RESUMO
In this paper, we investigate a 1018 nm gain-switched ytterbium-doped fiber oscillator at a low repetition rate in terms of theory and experiment. Theoretically, a numerical model applicable to a 1018 nm gain-switched ytterbium-doped fiber laser was established. The influence of the pump peak power and active fiber lengths on the 1018 nm gain-switched ytterbium-doped fiber laser was numerically simulated. Experimentally, a compact 1018 nm all-fiber-structured pulsed laser oscillator is constructed, in which a pulse width of 110 ns and a single-pulse energy of 0.1 mJ were obtained. Moreover, the experimental results are in agreement with the numerical simulation ones. To the best of our knowledge, this is the first time that gain-switching technology has been applied to 1018 nm fiber lasers to generate nanosecond pulsed lasers. The model and experimental results can provide a reference for the engineering design of the same type of low repetition rate fiber lasers below the kilohertz level.
RESUMO
PbZrO3-based antiferroelectric (AFE) ceramic materials have emerged as potential candidates for the next generation of high-energy multilayer ceramic capacitors (MLCCs) because of their distinctive characteristics of double hysteresis loops. The energy storage efficiency of orthorhombic AFE ceramics with ultrahigh storage density is relatively low, which hinders their practical application. In this study, the low efficiency limit of PLZST-based orthorhombic ceramics was overcome by precisely adjusting the Sn4+ content in the (Pb0.95Ca0.02La0.02)(Zr0.99-xSnxTi0.01)O3 AFE ceramics. On one hand, the addition of Sn4+ disrupts the original long-range dipole and improves the rapid response of polarization reversal under the applied voltage. As a result, the difference in electric hysteresis under an electric field is reduced, leading to a significant improvement in energy storage efficiency. On the other hand, increasing the Sn4+ content suppresses the formation of oxygen vacancies, inhibiting grain growth and strengthening grain bonding. This results in ceramics with a high breakdown field strength. Ultimately, the resulting PLCZST ceramics reveal an expressively improved recoverable energy density of 10.2 J cm-3 together with a high energy efficiency of 91.4% under a high applied electric field of 560 kV cm-1. The present study demonstrates the tunability of performance in orthorhombic PLZST AFE ceramics, thereby introducing a ceramic material with exceptional energy storage capabilities for MLCC applications.
RESUMO
The requirement for cryogenic supramolecular self-assembly of amphiphiles in subzero environments is a challenging topic. Here, the self-assembly of lamellar lyotropic liquid crystals (LLCs) are presented to a subzero temperature of -70 °C. These lamellar nanostructures are assembled from specifically tailored ultra-long-chain surfactant stearyl diethanolamine (SDA) in water/glycerol binary solvent. As the temperature falls below zero, LLCs with a liquid-crystalline Lα phase, a tilted Lß phase, and a new folded configuration are obtained consecutively. A comprehensive experimental and computational study is performed to uncover the precise microstructure and formation mechanism. Both the ultra-long alkyl chain and head group of SDA play a crucial role in the formation of lamellar nanostructures. SDA head group is prone to forming hydrogen bonds with water, rather than glycerol. Glycerol cannot penetrate the lipid layer, which mixes with water arranging outside of the lipid bilayer, providing an ideal anti-freezing environment for SDA self-assembly. Based on these nanostructures and the ultra-low freezing point of the system, a series of novel cryogenic materials are created with potential applications in extremely cold environments. These findings would contribute to enriching the theory and research methodology of supramolecular self-assembly in extreme conditions and to developing novel anti-freezing materials.
RESUMO
A high-power all-fiber radially polarized laser system is demonstrated, in which an integrated nanograting mode convertor (S-wave plate) is used for the generation of radially polarized beam. Experimentally, a 1-W radially polarized beam was used as the seed laser, whose mode purity and mode extinction ratio (MER) were 96.5% and 98.3%, respectively. A single-stage few-mode fiber amplifier was employed to boost the 1-W seed laser to an average power of 113.2â W, when the pump power was 160â W. The corresponding slope efficiency and beam quality factor (M2) were approximately 72% and 2.3%, respectively. Moreover, the mode purity and MER of the amplified radially polarized laser were measured to be 95.7% and 97%, respectively. To the best of our knowledge, this is the highest output power from an all-fiber radially polarized laser system without obvious degradations of the mode purity and MER.