Alkaline-Metal Cations Affect Pt Deactivation for the Electrooxidation of Small Organic Molecules by Affecting the Formation of Inactive Pt Oxide.

The activity of Pt for the electro-oxidation of several organic molecules changes with the cation of the electrolyte. It has been proposed that the underlying reason behind that effect is the so-called noncovalent interactions between the hydrated cations and adsorbed OH (OHad). However, there is a lack of spectroscopic evidence for this phenomenon, resulting in an incomplete understanding at the microscopic level of these electrochemical processes. Herein, we explore the electro-oxidation of glycerol (EOG) on platinum (Pt) in LiOH, NaOH and KOH using in situ surface-enhanced infrared absorption spectroscopy in the attenuated total reflectance mode (ATR-SEIRAS) and in situ X-ray absorption spectroscopy (XAS). Our results show that the electrolyte cation influences the rate and potential at which adsorbed CO (COad), a catalytic poison, is formed and oxidized. We attribute this to the cation-dependent stability of oxygenated species on the metallic Pt surface and the different intensities of the electric field at the electrode/electrolyte interface. We also demonstrate that the formation of an inactive Pt oxide layer is indirectly also cation-dependent: the formation of this layer is triggered by the cation-dependent oxidative removal of reaction intermediates (for instance, CO). This phenomenon explains the well-known cation-induced differences in the voltammetric profiles, of not just glycerol, but generally of alcohols and polyols.

Glycerol Electrolyzer with Graphite Anode and Cathode Produces Carbonyl Compounds and Hydrogen: Background Electrocatalysis of a "Nonparticipating" Current Collector.

This study unveils a novel role of bare graphite as a catalyst in glycerol electrooxidation and hydrogen evolution reactions, challenging the prevailing notion that current collectors employed in electrolyzers are inert. Half-cell experiments elucidate the feasibility of glycerol oxidation and hydrogen production on bulk graphite electrodes at potentials exceeding 1.7 V. The investigation of varying glycerol concentrations (0.05 to 1.5 mol L-1) highlights a concentration-dependent competition between glycerol electrooxidation and oxygen evolution reactions. Employing an H-type glycerol electrolyzer, polarization curves reveal significant activation polarization attributed to the low electroactivity of the anode. Glycerol electrolysis at different concentrations yields diverse product mixtures, including formate, glycolate, glycerate, and lactate at the anode, with concurrent hydrogen generation at the cathode. The anolyte composition changes with glycerol concentration, resulting in less-oxidized compounds at higher concentrations and more oxidized compounds at lower concentrations. The cell voltage also influences the product formation selectivity, with an increased voltage favoring more oxidized compounds. The glycerol concentration also affects hydrogen production, with lower concentrations yielding higher hydrogen amounts, peaking at 3.5 V for 0.05 mol L-1. This model quantitatively illustrates graphite's contribution to current and product generation in glycerol electrolyzers, emphasizing the significance of background current and products originating from current collectors if in contact with the reactants. These results have an impact on the efficiency of the electrolyzer and raise questions regarding possible extra non-noble "nonparticipating" current collectors that could affect overall performance. This research expands our understanding of electrocatalysis on graphite surfaces with potential applications in optimizing electrolyzer configurations for enhanced efficiency and product selectivity.

Dynamic Thermal Treatments in Green Coconut Water Induce Dynamic Stress Adaptation of Listeria innocua That Increases Its Thermal Resistance.

The global coconut water market is projected to grow in the upcoming years, attributed to its numerous health benefits. However, due to its susceptibility to microbial contamination and the limitations of non-thermal decontamination methods, thermal treatments remain the primary approach to ensure the shelf-life stability and the microbiological safety of the product. In this study, the thermal inactivation of Listeria innocua, a Listeria monocytogenes surrogate, was evaluated in coconut water and in tryptone soy broth (TSB) under both isothermal (50-60 °C) and dynamic conditions (from 30 to 60 °C, with temperature increases of 0.5, 1 and 5 °C/min). Mathematical models were used to analyse the inactivation data. The Geeraerd model effectively described the thermal inactivation of L. innocua in both TSB and coconut water under isothermal conditions, with close agreement between experimental data and model fits. Parameter estimates and analysis revealed that acidified TSB is a suitable surrogate medium for studying the thermal inactivation of L. innocua in coconut water, despite minor differences observed in the shoulder length of inactivation curves, likely attributed to the media composition. The models fitted to the data obtained at isothermal conditions fail to predict L. innocua responses under dynamic conditions. This is attributed to the stress acclimation phenomenon that takes place under dynamic conditions, where bacterial cells adapt to initial sub-lethal treatment stages, leading to increased thermal resistance. Fitting the Bigelow model directly to dynamic data with fixed z-values reveals a three-fold increase in D-values with lower heating rates, supporting the role of stress acclimation. The findings of this study aid in designing pasteurization treatments targeting L. innocua in coconut water and enable the establishment of safe, mild heat treatments for refrigerated, high-quality coconut water.

Disentangling the contributions of initial heterogeneities and dynamic stress adaptation to nonlinearities in bacterial survival curves.

The deviations from log-linearity that are often observed in bacterial survivor curves can be explained using different arguments, both biological and experimental. In this study, we used Bacillus subtilis as a model organism to demonstrate that the generally accepted vitalistic arguments (initial heterogeneities in the stress resistance of the cells in the population) may fail to describe microbial inactivation in some situations. In this sense, we showed how dynamic stress acclimation during an isothermal treatment provides an alternative explanation for survivor curves with an upwards curvature. We also provided an innovative experimental approach based on preadaptation experiments to evaluate which hypothesis is more suitable for the bacterial response. Furthermore, we used our experimental results to define bounds for the possible stress acclimation that may take place during dynamic treatments, concluding that the magnitude of stress acclimation may be larger for dynamic treatments than for isothermal experiments. We also evaluated the contribution of the SigB general stress response system to heat resistance by comparing the heat survival of wt and the ΔsigB mutant. Both strains survived better in 51, 52.5 and 55 °C when cells were pre-adapted at 48 °C than non-pre-adapted cells. However, ΔsigB was less resistant to heat than wt due to the missing SigB general stress system. Although these conclusions were based on B. subtilis as a model organism, this study can be the first step towards the development of a novel methodology able to estimate dynamic effects using only isothermal experiments. This would improve the models developed within the predictive microbiology community, improving our ability to predict microbial inactivation during industrial treatments, which are most often dynamic.

Bioactive Compounds in Plasma as a Function of Sex and Sweetener Resulting from a Maqui-Lemon Beverage Consumption Using Statistical and Machine Learning Techniques.

The present study analyses the effect of a beverage composed of citrus and maqui (Aristotelia chilensis) with different sweeteners on male and female consumers. Beverages were designed and tested (140 volunteers) as a source of polyphenols, in a previous work. Plasma samples were taken before and after two months of daily intake. Samples were measured for bioactive-compound levels with metabolomics techniques, and the resulting data were analysed with advanced versions of ANOVA and clustering analysis, to describe the effects of sex and sweetener factors on bioactive compounds. To improve the results, machine learning techniques were applied to perform feature selection and data imputation. The results reflect a series of compounds which are more regulated for men, such as caffeic acid or 3,4-dihydroxyphenylacetic acid, and for women, trans ferulic acid (TFA) or naringenin glucuronide. Regulations are also observed with sweeteners, such as TFA with stevia in women, or vanillic acid with sucrose in men. These results show that there is a differential regulation of these two families of polyphenols by sex, and that this is influenced by sweeteners.

Application of High Hydrostatic Pressure in fresh purple smoothie: Microbial inactivation kinetic modelling and qualitative studies.

The inactivation kinetics of Listeria monocytogenes during High Hydrostatic Pressure (HHP) treatments was studied in a purple smoothie based of fresh fruit and vegetables. Pressure intensity studied was 300, 350, 400 and 450 MPa. Untreated samples were used as control. Furthermore, the effects on quality attributes (sensory, total soluble solids content, colour, titratable acidity, pH, vitamin C and total phenolics content) were also monitored. Microbial inactivation was modelled as a function of the HHP intensity using the Geeraerd model. Shoulder and tail effects were observed only for the 300 MPa pressure assayed, supporting a multiple hit kinetic inactivation of critical factors. Increasing the HHP intensity resulted in a faster inactivation with tailing. A strong positive correlation was observed between the pressure level and the inactivation rate (k). Hence, a linear model was used to describe the relationship between both variables. Nevertheless, further data are required to confirm this secondary model. Quality was mostly unaffected by the HHP treatments, except for the vitamin C content, which reported reductions of 26 and 21% after 300 and 350 MPa, respectively. In conclusion, HHP can be a viable technology for processing fruit and vegetable-based smoothies to preserve quality and safety. A pressure of 400 MPa is advisable to ensure an efficient microbial inactivation with the best sensory and nutritional quality retention.

Ifs and buts of non-thermal processing technologies for plant-based drinks' bioactive compounds.

Vegetables and fruits contain a variety of bioactive nutrients and non-nutrients that are associated with health promotion. Consumers currently demand foods with high contents of healthy compounds, as well as preserved natural taste and flavour, minimally processed without using artificial additives. Processing alternatives to be applied on plant-based foodstuffs to obtain beverages are mainly referred to as classical thermal treatments that although are effective treatments to ensure safety and extended shelf-life, also cause undesirable changes in the sensory profiles and phytochemical properties of beverages, thus affecting the overall quality and acceptance by consumers. As a result of these limitations, new non-thermal technologies have been developed for plant-based foods/beverages to enhance the overall quality of these products regarding microbiological safety, sensory traits, and content of bioactive nutrients and non-nutrients during the shelf-life of the product, thus allowing to obtain enhanced health-promoting beverages. Accordingly, the present article attempts to review critically the principal benefits and downsides of the main non-thermal processing alternatives (High hydrostatic pressure, pulsed electric fields, ultraviolet light, and ultrasound) to set up sound comparisons with conventional thermal treatments, providing a vision about their practical application that allows identifying the best choice for the sectoral industry in non-alcoholic fruit and vegetable-based beverages.

Microwave Treatment vs. Conventional Pasteurization: The Effect on Phytochemical and Microbiological Quality for Citrus-Maqui Beverages.

This study uncovered the impacts of microwave (MW) treatments compared to conventional pasteurization (TP) on the quality of functional citrus-maqui beverages, with added sucrose or stevia. The influence of these thermal treatments on the microbiological burden and phytochemical composition was determined by processing under two MW power levels (600 W and 800 W) and TP at 85 °C for 15 s for 60 days at room temperature (20 °C). The results indicated that, beyond the microbiological quality achieved in the juices treated by both MW and TP technology, there were no differences among the treatments regarding the stability of vitamin C, anthocyanin, and flavanone concentrations. However, anthocyanins were more stable in those beverages with sucrose added, rendering a better red color. Besides, all treatments ensured microbiological stability throughout the entire storage time. In conclusion, MW treatment could be considered as an alternative to TP, which ensures microbial safety, protecting functional compounds associated with health effects.

Role of Ni in PtNi Bimetallic Electrocatalysts for Hydrogen and Value-Added Chemicals Coproduction via Glycerol Electrooxidation.

Pt-based bimetallic electrocatalysts are promising candidates to convert surplus glycerol from the biodiesel industry to value-added chemicals and coproduce hydrogen. It is expected that the nature and content of the elements in the bimetallic catalyst can not only affect the reaction kinetics but also influence the product selectivity, providing a way to increase the yield of the desired products. Hence, in this work, we investigate the electrochemical oxidation of glycerol on a series of PtNi nanoparticles with increasing Ni content using a combination of physicochemical structural analysis, electrochemical measurements, operando spectroscopic techniques, and advanced product characterizations. With a moderate Ni content and a homogenously alloyed bimetallic Pt-Ni structure, the PtNi2 catalyst displayed the highest reaction activity among all materials studied in this work. In situ FTIR data show that PtNi2 can activate the glycerol molecule at a more negative potential (0.4 V RHE) than the other PtNi catalysts. In addition, its surface can effectively catalyze the complete C-C bond cleavage, resulting in lower CO poisoning and higher stability. Operando X-ray absorption spectroscopy and UV-vis spectroscopy suggest that glycerol adsorbs strongly onto surface Ni(OH) x sites, preventing their oxidation and activation of oxygen or hydroxyl from water. As such, we propose that the role of Ni in PtNi toward glycerol oxidation is to tailor the electronic structure of the pure Pt sites rather than a bifunctional mechanism. Our experiments provide guidance for the development of bimetallic catalysts toward highly efficient, selective, and stable glycerol oxidation reactions.

Multiobjective Optimization of a Frying Process Balancing Acrylamide Formation and Quality: Solution Analysis and Uncertainty Propagation.

In this study, we performed multi-objective model-based optimization of a potato-frying process balancing between acrylamide production and a quality parameter (yellowness). Solution analysis revealed that, for most of the Pareto solutions, acrylamide levels exceeded the EFSA recommendation. Almost equivalent optimal solutions were found for moderate processing conditions (low temperatures and/or processing times) and the propagation of the uncertainty of the acrylamide production model parameters led to Pareto fronts with notable differences from the one obtained using the nominal parameters, especially in the ranges of high values of acrylamide production and yellowness. These results can help to identify processing conditions to achieve the desired acrylamide/yellowness balance and design more robust processes allowing for the enhancement of flexibility when equivalent optimal solutions can be retrieved.

Different model hypotheses are needed to account for qualitative variability in the response of two strains of Salmonella spp. under dynamic conditions.

In this article, the thermal inactivation of two Salmonella strains (Salmonella Enteritidis CECT4300 and Salmonella Senftenberg CECT4565) was studied under both isothermal and dynamic conditions. We observed large differences between these two strains, with S. Senftenberg being much more resistant than S. Enteritidis. Under isothermal conditions, S. Senftenberg had non-linear survivor curves, whereas the response of S. Enteritidis was log-linear. Therefore, weibullian inactivation models were used to describe the response of S. Senftenberg, with the Mafart model being the more suitable one. For S. Enteritidis, the Bigelow (log-linear) inactivation model was successful at describing the isothermal response. Under dynamic conditions, a combination of the Peleg and Mafart models (secondary model of Mafart; t* of Peleg) fitted to the isothermal data could predict the response of S. Senftenberg to the dynamic treatments tested (heating rates between 0.5 and 10 °C/min). This was not the case for S. Enteritidis, where the model predictions based on isothermal data underestimated the microbial concentrations. Therefore, a dynamic model that considers stress acclimation to one of the dynamic profiles was fitted, using the remaining profiles as validation. In light of this, besides its quantitative impact, variability between strains of bacterial species can also cause qualitative differences in microbial inactivation. This is demonstrated by S. Enteritidis being able to develop stress acclimation where S. Senftenbenberg could not. This has important implications for the development of microbial inactivation models to support process design, as every industrial treatment is dynamic. Consequently, it is crucial to consider different model hypotheses, and how they affect the model predictions both under isothermal and dynamic conditions.

Glycerol Is Converted into Energy and Carbonyl Compounds in a 3D-Printed Microfluidic Fuel Cell: In Situ and In Operando Bi-Modified Pt Anodes.

The combination of energy and chemical conversion can be achieved by designing glycerol fuel cells. However, the anode must promote the reaction at onset potentials low enough to allow a spontaneous reaction, when coupled to the cathodic reaction, and must be selective. Here, we build a three-dimensional (3D)-printed glycerol microfluidic fuel cell that produces power concomitantly to glycolate and formate at zero bias. The balance between energy and the two carbonyl compounds is tuned by decorating the Pt/C/CP anode in situ (before feeding the cell reactants) or in operando (while feeding the cell with reactants) with Bi. The Bi-modified anodes improve glycerol conversion and output power while decreasing the formation of the carbonyl compounds. The in operando method builds dendrites of rodlike Bi oxides that are inactive for the anodic reaction and cover active sites. The in situ strategy promotes homogeneous Bi decoration, decreasing activation losses, increasing the open-circuit voltage to 1.0 V, and augmenting maximum power density 6.5 times and the glycerol conversion to 72% at 25 °C while producing 0.2 mmoL L-1 of glycolate and formate (each) at 100 µL min-1. Such a performance is attributed to the low CO poisoning of the anode, which leads the glycerol electrooxidation toward a more complete reaction, harvesting more electrons at the device. Printing the microfluidic fuel cell takes 23 min and costs ∼US$1.85 and can be used for other coupled reactions since the methods of modification presented here are applied to any existing and assembled systems.

Analysis of scenarios to reduce the probability of acquiring hemolytic uremic syndrome associated with beef consumption.

The objective of this study was to develop a quantitative microbial risk assessment (QMRA) model to evaluate potential risk mitigation strategies to reduce the probability of acquiring hemolytic uremic syndrome (HUS) associated with beef consumption in Argentina. Five scenarios were simulated to evaluate the effect of interventions on the probability of acquiring HUS from Shiga toxin-producing Escherichia coli (STEC)-contaminated ground beef and commercial hamburger consumption. These control strategies were chosen based on previous results of the sensitivity analysis of a baseline QMRA model. The application of improvement actions in abattoirs not applying Hazard Analysis and Critical Control Points (HACCP) for STEC would result 7.6 times lower in the probability that consumers acquired HUS from ground beef consumption, while the implementation of improvements in butcher shops would lead to a smaller reduction. In abattoirs applying HACCP for STEC, the risk of acquiring HUS from commercial hamburger consumption was significantly reduced. Treatment with 2% lactic acid, hot water and irradiation reduced 4.5, 3.5 and 93.1 times the risk of HUS, respectively. The most efficient interventions, in terms of case reduction, being those that are applied in the initial stages of the meat chain.

Dynamics of Microbial Inactivation and Acrylamide Production in High-Temperature Heat Treatments.

In food processes, optimizing processing parameters is crucial to ensure food safety, maximize food quality, and minimize the formation of potentially toxigenic compounds. This research focuses on the simultaneous impacts that severe heat treatments applied to food may have on the formation of harmful chemicals and on microbiological safety. The case studies analysed consider the appearance/synthesis of acrylamide after a sterilization heat treatment for two different foods: pureed potato and prune juice, using Geobacillus stearothermophilus as an indicator. It presents two contradictory situations: on the one hand, the application of a high-temperature treatment to a low acid food with G. stearothermophilus spores causes their inactivation, reaching food safety and stability from a microbiological point of view. On the other hand, high temperatures favour the appearance of acrylamide. In this way, the two objectives (microbiological safety and acrylamide production) are opposed. In this work, we analyse the effects of high-temperature thermal treatments (isothermal conditions between 120 and 135 °C) in food from two perspectives: microbiological safety/stability and acrylamide production. After analysing both objectives simultaneously, it is concluded that, contrary to what is expected, heat treatments at higher temperatures result in lower acrylamide production for the same level of microbial inactivation. This is due to the different dynamics and sensitivities of the processes at high temperatures. These results, as well as the presented methodology, can be a basis of analysis for decision makers to design heat treatments that ensure food safety while minimizing the amount of acrylamide (or other harmful substances) produced.

High Hydrostatic Pressure vs. Thermal Pasteurization: The Effect on the Bioactive Compound Profile of a Citrus Maqui Beverage.

The effects of high hydrostatic pressure (HHP) compared to thermal pasteurization (TP) were studied in healthy citrus-maqui beverages. The impact of the processing technologies on the microbiological and phytochemical profile was assessed by applying two HHP treatments at 450 and 600 MPa for 180 s and TP at 85 °C for 15 s. The shelf life under refrigeration (4 °C) and room temperature (20 °C) was monitored for 90 days. All treatments ensured microbiological stability at both storage temperatures. Aside from that, the physicochemical parameters were not significantly different after processing or throughout the storage period. Regarding color parameters, an increase in the reddish coloration was observed during storage for those beverages treated by HHP. In general, phenolic compounds were little affected by the processing technique, even when treatment under HHP was more stable than by TP during storage. On the other hand, vitamin C showed great degradation after processing under any condition. It can be concluded that HHP is an effective alternative to thermal treatments, achieving effective microbial inactivation and extending the shelf life of the juices by contributing to a better preservation of color and bioactive compounds.

Impact of Heating Rates on Alicyclobacillus acidoterrestris Heat Resistance under Non-Isothermal Treatments and Use of Mathematical Modelling to Optimize Orange Juice Processing.

Alicyclobacillus acidoterrestris is a spoilage microorganism responsible for relevant product and economic losses in the beverage and juice industry. Spores of this microorganism can survive industrial heat treatments and cause spoilage during posterior storage. Therefore, an effective design of processing treatments requires an accurate understanding of the heat resistance of this microorganism. Considering that industrial treatments are dynamic; this understanding must include how the heat resistance of the microorganism is affected by the heating rate during the heating and cooling phases. The main objective of this study was to establish the effect of heating rates and complex thermal treatments on the inactivation kinetics of A. acidoterrestris. Isothermal experiments between 90 and 105 °C were carried out in a Mastia thermoresistometer, as well as four different dynamic treatments. Although most of the inactivation takes place during the holding phase, our results indicate the relevance of the heating phase for the effectiveness of the treatment. The thermal resistance of A. acidoterrestris is affected by the heating rate during the heating phase. Specifically, higher heating rates resulted in an increased microbial inactivation with respect to the one predicted based on isothermal experiments. These results provide novel information regarding the heat response of this microorganism, which can be valuable for the design of effective heat treatments to improve product safety and stability. Moreover, it highlights the need to incorporate experimental data based on dynamic treatments in process design, as heating rates can have a very significant effect on the thermal resistance of microorganisms.

Bragg Coherent Diffraction Imaging for In Situ Studies in Electrocatalysis.

Electrocatalysis is at the heart of a broad range of physicochemical applications that play an important role in the present and future of a sustainable economy. Among the myriad of different electrocatalysts used in this field, nanomaterials are of ubiquitous importance. An increased surface area/volume ratio compared to bulk makes nanoscale catalysts the preferred choice to perform electrocatalytic reactions. Bragg coherent diffraction imaging (BCDI) was introduced in 2006 and since has been applied to obtain 3D images of crystalline nanomaterials. BCDI provides information about the displacement field, which is directly related to strain. Lattice strain in the catalysts impacts their electronic configuration and, consequently, their binding energy with reaction intermediates. Even though there have been significant improvements since its birth, the fact that the experiments can only be performed at synchrotron facilities and its relatively low resolution to date (∼10 nm spatial resolution) have prevented the popularization of this technique. Herein, we will briefly describe the fundamentals of the technique, including the electrocatalysis relevant information that we can extract from it. Subsequently, we review some of the computational experiments that complement the BCDI data for enhanced information extraction and improved understanding of the underlying nanoscale electrocatalytic processes. We next highlight success stories of BCDI applied to different electrochemical systems and in heterogeneous catalysis to show how the technique can contribute to future studies in electrocatalysis. Finally, we outline current challenges in spatiotemporal resolution limits of BCDI and provide our perspectives on recent developments in synchrotron facilities as well as the role of machine learning and artificial intelligence in addressing them.

Native Species Facing Climate Changes: Response of Calafate Berries to Low Temperature and UV Radiation.

Calafate (Berberis microphylla G. Forst) is a wild bush plant widely distributed in the south of Argentina and Chile. Their blue colored fruits present particular flavor and health benefits attributed to high polyphenol contents biosynthesized by the plant under stress. Studies about correlation of abiotic conditions with anthocyanin profiles and physicochemical features of calafate beneath wild origin environment are not described yet. Hence, this research aimed to evaluate the physicochemical changes, antioxidant activity and anthocyanin content of calafate fruit in relationship to UV solar radiation (W.m-2) and air temperature (°C) environment condition during three consecutive years (2017, 2018, 2019). Variations in fruit anthocyanins were determined by comparison between high performance liquid chromatography (HPLC-DAD-ESI)/MSn and CIEL*a*b* colors parameters. Correlations were analyzed by principal component analysis (PCA). Radiation was negatively correlated with fruit size and weight. Physicochemical aspects such as pH, soluble solids, color, total anthocyanins, flavanols and other phenolic compounds were positively correlated with temperature changes. The quantities of monomeric anthocyanins were dependent on both low temperature and global radiation (reaching 20.01 mg g-1 FW in calafate fruit). These results constitute a valuable resource to understand the structural and physiological plasticity of calafate in facing climate changes for future domestication research as well as for agri-food industrial application.

Microbiological and process variability using biological indicators of inactivation (BIIs) based on Bacillus cereus spores of food and fish-based animal by-products to evaluate microwave heating in a pilot plant.

Microwave processing can be a valid alternative to conventional heating for different types of products. It enables a more efficient heat transfer in the food matrix, resulting in higher quality products. However, for many food products a uniform temperature distribution is not possible because of heterogeneities in their physical properties and non-uniformtiy in the electric field pattern. Hence, the effectiveness of microwave inactivation treatments is influenced by both intrinsic (differences between cells) and extrinsic variability (non-uniform temperature). Interpreting the results of the process and considering its impact on microbial inactivation is essential to ensure effective and efficient processing. In this work, we quantified the variability in microbial inactivation attained in a microwave pasteurization treatment with a tunnel configuration at pilot-plant scale. The configuration of the equipment makes it impossible to measure the product temperature during treatment. For that reason, variability in microbial counts was measured using Biological Inactivation Indicators (BIIs) based on spherical particles of alginate inoculated with spores of Bacillus spp. The stability of the BIIs and the uncertainty associated to them was assessed using preliminary experiments in a thermoresistometer. Then, they were introduced in the food product to analyse the microbial inactivation in different points of the products during the microwave treatment. Experiments were made in a vegetable soup and a fish-based animal by-product (F-BP). The results show that the variation in the microbial counts was higher than expected based on the biological variability estimated in the thermoresistometer and the uncertainty of the BIIs. This is due to heterogeneities in the temperature field (measured using a thermographic camera), which were higher in the F-BP than in the vegetable soup. Therefore, for the process studied, extrinsic variability was more relevant than intrinsic variability. The methodology presented in this work can be a valid method to evaluate pasteurization treatments of foods processed by heating, providing valuable information of the microbial inactivation achieved. It can contribute to design microwave processes for different types of products and for product optimization.

Quantitative risk assessment of haemolytic uremic syndrome associated with beef consumption in Argentina.

We developed a quantitative microbiological risk assessment (QMRA) of haemolytic uremic syndrome (HUS) associated with Shiga toxin-producing Escherichia coli (STEC)-contaminated beef (intact beef cuts, ground beef and commercial hamburgers) in children under 15 years of age from Argentina. The QMRA was used to characterize STEC prevalence and concentration levels in each product through the Argentinean beef supply chain, including cattle primary production, cattle transport, processing and storage in the abattoir, retail and home preparation, and consumption. Median HUS probability from beef cut, ground beef and commercial hamburger consumption was <10-15, 5.4x10-8 and 3.5x10-8, respectively. The expected average annual number of HUS cases was 0, 28 and 4, respectively. Risk of infection and HUS probability were sensitive to the type of abattoir, the application or not of Hazard Analysis and Critical Control Points (HACCP) for STEC (HACCP-STEC), stx prevalence in carcasses and trimmings, storage conditions from the abattoir to retailers and home, the joint consumption of salads and beef products, and cooking preference. The QMRA results showed that the probability of HUS was higher if beef cuts (1.7x) and ground beef (1.2x) were from carcasses provided by abattoirs not applying HACCP-STEC. Thus, the use of a single sanitary standard that included the application of HACCP-STEC in all Argentinean abattoirs would greatly reduce HUS incidence. The average number of annual HUS cases estimated by the QMRA (n = 32) would explain about 10.0% of cases in children under 15 years per year in Argentina. Since other routes of contamination can be involved, including those not related to food, further research on the beef production chain, other food chains, person-to-person transmission and outbreak studies should be conducted to reduce the impact of HUS on the child population of Argentina.