Epidemiology and diagnosis of metabolic dysfunction-associated fatty liver disease.

The most common chronic liver illness worldwide is metabolic dysfunction linked to fatty liver disease (MAFLD), which is poorly understood by doctors and patients. Many people with this disease develop steatohepatitis, cirrhosis and its consequences, as well as extrahepatic manifestations; these conditions are particularly common if they are linked to diabetes mellitus or obesity. A breakthrough with numerous benefits is the switch from NAFLD to MAFLD in terms of terminology and methodology. The diagnosis of MAFLD is based on affirmative criteria; unlike NAFLD, it is no longer based on exclusion. The diagnosis of MAFLD and the evaluation of steatosis and fibrosis is achieved using liver biopsy and non-invasive laboratory or radiographic techniques. We briefly address the most recent developments in MAFLD epidemiology and diagnosis.

A global survey on the use of the international classification of diseases codes for metabolic dysfunction-associated fatty liver disease.

BACKGROUND: With the implementation of the 11th edition of the International Classification of Diseases (ICD-11) and the publication of the metabolic dysfunction-associated fatty liver disease (MAFLD) nomenclature in 2020, it is important to establish consensus for the coding of MAFLD in ICD-11. This will inform subsequent revisions of ICD-11. METHODS: Using the Qualtrics XM and WJX platforms, questionnaires were sent online to MAFLD-ICD-11 coding collaborators, authors of papers, and relevant association members. RESULTS: A total of 890 international experts in various fields from 61 countries responded to the survey. We also achieved full coverage of provincial-level administrative regions in China. 77.1% of respondents agreed that MAFLD should be represented in ICD-11 by updating NAFLD, with no significant regional differences (77.3% in Asia and 76.6% in non-Asia, p = 0.819). Over 80% of respondents agreed or somewhat agreed with the need to assign specific codes for progressive stages of MAFLD (i.e. steatohepatitis) (92.2%), MAFLD combined with comorbidities (84.1%), or MAFLD subtypes (i.e., lean, overweight/obese, and diabetic) (86.1%). CONCLUSIONS: This global survey by a collaborative panel of clinical, coding, health management and policy experts, indicates agreement that MAFLD should be coded in ICD-11. The data serves as a foundation for corresponding adjustments in the ICD-11 revision.

Electromyography signal based hand gesture classification system using Hilbert Huang transform and deep neural networks.

This research aims to provide the groundwork for smartly categorizing hand movements for use with prosthetic hands. The hand motions are classified using surface electromyography (sEMG) data. In reaction to a predetermined sequence of fibre activation, every single one of our muscles contracts. They could be useful in developing control protocols for bio-control systems, such human-computer interaction and upper limb prostheses. When focusing on hand gestures, data gloves and vision-based approaches are often used. The data glove technique requires tedious and unnatural user engagement, whereas the vision-based solution requires significantly more expensive sensors. This research offered a Deep Neural Network (DNN) automated hand gesticulation recognition system based on electromyography to circumvent these restrictions. This work primarily aims to augment the concert of the hand gesture recognition system via the use of an artificial classifier. To advance the recognition system's classification accuracy, this study explains how to build models of neural networks and how to use signal processing methods. By locating the Hilbert Huang Transform (HHT), one may get the essential properties of the signal. When training a DNN classifier, these characteristics are sent into it. The investigational results reveal that the suggested technique accomplishes a better categorization rate (98.5 % vs. the alternatives).

Endoscopic-Assisted Cochlear Implantation in Far Advanced Otosclerosis.

OBJECTIVES: To evaluate the effectiveness of cochlear implantation (CI) in case of far advanced otosclerosis and to evaluate the value of using intraoperative otoendoscopy to facilitate the identification of the round window membrane and the scala tympani without the need to remove the posterior canal wall or to perform a subtotal petrosectomy. STUDY DESIGN: Retrospective case-series study. SETTING: Tertiary academic CI center. PATIENTS AND METHODS: This study was conducted on patients with far advanced otosclerosis who underwent endoscopic-assisted CI between January 2010 and June 2020 at the same CI center. The minimum follow-up period was 2 years after surgery. RESULTS: Fourteen patients were included in the study. Ten patients had undergone a previous stapedotomy. Electrode insertion in the scala tympani was successfully accomplished in all cases included in the study. There was a statistically significant improvement in pure-tone average and speech discrimination scores in all cases of the study group (p < 0.0001). There were no statistically significant differences in postoperative pure-tone average or speech discrimination scores between cases with and without cochlear ossification or between cases with and without a previous stapedotomy (p > 0.05). CONCLUSION: Endoscopic-assisted CI is an effective option for hearing restoration in patients with far advanced otosclerosis. Otoendoscopy can facilitate visualization and access to the scala tympani without the need to remove the posterior canal wall or to perform a subtotal petrosectomy.

Changes in the Etiologies of Liver Cancer in Upper Egypt over a Decade from 2010 to 2020: A Single Tertiary Care Center Study.

Yasser Fouad The profile of liver diseases in Egypt is changing dramatically and viral hepatitis is declining, while the fatty liver disease is increasing dramatically. However, the impact of these changes on the profile of hepatocellular carcinoma (HCC) remains uncertain. Therefore, we determined the temporal trends in the etiologies of HCC in Egypt over a decade. We retrospectively analyzed data from consecutive patients who were diagnosed with HCC over 10 years (2010-2020) in a large center in Upper Egypt. Standard tests were utilized to diagnose hepatitis C virus (HCV) and hepatitis B virus. In the absence of other liver disorders, the presence of obesity, or diabetes in the absence of other risk factors, metabolic dysfunction-associated fatty liver disease (MAFLD) was diagnosed. A total of 1,368 HCC patients were included, in which 985 (72%) had HCV, 58 (4%) had hepatitis B virus, and 143 (10.5%) had MAFLD, 1 patient had hemochromatosis, 1 had autoimmune liver disease, and 180 (13%) patients were with unknown cause. The annual proportions of MAFLD-related HCC were increased significantly between 8.3% in 2010 and 20.6% in 2020 ( p = 0.001), while HCV-related HCC declined from 84.8 to 66.7% ( p = 0.001). Throughout the study period, there were significant increases in the age at diagnosis of HCC, the proportion of female patients, obesity, diabetes, and less severe liver dysfunction at diagnosis ( p < 0.05 for all). With the decline of HCV, MAFLD is becoming a major cause of HCC in Egypt, which has increased substantially over the past 10 years. This study urges the creation of comprehensive action strategies to address this growing burden.

MAFLD identifies patients with significant hepatic fibrosis better than MASLD.

BACKGROUND AND AIMS: Diagnostic criteria for metabolic dysfunction-associated steatotic liver disease (MASLD) have been proposed but not yet validated. This study aimed to compare the diagnostic accuracy of the MASLD definition with the existing criteria for metabolic dysfunction-associated fatty liver disease (MAFLD) in identifying patients with significant fibrosis. METHODS: The analysis included a total of 8317 individuals who had complete biochemical and liver ultrasonography data from the National Health and Nutrition Examination Survey (2017-2020). In this study, significant fibrosis (≥ F2) was determined by a median liver stiffness of ≥ 8.0 kPa. To identify independent factors associated with significant fibrosis, multivariable logistic regression analyses were applied. RESULTS: MAFLD (OR 3.44; 95% CI 2.88-4.12; P < 0.0001) has a trend for stronger and independent association with significant fibrosis compared to MASLD (OR 2.63; 95% CI 2.22-3.11; P < 0.0001). Non-MASLD MAFLD is independently associated with a 14.28-fold higher odds of significant fibrosis compared to non-MAFLD MASLD. The sensitivity for detecting significant fibrosis for MAFLD and MASLD was 76.23% vs 69.94%, respectively. The performance of MAFLD remains consistent in a sub-analysis of patients with no or mild alcohol intake. CONCLUSIONS: The definition of MAFLD provides a more precise identification of individuals who have both fatty liver and significant fibrosis, assessed by non-invasive tests.

Turning trash into treasure: Torrefaction of mixed waste for improved fuel properties. A case study of metropolitan city.

Solid waste management is one of the biggest challenges of the current era. The combustible fractions in the waste stream turn out to be a good energy source if converted into refuse-derived fuel. Researchers worldwide are successfully converting it into fuel. However, certain challenges are associated with its application in gasifiers, boilers, etc. to co-fire it with coal. These include high moisture content, low calorific value, and difficulty to transport and store. The present study proposed torrefaction as a pretreatment of the waste by heating it in the range of 200 °C-300 °C in the absence of oxygen at atmospheric pressure. The combustible fraction from the waste stream consisting of wood, textile, paper, carton, and plastics termed as mixed waste was collected and torrefied at 225 °C, 250 °C, 275 °C, and 300 °C for 15 and 30 min each. It was observed that the mass yield and energy yield decreased to 45% and 62.96% respectively, but the energy yield tended to increase by the ratio of 1.39. Proximate analysis showed that the moisture content and volatile matter decreased for torrefied samples, whereas the ash content and fixed carbon content increased. Similarly, the elemental analysis revealed that the carbon content increased around 23% compared to raw samples with torrefaction contrary to hydrogen and oxygen, which decreased. Moreover, the higher heating value (HHV) of the torrefied samples increased around 1.3 times as compared to the raw sample. This pretreatment can serve as an effective solution to the current challenges and enhance refuse-derived fuel's fuel properties.

Computed tomography for the prediction of oesophageal variceal bleeding: A surrogate or complementary to the gold standard?

In this editorial we comment on the in-press article in the World Journal of Gastrointestinal endoscopy about the role of computed tomography (CT) for the prediction of esophageal variceal bleeding. The mortality and morbidity are much increased in patients with chronic liver diseases when complicated with variceal bleeding. Predicting the patient at a risk of bleeding is extremely important and receives a great deal of attention, paving the way for primary prophylaxis either using medical treatment including carvedilol or propranolol, or endoscopic band ligation. Endoscopic examination and the hepatic venous pressure gradient are the gold standards in the diagnosis and prediction of variceal bleeding. Several non-invasive laboratory and radiological examinations are used for the prediction of variceal bleeding. The contrast-enhanced multislice CT is a widely used non-invasive, radiological examination that has many advantages. In this editorial we briefly comment on the current research regarding the use of CT as a non-invasive tool in predicting the variceal bleeding.

Fatigue, depression, and sleep disorders are more prevalent in patients with metabolic-associated fatty liver diseases.

AIM: To determine the prevalence and risk factors for depression, sleep disturbances, and exhaustion in MAFLD patients. METHODS: Two hundred twenty-four consecutive patients with MAFLD attending the outpatient clinic from April to October 2023; were subjected to clinical evaluation, laboratory testing including non-invasive laboratory markers, fibroscan (measuring steatosis and fibrosis), and different quantitative and qualitative fatigue scores. A control group including 342 patients without MAFLD was taken. RESULTS: The prevalence of fatigue, depression, and sleeping disorders in the MAFLD group was 67.8%, 75%, 62.5% vs 21%, 16.4%, and 19.5% in the control group respectively ( P = <0.001, P = <0.001 and P = <0.001). MAFLD with fatigue was significantly associated with the presence and severity of steatosis and fibrosis by fibroscan ( P = <0.0001). By univariate and multivariate analysis: age, BMI, waist circumference, T2DM, hypertension, steatosis, fibrosis, and Fib-4 were considered risk factors for fatigue in the MAFLD group. The age, high social level, diabetes, hypertension, steatosis, fibrosis, and fib-4 were considered, by univariate and multivariate analysis, independent risk factors for depression in the MAFLD group. age, BMI, waist circumference, diabetes, hypertension, steatosis, fibrosis, and fib-4 were independent risk factors for sleep disorders in MAFLD. CONCLUSION: Fatigue, sleeping disorders, and depression are more prevalent in MAFLD patients than in the general population. The lower health utility scores in patients with MAFLD are associated with more advanced stages of the disease.

Mitigation of bio-corrosion characteristics of coronary artery stent by optimising fs-laser micromachining parameters.

Cardiovascular diseases, particularly coronary artery disease, pose big challenges to human life. Deployment of the stent is a preferable treatment for the above-mentioned disease. However, stents are usually made up of shape memory alloy called Nitinol. The poorer surface finish on the machined nitinol stents accelerates the migration of Nickel ions from the implanted nitinol stent, which is considered toxic and can lead to stenosis. The current study deals with controlling surface quality by minimising surface roughness and improving corrosion resistance. Femtosecond laser (fs-laser 10-15 s) micromachining was employed to machine the Nitinol surface to achieve sub-micron surface roughness. The Grey relational analysis (GRA)-coupled design of the experimental technique was implemented to determine optimal levels of four micromachining parameters (laser power, pulse frequency, scanning speed, and scanning pattern) varied at three levels to achieve minimum surface roughness and to maximise the volume ablation. The results show that to yield minimum surface roughness and maximum volume ablation, laser power and scanning speed are in a higher range. In contrast, the pulse frequency is lower, and the scanning pattern is in a zig-zag manner. ANOVA results manifest that scanning speed is the predominant factor in minimising surface roughness, followed by pulse frequency. Furthermore, the corrosion behaviour of the machined nitinol specimens was evaluated, and the results show that specimens with lower surface roughness had lower corrosion rates.

Modeling of Effect of Infill Density Percentage on Rotating Bending Fatigue Behavior of Additive-Manufactured PLA Polymers.

Nowadays, 3D PLA-printed parts are widely used in many applications, essentially using the fused filament fabrication technique. While the influence of printing parameters on quasi-static mechanical characterization has been extensively considered within the literature, there are limited accounts of this effect on fatigue performance. The two main aims of this research are first to investigate the effects of the infill density percentage on the fatigue life of dog-bone samples under rotating bending cycling loads, and second to model the fatigue life using Wöhler and Basquin models. The experiments exhibit a high variability of results, especially for low cyclic loads. The S-N curves show that the number of cycles at failure increases with the increase in the infill density percentage and decreases with the increase in loads. Investigations allow the formulation of each constant model as a function of the infill density percentage. The new fatigue model formulations exhibit good agreement with the experimental data. As an outcome of this study, the fatigue model for 3D-printed parts may be expressed as a function of the infill density percentage using fewer tests in the future and for other polymers used in fused filament fabrication.

The Use of a Unilateral Curved Spreader Graft in the Management of Crooked Nose Deformity.

AIM OF WORK: The aim of this study is to present a new technique of using spreader grafts in the correction of crooked nose deformity with C-shaped deviation of the middle third of the nose. PATIENTS AND METHODS: This is a prospective case series study conducted on 18 patients with crooked nose deformity with C-shaped deviation of the middle third of the nose. All of the patients were managed by open septorhinoplasty. During surgery, a curved spreader graft was harvested from the nasal septum and placed on the convex side of the C-shaped deviation of the dorsal part of the nasal septum. Objective measurements of the angles of external nasal deviation (END) and the internal nasal valve (INV) angles were performed before and 6 months after the surgery. Subjective assessment of aesthetic satisfaction by the visual analog scale and nasal function by the nasal obstruction symptom evaluation scale was also performed before and 6 months after surgery. RESULTS: Eighteen patients were enrolled in the study and completed the minimum follow-up period of 6 months. The mean follow-up period was 17.3 months. Objectively, there was highly significant ( P < 0.00001) improvement of the END angle and INV angle. Subjectively, there was also highly significant ( P < 0.00001) improvement of both the nasal obstruction symptom evaluation score and the visual analog scale score for aesthetic satisfaction. CONCLUSIONS: The insertion of a curved unilateral spreader graft over the convexity of the deviated nasal dorsum can correct the END, improve the collapsed INV on both sides, and consequently achieve satisfactory aesthetic and functional outcomes.

Recompensation in cirrhosis: unravelling the evolving natural history of nonalcoholic fatty liver disease.

Recompensation has gained increasing attention in the field of cirrhosis, particularly in chronic liver disease with a definite aetiology. The current global prevalence of obesity and nonalcoholic fatty liver disease (NAFLD) is increasing, but there is currently a lack of a clear definition for recompensation in NAFLD-related cirrhosis. Here, we provide an up-to-date perspective on the natural history of NAFLD, emphasizing the reversible nature of the disease, summarizing possible mechanisms underlying recompensation in NAFLD, discussing challenges that need to be addressed and outlining future research directions in the field. Recompensation is a promising goal in patients with NAFLD-related cirrhosis, and further studies are needed to explore its underlying mechanisms and uncover its clinical features.