50 healthy volunteers and 1000 trauma patients across five trauma centers in the United States, we identified 6 novel changes in immune proteins after traumatic injury and further new variations by sex, age, trauma type, comorbidities, and developed a new equation for prediction of patient survival. Blood was collected at the time of arrival at Level 1 trauma centers and patients were stratified based on trauma level, tissues injured, and injury types. Trauma patients had significantly upregulated proteins associated with immune activation (IL-23, MIP-5), immunosuppression (IL-10) and pleiotropic cytokines (IL-29, IL-6). A high ratio of IL-29 to IL-10 was identified as a new predictor of survival in less severe patients with ROC area of 0.933. Combining machine learning with statistical modeling we developed an equation ("VIPER") that could predict survival with ROC 0.966 in less severe patients and 0.8873 for all patients from a five analyte panel (IL-6, VEGF-A, IL-21, IL-29, and IL-10). Furthermore, we also identified three increased proteins (MIF, TRAIL, IL-29) and three decreased proteins (IL-7, TPO, IL-8) that were the most important in distinguishing a trauma blood profile. Biologic sex altered phenotype with IL-8 and MIF being lower in healthy women, but higher in female trauma patients when compared to male counterparts. This work identifies new responses to injury that may influence systemic immune dysfunction, serving as targets for therapeutics and immediate clinical benefit in identifying at-risk patients.
RESUMO
Immune responses to biomedical implants, wound healing, and diseased tissues often involve collagen deposition by fibroblasts and other stromal cells. Dysregulated collagen deposition can lead to complications, such as biomaterial fibrosis, cardiac fibrosis, desmoplasia, liver fibrosis, and pulmonary fibrosis, which can ultimately result in losses of organ function or failure of biomedical implants. Current in vitro methods to induce collagen deposition include growing the cells under macromolecular crowding conditions or on fibronectin-coated surfaces. However, the majority of these methods have been demonstrated with a single cell line, and the combined impacts of culture conditions and postculture processing on collagen deposition have not been explored in detail. In this work, the effects of macromolecular crowding versus fibronectin coating, fixation with methanol versus fixation with paraformaldehyde, and use of plastic substrates versus glass substrates were evaluated using the WI-38 human lung fibroblast cell line. Fibronectin coating was found to provide enhanced collagen deposition under macromolecular crowding conditions, while a higher plating density led to improved collagen I deposition compared with macromolecular crowding. Collagen deposition was found to be more apparent on plastic substrates than on glass substrates. The effects of primary cells versus cell lines, and mouse cells versus human cells, were evaluated using WI-38 cells, primary human lung fibroblasts, primary human dermal fibroblasts, primary mouse lung fibroblasts, primary mouse dermal fibroblasts, and the L929 mouse fibroblast cell line. Cell lines exhibited enhanced collagen I deposition compared with primary cells. Furthermore, collagen deposition was quantified with picrosirius red staining, and plate-based drug screening through picrosirius red staining of decellularized extracellular matrices was demonstrated. The results of this study provide detailed conditions under which collagen deposition can be induced in vitro in multiple cell types, with applications including material development, development of potential antifibrotic therapies, and mechanistic investigation of disease pathways. Impact Statement This study demonstrated the effects of cell type, biological conditions, fixative, culture substrate, and staining method on in vitro collagen deposition and visualization. Further the utility of plate-based picrosirius red staining of decellularized extracellular matrices for drug screening through collagen quantification was demonstrated. These results should provide clarity and a path forward for researchers who aim to conduct in vitro experiments on collagen deposition.
Assuntos
Colágeno , Fibroblastos , Fibrose , Humanos , Animais , Colágeno/metabolismo , Camundongos , Fibroblastos/metabolismo , Linhagem Celular , Fibronectinas/metabolismoRESUMO
During wound healing and surgical implantation, the body establishes a delicate balance between immune activation to fight off infection and clear debris and immune tolerance to control reactivity against self-tissue. Nonetheless, how such a balance is achieved is not well understood. Here we describe that pro-regenerative biomaterials for muscle injury treatment promote the proliferation of a BATF3-dependent CD103+XCR1+CD206+CD301b+ dendritic cell population associated with cross-presentation and self-tolerance. Upregulation of E-cadherin, the ligand for CD103, and XCL-1 in injured tissue suggests a mechanism for cell recruitment to trauma. Muscle injury recruited natural killer cells that produced Xcl1 when stimulated with fragmented extracellular matrix. Without cross-presenting cells, T-cell activation increases, pro-regenerative macrophage polarization decreases and there are alterations in myogenesis, adipogenesis, fibrosis and increased muscle calcification. These results, previously observed in cancer progression, suggest a fundamental mechanism of immune regulation in trauma and material implantation with implications for both short- and long-term injury recovery.
Assuntos
Materiais Biocompatíveis , Células Dendríticas , Materiais Biocompatíveis/farmacologiaRESUMO
Organ-on-a-chip devices are powerful modeling systems that allow researchers to recapitulate the in vivo structures of organs as well as the physiological conditions those tissues are subject to. These devices are useful tools in modeling not only the behavior of a healthy organ but also in modeling disease pathology or the effects of specific drugs. The incorporation of fluidic flow is of great significance in these devices due to the important roles of physiological fluid flows in vivo. Recent developments in the field have led to the production of vascularized organ-on-a-chip devices, which can more accurately reproduce the conditions observed in vivo by recapitulating the vasculature of the organ concerned. This review paper will provide a brief overview of the history of organ-on-a-chip devices, before discussing developments in the production of vascularized organs-on-chips, and the implications these developments hold for the future of the field.
RESUMO
Due to a combination of asymptomatic or undiagnosed infections, the proportion of the United States population infected with SARS-CoV-2 was unclear from the beginning of the pandemic. We previously established a platform to screen for SARS-CoV-2 positivity across a representative proportion of the US population, from which we reported that almost 17 million Americans were estimated to have had undocumented infections in the Spring of 2020. Since then, vaccine rollout and prevalence of different SARS-CoV-2 variants have further altered seropositivity trends within the United States population. To explore the longitudinal impacts of the pandemic and vaccine responses on seropositivity, we re-enrolled participants from our baseline study in a 6- and 12- month follow-up study to develop a longitudinal antibody profile capable of representing seropositivity within the United States during a critical period just prior to and during the initiation of vaccine rollout. Initial measurements showed that, since July 2020, seropositivity elevated within this population from 4.8% at baseline to 36.2% and 89.3% at 6 and 12 months, respectively. We also evaluated nucleocapsid seropositivity and compared to spike seropositivity to identify trends in infection versus vaccination relative to baseline. These data serve as a window into a critical timeframe within the COVID-19 pandemic response and serve as a resource that could be used in subsequent respiratory illness outbreaks.
RESUMO
The development of antibiotic resistance among bacterial strains is a major global public health concern. To address this, drug-free antibacterial approaches are needed. Copper surfaces have long been known for their antibacterial properties. In this work, a one-step surface modification technique is used to assemble 2D copper chloride nanoplatelets directly onto copper surfaces such as copper tape, transmission electron microscopy (TEM) grids, electrodes, and granules. The nanoplatelets are formed using copper ions from the copper surfaces, enabling their direct assembly onto these surfaces in a one-step process that does not require separate nanoparticle synthesis. The synthesis of the nanoplatelets is confirmed with TEM, scanning electron microscopy, energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). Antibacterial properties of the Cu nanoplatelets are demonstrated in multidrug-resistant (MDR) Escherichia coli, MDR Acinetobacter baumannii, MDR Staphylococcus aureus, E. coli, and Streptococcus mutans. Nanoplatelets lead to a marked improvement in antibacterial properties compared to the copper surfaces alone, affecting bacterial cell morphology, preventing bacterial cell division, reducing their viability, damaging bacterial DNA, and altering protein expression. This work presents a robust method to directly assemble copper nanoplatelets onto any copper surface to imbue it with improved antibacterial properties.
Assuntos
Antibacterianos , Nanopartículas Metálicas , Antibacterianos/química , Antibacterianos/farmacologia , Bactérias , Cloretos , Cobre/química , Cobre/farmacologia , DNA Bacteriano , Escherichia coli , Nanopartículas Metálicas/química , Testes de Sensibilidade Microbiana , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
Pumpless microfluidic systems are easy-to-use devices that can be used to culture cells that are sensitive to mechanical shear, such as lymphatic endothelial cells. However, previously developed pumpless systems either provide unidirectional shear where the cell culture medium is discarded, or bidirectional shear that produces endothelial cell cultures with disease characteristics. Here, we describe a PDMS-based system that produces cyclically rising and falling shear that is unidirectional, similar to what has been reported in lymphatic vessels. The system can recirculate cell culture medium, making it possible for proteins and growth factors produced by the cell culture to remain in circulation. In addition, we describe the custom-made rotating platform that we used to create this unique flow pattern. Using this rotating platform, the microfluidic device can be used to grow confluent layers of lymphatic endothelial cells under physiologically relevant growth conditions.
Assuntos
Vasos Linfáticos , Microfluídica , Técnicas de Cultura de Células , Meios de Cultura , Células Endoteliais , Dispositivos Lab-On-A-ChipRESUMO
We disclose for the first time a facile synthetic methodology for the preparation of multicolor carbon dots (CDs) from a single source barring any chromatographic separations. This was achieved via sequential intraparticle cross-linking of surface abundant carboxylic acid groups on the CDs synthesized from a precursor to control their photoluminescence (PL) spectra as well as affect their degree of cellular internalization in cancer cells. The change in PL spectra with sequential cross-linking was projected by theoretical density functional theory (DFT) studies and validated by multiple characterization tools such as X-ray photoelectron spectroscopy (XPS), PL spectroscopy, ninhydrin assay, etc. The variation in cellular internalization of these cross-linked CDs was demonstrated using inhibitor assays, confocal microscopy, and flow cytometry. We supplemented our findings with high-resolution dark-field imaging to visualize and confirm the colocalization of these CDs into distinct intracellular compartments. Finally, to prove the surface-state controlled PL mechanisms of these cross-linked CDs, we fabricated a triple-channel sensor array for the identification of different analytes including metal ions and biologically relevant proteins.
Assuntos
Materiais Biocompatíveis/farmacocinética , Carbono/farmacocinética , Reagentes de Ligações Cruzadas/farmacocinética , Corantes Fluorescentes/farmacocinética , Luminescência , Pontos Quânticos/química , Materiais Biocompatíveis/química , Carbono/química , Linhagem Celular Tumoral , Reagentes de Ligações Cruzadas/química , Teoria da Densidade Funcional , Corantes Fluorescentes/química , Humanos , Teste de Materiais , Estrutura Molecular , Imagem Óptica , Processos Fotoquímicos , Espectroscopia Fotoeletrônica , Propriedades de SuperfícieRESUMO
With few exceptions, humans are incapable of fully recovering from severe physical trauma. Due to these limitations, the field of regenerative medicine seeks to find clinically viable ways to repair permanently damaged tissue. There are two main approaches to regenerative medicine: promoting endogenous repair of the wound, or transplanting a material to replace the injured tissue. In recent years, these two methods have fused with the development of biomaterials that act as a scaffold and mobilize the body's natural healing capabilities. This process involves not only promoting stem cell behavior, but by also inducing activity of the immune system. Through understanding the immune interactions with biomaterials, we can understand how the immune system participates in regeneration and wound healing. In this review, we will focus on biomaterials that promote endogenous tissue repair, with discussion on their interactions with the immune system.
RESUMO
Carbon dots are biocompatible nanoparticles suitable for a variety of biomedical applications. Careful selection of carbon dot precursors and surface modification techniques has allowed for the development of carbon dots with strong near-infrared fluorescence emission. However, carbon dots that provide strong fluorescence contrast would prove even more useful if they were also responsive to stimuli. In this work, endogenous bile pigments bilirubin (BR) and biliverdin (BV) were used for the first time to synthesize stimuli-responsive carbon dots (BR-CDots and BV-CDots respectively). The precursor choice lends these carbon dots spectroscopic characteristics that are enzyme-responsive and pH-responsive without the need for surface modifications post-synthesis. Both BV- and BR-CDots are water-dispersible and provide fluorescence contrast, while retaining the stimuli-responsive behaviors intrinsic to their precursors. Nanoparticle Tracking Analysis revealed that the hydrodynamic size of the BR-CDots and BV-CDots decreased with exposure to bilirubin oxidase and biliverdin reductase, respectively, indicating potential enzyme-responsive degradation of the carbon dots. Fluorescence spectroscopic data demonstrate that both BR-CDots and BV-CDots exhibit changes in their fluorescence spectra in response to changes in pH, indicating that these carbon dots have potential applications in pH sensing. In addition, BR-CDots are biocompatible and provide near-infrared fluorescence emission when excited with light at wavelengths of 600 nm or higher. This work demonstrates the use of rationally selected carbon sources for obtaining near-infrared fluorescence and stimuli-responsive behavior in carbon dots that also provide strong fluorescence contrast.
Assuntos
Nanopartículas , Pontos Quânticos , Pigmentos Biliares , Carbono , Espectrometria de FluorescênciaRESUMO
Identification and approval of new drugs for use in patients requires extensive preclinical studies and clinical trials. Preclinical studies rely on in vitro experiments and animal models of human diseases. The transferability of drug toxicity and efficacy estimates to humans from animal models is being called into question. Subsequent clinical studies often reveal lower than expected efficacy and higher drug toxicity in humans than that seen in animal models. Microphysiological systems (MPS), sometimes called organ or human-on-chip models, present a potential alternative to animal-based models used for drug toxicity screening. This review discusses multi-organ MPS that can be used to model diseases and test the efficacy and safety of drug candidates. The translation of an in vivo environment to an in vitro system requires physiologically relevant organ scaling, vascular dimensions, and appropriate flow rates. Even small changes in those parameters can alter the outcome of experiments conducted with MPS. With many MPS devices being developed, we have outlined some established standards for designing MPS devices and described techniques to validate the devices. A physiologically realistic mimic of the human body can help determine the dose response and toxicity effects of a new drug candidate with higher predictive power.
RESUMO
Increasing the fluorescence quantum yield of fluorophores is of great interest for in vitro and in vivo biomedical imaging applications. At the same time, photobleaching and photodegradation resulting from continuous exposure to light are major considerations in the translation of fluorophores from research applications to industrial or healthcare applications. A number of tetrapyrrolic compounds, such as heme and its derivatives, are known to provide fluorescence contrast. In this work, we found that biliverdin (BV), a naturally-occurring tetrapyrrolic fluorophore, exhibits an increase in fluorescence quantum yield, without exhibiting photobleaching or degradation, in response to continuous ultraviolet (UV) irradiation. We attribute this increased fluorescence quantum yield to photoisomerization and conformational changes in BV in response to UV irradiation. This enhanced fluorescence can be further altered by chelating BV with metals. UV irradiation of BV led to an approximately 10-fold increase in its 365 nm fluorescence quantum yield, and the most favorable combination of UV irradiation and metal chelation led to an approximately 18.5-fold increase in its 365 nm fluorescence quantum yield. We also evaluated these stimuli-responsive behaviors in biliverdin nanoparticles (BVNPs) at the bulk-state and single-particle level. We determined that UV irradiation led to an approximately 2.4-fold increase in BVNP 365 nm quantum yield, and the combination of UV irradiation and metal chelation led to up to a 6.75-fold increase in BVNP 365 nm quantum yield. Altogether, these findings suggest that UV irradiation and metal chelation can be utilized alone or in combination to tailor the fluorescence behavior of imaging probes such as BV and BVNPs at selected wavelengths.
Assuntos
Biliverdina , Nanopartículas , Fluorescência , Corantes Fluorescentes , Metais , Raios UltravioletaRESUMO
The outcome of radiotherapy is significantly restricted by tumor hypoxia. To overcome this obstacle, one prevalent solution is to increase intratumoral oxygen supply. However, its effectiveness is often limited by the high metabolic demand for O2 by cancer cells. Herein, we develop a hybrid semiconducting organosilica-based O2 nanoeconomizer pHPFON-NO/O2 to combat tumor hypoxia. Our solution is twofold: first, the pHPFON-NO/O2 interacts with the acidic tumor microenvironment to release NO for endogenous O2 conservation; second, it releases O2 in response to mild photothermal effect to enable exogenous O2 infusion. Additionally, the photothermal effect can be increased to eradicate tumor residues with radioresistant properties due to other factors. This "reducing expenditure of O2 and broadening sources" strategy significantly alleviates tumor hypoxia in multiple ways, greatly enhances the efficacy of radiotherapy both in vitro and in vivo, and demonstrates the synergy between on-demand temperature-controlled photothermal and oxygen-elevated radiotherapy for complete tumor response.
Assuntos
Óxido Nítrico/metabolismo , Compostos de Organossilício/metabolismo , Oxigênio/metabolismo , Fotoquimioterapia/métodos , Fármacos Fotossensibilizantes/metabolismo , Pontos Quânticos/metabolismo , Linhagem Celular Tumoral , Humanos , Compostos de Organossilício/química , Fármacos Fotossensibilizantes/uso terapêutico , Pontos Quânticos/química , Pontos Quânticos/uso terapêutico , Radioterapia/efeitos adversos , Hipóxia Tumoral/efeitos dos fármacos , Hipóxia Tumoral/efeitos da radiação , Microambiente Tumoral/efeitos dos fármacos , Microambiente Tumoral/efeitos da radiaçãoRESUMO
This article is written to provide an up-to-date review of pyrrole-based biomedical materials. Porphyrins and other tetrapyrrolic molecules possess unique magnetic, optical and other photophysical properties that make them useful for bioimaging and therapy. This review touches briefly on some of the synthetic strategies to obtain porphyrin- and tetrapyrrole-based nanoparticles, as well as the variety of applications in which crosslinked, self-assembled, porphyrin-coated and other nanoparticles are utilized. We explore examples of these nanoparticles' applications in photothermal therapy, drug delivery, photodynamic therapy, stimuli response, fluorescence imaging, photoacoustic imaging, magnetic resonance imaging, computed tomography and positron emission tomography. We anticipate that this review will provide a comprehensive summary of pyrrole-derived nanoparticles and provide a guideline for their further development.
Assuntos
Nanopartículas , Imagem Óptica , Fotoquimioterapia , Porfirinas , PirróisRESUMO
Nanomedicine has proven promising in preclinical studies. However, only few formulations have been successfully translated to clinical use. A thorough understanding of how nanoparticles interact with cells in vivo is essential to accelerate the clinical translation of nanomedicine. Intravital imaging is a crucial tool to reveal the mechanisms of nanoparticle transport in vivo, allowing for the development of new strategies for nanomaterial design. Here, we first review the most recent progress in using intravital imaging to answer fundamental questions about nanoparticle delivery in vivo. We then elaborate on how nanoparticles interact with different cell types and how such interactions determine the fate of nanoparticles in vivo. Lastly, we discuss ways in which the use of intravital imaging can be expanded in the future to facilitate the clinical translation of nanomedicine.
Assuntos
Microscopia Intravital , Nanopartículas , Nanomedicina Teranóstica , Animais , Células Endoteliais/metabolismo , Humanos , Microscopia Intravital/métodos , Macrófagos/metabolismo , Imagem Molecular/métodos , Monócitos/metabolismo , Nanopartículas/química , Neutrófilos/metabolismo , Permeabilidade , Nanomedicina Teranóstica/métodosRESUMO
Metal-organic frameworks (MOFs) have applications in numerous fields. However, the development of MOF-based "theranostic" macroscale devices is not achieved. Here, heparin-coated biocompatible MOF/poly(ε-caprolactone) (PCL) "theranostic" stents are developed, where NH2 -Materials of Institute Lavoisier (MIL)-101(Fe) encapsulates and releases rapamycin (an immunosuppressive drug). These stents also act as a remarkable source of contrast in ex vivo magnetic resonance imaging (MRI) compared to the invisible polymeric stent. The in vitro release patterns of heparin and rapamycin respectively can ensure a type of programmed model to prevent blood coagulation immediately after stent placement in the artery and stenosis over a longer term. Due to the presence of hydrolysable functionalities in MOFs, the stents are shown to be highly biodegradable in degradation tests under various conditions. Furthermore, there is no compromise of mechanical strength or flexibility with MOF compositing. The system described here promises many biomedical applications in macroscale theranostic devices. The use of MOF@PCL can render a medical device MRI-visible while simultaneously acting as a carrier for therapeutic agents.
Assuntos
Stents Farmacológicos , Estruturas Metalorgânicas , Imageamento por Ressonância Magnética , Estruturas Metalorgânicas/farmacologia , Sirolimo/farmacologia , StentsRESUMO
The lymphatic system is a complex organ system that is essential in regulating the development of host immune responses. Because of the complexity of the lymphatic system and the existence of few in vitro models that replicate human lymphatic vessels, there is a need for a primary cell-based lymphatic model that can provide a better understanding of the effects of flow parameters, therapeutics, and other stimuli on lymphatic vessel behavior. In this report, a fluidic device models the cyclical lymphatic flow under normal and disease conditions. The device utilizes a pumpless design, operating with gravitational forces to simulate normal conditions with a shear of 0.092 Pa (0.92 dyn/cm2) as well as disease conditions with an increased shear of (0.67 Pa, 6.7 dyn/cm2). The cyclical pumping present in lymphatic vessels is replicated by applying shear stress for a period of 10 s multiple times per minute. Primary human lymphatic endothelial cells (HLECs) cultured in the device for 10 days produce less interleukin 8 (IL-8), and tumor necrosis factor alpha (TNF-α) per cell than cells cultured under static conditions. The results are consistent with previously published in vivo measurements, indicating that the fluidic device mimics conditions for IL-8 and TNF-α expression well. Data obtained with the devices also indicate that primary HLECs proliferate faster under high-shear than under low-shear conditions.
RESUMO
Small bowel perforations and obstructions are relatively frequent surgical emergencies, are potentially life-threatening, and have multiple etiologies. In general, treatment requires urgent surgical repair or resection and at times can lead to further complications. Stents may be used to help with healing intestinal perforations but use is limited as currently available stents are non-absorbable, are manufactured in a narrow size range, and/or are limited to usage in locations that are accessible for endoscopic removal post-healing. The use of 3D-printed bioresorbable polymeric stents will provide patients with a stent that can prevent leakage, is tailored specifically to their geometry, and will be usable within the small bowel, which is not amenable to endoscopic stent placement. This work focused on the rapid manufacturing of gastrointestinal stents composed of a polycaprolactone-polydioxanone (PCL-PDO) composite. Dynamic Mechanical Analysis (DMA) tests were conducted to separately analyze the effects of composition, the filament formation process, and physiological temperature on the PCL-PDO material properties. The proposed stent design was then modeled using computer-aided design, and Finite Element Analysis (FEA) was used to simulate the effects of physiologically relevant forces on stent integrity. The presence of hydrolysable ester bonds was confirmed using FT-IR spectroscopy. In vitro studies were used to evaluate the biocompatibility of the polymer composite. Further analyses were conducted through stent placement in ex vivo pig intestines. PCL-PDO stents were then 3D-printed and placed in vivo in a pig model.
Assuntos
Trato Gastrointestinal , Stents , Animais , Análise de Elementos Finitos , Humanos , Espectroscopia de Infravermelho com Transformada de Fourier , Suínos , Tomografia Computadorizada por Raios XRESUMO
We have developed a pumpless cell culture chip that can recirculate small amounts of cell culture medium (400 µL) in a unidirectional flow pattern. When operated with the accompanying custom rotating platform, the device produces an average wall shear stress of up to 0.588 Pa ± 0.006 Pa without the use of a pump. It can be used to culture cells that are sensitive to the direction of flow-induced mechanical shear such as human umbilical vein endothelial cells (HUVECs) in a format that allows for large-scale parallel screening of drugs. Using the device we demonstrate that HUVECs produce pro-inflammatory indicators (interleukin 6, interleukin 8) under both unidirectional and bidirectional flow conditions, but that the secretion was significantly lower under unidirectional flow. Our results show that pumpless devices can simulate the endothelium under healthy and activated conditions. The developed devices can be integrated with pumpless tissues-on-chips, allowing for the addition of barrier tissues such as endothelial linings.