Green banana (Musa ssp.) mixed pulp and peel flour: A new ingredient with interesting bioactive, nutritional, and technological properties for food applications.

This study aimed to characterize and evaluate the in vitro bioactive properties of green banana pulp (GBPF), peel (GBPeF), and mixed pulp/peel flours M1 (90/10) and M2 (80/20). Lipid concentration was higher in GBPeF (7.53%), as were the levels of free and bound phenolics (577 and 653.1 mg GAE/100 g, respectively), whereas the resistant starch content was higher in GBPF (44.11%). Incorporating up to 20% GBPeF into the mixed flour had a minor effect on the starch pasting properties of GBPF. GBPeF featured rutin and trans-ferulic acid as the predominant free and bound phenolic compounds, respectively. GBPF presented different major free phenolics, though it had similar bound phenolics to GBPeF. Both M1 and M2 demonstrated a reduction in intracellular reactive oxygen species (ROS) generation. Consequently, this study validates the potential of green banana mixed flour, containing up to 20% GBPeF, for developing healthy foods and reducing post-harvest losses.

Evaluation of the Physical, Chemical, Technological, and Sensorial Properties of Extrudates and Cookies from Composite Sorghum and Cowpea Flours.

In recent years, there has been a growing demand for gluten-free and functional products, driven by consumer preferences for healthier and more diverse food choices. Therefore, there is a need to explore new ingredients that can be used as alternatives to traditional gluten-containing grains. Thus, this work evaluated the physical, chemical, technological, and sensorial properties of extrudates and cookies from composite tannin sorghum (rich in resistant starch) and white cowpea flours. Extrudates and cookies were produced from a composite flour made of sorghum and cowpea, at a sorghum:cowpea flour ratio of 70:30, 50:50, and 30:70. Then, raw flours, cookies, and extrudates were characterized (dietary fiber, resistant starch, proteins, antioxidant capacity, pasting properties, etc.). Results obtained for particle size distribution and bulk density indicated that the particles increased and the color changed with the addition of cowpea flour. The raw tannin sorghum flour had a higher resistant starch concentration (36.3%) and antioxidant capacity (211.2 µmolTE/g), whereas cowpea flour had higher levels of proteins (18.7%) and dietary fiber (20.1%). This difference in the raw flour composition contributed to the nutritional value of the extrudates and cookies, especially the cookies which undergo dry heat and had higher retention of resistant starch and antioxidants. Moreover, sorghum flour presented a higher tendency to retrograde (high setback), which was decreased by the addition of cowpea flour. Overall acceptance and intention to purchase were higher for extrudates with 100% sorghum flour (6.52 and 68.3%, respectively) and cookies with 70% cowpea flour (7.03 and 76.7%, respectively). Therefore, nutritious and functional gluten-free extrudates and cookies, of good acceptability, can be produced from composite tannin sorghum and white cowpea flours.

Young culm of Dendrocalamus asper, Bambusa tuldoides and B. Vulgaris as source of hemicellulosic dietary fibers for the food industry.

Bamboo is a grass that has gained economic attention in the food industry as a source of dietary fiber, and the young bamboo culm may be an alternative to supply fibers to the market. The objective was to evaluate and characterize different portions (bottom, middle and top) of the young bamboo culm fibrous fractions from Dendrocalamus asper, Bambusa tuldoides and B. vulgaris regarding their color parameters, physicochemical composition and hemicellulosic polysaccharide characterization. Fibrous fractions were obtained after starch extraction and results showed high amounts of total dietary fiber (79-89%). The hemicellulosic polysaccharide contents (35.4-41.5%) demonstrated great potential for commercial extraction and so, we extracted them with alkali and fractionated regarding their solubility in cold-water. Insoluble polysaccharides (KP fractions) were obtained in higher yields (from 21.2% to 38.5%) than the soluble ones (KS fractions, yields from 2.3% to 5.2%). Monosaccharide composition showed mainly xylose and arabinose, with some minor amounts of mannose and galactose in some fractions. In a detailed NMR analysis, the presence of neutral xylans and arabinoxylans could be observed in all studied bamboo species, which can be used in food products and also in the production of xylooligosaccharides (XOS), biomaterials and biofuels.

Bambusa vulgaris starch: Characterization and technological properties.

The starch industry has grown quickly, and starch production has expanded around the world because it is a very versatile ingredient, despite limits in some foodstuffs. So, this study aimed to analyze morphology, physic and chemical characteristics of the starch extracted from three different parts (bottom, middle and top) of the young bamboo culm of B. vulgaris (SB, SM, and ST, respectively). The obtained data were evaluated by analysis of variance and Scott-Knot test (p < 0.05), and no significant difference was observed between SB, SM and ST samples. The starches presented yellowish coloration (L* > 88, a* > -0.2, and b* > 9), and SEM images showed compound granules with polyhedral shapes and average diameter of 6.55 µm; apparent amylose content of 37.45%, wherein SB and SM showed characteristics of resistant starch type 2, whereas ST was more similar to normal starch. Amylopectin presented high proportion of chains with DP 13-24 and lower proportion of long chains, corroborating with A-type crystalline pattern. The absence of a shoulder in the branch chain length distribution, suggest a perfect crystalline structure, similar to starches from D. asper and B. tuldoides. DSC shows gelatinization temperatures higher than 80 °C, lower transition temperatures and the percentage of retrogradation above 44%. The results are promising to obtain slow digesting starches, although it is necessary to evaluate the starch from other bamboo species, which may have different characteristics.

Characterization of young bamboo culm starch from Dendrocalamus asper.

The search for new and natural ingredients has been stimulated by the food and non-food industries, and the fresh young bamboo culm of Dendrocalamus asper emerges as promising for industrial production due to its composition with >10% of starch. So, this study aimed to characterize starch, extracted in aqueous solution, from three different parts (bottom, middle and top) of the young bamboo culm of D. asper (SB, SM and ST, respectively). Morphological and physicochemical characteristics of the young bamboo culm starches were evaluated, besides thermal properties, and the obtained data were evaluated by ANOVA and Scott-Knot test (p < 0.05). The starches presented pale yellow coloration, with high luminosity (L*  > 89), and lower index in the red region. SEM images showed compound granules, which under polarized light exhibit a Maltese cross. The starches presented polyhedral shape and small size with an average diameter of 5.4 µm. All the samples presented low moisture (7.0 g/100 g), protein (2.0 g/100 g), lipid (0.3 g/100 g) and ash (1.0 g/100 g) contents. ST and SB showed apparent amylose content similar to starches from cereals and isolated from bamboo seeds. This agress to molecular size distribution of starch chains, since the SB, SM and ST presented amylopectin levels higher than those of amylose, as well as normal starches. The chain length of amylopectin presented the main peak at DP 12-13 and the second on at DP 43, similar to cereals like wheat, rice and barley. Its chain has higher proportion of short chains, which corroborates with the A-type polymorph presented. Concerning about thermal properties, all the samples presented high gelatinization temperature (>78 °C) and low enthalpies values (<6.35 J·g-1), which indicates the greater molecular organization. The gelatinization temperatures of gelatinized starches were lower than the native ones. The physicochemical and thermal characteristics of the obtained starches corroborate with the success of the extraction, which keep the starch granule native, and were similar to those of other starches already used in food and non-food products.

Young bamboo culm: Potential food as source of fiber and starch.

With the objective of widening the use of bamboo in the food industry, the present work aimed to produce and characterize the young bamboo culm flours from varieties Dendrocalamus asper, Bambusa tuldoides and Bambusa vulgaris as potential sources of fiber and starch. The young culms were collected, cut in three sections (bottom, middle, top), processed into flour, and they were physically, chemically and technologically analyzed. The data were obtained in triplicate and evaluated by means of average differences, using analysis of variance (ANOVA) and Scott-Knott test (p<0.05). The young bamboo culms flours presented low values for moisture content (<10g/100g), protein, lipids and ash contents (<3g/100g). Regarding the carbohydrates profile, the flours were significantly different in their sugar, starch and total fiber contents. All flour samples presented a potential for fiber extraction (>60g/100g), and the varieties B. vulgaris and D. asper, presented an additional potential for starch extraction (16 and 10g/100g, respectively). Regarding technological characteristics, all flours presented bright yellow color, lightly acidic pH (>5.0), water solubility index (WSI) lower to 2.5%, excepting D. asper, which presented a WSI superior to 7.5%. In this way, the evaluated young bamboo culms present potential application in the food industry as flours and as source of fibers; in addition, the varieties D. asper and B. vulgaris can also be used for starch extraction.