Microstructured Polymer System Containing Proanthocyanidin-Enriched Extract from Limonium brasiliense as a Prophylaxis Strategy to Prevent Recurrence of Porphyromonas gingivalis.

Periodontal diseases are a global oral health problem affecting almost 10% of the global population. Porphyromonas gingivalis is one of the main bacteria involved in the initiation and progression of inflammatory processes as a result of the action of the cysteine proteases lysin- and arginine-gingipain. Surelease/polycarbophil microparticles containing a lyophilized proanthocyanidin-enriched fraction from the rhizomes of Limonium brasiliense, traditionally named "baicuru" (ethyl acetate fraction), were manufactured. The ethyl acetate fraction was characterized by UHPLC by the presence of samarangenins A and B (12.10 ± 0.07 and 21.05 ± 0.44%, respectively) and epigallocatechin-3-O-gallate (13.44 ± 0.27%). Physiochemical aspects of Surelease/polycarbophil microparticles were characterized concerning particle size, zeta potential, entrapment efficiency, ethyl acetate fraction release, and mucoadhesion. Additionally, the presence of the ethyl acetate fraction-loaded microparticles was performed concerning potential influence on viability of human buccal KB cells, P. gingivalis adhesion to KB cells, gingipain activity, and P. gingivalis biofilm formation. In general, all Surelease/polycarbophil microparticles tested showed strong adhesion to porcine cheek mucosa (93.1 ± 4.2% in a 30-min test), associated with a prolonged release of the ethyl acetate fraction (up to 16.5 ± 0.8% in 24 h). Preincubation of KB cells with Surelease/polycarbophil microparticles (25 µg/mL) resulted in an up to 93 ± 2% reduced infection rate by P. gingivalis. Decreased activity of the P. gingivalis-specific virulence factors lysin- and arginine-gingipain proteases by Surelease/polycarbophil microparticles was confirmed. Surelease/polycarbophil microparticles decreased biofilm formation of P. gingivalis (97 ± 2% at 60 µg/mL). Results from this study prove the promising activity of Surelease/polycarbophil microparticles containing ethyl acetate fraction microparticles as a prophylaxis strategy to prevent the recurrence of P. gingivalis.

Mucoadhesive emulgel systems containing curcumin for oral squamous cell carcinoma treatment: From pre-formulation to cytotoxicity in tissue-engineering oral mucosa.

Current oral squamous cell carcinoma chemotherapies demonstrate off-target toxicity, which could be reduced by local delivery. Curcumin acts via many cellular targets to give anti-cancer properties; however the bioavailability is hindered by its physicochemical characteristics. The incorporation of curcumin into emulgel systems could be a promising approach for its solubilization and delivery. The aim of this work was to develop emulgel systems containing curcumin for the treatment of oral cancer. The emulgels containing curcumin were prepared with poloxamer 407, acrylic acid derivatives, oil phase (sesame oil or isopropyl myristate). The more stable system was evaluated for mechanical and rheological properties, as well as, the in vitro drug release profile, permeation and cytotoxic potential to oral mucosa models. The flow-throw system evidenced that the formulations could keep 5 min over porcine oral mucosa. Emulgel showed pseudoplastic behavior and a gelation temperature of 33 °C, which ensure their higher consistency. In addition, 70% of the incorporated curcumin was released within 24 h in an in vitro drug release study and could permeate porcine oral mucosa. Monolayers cultures and tissue-engineered models showed the selectivity of the drug and systems for tumor cells. The physicochemical properties, subsequent release and permeation of curcumin to selectivity kill cancer cells could be improved by the incorporation into emulgel systems.

Design of a nanostructured mucoadhesive system containing curcumin for buccal application: from physicochemical to biological aspects.

Mucoadhesive nanostructured systems comprising poloxamer 407 and Carbopol 974P® have already demonstrated good mucoadhesion, as well as improved mechanical and rheological properties. Curcumin displays excellent biological activity, mainly in oral squamous cancer; however, its physicochemical characteristics hinder its application. Therefore, the aim of this study was to develop nanostructured formulations containing curcumin for oral cancer therapy. The photophysical interactions between curcumin and the formulations were elucidated by incorporation kinetics and location studies. They revealed that the drug was quickly incorporated and located in the hydrophobic portion of nanometer-sized polymeric micelles. Moreover, the systems displayed plastic behavior with rheopexy characteristics at 37 °C, viscoelastic properties and a gelation temperature of 36 °C, which ensures increased retention after application in the oral cavity. The mucoadhesion results confirmed the previous findings with the nanostructured systems showing a residence time of 20 min in porcine oral mucosa under flow system conditions. Curcumin was released after 8 h and could permeate through the porcine oral mucosa. Cytotoxicity testing revealed that the formulations were selective to cancer cells over healthy cells. Therefore, these systems could improve the physicochemical characteristics of curcumin by providing improved release and permeation, while selectivity targeting cancer cells.

Assessing Mucoadhesion in Polymer Gels: The Effect of Method Type and Instrument Variables.

The process of mucoadhesion has been widely studied using a wide variety of methods, which are influenced by instrumental variables and experiment design, making the comparison between the results of different studies difficult. The aim of this work was to standardize the conditions of the detachment test and the rheological methods of mucoadhesion assessment for semisolids, and introduce a texture profile analysis (TPA) method. A factorial design was developed to suggest standard conditions for performing the detachment force method. To evaluate the method, binary polymeric systems were prepared containing poloxamer 407 and Carbopol 971P®, Carbopol 974P®, or Noveon® Polycarbophil. The mucoadhesion of systems was evaluated, and the reproducibility of these measurements investigated. This detachment force method was demonstrated to be reproduceable, and gave different adhesion when mucin disk or ex vivo oral mucosa was used. The factorial design demonstrated that all evaluated parameters had an effect on measurements of mucoadhesive force, but the same was not observed for the work of adhesion. It was suggested that the work of adhesion is a more appropriate metric for evaluating mucoadhesion. Oscillatory rheology was more capable of investigating adhesive interactions than flow rheology. TPA method was demonstrated to be reproducible and can evaluate the adhesiveness interaction parameter. This investigation demonstrates the need for standardized methods to evaluate mucoadhesion and makes suggestions for a standard study design.

A critical review about methodologies for the analysis of mucoadhesive properties of drug delivery systems.

Mucoadhesion is a useful strategy for drug delivery systems, such as tablets, patches, gels, liposomes, micro/nanoparticles, nanosuspensions, microemulsions and colloidal dispersions. Moreover, it has contributed to many benefits like increased residence time at application sites, drug protection, increased drug permeation and improved drug availability. In this context, investigation into the mucoadhesive properties of pharmaceutical dosage forms is fundamental, in order to characterize, understand and simulate the in vivo interaction between the formulation and the biological substrate, contributing to the development of new mucoadhesive systems with effectiveness, safety and quality. There are a lot of in vivo, in vitro and ex vivo methods for the evaluation of the mucoadhesive properties of drug delivery systems. However, there also is a lack of standardization of these techniques, which makes comparison between the results difficult. Therefore, this work aims to show an overview of the most commonly employed methods for mucoadhesion evaluation, relating them to different proposed systems and using artificial or natural mucosa from humans and animals.

Description of recovery method used for curdlan produced by Agrobacterium sp. IFO 13140 and its relation to the morphology and physicochemical and technological properties of the polysaccharide.

Curdlan is a linear polysaccharide considered a dietary fiber and with gelation properties. This study evaluated the structure, morphology and the physicochemical and technological properties of curdlan produced by Agrobacterium sp. IFO 13140 recovered by pre-gelation and precipitation methods. Commercial curdlan submitted or otherwise to the pre-gelation process was also evaluated. The data obtained from structural analysis revealed a similarity between the curdlan produced by Agrobacterium sp. IFO 13140 (recovered by both methods) and the commercial curdlans. The results showed that the curdlans evaluated differed significantly in terms of dispersibility and gelation, and only the pre-gelled ones had significant potential for food application, because this method influence on the size of the particles and in the presence of NaCl. In terms of technological properties, the curdlan produced by Agrobacterium sp. IFO 13140 (pre-gelation method) had a greater water and oil holding capacity (64% and 98% greater, respectively) and a greater thickening capacity than the pre-gelled commercial curdlan. The pre-gelled commercial curdlan displayed a greater gelling capacity at 95°C than the others. When applied to food, only the pre-gelled curdlans improved the texture parameters of yogurts and reduced syneresis. The curdlan gels, which are rigid and stable in structure, demonstrated potential for improving the texture of food products, with potential industrial use.

Evaluation of the methylene blue addition in binary polymeric systems composed by poloxamer 407 and Carbopol 934P using quality by design: rheological, textural, and mucoadhesive analysis.

This study describes the investigation about the physicochemical behavior of methylene blue (Mb) addition to systems containing poloxamer 407 (Polox), Carbopol 934P (Carb), intended to be locally used by photodynamic therapy. A factorial design 23 (plus center point) was used to analyze the rheological, mucoadhesive and textural properties of the preparations. Systems containing the lower concentrations of Polox (15 and 17.5%, w/w) exhibited pseudoplastic flow and low degrees of rheopexy. On the other hand, at higher Polox concentration (20%, w/w) the systems display plastic flow and thixotropy. Carb and Mb exhibited a negative influence for the consistency and flow behavior index, due to the interaction between them. For most of the formulations, the increase of Polox and Mb content significantly increased storage modulus, loss modulus and dynamic viscosity. The systems display a sol-gel transition temperature, existing as a liquid at room temperature and gel at 29-37 °C. Increasing the temperature and the polymer concentration, the compressional properties of systems significantly increased. The mucoadhesion was noted to all formulations, except to systems composed by 15% (w/w) of Polox. The analyses enabled to understand and predict the performance of formulations and the polymer-Mb interactions, tailoring to the suit systems (Polox/Carb/Mb): 17.5/0.50/0.20 and 20/0.15/0.25.

Preservation of Bacillus firmus strain 37 and optimization of cyclodextrin biosynthesis by cells immobilized on loofa sponge.

The preservation of Bacillus firmus strain 37 cells by lyophilization was evaluated and response surface methodology (RSM) was used to optimize the ß-cyclodextrin (ß-CD) production by cells immobilized on loofa sponge. Interactions were studied with the variables temperature, pH and dextrin concentration using a central composite design (CCD). Immobilization time influence on ß-CD production was also investigated. B. firmus strain 37 cells remained viable after one year of storage, showing that the lyophilization is a suitable method for preservation of the microorganism. From the three-dimensional diagrams and contour plots, the best conditions for ß-CD production were determined: temperature 60 °C, pH 8, and 18% dextrin. Considering that the amount of dextrin was high, a new assay was carried out, in which dextrin concentrations of 10, 15, and 18% were tested and the temperature of 60 °C and pH 8 were maintained. The results achieved showed very small differences and therefore, for economic reasons, the use of 10% dextrin is suggested. Increasing the immobilization time of cells immobilized on synthetic sponge the ß-CD production decreased and did not change for cells immobilized on loofa sponge. The results of this research are important for microorganism preservation and essential in the optimization of the biosynthesis of CD.