Measurement of Giardia lamblia adhesion force using an integrated microfluidic assay.

The mechanisms how Giardias attach to the intestinal epithelium remain unclear. None of the methods currently being used to measure the attachment force could provide a continuous nutrition supply and a micro-aerobic atmosphere to the Giardia. Besides, they are all labor-intensive. In the present research, a microfluidic method based on electric circuit analogy was developed. The input fluid flowed through the inlet channel with different lengths and was distributed in four assay chambers. Shear force gradients were generated in chambers, too. This allowed an easy control of fluids and the shear forces. Most importantly, the shear stress large enough to detach Giardia could be generated in laminar flow regime. Moreover, analysis could be accomplished in one single test. By applying inlet flow rates of 30, 60, and 120 µL ml-1, shear force gradients ranging from 19.47 to 60.50 Pa were generated. The adhesion forces of trophozoites were analyzed and the EC50 of the force that caused 50% trophozoites detachment was calculated as 36.60 Pa. This paper presents a novel method for measurement of Giardia adhesion force. Graphical Abstract Measurement of Giardia adhesion force. Various of flow rates were applied to generate different shear forces and Giardia trophozoites remaining attached were counted (a-c). The percentages of attachment vs shear stress were plotted and the EC50 of adhesion force was calculated (d).

An on-chip pollutant toxicity determination based on marine microalgal swimming inhibition.

We report the use of microalgal swimming behavior as a sensor signal integrated into microfluidics for a rapid and high-throughput determination of pollutant toxicity. There are two types of chip. A poly(dimethylsiloxane) (PDMS) 12-well chip, used for optimization of experimental conditions (i.e. light level, temperature, initial cellular density and exposure time), can perform twelve parallel tests simultaneously. In a concentration gradient generator (CGG) chip, a CGG connected with diffusible chambers enables a large number of dose-response bioassays to be performed in a simple way. Microalgal swimming was set as a microfluidic bioassay signal and was evaluated as swimming manner, motile percentage (%MOT), curvilinear velocity (VCL), average path velocity (VAP) and straight line velocity (VSL). Under optimized physical conditions, the toxicities of Cu, Pb, phenol and nonylphenol (NP) towards four mobile marine microalgae, Platymonas subcordiformis, Platymonas helgolandica var. tsingtaoensis, Isochrysis galbana and Isochrysis zhanjiangensis sp. nov, were investigated. In all cases, a toxic response (i.e. a dose-related inhibition of swimming) was detected, and a time of only 2 h was needed to predict EC50 values. The 2h-EC50s showed that I. galbana was the most tolerant and that P. subcordiformis was one of the most sensitive. Based on the relative motile percentage data, the EC50 values for Cu of I. galbana and P. subcordiformis were 6.04 and 1.67 µM, respectively, while for Pb the EC50 values were 15.30 and 3.87 µM, for phenol the EC50 values were 8.69 and 6.08 mM, and for NP the EC50 values were 29.65 and 14.47 µM, respectively. Taking into account all the swimming inhibition parameters, MOT provided more sensitive EC results. The sensitivity differences between the velocity parameters (VCL, VAP and VSL) were ascribed to differences in swimming manner of the different classes of microalgae.