RESUMO
This study is based on the fatty acid and amino acid profiles of seven edible insect species: Acheta domesticus, Alphitobius diaperinus, Blaptica dubia, Galleria mellonella, Locusta migratoria, Tenebrio molitor, and Zophobas morio. The aim of the present study is to provide new data on the fatty acid distributions among lipid classes as well as the species-specific protein conversion factor (Kp) of a wide range of insects in order to further improve the nutritional characterisation of insects as food. Oleic acid was the predominant fatty acid in all insects except for A. domesticus, in which a significantly higher percentage of linoleic acid was found. The majority of the lipids were neutral lipids. A significant amount of α-linolenic acid in the phospholipid fraction of L. migratoria was shown, while in T. molitor, phospholipids were the only fraction in which a measurable amount of docosahexaenoic acid was found. Overall, in most insects, the phospholipid fraction had the highest polyunsaturated fatty acid content compared to the other classes, which may be protective in terms of auto-oxidative stability. Kp values in the range of 4.17 to 6.43 were obtained. Within the nutritional quality indices, all insects showed healthy fatty acids and high-quality amino acid profiles.
RESUMO
This study focused on the extraction of polyphenols from applewood using ultrasonic-assisted extraction (UAE). First, the influence of solvent composition and mass-volume (m:v) ratio on the extraction yield was studied at a lab scale (200 mL). Overall, a ratio of 1:33 (m:v) resulted in a higher yield of polyphenols. Furthermore, both a higher yield of polyphenols and higher antioxidant capacity were detected in the extracts produced in the presence of a 30 v/v % ethanol mixture compared to pure water; a further increase in ethanol did not improve the extraction yield. Second, under the optimal conditions (30 v/v % ethanol-water; 1:33 and 1:20 (m:v)), the UAE technique was applied at a pilot scale (100 L). At 1:33 (m:v), the polyphenol yield was lower at the pilot scale compared to the lab scale; by contrast, at 1:20 (m:v), production at the pilot scale resulted in a higher yield compared to the lab scale. To identify and quantify individual polyphenols, HPLC-PDA analyses were performed. Phloridzin appears to be the major identified compound. Finally, the UAE process was compared to a conventional solid-liquid extraction technique, showing that a significantly higher yield could be obtained with UAE.
RESUMO
Despite their popularity, plant-based food gel systems (GS) sometimes have suboptimal texture compared to animal-based products. Therefore, 4 commercial plant proteins (from mung bean, pea, potato and soybean) and 2 commercial plant fats (sunflower oil and coconut fat) in 2 contents (7.5 wt% and 17.5 wt%) were evaluated towards their contribution to structure and physical stability a lean (LGS, no fat) and an emulsified GS (EGS). Generally, protein source had a larger effect on structure and physical stability than fat source and content. Unheated, GS with soybean protein showed most structure and highest physical stability. Heated till 94 °C, the structure of GS increased drastically, but EGS showed less structure than LGS, attributed to low solid fat contents (SFC), hence low rigidity, of the incorporated oil droplets at 94 °C. Cooled till 5 °C all GS showed an additional increase in structure, for GS with mung bean and pea protein accompanied with an increase in physical stability. Overall, EGS with sunflower oil showed less structure and lower stability than EGS with coconut fat, likely due to their different SFC. At 5 °C, Peak force of GS with potato protein was highest. Across protein sources, EGS displayed a higher Peak force with coconut fat than with sunflower oil, again likely due to different SFC, hence, rigidity of the oil droplets. Physical stability of GS did not vary significantly between protein sources, fat sources nor fat contents, after a freeze-thaw cycle, nor during prolonged cold storage.
RESUMO
Nitrate and nitrite salts perform a versatile role in fermented meats, including the inhibition of food pathogens (in particular proteolytic group I Clostridium botulinum). Despite the increasing interest in clean-label products, little is known about the behaviour of this pathogen in response to the removal of chemical preservatives from fermented meat formulations. Therefore, challenge tests with a cocktail of nontoxigenic group I C. botulinum strains were performed to produce nitrate/nitrite-free fermented sausages under different acidification conditions and starter culture formulations, including the use of an anticlostridial Mammaliicoccus sciuri strain. Results showed limited outgrowth of C. botulinum, even in the absence of acidification. The anticlostridial starter culture did not lead to an additional inhibitory effect. The selective plating procedure adopted within this study proofed robust to follow germination and growth of C. botulinum, inhibiting common fermentative meat microbiota. The challenge tests constitute a suitable tool to assess the behaviour of this food pathogen within fermented meats upon nitrate- and nitrite omission.
Assuntos
Clostridium botulinum , Produtos da Carne , Nitritos/farmacologia , Nitratos/farmacologia , FermentaçãoRESUMO
Insects and insect-based products have gained increasing interest as human food because of their many technological, nutritional and environmental advantages, but they are still rejected by many Western consumers. Analytical knowledge of flavour compounds could contribute to enhancing product attractiveness to consumers. Therefore, the goal of this study was to examine the volatile compound profiles of 7 unheated insects: Zophobas morio (ZM), Tenebrio molitor (TM), Locusta migratoria (LM), Galleria mellonella (GM), Blaptica dubia (BD), Alphitobius diaperinus (ALD) and Acheta domesticus (ACD). A total of 67 compounds were identified. Carboxylic acids were predominant in ALD, BD, GM, TM and ZM, while ketones were the major family in ACD and linear hydrocarbons in LM. ZM contained the highest number of unpleasant odour compounds, including indole, also present in BD and GM, which is characterised by a low detection threshold.
Assuntos
Besouros , Insetos Comestíveis , Locusta migratoria , Tenebrio , Animais , Humanos , Insetos , AlimentosRESUMO
Market demand for palatable plant-based meat alternatives is on the rise. One of the challenges is formulating products with sensorial characteristics similar to conventional meat. In this study, the effect of myoglobin on the aromatic profile of plant-based meat alternatives was assessed. Plant-based burgers were made with soy-textured protein, supplemented with three levels of myoglobin (0, 0.5 and 1.0%, the latter two mimicking endogenous myoglobin levels in meat), and grilled for 12 min at 250 °C. To evaluate the aromatic profile of the compounds, raw and grilled samples were subjected to headspace solid-phase microextraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS). Principal component analysis (PCA) analysis was then performed to visualize the interaction between grilling and myoglobin addition, and the effect exerted on the resulting aromatic profile. Myoglobin significantly affected several classes of volatile compounds, either by itself or in conjunction with grilling. A notable increase in aldehydes and a decrease in hydrocarbons were noted after adding myoglobin. As expected, an increase in pyrazines was observed after grilling. The results suggest myoglobin positively influences the aromatic profile of plant-based meat alternatives, contributing to a profile closer to the one of conventional meat.
RESUMO
The application potential of functional ingredients for the meat industry is often assessed through different measuring tools, thereby making comparisons difficult. The aim of this study was to create valuable information about the performance of functional ingredients based upon standardized and comparable data gathered through a newly developed screening tool. Therefore, 25 ingredients, selected from different techno-functional classes, were characterized at 2 different dosages by means of the screening methodology. The tool itself consisted of a lean meat model and fatty liver-based system, representative of the finely minced and/or emulsified charcuterie market. A total of 23 different parameters were measured through both model systems, providing information concerning water and fat binding capacity, emulsification, and texture and structure formation. Through cluster analysis, the ingredients were assigned to groups, each with their own specific properties. The screening tool provided good descriptive and distinctive power concerning ingredient functionalities and offers the industry a clear overview of their application characteristics.
RESUMO
The addition of phosphates to meat products improves the emulsifying and gelling properties of meat proteins, in turn enhancing overall product quality. The current market trend towards additive-free products and the health issues related to phosphate challenge the industry to develop phosphate-free meat products. The aim of this study was to evaluate the potential of seven protein-based ingredients (pea, blood plasma, gelatin, soy, whey, egg, and potato) to remediate quality losses of emulsified meat products (cooked sausages) upon phosphate elimination. First, the intrinsic gelling and emulsifying characteristics of the proteins were assessed. Next, the proteins were added to phosphate-free sausages, of which quality characteristics during production (viscoelastic behavior and emulsion stability) and of the final products (texture, cooking loss, and pH) were screened. Blood plasma and soy were superior in phosphate-free cooked sausages, as no significant differences in hardness, cooking yield, or stability were found compared to phosphate-containing sausages. Egg and pea also improved the previously mentioned quality characteristics of phosphate-free sausages, although to a lesser extent. These insights could not entirely be explained based on the intrinsic gelling and emulsifying capacity of the respective proteins. This indicated the importance of a well-defined standardized meat matrix to determine the potential of alternative proteins in meat products.
RESUMO
In order to better understand structure formation in hybrid meat products containing insects, viscoelastic properties, protein aggregation and surface hydrophobicity of extracted insect and meat proteins in different insect:meat nitrogen ratios (100:0, 75:25, 50:50, 25:75 and 0:100) at different heating temperatures (from 20 to 80 °C) were studied. During heating, meat proteins showed best gelling properties. This was probably associated with the formation of hydrophobic interactions, as was confirmed by the strong increase in surface hydrophobicity of the meat proteins upon heating. Insect proteins, on the other hand, formed a considerable amount of additional structure during cooling, resulting in gels with high gel strength, although their gel stability was low. As for the mixtures of insect and meat proteins, they showed lower final gel strengths compared to the pure insect and meat protein samples. Furthermore, proteins with molecular weights of 230 and 16 kDa, that aggregated in the pure samples, did not aggregate in the mixtures. Although the mechanism of the latter effect remains to be elucidated, it probably explains the lower gel strength observed in the protein mixtures.
Assuntos
Carne de Porco , Carne Vermelha , Animais , Calefação , Insetos , Carne , Carne Vermelha/análise , Suínos , TemperaturaRESUMO
Because of the need to abolish the castration of piglets without anaesthesia/analgesia, the pig industry is searching for a mode of action for the valorisation of meat with boar taint, an off-odour in entire male pigs. Carcasses with boar taint were selected by means of sensory and chemical analysis, after which patties with different levels of tainted boar meat were produced, as well as cooked ham and Frankfurter sausages using different smoke condensates and cooking temperatures. For these products orthonasal and retronasal boar taint odour were assessed by a trained expert panel. The results offer guidance regarding dilution of tainted meat (with <400 µg/kg androstenone if skatole is low or <200 µg/kg androstenone in concurrence with ≥37 µg/kg skatole) and the potential application of smoke condensates (e.g., Rudinsmoke C for sausages and Smokez LFBN for ham) as promising boar taint masking strategies.
Assuntos
Produtos da Carne/análise , Carne Vermelha/análise , Androstenos/análise , Animais , Culinária , Odorantes/análise , Escatol/análise , Fumaça , SuínosRESUMO
Cultured meat aspires to be biologically equivalent to traditional meat. If cultured meat is to be consumed, sensorial (texture, color, flavor) and nutritional characteristics are of utmost importance. This paper compares cultured meat to traditional meat from a tissue engineering and meat technological point of view, focusing on several molecular, technological and sensorial attributes. We outline the challenges and future steps to be taken for cultured meat to mimic traditional meat as closely as possible.
RESUMO
The effect of tumbling time (5 h30, 19 h and 26 h) and raw ham quality (superior, inferior or mixed quality) on the quality of polyphosphate-free cooked ham was investigated. The water holding capacity and total yield of the polyphosphate-free tumbled hams were dependent on both tumbling time and ham quality. Higher values of both parameters were obtained with an increase in tumbling time from 5 h30 to 19 h and with superior hams. The exudate after 19 h and 26 h tumbling showed a higher gel forming ability compared to 5 h30, which, in case of polyphosphate-free cooked hams produced with mixed and inferior meat quality, resulted in a better sliceability (less holes). However, tumbling time did not affect hardness, which was only influenced by ham quality, resulting in a softer polyphosphate-free cooked ham produced with inferior ham quality compared to the other quality classes.
Assuntos
Manipulação de Alimentos/métodos , Qualidade dos Alimentos , Produtos da Carne/análise , Animais , Culinária , Músculo Esquelético , Suínos , Fatores de Tempo , Água/químicaRESUMO
Since insects are a promising alternative protein source, the application potential of three insect larvae (Alphitobius diaperinus, Tenebrio molitor and Zophobas morio) for food purposes was explored. To this end, the effect of isothermal heating at 5 different temperatures (70⯰C-90⯰C) on structure formation in insect batters was studied rheologically. Meat batters (with the same protein content as insect batters), isothermally heated at 70⯰C, were also studied for comparison. Cryo-SEM imaging was used to visualize the microstructure of raw and heated insect batters. These images showed that a network was formed in the heated batters, as well as in the raw batters. However, no clear effect of temperature or insect larva on the microstructure was observed. Rheologically, both the heating temperature applied and the insect larva used were shown to have a significant effect on the viscoelastic properties of the insect batters. Generally, batters containing Z. morio larvae showed both higher storage moduli (G') and longer linear viscoelastic regions (LVRs) compared to the other insect larvae, indicating that these larvae had the best structure forming capacities. Furthermore, both G' and the length of the LVR increased with increasing isothermal heating temperature, indicating more structure formation and structure stability in insect batters heated at higher temperatures. Compared to the meat batters, however, the insect larvae were shown to have inferior structure forming capacities. Even at the highest heating temperature (90⯰C) the viscoelastic properties of the insect batters only approached those of meat batters heated at 70⯰C. Therefore, it was concluded that higher heating temperatures may need to be employed in insect-based food products compared to meat products in order to obtain sufficient structure formation and the desired textural properties.
Assuntos
Temperatura Alta , Insetos/metabolismo , Animais , Besouros/metabolismo , Proteínas Alimentares/metabolismo , Proteínas de Insetos/metabolismo , Larva/metabolismo , Reologia , Tenebrio/metabolismoRESUMO
The aim of this research was to simultaneously study the effect of meat type (chicken breast and leg meat), animal fatty acid composition (selected pork backfats having a low and high degree of saturation, respectively), and isothermal temperature (50, 60, 70, and 80 °C) on the viscoelastic properties of meat batters during and after application of different time-temperature profiles. Gelation of meat proteins contributed most to the viscoelastic properties of meat batters during heating, whereas crystallization of the lipids especially contributed to the viscoelastic properties during the cooling phase. Although the meat type had little effect on the final viscoelastic properties of the meat product, the fatty acid composition had a clear impact on the melting peak area (and therefore solid fat content) of lard, and subsequently on the final viscoelastic properties of meat batters prepared with different types of fats, with higher G' (elastic modulus) values for the most saturated animal fat. The crystallization of the fat clearly transcended the effect of the meat type with regard to G' at the end of the process. With increasing (isothermal) temperature, G' of meat batters increased. Therefore, it could be concluded that the structural properties of heated meat batters mainly depend on the heating temperature and the fatty acid composition, rather than the meat type. PRACTICAL APPLICATION: Quality characteristics of cooked sausages depend on multiple factors such as the meat and fat type, non-meat ingredients and processing conditions. From this study it could be concluded that the structural properties of cooked sausage batters mainly depend on the heating temperature and the fatty acid composition, rather than the meat type. Because the fatty acid composition of different animal fats differs widely, these results may be a concern for all manufactures of cooked sausages products with regard to the product structure and final texture, keeping in mind that rendered fat was used in this study, which is not common in sausage making.
Assuntos
Ácidos Graxos/análise , Análise de Alimentos , Produtos da Carne/análise , Temperatura , Substâncias Viscoelásticas/química , Animais , Varredura Diferencial de Calorimetria , Culinária , Gorduras na Dieta/análise , Proteínas Alimentares/análise , Géis/química , Concentração de Íons de Hidrogênio , Aves Domésticas , Carne Vermelha/análise , SuínosRESUMO
The effectiveness of predictive microbiology is limited by the lack of knowledge concerning the influence of food microstructure on microbial dynamics. Therefore, future modelling attempts should be based on experiments in structured food model systems as well as liquid systems. In this study, fish-based model systems with various microstructures were developed, i.e., two liquid systems (with and without xanthan gum), an emulsion, an aqueous gel, and a gelled emulsion. The microstructural effect was isolated by minimising compositional and physico-chemical changes among the different model systems. The systems were suitable for common growth and mild thermal inactivation experiments involving both homogeneous and surface inoculation. Average pH of the model systems was 6.36±0.03 and average aw was 0.988±0.002. The liquid system without xanthan gum behaved like a Newtonian fluid, while the emulsion and the liquid containing xanthan gum exhibited (non-Newtonian) pseudo-plastic behaviour. Both the aqueous gel and gelled emulsion were classified as strong gels, with a hardness of 1.35±0.07N and 1.25±0.05N, respectively. Fat droplet size of the emulsion and gelled emulsion model systems was evenly distributed around 1µm. In general, the set of model systems was proven to be suitable to study the influence of important aspects of food microstructure on microbial dynamics.
Assuntos
Modelos Biológicos , Alimentos Marinhos/análise , Alimentos Marinhos/microbiologia , Animais , Peixes , Microbiologia de Alimentos , Géis , Concentração de Íons de Hidrogênio , Polissacarídeos BacterianosRESUMO
Nitrite is commonly used in meat products due to its plural technological advantages. However, it is controversial because of its detrimental side effects on health. Within the context of nitrite reduction, zinc protoporphyrin IX (Zn(II)PPIX) formation in meat products as natural red colouring agent has been suggested. This investigation presents the evaluation of naturally occurring pigments, namely Zn(II)PPIX, protoporphyrin IX (PPIX) and heme in nitrite-free dry fermented sausages in function of time, meat source (pork, horsemeat and a combination of both meat sources) and pH condition. In function of time, Zn(II)PPIX and PPIX were formed and heme content decreased. Higher pH conditions promoted Zn(II)PPIX and PPIX formation, whereas the influence of pH on heme was less clear. The use of horsemeat also promoted Zn(II)PPIX formation. Moreover, even similar amounts were formed when it was combined with pork. Product redness, however, could not be related to Zn(II)PPIX formation.
Assuntos
Cor , Heme/metabolismo , Produtos da Carne/análise , Protoporfirinas/biossíntese , Animais , Fermentação , Manipulação de Alimentos/métodos , Microbiologia de Alimentos , Cavalos , Concentração de Íons de Hidrogênio , Produtos da Carne/microbiologia , Suínos , Fatores de TempoRESUMO
Phosphate reduction is of important industrial relevance in the manufacturing of emulsified meat products because it may give rise to a healthier product. The effect of seven different phosphate types was tested on the physicochemical and quality characteristics to select the most promising phosphate type for further cooked sausage manufacturing. Next, phosphate mass fraction was gradually reduced. Tetrasodium di- or pyrophosphate (TSPP) and sodium tripolyphosphate (STPP) increased pH, reduced structural properties, resulted in the highest emulsion stability, lowest cooking loss and had little effect on hardness. Based on the viscoelastic properties, a minimum mass fraction of 0.06% TSPP was sufficient to obtain an acceptable quality product. Rheology proved to be a very useful tool to evaluate the quality of meat products, as it gives insight in the structure of the meat product and especially the functional properties of meat proteins. Based on the obtained results, it can be concluded that the current amount of phosphate added to emulsified meat products can be significantly reduced with minimal loss of product quality.
RESUMO
Meat products can be contaminated with carcinogenic N-nitrosamines, which is ascribed to the reaction between a nitrosating agent, originating from nitrite or smoke, and a secondary amine, derived from protein and lipid degradation. Although in model systems it is demonstrated that many amine containing compounds can be converted to N-nitrosamines, the yield is dependent of reaction conditions (e.g., low pH and high temperature). In this article, the influence of the composition of the meat products (e.g., pH, aw, spices) and processing (e.g., ageing, ripening, fermentation, smoking, heat treatment and storage) on the presence and availability of the amine precursors and the N-nitrosamine formation mechanism is discussed. In addition, this article explores the current N-nitrosamine mitigation strategies in order to obtain healthier and more natural meat products.
Assuntos
Manipulação de Alimentos/métodos , Produtos da Carne/análise , Nitrosaminas/análise , Aminas , Contaminação de Alimentos/análise , Humanos , Carne/análise , Produtos da Carne/normas , NitritosRESUMO
The aim of this work was to study thermal inactivation kinetics of Listeria monocytogenes on vacuum-packaged food surfaces. The kinetics were first determined on model agar systems (BHI agar plates), mimicking cooked meat products, which have the same characteristics (pH, sodium chloride (NaCl) or sodium lactate (NaL) content and thickness) as the cooked meat products. Then, in order to validate how well the thermal inactivation on the model agar system simulated inactivation on real products, inactivation kinetics of L. monocytogenes on slices of cooked ham and cooked sausage were examined. BHI agar plates (pH6.2 or 7.2) were prepared with and without the addition of 3% NaCl or NaL. They were initially inoculated with approximately 109CFU/plate culture, aseptically packaged in linear low-density polyethylene pouches, and vacuum-sealed. Thermal treatments were performed by submerging packages in a water bath maintained at 60°C. For most of the conditions studied, the inactivation curves were linear; shoulders were only observed for curves at conditions of pH6.2 with 3.0% NaL. The t4D values (time needed to obtain an inactivation of four-log reduction) were calculated based on the best fitting models included in GInaFit. The observed t4D values for L. monocytogenes on agar surfaces ranged from 6.8 (pH6.2) to 13.7min (pH7.2 with 3.0% NaCl). At pH6.2 addition of NaCl or NaL significantly increased the heat resistance of L. monocytogenes while at pH7.2 this effect was not significant. NaL seemed to affect the heat resistance to the same extent as NaCl. Inactivation curves of L. monocytogenes on slices of cooked ham at pH6.2 with or without addition of NaCl or NaL appeared to be log-linear in shape. However, the curves obtained from cooked sausages were markedly concave and the Weibull model was used for fitting. Concerning heat resistance of L. monocytogenes on meat products, t4D values increased approximately two-fold compared to those corresponding on model agar surfaces. The addition of 3.0% NaCl and NaL in cooked ham increased t4D values of L. monocytogenes from 11.8 to 24.9min and 24.3min, respectively. Similar effects were observed on cooked sausage. Survival on the cooked sausage, containing about 33% of fat, was not significantly different from that on cooked ham. Meanwhile, the addition of NaCl or NaL decreased the average proportions of injured cells substantially. The results of this study can be used by food processors to validate thermal processes with regard to the expected inactivation of L. monocytogenes post-contaminating meat product surfaces.
RESUMO
This study investigates the potential of producing red coloured dry fermented sausages without the addition of nitrite and/or nitrate. Therefore, the formation of zinc protoporphyrin IX (Zn(II)PPIX) as naturally occurring pigment, and the interrelated protoporphyrin IX (PPIX) and heme content were evaluated during nitrite-free dry fermented sausage production at different pH conditions. Zn(II)PPIX was only able to form in dry fermented sausages at pH conditions higher than approximately 4.9. Additionally, the presence of Zn(II)PPIX increased drastically at the later phase of the production process (up to day 177), confirming that in addition to pH, time is also a crucial factor for its formation. Similarly, PPIX also accumulated in the meat products at increased pH conditions and production times. In contrast, a breakdown of heme was observed. This breakdown was more gradual and independent of pH and showed no clear relationship with the formed amounts of Zn(II)PPIX and PPIX. A statistically significant relationship between Zn(II)PPIX formation and product redness was established.