RESUMO
The effects of a peripheral protein - cholesterol oxidase (3ß-hydroxysteroid oxidase, ChOx) on the characteristics of model lipid membranes composed of cholesterol, cholesterol:sphingomyelin (1:1), and the raft model composed of DOPC:Chol:SM (1:1:1) were investigated using two membrane model systems: the flat monolayer prepared by the Langmuir technique and the curved model consisting of liposome of the same lipids. The planar monolayers and liposomes were employed to follow membrane cholesterol oxidation to cholestenone catalyzed by ChOx and changes in the lipid membrane structure accompanying this reaction. Changes in the structure of liposomes in the presence of the enzyme were reflected in the changes of hydrodynamic diameter and fluorescence microscopy images, while changes of surface properties of planar membranes were evaluated by grazing incidence X-ray diffraction (GIXD) and Brewster angle microscopy. UV-Vis absorbance measurements confirmed the activity of the enzyme in the tested systems. A better understanding of the interactions between the enzyme and the cell membrane may help in finding alternative ways to decrease excessive cholesterol levels than the common approach of treating hypercholesterolemia with statins, which are not free from undesirable side effects, repeatedly reported in the literature and observed by the patients.
RESUMO
Processes of water condensation and desublimation on solid surfaces are ubiquitous in nature and essential for various industrial applications, which are crucial for their performance. Despite their significance, these processes are not well understood due to the lack of methods that can provide insight at the nanolevel into the very first stages of phase transitions. Taking advantage of synchrotron grazing-incidence wide-angle X-ray scattering (GIWAXS) and environmental scanning electron microscopy (ESEM), two pathways of the frosting process from supersaturated vapors were studied in real time for substrates with different wettabilities ranging from highly hydrophilic to superhydrophobic. Within GIWAXS, a fully quantitative structural and orientational characterization of the undergoing phase transition reveals the information on degree of crystallinity of the new phase and determines the ordering at the surfaces and inside the films at the initial stages of water/ice nucleation from vapor onto the substrates. The diversity of frosting scenarios, including direct desublimation from the vapor and two-stage condensation-freezing processes, was observed by both GIWAXS and ESEM for different combinations of substrate wettability and vapor supersaturations. The classical nucleation theory straightforwardly predicts the pathway of the phase transition for hydrophobic and superhydrophobic substrates. The case of hydrophilic substrates is more intricate because the barriers in Gibbs free energy for nucleating both liquid and solid embryos are close to each other and comparable to thermal energy kBT. At that end, classical nucleation theory allows concluding a relation between contact angles for ice and water embryos on the basis of the observed frosting pathway.
RESUMO
Economist Nobelist Thomas C. Schelling (1921-2016) is known for his contribution to the analysis of international conflict and many see him as the Cold Warrior par excellence. At a time of great uncertainties and dangers, Schelling combined a deep understanding of strategic analysis, a detailed knowledge of US commitments around the world and an inimitable talent for dissecting everyday behavior, which made him a think tank all on his own. When he turned to the analysis of bargaining in the mid-1950s, one question dominated policy discussions: "How to demonstrate the US commitment to the 'free world'"? Schelling answered unequivocally: By restricting one's choices so as to shift others' expectations and thereby influence their behavior in the desired direction. By the mid-1970s, after he had broken with the US administration and joined the Committee on Substance Abuse and Habitual Behavior, Schelling transposed the tactics deployed in international conflict to the analysis of individuals trying to achieve self-control. In the process, he reproduced the logic of military conflict at the level of the self. The view of a conflicted self itself comprised of two selves made restricted choice the daily routine of individuals who wish to avoid the negative consequences of their present behavior in the future while it promised those who enjoy unbounded freedom of choice an unsettling future.
Assuntos
Controle Comportamental , Militares , Humanos , MasculinoRESUMO
The tear film lipid layer (TFLL) is a unique biological membrane that serves a pivotal role in the maintenance of ocular surface health. Reaching an overarching understanding of the functional principle of the TFLL has been hampered by a lack of insights into the structural and functional roles played by individual lipid classes. To bridge this knowledge gap, we herein focus on studying films formed by principal lipid classes by surface scattering methods. Through grazing incidence X-ray diffraction and X-ray reflectivity studies, we reveal quantitative data about the lattice distances, molecular tilt angles, and mono/multilayer thickness and density profiles for central TFLL lipid classes under close to simulated physiological conditions. In addition, we discuss the correlation of the results to those obtained previously with the natural lipid composition of meibum.
Assuntos
Lipídeos , Lágrimas , Lágrimas/química , Lágrimas/fisiologia , Lipídeos/química , Estrutura Molecular , Raios X , Difração de Raios XRESUMO
Interfaces in perovskite solar cells (PSCs) play a pivotal role in determining device performance by influencing charge transport and recombination. Understanding the physical processes at these interfaces is essential for achieving high-power conversion efficiency in PSCs. Particularly, the interfaces involving oxide-based transport layers are susceptible to defects like dangling bonds, excess oxygen, or oxygen deficiency. To address this issue, the surface of NiOx is passivated using octadecylphosphonic acid (ODPA), resulting in improved charge transport across the perovskite hole transport layer (HTL) interface. This surface treatment has led to the development of hysteresis-free devices with an impressive ≈13% increase in power conversion efficiency. Computational studies have explored the halide perovskite architecture of ODPA-treated HTL/Perovskite, aiming to unlock superior photovoltaic performance. The ODPA surface functionalization has demonstrated enhanced device performance, characterized by superior charge exchange capacity. Moreover, higher band-to-band recombination in photoluminescence and electroluminescence indicates presence of lower mid-gap energy states, thereby increasing the effective photogenerated carrier density. These findings are expected to promote the utilization of various phosphonic acid-based self-assembly monolayers for surface passivation of oxide-based transport layers in perovskite solar cells. Ultimately, this research contributes to the realization of efficient halide PSCs by harnessing the favorable architecture of NiOx interfaces.
RESUMO
The SIRIUS beamline of Synchrotron SOLEIL is dedicated to X-ray scattering and spectroscopy of surfaces and interfaces, covering the tender to mid-hard X-ray range (1.1-13â keV). The beamline has hosted a wide range of experiments in the field of soft interfaces and beyond, providing various grazing-incidence techniques such as diffraction and wide-angle scattering (GIXD/GIWAXS), small-angle scattering (GISAXS) and X-ray fluorescence in total reflection (TXRF). SIRIUS also offers specific sample environments tailored for in situ complementary experiments on solid and liquid surfaces. Recently, the beamline has added compound refractive lenses associated with a transfocator, allowing for the X-ray beam to be focused down to 10â µm × 10â µm while maintaining a reasonable flux on the sample. This new feature opens up new possibilities for faster GIXD measurements at the liquid-air interface and for measurements on samples with narrow geometries.
RESUMO
Many ionic surfactants, such as sodium dodecyl sulfate (SDS) crystallize out of solution if the temperature falls below the crystallization boundary. The crystallization temperature is impacted by solution properties and can be decreased with the addition of salt. We studied SDS crystallization at liquid/vapor interfaces from solutions at high ionic strength (sodium chloride). We show that the surfactant crystals at the surface grow from adsorbed SDS molecules, as evidenced by the preferential orientation of the crystals identified by using grazing incidence X-ray diffraction. We find a unique time scale for the crystal growth from the evolution of structure, surface tension, and visual inspection, which can be controlled through varying the SDS or NaCl concentrations.
RESUMO
The water surface provides a highly effective platform for the synthesis of two-dimensional polymers (2DP). In this study, we present an efficient on-water surface synthesis of crystalline monolayer 2D polyimide (2DPI) through the imidization reaction between tetra (4-aminophenyl) porphyrin (M1) and perylenetracarboxylic dianhydride (M2), resulting in excellent stability and coverage over a large area (tens of cm2). We further fabricate innovative organic-inorganic hybrid van der Waals heterostructures (vdWHs) by combining with exfoliated few-layer molybdenum sulfide (MoS2). High-resolution transmission electron microscopy (HRTEM) reveals face-to-face stacking between MoS2 and 2DPI within the vdWH. This stacking configuration facilitates remarkable charge transfer and noticeable n-type doping effects from monolayer 2DPI to MoS2, as corroborated by Raman spectroscopy, photoluminescence measurements, and field-effect transistor (FET) characterizations. Notably, the 2DPI-MoS2 vdWH exhibits an impressive electron mobility of 50 cm2/V·s, signifying a substantial improvement over pristine MoS2 (8 cm2/V·s). This study unveils the immense potential of integrating 2D polymers to enhance semiconductor device functionality through tailored vdWHs, thereby opening up exciting new avenues for exploring unique interfacial physical phenomena.
RESUMO
Controlling site-selectivity and reactivity in chemical reactions continues to be a key challenge in modern synthetic chemistry. Here, we demonstrate the discovery of site-selective chemical reactions on the water surface via a sequential assembly approach. A negatively charged surfactant monolayer on the water surface guides the electrostatically driven, epitaxial, and aligned assembly of reagent amino-substituted porphyrin molecules, resulting in a well-defined J-aggregated structure. This constrained geometry of the porphyrin molecules prompts the subsequent directional alignment of the perylenetetracarboxylic dianhydride reagent, enabling the selective formation of a one-sided imide bond between porphyrin and reagent. Surface-specific in-situ spectroscopies reveal the underlying mechanism of the dynamic interface that promotes multilayer growth of the site-selective imide product. The site-selective reaction on the water surface is further demonstrated by three reversible and irreversible chemical reactions, such as imide-, imine-, and 1, 3-diazole (imidazole)- bonds involving porphyrin molecules. This unique sequential assembly approach enables site-selective chemical reactions that can bring on-water surface synthesis to the forefront of modern organic chemistry.
RESUMO
The photosensitizer Phenalenone (PN) was grafted with one or two lipid (C18) chains to form pure nano-assemblies or mixed lipid vesicles suitable for photodynamic therapy. Mixtures of PN-C18 conjugates with stearoyl-oleoyl phosphatidylcholine (SOPC) form vesicles that disintegrate into bilayer sheets as the concentration of PN-C18 conjugates increases. We hypothesized that PN-C18 conjugates control the thermodynamic and structural properties of the mixtures and induce the disintegration of vesicles due to PN π-π-interactions. Monolayers were analyzed by surface pressure and grazing incidence X-ray diffraction (GIXD) measurements, and vesicles by differential scanning calorimetry and cryo-TEM. The results showed that PN-triazole-C18 (1A) and PN-NH-C18 (1B) segregate from the phospholipid domains. PN-(C18)2 (conjugate 2) develops favorable interactions with SOPC and distearoyl-phosphatidylcholine (DSPC). GIXD demonstrates the contribution of SOPC to the structuring of conjugate 2 and the role of the major component in controlling the structural properties of DSPC-conjugate 2 mixtures. Above 10 mol% conjugate 2 in SOPC vesicles, the coexistence of domains with different molecule packing leads to conjugate segregation, vesicle deformation, and the formation of small bilayer discs stabilized by the inter-bilayer π-π stacking of PN molecules.
Assuntos
Fosfolipídeos , Fármacos Fotossensibilizantes , Fosfolipídeos/química , Fosfatidilcolinas/química , Termodinâmica , Lecitinas , Bicamadas Lipídicas/químicaRESUMO
Lipid rafts are condensed regions of cell membranes rich in cholesterol and sphingomyelin, which constitute the target for anticholesterolemic drugs - statins. In this work, we use for the first time a combined grazing-incidence X-ray diffraction (GIXD)/polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS)/Brewster angle microscopy (BAM) approach to show the statin effect on model lipid rafts and its components assembled in Langmuir monolayers at the air-water interface. Two representatives of these drugs, fluvastatin (FLU) and cerivastatin (CER), of different hydrophobicity were chosen, while cholesterol (Chol) and sphingomyelin (SM), and their 1:1 mixture were selected to form condensed monolayers of lipid rafts. The effect of statins on the single components of lipid rafts indicated that both the hydrophobicity of the drugs and the organization of the layer determined the drug-lipid interaction. For cholesterol monolayers, only the most hydrophobic CER was effectively changing the film structure, while for the less organized sphingomyelin, the biggest effect was observed for FLU. This drug affected both the polar headgroup region as shown by PM-IRRAS results and the 2D crystalline structure of the SM monolayer as evidenced by GIXD. Measurements performed for Chol/SM 1:1 models proved also that the statin effect depends on the presence of Chol-SM complexes. In this case, the less hydrophobic FLU was not able to penetrate the binary layer at all, while exposure to the hydrophobic CER resulted in the phase separation and formation of ordered assemblies. The changes in the membrane properties were visualized by BAM images and GIXD patterns and confirmed by thermodynamic parameters of hysteresis in the Langmuir monolayer compression-decompression experiments.
Assuntos
Inibidores de Hidroximetilglutaril-CoA Redutases , Esfingomielinas , Esfingomielinas/química , Difração de Raios X , Incidência , Colesterol/química , Espectrofotometria Infravermelho , Microdomínios da Membrana/metabolismo , Propriedades de SuperfícieRESUMO
Grazing incidence wide angle X-ray scattering measurements on aligned titanium oxide nanowires displaying anisotropic optical-electronic properties are carried out. Elemental and thermal analyses provide a chemical composition corresponding to H2Ti3O7·nH2O with n ≈ 1 while the crystallographic data indicate a monoclinic cell with a lamellar substructure. Cell parameters are close to those of H2Ti3O7 notwithstanding a doubling of the lattice in the layer plane. A comparison of the band gap energy values and the electronic transition modes between the two polymorphs displays differences that could be ascribed to the structural variation.
RESUMO
The formation of ultrathin films of Rh-based porous metal-organic polyhedra (Rh-MOPs) by the Langmuir-Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air-water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)12 and HRhMOP(oiz)12) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air-liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)12 films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO2/N2 separation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation.
RESUMO
This work reports the feasibility of polybutadiene (PB) cross-linking under UV irradiation in the presence of a linear polymer, cellulose acetate (CA), to form semi-interpenetrating polymer networks at the air-water interface. The thermodynamic properties and the morphology of two-dimensional (2D) CA/PB blends are investigated after UV irradiation and for a wide range of CA volume fractions. A contraction of the mixed Langmuir films is observed independent of the composition, in agreement with that recorded for the individual PB monolayer after cross-linking. The PB network formation is demonstrated by in situ sum-frequency generation spectroscopy on the equivolumic CA/PB mixed film. From Brewster angle microscopy observations, the PB network synthesis does not induce any morphology change at the mesoscopic scale, and all of the mixed films remain homogeneous laterally. In situ neutron reflectometry is used to probe the effect of PB cross-linking on the vertical structure of CA/PB mixed films. For all studied compositions, significant thickening of the films is evidenced, consistent with their contraction ratio. This thickening is accompanied by a partial expulsion of the PB toward the film-air interface, which is attributed to the hydrophobic character of the PB. This phenomenon is stronger for films rich in PB. In particular, the structure of the PB-rich film undergoes a transition from vertically homogeneous to inhomogeneous along the depth. 2D semi-interpenetrating polymer networks can thus be synthesized at the air-water interface with a morphology that is strongly influenced by the polymer-polymer and polymer-environment interactions.
RESUMO
The interactions of anthracyclines with biological membranes strongly depend on the drug lipophilicity, which might also determine the specific affinity to cholesterol molecules. Therefore, in this work we show the studies concerning the effect of two selected anthracyclines, daunorubicin (DNR) and idarubicin (IDA) on simple models of healthy (DMPC:Chol 7:3) and cancer cells membranes with increased level of cholesterol (DMPC:Chol 3:7) as well as pure cholesterol monolayers prepared at the air-water interface and supported on gold surface. It has been shown that more lipophilic IDA is able to penetrate cholesterol monolayers more effectively than DNR due to the formation of IDA-cholesterol arrangements at the interface, as proved by the thermodynamic analysis of compression-expansion cycles. The increased interactions of IDA were also confirmed by the time measurements of pre-compressed monolayers exposed to drug solutions as well as grazing incidence X-ray diffraction studies demonstrating differences in the 2D organization of cholesterol monolayers. Langmuir studies of mixed DMPC:Chol membranes revealed the reorganization of molecules in the cancer cell models at the air-water interface at higher surface pressures due to the removal of DNR, while increased affinity of IDA towards cholesterol allowed this drug to penetrate the layer more efficiently without its removal. The SEIRAS spectra obtained for supported DMPC:Chol bilayers proved that IDA locates both in the ester group and in the acyl chain region of the bilayer, while DNR does not penetrate the membranes as deeply as IDA. The increased penetration of the mixed phospholipid layers by idarubicin might be attributed to the higher lipophilicity caused by the lack of methoxy group and resulting in a specific affinity towards cholesterol.
Assuntos
Antraciclinas , Antibióticos Antineoplásicos , Antibióticos Antineoplásicos/metabolismo , Membrana Celular/metabolismo , Colesterol , Daunorrubicina/metabolismoRESUMO
The phase diagram of the Langmuir film of diacetylene alcohol-henicosa-5,7-diyn-1-ol-is investigated by means of surface pressure versus surface area isotherms, Brewster angle microscopy, X-ray reflectivity, and grazing incident X-ray diffraction. Among the usual phases described in the generic phase diagram of small head group molecules, one observes an unexpected reversible transition from an ordered condensed phase to a disordered one upon increasing the surface pressure. We postulate that the origin of this unusual, unprecedented transition results from the competition between the interactions between the diacetylene blocks in the hydrophobic chain and the hydrogen bonds between head groups and water.
RESUMO
Amphiphilic peptides that induce catalysis are interesting alternatives to natural enzymes thanks to robustness of their synthesis and the ability to induce certain types of conformations by specific motifs of amino acid sequences. Various studies aimed at mimicking the activity of serine proteases by designed peptides. Here we demonstrate that the order by which the catalytic triad residues are positioned along amphiphilic ß-strands influences both assembly structures and catalytic activity. A set of three ß-sheet amphiphilic peptides, decorated with different orders of the catalytic triad amino acids, Glu, His and Ser along the strands were evaluated for their catalytic hydrolysis efficiency of p-nitrophenyl acetate (pNPA) substrate. Among the three peptides, Ac-Cys-Phe-Glu-Phe-Ser-Phe-His-Phe-Pro-NH2 (ESH) achieved the greatest catalytic efficiency with a value of 0.19 M-1 s-1, at peptide concentration of 250 µM. This study sheds light on an overlooked factor in designing catalytic amphiphilic assemblies whereby charged residues that make up the active sites, are in fact engaged in intermolecular stabilizing interactions that in turn may hamper their catalytic action.
Assuntos
Aminoácidos , Peptídeos , Sequência de Aminoácidos , Catálise , HidróliseRESUMO
Omeprazole is usually administered under an enteric coating. However, there is a Food and Drug Administration-approved strategy that enables its release in the stomach. When locally absorbed, omeprazole shows a higher efficacy and a cytoprotective effect, whose mechanism was still unknown. Therefore, we aimed to assess the effect of the absorption route on the gastric mucosa. 2D and 3D models of dipalmitoylphosphatidylcholine (DPPC) at different pH values (5.0 and 7.4) were used to mimic different absorption conditions. Several experimental techniques, namely, fluorescence studies, X-ray scattering methodologies, and Langmuir monolayers coupled with microscopy, X-ray diffraction, and infrared spectroscopy techniques, were combined with molecular dynamics simulations. The results showed that electrostatic and hydrophobic interactions between omeprazole and DPPC rearranged the conformational state of DPPC. Omeprazole intercalates among DPPC molecules, promoting domain formation with untilted phospholipids. Hence, the local release of omeprazole enables its action as a phospholipid-like drug, which can reinforce and protect the gastric mucosa.
Assuntos
Composição de Medicamentos , Omeprazol/metabolismo , 1,2-Dipalmitoilfosfatidilcolina/química , Liberação Controlada de Fármacos , Polarização de Fluorescência , Concentração de Íons de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Bicamadas Lipídicas/química , Bicamadas Lipídicas/metabolismo , Simulação de Dinâmica Molecular , Omeprazol/química , Transição de Fase , Espalhamento a Baixo Ângulo , Eletricidade Estática , Difração de Raios XRESUMO
Binary blends of water-insoluble polymers are a versatile strategy to obtain nanostructured films at the air-water interface. However, there are few reported structural studies of such systems in the literature. Depending on the compatibility of the polymers and the role of the air-water interface, one can expect various morphologies. In that context, we probed Langmuir monolayers of cellulose acetate (CA), of deuterated and postoxidized polybutadiene (PBd) and three mixtures of CA/PBd at various concentrations by coupling surface pressure-area isotherms, Brewster angle microscopy (BAM), and neutron reflectometry at the air-water interface to determine their thermodynamic and structural properties. The homogeneity of the films in the vertical direction, averaged laterally over the spatial coherence length of the neutron beam (â¼5 µm), was assessed by neutron reflectometry measurements using D2O/H2O subphases contrast-matched to the mixed films. At 5 mN/m, the whole mixed films can be described by a single slightly hydrated thin layer. However, at 15 mN/m, the fit of the reflectivity curves requires a two-layer model consisting of a CA/PBd blend layer in contact with the water, interdiffused with a PBd layer at the interface with air. At intermediate surface pressure (10 mN/m), the determined structure was between those obtained at 5 and 15 mN/m depending on film composition. This PBd enrichment at the air-film interface at high surface pressure, which leads to the PBd depletion in the blend monolayer at the water surface, is attributed to the hydrophobic character of this polymer compared with the predominantly hydrophilic CA.
RESUMO
A consensus has yet to emerge whether deep brain stimulation (DBS) for treatment-refractory obsessive-compulsive disorder (OCD) can be considered an established therapy. In 2014, the World Society for Stereotactic and Functional Neurosurgery (WSSFN) published consensus guidelines stating that a therapy becomes established when "at least two blinded randomized controlled clinical trials from two different groups of researchers are published, both reporting an acceptable risk-benefit ratio, at least comparable with other existing therapies. The clinical trials should be on the same brain area for the same psychiatric indication." The authors have now compiled the available evidence to make a clear statement on whether DBS for OCD is established therapy. Two blinded randomized controlled trials have been published, one with level I evidence (Yale-Brown Obsessive Compulsive Scale (Y-BOCS) score improved 37% during stimulation on), the other with level II evidence (25% improvement). A clinical cohort study (N = 70) showed 40% Y-BOCS score improvement during DBS, and a prospective international multi-center study 42% improvement (N = 30). The WSSFN states that electrical stimulation for otherwise treatment refractory OCD using a multipolar electrode implanted in the ventral anterior capsule region (including bed nucleus of stria terminalis and nucleus accumbens) remains investigational. It represents an emerging, but not yet established therapy. A multidisciplinary team involving psychiatrists and neurosurgeons is a prerequisite for such therapy, and the future of surgical treatment of psychiatric patients remains in the realm of the psychiatrist.