Nickel ferrite decorated noble metal containing nitrogen-doped carbon nanotubes as potential magnetic separable catalyst for dinitrotoluene hydrogenation.

The 2,4-toluenediamine (TDA) is one of the most important chemicals in the polyurethane industry, produced by the catalytic hydrogenation of 2,4-dinitrotoluene (DNT). The development of novel catalysts that can be easily recovered from the reaction mixture is of paramount importance. In our work, a NiFe2O4/N-BCNT supported magnetic catalyst was prepared by a modified coprecipitation method. The catalyst support alone also showed activity in the synthesis of TDA. Platinum nanoparticles were deposited on the catalyst support surface by a fast, relatively simple, and efficient sonochemical method, resulting in a readily applicable catalytically active system. The prepared catalyst exhibited high activity in hydrogenation tests, which was proved by the exceptionally high DNT conversion (100% for 120 min at 333 K) and TDA yield (99%). Furthermore, the magnetic catalyst can be easily recovered from the reaction medium by the action of an external magnetic field, which can greatly reduce catalyst loss during separation.

Cyclodextrin encapsulation enabling the anticancer repositioning of disulfiram: Preparation, analytical and in vitro biological characterization of the inclusion complexes.

Drug repositioning is a high-priority and feasible strategy in the field of oncology research, where the unmet medical needs are continuously unbalanced. Disulfiram is a potential non-chemotherapeutic, adjuvant anticancer agent. However, the clinical translation is limited by the drug's poor bioavailability. Therefore, the molecular encapsulation of disulfiram with cyclodextrins is evaluated to enhance the solubility and stability of the drug. The present work describes for the first time the complexation of disulfiram with randomly methylated-ß-cyclodextrin. A parallel analytical andin vitrobiological comparison of disulfiram inclusion complexes with hydroxypropyl-ß-cyclodextrin, randomly methylated-ß-cyclodextrin and sulfobutylether-ß-cyclodextrin is conducted. A significant drug solubility enhancement by about 1000-folds and fast dissolution in 1 min is demonstrated. Thein vitrodissolution-permeation studies and proliferation assays demonstrate the solubility-dependent efficacy of the drug. Throughout the different cancer cell lines' characteristics and disulfiram unspecific antitumoral activity, the inhibitory efficacy of the cyclodextrin encapsulated drug on melanoma (IC50 about 100 nM) and on glioblastoma (IC50 about 7000 nM) cell lines differ by a magnitude. This pre-formulation screening experiment serves as a proof of concept of using cyclodextrin encapsulation as a platform tool for further drug delivery development in repositioning areas.

Urethane Synthesis in the Presence of Organic Acid Catalysts-A Computational Study.

A general mechanism for catalytic urethane formation in the presence of acid catalysts, dimethyl hydrogen phosphate (DMHP), methanesulfonic acid (MSA), and trifluoromethanesulfonic acid (TFMSA), has been studied using theoretical methods. The reaction of phenyl isocyanate (PhNCO) and butan-1-ol (BuOH) has been selected to describe the energetic and structural features of the catalyst-free urethane formation. The catalytic activities of DMHP, MSA, and TFMSA have been compared by adding them to the PhNCO-BuOH model system. The thermodynamic properties of the reactions were computed by using the G3MP2BHandHLYP composite method. It was revealed that in the presence of trifluoromethanesulfonic acid, the activation energy was the lowest within the studied set of catalysts. The achieved results indicate that acids can be successfully employed in urethane synthesis and the mechanism was described.

Simultaneous Determination of Enantiomeric Purity and Organic Impurities of Dexketoprofen Using Reversed-Phase Liquid Chromatography-Enhancing Enantioselectivity through Hysteretic Behavior and Temperature-Dependent Enantiomer Elution Order Reversal on Polysaccharide Chiral Stationary Phases.

A reversed-phase high-performance liquid chromatographic (HPLC) method was developed for the simultaneous determination of the potential impurities of dexketoprofen, including the distomer R-ketoprofen. After screening the separation capability of four polysaccharide columns (Lux Amylose-1, Lux Amylose-2, Lux Cellulose-1 and Lux Cellulose-2) in polar organic and in reversed-phase modes, appropriate enantioseparation was observed only on the Lux Amylose-2 column in an acidified acetonitrile/water mixture. A detailed investigation of the mobile phase composition and temperature for enantio- and chemoselectivity showed many unexpected observations. It was observed that both the resolution and the enantiomer elution order can be fine-tuned by varying the temperature and mobile phase composition. Moreover, hysteresis of the retention times and enantioselectivity was also observed in reversed-phase mode using methanol/water mixtures on amylose-type columns. This could indicate that the three-dimensional structure of the amylose column can change by transitioning from a polar organic to a reversed-phase mode, which affects the enantioseparation process. Temperature-dependent enantiomer elution order and rare enthalpic/entropic controlled enantioseparation in the operative temperature range were also observed in reversed-phase mode. To find the best methodological conditions for the determination of dexketoprofen impurities, a full factorial optimization design was performed. Using the optimized parameters (Lux Amylose-2 column with water/acetonitrile/acetic acid 50/50/0.1 (v/v/v) at a 1 mL/min flow rate at 20 °C), baseline separations were achieved between all compounds within 15 min. Our newly developed HPLC method was validated according to the current guidelines, and its application was tested on commercially available pharmaceutical formulations. According to the authors' knowledge, this is the first study to report hysteretic behavior on polysaccharide columns in reversed-phase mode.

Stoichiometric reaction and catalytic effect of 2-dimethylaminoethanol in urethane formation.

A computational study of the stoichiometric reaction and catalytic effect of 2-dimethylaminoethanol (DMEA) in urethane formation was performed. DMEA, besides its catalytic tertiary amine site, contains a hydroxyl group that can react with isocyanates and thus, it can affect the synthesis of polyurethane. In the catalytic system, the reaction between phenyl isocyanate and butan-1-ol, involving DMEA as a catalyst, was investigated. Meanwhile, for the competitive stoichiometric process, the reaction between phenyl isocyanate and DMEA was also considered. Both reactions were investigated by using the G3MP2BHandHLYP composite method and acetonitrile was chosen as the solvent. It was revealed that both pathways (catalytic and stoichiometric processes) are similar thermodynamically, but the catalytic reaction is preferred kinetically, which indicates the applicability of DMEA in urethane synthesis.

Bentonite as eco-friendly natural mineral support for Pd/CoFe2O4 catalyst applied in toluene diamine synthesis.

Toluene diamine (TDA) is a major raw material in the polyurethane industry and thus, its production is highly important. TDA is obtained through the catalytic hydrogenation of 2,4-dinitrotoluene (2,4-DNT). In this study a special hydrogenation catalyst has been developed by decomposition cobalt ferrite nanoparticles onto a natural clay-oxide nanocomposite (bentonite) surface using a microwave-assisted solvothermal method. The catalyst particles were examined by TEM and X-ray diffraction. The palladium immobilized on the bentonite crystal surface was identified using an XRD and HRTEM device. The obtained catalyst possesses the advantageous property of being easily separable due to its magnetizability on a natural mineral support largely available and obtained through low carbon- and energy footprint methods. The catalyst demonstrated outstanding performance with a 2,4-DNT conversion rate exceeding 99% along with high yields and selectivity towards 2,4-TDA and all of this achieved within a short reaction time. Furthermore, the developed catalyst exhibited excellent stability, attributed to the strong interaction between the catalytically active metal and its support. Even after four cycles of reuse, the catalytic activity remained unaffected and the Pd content of the catalyst did not change, which indicates that the palladium component remained firmly attached to the magnetic support's surface.

Development of Magnetizable, Nickel-Ferrite-Decorated Carbon Nanocomposites as Hydrogenation Catalyst for Aniline Synthesis.

Catalysts with magnetic properties can be easily recovered from the reaction medium without loss by using a magnetic field, which highly improves their applicability. To design such systems, we have successfully combined the magnetic properties of nickel ferrite nanoparticles with the positive properties of carbon-based catalyst supports. Amine-functionalized NiFe2O4 nanoparticles were deposited on the surfaces of nitrogen-doped bamboo-like carbon nanotubes (N-BCNT) and carbon nanolayers (CNL) by using a coprecipitation process. The magnetizable catalyst supports were decorated by Pd nanoparticles, and their catalytic activity was tested through the hydrogenation of nitrobenzene (NB). By using the prepared catalysts, high nitrobenzene conversion (100% for 120 min at 333 K) and a high aniline yield (99%) were achieved. The Pd/NiFe2O4-CNL catalyst was remarkable in terms of stability during the reuse tests due to the strong interaction formed between the catalytically active metal and its support (the activity was retained during four cycles of 120 min at 333 K). Furthermore, despite the long-lasting mechanical stress, no significant palladium loss (only 0.08 wt%) was detected.

Effect of morpholine, and 4-methylmorpholine on urethane formation: a computational study.

A theoretical study of urethane formation through the reaction of phenyl isocyanate and butan-1-ol was carried out, without and in the presence of morpholine, and 4-methylmorpholine catalysts. The reaction with and without catalysts was studied at BHandHLYP/6-31G(d) and G3MP2BHandHLYP levels of theories. The reaction mechanism in the presence of catalysts differs significantly from the catalyst-free case and includes seven steps. The catalyst-free system was investigated along with the catalytic process, the geometries were optimized, and the corresponding thermodynamic properties were calculated. Calculated reactant complexes were compared with crystal structures of morpholine, and 4-methylmorpholine complexed with diols found in the literature. The structures were strikingly similar and thus, the validity of the proposed and studied general organocatalytic reaction mechanism was partially verified. Meanwhile, an irregularity in the energy profile occurred due to the zwitterionic nature of an intermediate. To handle the irregularity, a correction was implemented which handles the appearance of a zwitterionic structure and the corresponding energetic properties. The results showed that morpholine is less effective catalyst compared to 4-methylmorpholine, which can be associated with the difference in their PA (1523.95 and 963.07 kJ/mol, respectively). The current results prove the important role of amine catalysts in urethane synthesis which can be applied in polyurethane catalyst design and development.

Enantioseparation and molecular docking study of selected chiral pharmaceuticals on a commercialized phenylcarbamate-ß-cyclodextrin column using polar organic mode.

The chiral separation capability of Chiral-CD-Ph column, containing phenylcarbamate-ß-cyclodextrin as the chiral selector in polar organic mode was investigated. A total of twenty-five compounds with different structures and acid-base properties were evaluated, and twenty of them were separated using acetonitrile or methanol as eluent. The effects of various chromatographic parameters, such as the type and proportion of organic modifier, flow rate, and column temperature were analyzed in detail in relation to chromatographic performance. A U-shape retention curve was observed when a mixture of acetonitrile and methanol was used as the eluent, indicating different types of interactions in different solvent mixtures. Van 't Hoff analysis was used for calculation of thermodynamic parameters which revealed that the enantioseparation is mainly enthalpy controlled; however, entropic control was also observed. The enantiomer recognition ability at the atomic level was also investigated through a molecular docking study, which revealed surface binding in polar organic mode instead of inclusion complexation. Our work proves that the phenylcarbamate-ß-cyclodextrin-based chiral stationary phase can be effectively used in polar organic mode for the chiral separation of structurally diverse compounds. Furthermore, it is important to note that our study demonstrated that surface binding is responsible for the formation of supramolecular complexes in certain cyclodextrin derivatives.

Towards Machine Learning in Heterogeneous Catalysis-A Case Study of 2,4-Dinitrotoluene Hydrogenation.

Utilization of multivariate data analysis in catalysis research has extraordinary importance. The aim of the MIRA21 (MIskolc RAnking 21) model is to characterize heterogeneous catalysts with bias-free quantifiable data from 15 different variables to standardize catalyst characterization and provide an easy tool to compare, rank, and classify catalysts. The present work introduces and mathematically validates the MIRA21 model by identifying fundamentals affecting catalyst comparison and provides support for catalyst design. Literature data of 2,4-dinitrotoluene hydrogenation catalysts for toluene diamine synthesis were analyzed by using the descriptor system of MIRA21. In this study, exploratory data analysis (EDA) has been used to understand the relationships between individual variables such as catalyst performance, reaction conditions, catalyst compositions, and sustainable parameters. The results will be applicable in catalyst design, and using machine learning tools will also be possible.

Chiral Separation of Oxazolidinone Analogs by Capillary Electrophoresis Using Anionic Cyclodextrins as Chiral Selectors: Emphasis on Enantiomer Migration Order.

Comparative chiral separations of enantiomeric pairs of four oxazolidinone and two related thio-derivatives were performed by capillary electrophoresis, using cyclodextrins (CDs) as chiral selectors. Since the selected analytes are neutral, the enantiodiscrimination capabilities of nine anionic CD derivatives were determined, in 50 mM phosphate buffer pH = 6. Unanimously, the most successful chiral selector was the single isomeric heptakis-(6-sulfo)-ß-cyclodextrin (HS-ß-CD), which resulted in the highest enantioresolution values out of the CDs applied for five of the six enantiomeric pairs. The enantiomer migration order (EMO) was the same for two enantiomeric pairs, irrespective of the CD applied. However, several examples of EMO reversals were obtained in the other cases. Interestingly, changing from randomly substituted, multi-component mixtures of sulfated-ß-CD to the single isomeric chiral selector, enantiomer migration order reversal occurred for two enantiomeric pairs and similar observations were made when comparing heptakis-(2,3-di-O-methyl-6-O-sulfo)-ß-CD, (HDMS-ß-CD) with HS-ß-CD. In several cases, cavity-size-dependent, and substituent-dependent EMO reversals were also observed. Minute differences in the structure of the analytes were also responsible for several cases of EMO reversal. The present study offers a complex overview of the chiral separation of structurally related oxazolidinones, and thio-analogs, highlighting the importance of the adequate choice of chiral selector in this group of compounds, where enantiomeric purity is of utmost importance.

Comparative study of the antioxidant capability of EDTA and Irganox.

Oxidative stress makes it difficult to preserve food and negatively affect the applicability of polymeric packaging. It is typically caused by an excess of free radicals, and it is dangerous to human health, resulting in the onset and development of diseases. The antioxidant ability and activity of ethylenediaminetetraacetic acid (EDTA) and Irganox (Irg) as synthetic antioxidant additives were studied. Three different antioxidant mechanisms were considered and compared by calculating bond dissociation enthalpy (BDE), ionization potential (IP), proton dissociation enthalpy (PDE), proton affinity (PA), and electron transfer enthalpy (ETE) values. Two density functional theory (DFT) methods were used, M05-2X and M06-2X with the 6-311++G(2d,2p) basis set in gas phase. Both additives can be used to protect pre-processed food products and polymeric packaging from oxidative stress related material deterioration. By comparing the two studied compounds, it was found that EDTA has a higher antioxidant potential than Irganox. To the best of our knowledge several studies have been carried out to understand the antioxidant potential of various natural and synthetic species, but EDTA and Irganox were not compared and investigated before. These additives can be used to protect pre-processed food products and polymeric packaging and prevent material deterioration caused by oxidative stress.

Enantioselective Human Serum Albumin Binding of Apremilast: Liquid Chromatographic, Fluorescence and Molecular Docking Study.

The interaction between human serum albumin (HSA) and apremilast (APR), a novel antipsoriatic drug, was characterized by multimodal analytical techniques including high-performance liquid chromatography (HPLC), fluorescence spectroscopy and molecular docking for the first time. Using an HSA chiral stationary phase, the APR enantiomers were well separated, indicating enantioselective binding between the protein and the analytes. The influence of chromatographic parameters-type and concentration of the organic modifier, buffer type, pH, ionic strength of the mobile phase, flow rate and column temperature-on the chromatographic responses (retention factor and selectivity) was analyzed in detail. The results revealed that the eutomer S-APR bound to the protein to a greater extent than the antipode. The classical van 't Hoff method was applied for thermodynamic analysis, which indicated that the enantioseparation was enthalpy-controlled. The stability constants of the protein-enantiomer complexes, determined by fluorescence spectroscopy, were in accordance with the elution order observed in HPLC (KR-APR-HSA = 6.45 × 103 M-1, KS-APR-HSA = 1.04 × 104 M-1), showing that, indeed, the later-eluting S-APR displayed a stronger binding with HSA. Molecular docking was applied to study and analyze the interactions between HSA and the APR enantiomers at the atomic level. It was revealed that the most favored APR binding occurred at the border between domains I and II of HSA, and secondary interactions were responsible for the different binding strengths of the enantiomers.

Palladium Decorated, Amine Functionalized Ni-, Cd- and Co-Ferrite Nanospheres as Novel and Effective Catalysts for 2,4-Dinitrotoluene Hydrogenation.

2,4-diaminotoluene (TDA) is one of the most important polyurethane precursors produced in large quantities by the hydrogenation of 2,4-dinitrotoluene using catalysts. Any improvement during the catalysis reaction is therefore of significant importance. Separation of the catalysts by filtration is cumbersome and causes catalyst loss. To solve this problem, we have developed magnetizable, amine functionalized ferrite supported palladium catalysts. Cobalt ferrite (CoFe2O4-NH2), nickel ferrite (NiFe2O4-NH2), and cadmium ferrite (CdFe2O4-NH2) magnetic catalyst supports were produced by a simple coprecipitation/sonochemical method. The nanospheres formed contain only magnetic (spinel) phases and show catalytic activity even without noble metals (palladium, platinum, rhodium, etc.) during the hydrogenation of 2,4-dinitrotoluene, 63% (n/n) conversion is also possible. By decorating the supports with palladium, almost 100% TDA selectivity and yield were ensured by using Pd/CoFe2O4-NH2 and Pd/NiFe2O4-NH2 catalysts. These catalysts possess highly favorable properties for industrial applications, such as easy separation from the reaction medium without loss by means of a magnetic field, enhanced reusability, and good dispersibility in aqueous medium. Contrary to non-functionalized supports, no significant leaching of precious metals could be detected even after four cycles.

An Ab Initio Investigation on Relevant Oligomerization Reactions of Toluene Diisocyanate (TDI).

2,4- and 2,6-isomers of toluene diisocyanates (2,4-TDI and 2,6-TDI) are important raw materials in the polyurethane industry. These reactive compounds associate even under ambient conditions to form oligomers, changing the physicochemical properties of the raw material. Kinetically and thermodynamically relevant dimerization reactions were selected based on G3MP2B3 calculations from all possible dimers of phenyl isocyanate using these isocyanates as proxies. As it turned out, only the formation of the diazetidine-2,4-dione ring (11-dimer, uretdione) resulted in a species having an exothermic enthalpy of formation (-30.4 kJ/mol at 298.15 K). The oxazetidin-2-one ring product (1-2-dimer) had a slightly endothermic standard enthalpy of formation (37.2 kJ/mol at 298.15 K). The mechanism of the relevant cyclodimerization reactions was investigated further for 2,4-TDI and 2,6-TDI species using G3MP2B3 and SMD solvent model for diazetidine as well as oxazetidin-2-one ring formation. The formation of the uretdione ring structures, from the 2,4-TDI dimer with both NCO groups in the meta position for each phenyl ring and one methyl group in the para and one in the meta position, had the lowest-lying transition state (Δ#E0= 94.4 kJ/mol) in the gas phase. The one- and two-step mechanisms of the TDI cyclotrimerization were also studied based on the quasi-G3MP2B3 (qG3MP2B3) computational protocol. The one-step mechanism had an activation barrier as high as 149.0 kJ/mol, while the relative energies in the two-step mechanism were significantly lower for both transition states in the gas phase (94.7 and 60.5 kJ/mol) and in ODCB (87.0 and 54.0 kJ/mol).

Computational Elucidation of the Solvent-Dependent Addition of 4-Hydroxy-2-nonenal (HNE) to Cysteine and Cysteinate Residues.

The lipid peroxidation end product, 4-hydroxy-2-nonenal (HNE), is a secondary mediator of oxidative stress due to its strong ability to form adducts to the side chains of lysine, histidine, and cysteine residues (Cys) at increasing reactivities. This reaction can take place in various cellular environments and may be dependent on solvent. Moreover, approximately 10% of cysteine residues within the cells exist as the negatively charged cysteinate, which may also have a distinct reactivity toward HNE. In this study, quantum chemical calculations are used to investigate the reactivity of HNE toward Cys and cysteinate in three distinct solvent environments to mimic the aqueous, polar, and hydrophobic regions within the cell. Water enhances the reactivity of HNE to cysteine compared to that of the polar and hydrophobic solvents, and the reactivity of HNE is further augmented when Cys is first ionized to cysteinate. This is also confirmed by the transition state rate constant calculations. This study reveals the role of solvent polarity in these reactions and how cysteinate can account for the seemingly high reactivity of HNE toward Cys compared to other amino acid residues and demonstrates how a strong nucleophile can enhance the reactivity of an antioxidant analogue of the Cys residue.

Antioxidant Potential of Santowhite as Synthetic and Ascorbic Acid as Natural Polymer Additives.

A wide variety of additives are used to improve specific characteristics of the final polymeric product. Antioxidant additives (AAs) can prevent oxidative stress and thus the damage of polymeric materials. In this work, the antioxidant potential and thus the applicability of Santowhite (SW) as synthetic and ascorbic acid (Asc) as natural AAs were explored by using computational tools. Two density functional theory (DFT) methods, M05-2X and M06-2X, have been applied in combination with the 6-311++G(2d,2p) basis set in gas phase. Three antioxidant mechanisms have been considered: hydrogen atom transfer (HAT), single electron transfer-proton transfer (SET-PT), and sequential proton loss electron transfer (SPLET). Bond dissociation enthalpy (BDE), ionization potential (IP), proton dissociation enthalpy (PDE), proton affinity (PA), and electron transfer enthalpy (ETE) have been computed for each potential hydrogen donor site. The results indicate that the antioxidant potential of Asc is higher than SW. Furthermore, some of the C-H bonds, depending on their position in the structures, are potent radical scavengers, but O-H groups are more prone to donate H-atoms to free radicals. Nonetheless, both additives can be potentially applied to safeguard common polymers and prohibit oxidative stress-induced material deterioration.

The Effect of Pore Volume on the Behavior of Polyurethane-Foam-Based Pressure Sensors.

In this work, three different polyurethane (PU) foams were prepared by mixing commonly used isocyanate and polyol with different isocyanate indices (1.0:0.8, 1.0:1.0, 1.0:1.1). Then, the prepared polyurethane foam samples were coated by dip-coating with a fixed ratio of nitrogen-doped, bamboo-shaped carbon nanotubes (N-BCNTs) to obtain pressure sensor systems. The effect of the isocyanate index on the initial resistance, pressure sensitivity, gauge factor (GF), and repeatability of the N-BCNT/PU pressure sensor systems was studied. The pore volume was crucial in finetuning the PU-foam-based sensors ability to detect large strain. Furthermore, large pore volume provides suitable spatial pores for elastic deformation. Sensors with large pore volume can detect pressure of less than 3 kPa, which could be related to their sensitivity in the high range. Moreover, by increasing the pore volume, the electrical percolation threshold can be achieved with a minimal addition of nanofillers. On the other hand, PU with a smaller pore volume is more suitable to detect pressure above 3 kPa. The developed sensors have been successfully applied in many applications, such as motion monitoring and vibration detection.

Development of Palladium and Platinum Decorated Granulated Carbon Nanocomposites for Catalytic Chlorate Elimination.

Granulated carbon nanotube-supported palladium and platinum-containing catalysts were developed. By using these, remarkable catalytic activity was achieved in chlorate ion hydrogenation. Nitrogen-doped bamboo-like carbon nanotubes (N-BCNTs) loaded gel beads were prepared by using Ca2+, Ni2+ or Fe3+ ions as precursors for cross-linking of sodium alginate. The gel beads were carbonized at 800 °C, and these granulated carbon nanocomposites (GCNC) were used as supports to prepare palladium and platinum-containing catalysts. All in all, three catalysts were developed and, in each case, >99 n/n% chlorate conversion was reached in the aqueous phase by using the Pd-Pt containing GCNCs, moreover, these systems retained their catalytic activity even after repeated use.

Understanding the pH Dependence of Supersaturation State-A Case Study of Telmisartan.

Creating supersaturating drug delivery systems to overcome the poor aqueous solubility of active ingredients became a frequent choice for formulation scientists. Supersaturation as a solution phenomenon is, however, still challenging to understand, and therefore many recent publications focus on this topic. This work aimed to investigate and better understand the pH dependence of supersaturation of telmisartan (TEL) at a molecular level and find a connection between the physicochemical properties of the active pharmaceutical ingredient (API) and the ability to form supersaturated solutions of the API. Therefore, the main focus of the work was the pH-dependent thermodynamic and kinetic solubility of the model API, TEL. Based on kinetic solubility results, TEL was observed to form a supersaturated solution only in the pH range 3-8. The experimental thermodynamic solubility-pH profile shows a slight deviation from the theoretical Henderson-Hasselbalch curve, which indicates the presence of zwitterionic aggregates in the solution. Based on pKa values and the refined solubility constants and distribution of macrospecies, the pH range where high supersaturation-capacity is observed is the same where the zwitterionic form of TEL is present. The existence of zwitterionic aggregation was confirmed experimentally in the pH range of 3 to 8 by mass spectrometry.