Antibacterial properties of photo-crosslinked chitosan/methacrylated hyaluronic acid nanoparticles loaded with bacitracin.

The current treatments for wounds often fail to induce adequate healing, leaving wounds vulnerable to persistent infections and development of drug-resistant microbial biofilms. New natural-derived nanoparticles were studied to impair bacteria colonization and hinder the formation of biofilms in wounds. The nanoparticles were fabricated through polyelectrolyte complexation of chitosan (CS, polycation) and hyaluronic acid (HA, polyanion). UV-induced photo-crosslinking was used to enhance the stability of the nanoparticles. To achieve this, HA was methacrylated (HAMA, degree of modification of 20 %). Photo-crosslinked nanoparticles obtained from HAMA and CS had a diameter of 478 nm and a more homogeneous size distribution than nanoparticles assembled solely through complexation (742 nm). The nanoparticles were loaded with the antimicrobial agent bacitracin (BC), resulting in nanoparticles with a diameter of 332 nm. The encapsulation of BC was highly efficient (97 %). The BC-loaded nanoparticles showed significant antibacterial activity against gram-positive bacteria Staphylococcus aureus, Methicillin-resistant S. aureus and S. epidermidis. Photo-crosslinked HAMA/CS nanoparticles loaded with BC demonstrated inhibition of biofilm formation and a positive effect on the proliferation of mammalian cells (L929). These crosslinked nanoparticles have potential for the long-term treatment of wounds and controlled antibiotic delivery at the location of a lesion.

Hydroxyapatite/alginate/gellan gum inks with osteoconduction and osteogenic potential for bioprinting bone tissue analogues.

There is a growing demand for engineered bone tissues custom-designed to match the patient-specific defect size and in vitro models for studying bone diseases and/or drug screening. Herein, we propose a bioprinted bone tissue construct using SaOs-2 cells within alginate/gellan gum/hydroxyapatite inks. Different ink formulations were developed with varying hydroxyapatite content and then evaluated for viscoelasticity, printability, biomineralization properties, post-printing viability, proliferation, metabolic activity, and osteogenic phenotype of SaOs-2-encapsulated cells. Results indicate that ink formulations exhibit non-Newtonian shear-thinning behaviour, maintaining shape integrity and structural stability post-printing. Ink mineralization rates increase with the hydroxyapatite content, rendering them suitable for bone defect strategies. Post-printed cells in the developed constructs remain live, spreading, and metabolically active but do not proliferate. Osteogenic gene and protein expression, both early and late, show upregulation at day 7 relative to day 1, followed by downregulation at day 14. Lower hydroxyapatite content inks demonstrate up to fourfold upregulation in genes and proteins at most time points. Additionally, these constructs release calcium and phosphate at levels conducive to mineralization. Overall, the tissue-engineered miniaturized constructs not only meet the criteria for early-stage bone defect/fracture regeneration but also serve as a promising platform for drug screening and evaluating potential therapeutic treatments.

Untangling the biological and inflammatory behavior of silk-like sutures In vivo.

Recombinant spider silk materials with antimicrobial peptides are a promising new class of drug-free antimicrobial materials capable of preventing surgical site infections (SSI), but their potential to impede infections is unclear. Herein, we aimed to unravel the biological and inflammatory potential of bioengineered spider silk materials to prevent SSI using an infection animal model. Silk-like fibers made of silk fibroin and spider silk proteins with antimicrobial peptides (6mer-HNP1) held improved stiffness (2.9 GPa) and had a slow biodegradation profile while inhibiting bacterial adherence in vitro by 5-log and 6-log reduction on Methicillin-Resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli), respectively. In vivo studies showed that fibers with 6mer-HNP1 elicited a short-term low to mild local inflammatory response, similar to implanted commercial sutures. In the presence of a bacterial infection, the mediators related to infection and inflammation were downregulated suggesting that the fibers maintained a low but active response to bacterial infection. Thus, the presence of 6mer-HNP1 helped the host maintain an active response to bacterial infection, impairing the development of an acute infection. Our findings further support the use of bioengineered spider silk proteins to develop drug-free antimicrobial sutures capable to impair SSI.

Development and Characterization of Highly Stable Silver NanoParticles as Novel Potential Antimicrobial Agents for Wound Healing Hydrogels.

Recurrent microbial infections are a major cause of surgical failure and morbidity. Wound healing strategies based on hydrogels have been proposed to provide at once a barrier against pathogen microbial colonization, as well as a favorable environment for tissue repair. Nevertheless, most biocompatible hydrogel materials are more bacteriostatic than antimicrobial materials, and lack specific action against pathogens. Silver-loaded polymeric nanocomposites have efficient and selective activity against pathogenic organisms exploitable for wound healing. However, the loading of metallic nanostructures into hydrogels represents a major challenge due to the low stability of metal colloids in aqueous environments. In this context, the aim of the present study was the development of highly stable silver nanoparticles (AgNPs) as novel potential antimicrobial agents for hyaluronic acids hydrogels. Two candidate stabilizing agents obtained from natural and renewable sources, namely cellulose nanocrystals and ulvan polysaccharide, were exploited to ensure high stability of the silver colloid. Both stabilizing agents possess inherent bioactivity and biocompatibility, as well as the ability to stabilize metal nanostructures thanks to their supramolecular structures. Silver nitrate reduction through sodium borohydride in presence of the selected stabilizing agents was adopted as a model strategy to achieve AgNPs with narrow size distribution. Optimized AgNPs stabilized with the two investigated polysaccharides demonstrated high stability in phosphate buffer saline solution and strong antimicrobial activity. Loading of the developed AgNPs into photocrosslinked methacrylated hyaluronic acid hydrogels was also investigated for the first time as an effective strategy to develop novel antimicrobial wound dressing materials.

Chitosan/ß-TCP composites scaffolds coated with silk fibroin: a bone tissue engineering approach.

Bone regeneration and natural repair are long-standing processes that can lead to uneven new tissue growth. By introducing scaffolds that can be autografts and/or allografts, tissue engineering provides new approaches to manage the major burdens involved in this process. Polymeric scaffolds allow the incorporation of bioactive agents that improve their biological and mechanical performance, making them suitable materials for bone regeneration solutions. The present work aimed to create chitosan/beta-tricalcium phosphate-based scaffolds coated with silk fibroin and evaluate their potential for bone tissue engineering. Results showed that the obtained scaffolds have porosities up to 86%, interconnectivity up to 96%, pore sizes in the range of 60-170 µm, and a stiffness ranging from 1 to 2 MPa. Furthermore, when cultured with MC3T3 cells, the scaffolds were able to form apatite crystals after 21 d; and they were able to support cell growth and proliferation up to 14 d of culture. Besides, cellular proliferation was higher on the scaffolds coated with silk. These outcomes further demonstrate that the developed structures are suitable candidates to enhance bone tissue engineering.

An Overview of the Antimicrobial Properties of Lignocellulosic Materials.

Pathogenic microbes are a major source of health and environmental problems, mostly due to their easy proliferation on most surfaces. Currently, new classes of antimicrobial agents are under development to prevent microbial adhesion and biofilm formation. However, they are mostly from synthetic origin and present several disadvantages. The use of natural biopolymers such as cellulose, hemicellulose, and lignin, derived from lignocellulosic materials as antimicrobial agents has a promising potential. Lignocellulosic materials are one of the most abundant natural materials from renewable sources, and they present attractive characteristics, such as low density and biodegradability, are low-cost, high availability, and environmentally friendly. This review aims to provide new insights into the current usage and potential of lignocellulosic materials (biopolymer and fibers) as antimicrobial materials, highlighting their future application as a novel drug-free antimicrobial polymer.

A Graded, Porous Composite of Natural Biopolymers and Octacalcium Phosphate Guides Osteochondral Differentiation of Stem Cells.

Lesions involving the osteochondral unit are difficult to treat. Biomimetic scaffolds are previously shown as promising alternative. Such devices often lack multiple functional layers that mimic bone, cartilage, and the interface. In this study, multilayered scaffolds are developed based on the use of natural extracellular matrix (ECM)-like biopolymers. Particular attention is paid to obtain a complex matrix that mimics the native osteochondral transition. Porous, sponge-like chitosan-collagen-octacalcium phosphate (OCP) scaffolds are obtained. Collagen content increases while the amount of OCP particles decreases toward the cartilage layer. The scaffolds are bioactive as a mineral layer is deposited containing hydroxyapatite at the bony side. The scaffolds stimulate proliferation of human adipose-derived mesenchymal stem cells, but the degree of proliferation depends on the cell seeding density. The scaffolds give rise to a zone-specific gene expression. RUNX2, COL1A1, BGLAP, and SPP1 are upregulated in the bony layer of the scaffold. SOX9 is upregulated concomitant with COL2A1 expression in the cartilage zone. Mineralization in presence of the cells is prominent in the bone area with Ca and P steadily increasing over time. These results are encouraging for the fabrication of biomimetic scaffolds using ECM-like materials and featuring gradients that mimic native tissues and their interface.

Antimicrobial coating of spider silk to prevent bacterial attachment on silk surgical sutures.

Microbial infections from post-surgery or other medical-related procedure is a serious health problem. Nowadays, the research is focused on the development of new drug-free materials with antibacterial properties to prevent or minimize the risk of infections. Spider silk is known for its unique biomechanical properties allied with biocompatibility. Recombinant DNA technology allows to bioengineering spider silk with antimicrobial peptides (AMP). Thus, our goal was to bioengineered spider silk proteins with AMP (6mer-HNP1) as an antibacterial drug-free coating for commercial silk sutures (Perma-Hand®) for decreasing bacterial infections. Perma-Hand® sutures were coated with 6mer-HNP1 by dip coating. In vitro tests, using human fetal lung fibroblasts (MRC5), showed that coated sutures sustained cell viability, and also, the contact with red blood cells (RBCs) demonstrate blood compatibility. Also, the coatings inhibited significantly the adherence and formation of biofilm, where sutures coated with 6mer-HNP1 produced a 1.5 log reduction of Methicillin-Resistant Staphylococcus aureus (MRSA) and a 2 log reduction of Escherichia coli (E. coli) compared to the uncoated Perma-Hand® suture. The mechanical properties of Perma-Hand® sutures were not affected by the presence of bioengineered spider silk proteins. Thus, the present work demonstrated that using spider silk drug-free coatings it is possible to improve the antibacterial properties of the commercial sutures. Furthermore, a new class of drug-free sutures for reducing post-implantation infections can be developed. STATEMENT OF SIGNIFICANCE: Microbial infections from post-surgery or other medical-related procedure is a serious health problem. Developing new drug-free materials with antibacterial properties is an approach to prevent or minimize the risk of infections. Spider silk is known for its unique biomechanical properties allied with biocompatibility. Recombinant DNA technology allow to bioengineering spider silk with antimicrobial peptides (AMP). Our goal is bioengineered spider silk proteins with AMP as an antibacterial coating for silk sutures. The coatings showed exceptional antibacterial properties and maintained intrinsic mechanical features. In vitro studies showed a positive effect of the coated sutures on the cell behavior. With this new drug-free bioengineered spider silk coating is possible to develop a new class of drug-free sutures for reducing post-implantation infections.

Silk-Based Antimicrobial Polymers as a New Platform to Design Drug-Free Materials to Impede Microbial Infections.

Surgical site infections (SSI) represent a serious health problem that occur after invasive surgery, thus new antimicrobial biomaterials able to prevent SSI are needed. Silks are natural biopolymers with excellent biocompatibility, low immunogenicity and controllable biodegradability. Spider silk-based materials can be bioengineered and functionalized with specific peptides, such as antimicrobial peptides, creating innovative polymers. Herein, we explored new drug-free multifunctional silk films with antimicrobial properties, specifically tailored to hamper microbial infections. Different spider silk domains derived from the dragline sequence of the spider Nephila clavipes (6mer and 15mer, 27 and 41 kDa proteins, respectively) were fused with the two antimicrobial peptides, Hepcidin (Hep) and Human Neutrophil peptide 1 (HNP1). The self-assembly features of the spider silk domains (ß-sheets) were maintained after functionalization. The bioengineered 6mer-HNP1 protein demonstrated inhibitory effects against microbial pathogens. Silk-based films with 6mer-HNP1 and different contents of silk fibroin (SF) significantly reduced bacterial adhesion and biofilm formation, whereas higher bacterial counts were found on the films prepared with 6mer or SF alone. The silk-based films showed no cytotoxic effects on human foreskin fibroblasts. The positive cellular response, together with structural and antimicrobial properties, highlight the potential of these multifunctional silk-based films as new materials for preventing SSI.

Fish sarcoplasmic proteins as a high value marine material for wound dressing applications.

Fish sarcoplasmic proteins (FSP) constitute around 25-30% of the total fish muscle protein. As the FSP are water soluble, FSP were isolated from fresh cod (Gadus morhua) by centrifugation. By SDS-PAGE, it was possible to determine the composition of FSP extracts (FSP-E). The FSP-E undergo denaturation at 44.12 ±â€¯2.34°â€¯C, as characterized by differential scanning calorimetry thermograms (DSC). The secondary structure of FSP-E is mainly composed by α-helix structure, as determined by circular dichroism. The cytocompatibility of FSP-E, at concentrations ranging from 5 to 20 mg/mL, was investigated. Concentrations lower than 10 mg/mL have no cytotoxicity cultures of fibroblasts over 72 h. Further on, FSP membranes (FSP-M) were produced by spin coating to evaluate its properties. FSP-M shown having uniform surface as analyzed by Scanning Electron Microscopy (SEM). The relative amount of α-helix structures is higher when compared with the FSP-E. The FSP-M have higher temperature stability than the FSP-E, since they presented a denaturation temperature of 58.88 ±â€¯3.36°â€¯C, according to the DSC analysis. FSP-M shown distinctive mechanical properties, with a stiffness of 16.57 ±â€¯3.95 MPa and a yield strength of 23.85 ±â€¯5.97 MPa. Human lung fibroblasts cell lines (MRC-5) were cultured in direct contact with FSP-M, demonstrating its cytocompatibility for 48 h. Based on these results, FSP can be considered a potential biomaterial recovered from nature, for wound dressing applications.

The effects of platelet lysate patches on the activity of tendon-derived cells.

Platelet-derived biomaterials are widely explored as cost-effective sources of therapeutic factors, holding a strong potential for endogenous regenerative medicine. Particularly for tendon repair, treatment approaches that shift the injury environment are explored to accelerate tendon regeneration. Herein, genipin-crosslinked platelet lysate (PL) patches are proposed for the delivery of human-derived therapeutic factors in patch augmentation strategies aiming at tendon repair. Developed PL patches exhibited a controlled release profile of PL proteins, including bFGF and PDGF-BB. Additionally, PL patches exhibited an antibacterial effect by preventing the adhesion, proliferation and biofilm formation by S. aureus, a common pathogen in orthopaedic surgical site infections. Furthermore, these patches supported the activity of human tendon-derived cells (hTDCs). Cells were able to proliferate over time and an up-regulation of tenogenic genes (SCX, COL1A1 and TNC) was observed, suggesting that PL patches may modify the behavior of hTDCs. Accordingly, hTDCs deposited tendon-related extracellular matrix proteins, namely collagen type I and tenascin C. In summary, PL patches can act as a reservoir of biomolecules derived from PL and support the activity of native tendon cells, being proposed as bioinstructive patches for tendon regeneration. STATEMENT OF SIGNIFICANCE: Platelet-derived biomaterials hold great interest for the delivery of therapeutic factors for applications in endogenous regenerative medicine. In the particular case of tendon repair, patch augmentation strategies aiming at shifting the injury environment are explored to improve tendon regeneration. In this study, PL patches were developed with remarkable features, including the controlled release of growth factors and antibacterial efficacy. Remarkably, PL patches supported the activity of native tendon cells by up-regulating tenogenic genes and enabling the deposition of ECM proteins. This patch holds great potential towards simultaneously reducing post-implantation surgical site infections and promoting tendon regeneration for prospective in vivo applications.

Engineering magnetically responsive tropoelastin spongy-like hydrogels for soft tissue regeneration.

Magnetic biomaterials are a key focus in medical research. Tropoelastin is the soluble precursor of elastin and is a critical component of tissues requiring elasticity as part of their physiological function. By utilising the versatility of tropoelastin and the ability to tailor its properties, we developed a novel magnetic spongy-like hydrogel based on tropoelastin doped with magnetic properties by in situ precipitation method. The presence of magnetic nanoparticles altered the secondary structure of tropoelastin. Bioengineered tropoelastin-based magnetic spongy-like hydrogels displayed a homogenous distribution of magnetic nanoparticles throughout the tropoelastin network and quick magnetic responsiveness to an applied external magnetic field. Morphologically, in the presence of magnetic nanoparticles, hydrated tropoelastin spongy-like hydrogels showed apparently smaller pore sizes and less swelling. Furthermore, in vitro biological studies using human tendon-derived cells revealed that magnetically responsive tropoelastin spongy-like hydrogels supported cell viability and enabled cell adhesion, spreading and migration into the interior of the spongy-like hydrogel up to two weeks. The bioengineered tropoelastin-based magnetic spongy-like hydrogel represents a novel class of hybrid biomaterial that can serve as a platform for soft tissue regeneration.

Platelet Lysate-Loaded Photocrosslinkable Hyaluronic Acid Hydrogels for Periodontal Endogenous Regenerative Technology.

The integrity and function of the periodontium can be compromised by traumatic injuries or periodontitis. Currently available clinical therapies are able to stop the progression of periodontitis and allow the healing of periodontal tissue. However, an optimal strategy capable of restoring the anatomy and functionality of the lost periodontal tissue is still to be achieved. Herein is proposed the development of an injectable hydrogel system able to release a growth factors and cells to the periodontal defect. This injectable system is based on a photocrosslinkable hydrogel, prepared from methacrylated hyaluronic acid (me-HA) and incorporating platelet lysate (PL). The delivery of growth factors and cells in situ is expected to enhance regeneration of the periodontium. Various formulations of me-HA containing increasing PL concentrations were studied for achieving the formation of stable photocrosslinkable hydrogels. The produced hydrogels were subsequently characterized to assess mechanical properties, degradation, protein/growth factor release profile, antimicrobial activity and response toward human Periodontal Ligament fibroblasts (hPDLFs). The results demonstrated that it was possible to obtain stable photocrosslinkable hydrogels incorporating different amounts of PL that can be released in a sustained manner. Furthermore, the incorporation of PL improved (p < 0.02) the viscoelastic properties of the hydrogels and enhanced their resilience to the degradation by hyaluronidase (HAase). Additionally, the PL was shown to provide antimicrobial properties. Finally, hPDLFs, either seeded or encapsulated into the developed hydrogels, showed enhanced proliferation over time (p < 0.05), proportionally to the increasing amounts of PL present in the hydrogel formulations.

Unveiling the effect of three-dimensional bioactive fibre mesh scaffolds functionalized with silanol groups on bacteria growth.

The need to replace or repair deteriorating bones and simultaneously prevent the formation of bacteria biofilm without impairing local tissue integration has pushed scientists to look for new designs and processing methods to develop innovative biomaterials. Silicon-based biomaterials, widely studied for application in bone regeneration, have demonstrated antibacterial properties. Herein, the aim of this work is to investigate the potential of the functionalization of biomaterials surfaces with silanol groups to prevent the bacterial biofilm formation. For that, we evaluated the adherence and biofilm formation of Escherichia coli (E. coli, Gram negative) and Staphylococcus aureus (S. aureus, Gram positive) on starch-based scaffolds. Three-dimensional fibre meshes scaffolds were developed by wet-spinning and functionalized with silanol (Si-OH) groups using a calcium silicate solution as a nonsolvent. The functionalization of the scaffolds was confirmed by X-ray photoelectron spectroscopy. The developed scaffolds showed no biocide activity against the bacterial tested, although the colony-forming units (CFU) mL(-1) counts were significant lower between 4 and 12 h of incubation for both bacteria. The adherence of E. coli and S. aureus to the scaffolds was also investigated. After a growth period of 12 h, the SPCL scaffolds functionalized with Si-OH groups showed a reduced bacterial adherence of E. coli and S. aureus. The functionalized scaffolds showed a positive effect in preventing the formation of biofilm in the case of S. aureus, however, in the case of E. coli this was not observed, suggesting that silanol groups may only have a positive effect in preventing the proliferation of gram-positive bacteria. The in vitro biological assessment of the functionalized materials showed that these materials sustained cell proliferation and induced their osteogenic differentiation. The outcome of this work suggests that the presence of Si-OH groups in SPCL scaffolds maintained bactericidal activity against S. aureus. Further research is still needed in order to understand the full antibacterial potential of Si-OH groups. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2189-2199, 2016.

Effect of benfluralin on Pinus pinea seedlings mycorrhized with Pisolithus tinctorius and Suillus bellinii--study of plant antioxidant response.

In this study, Pinus pinea seedlings mycorrhized with selected ectomycorrhizal fungi (ECMF), Pisolithus tinctorius and Suillus bellinii, were exposed to the herbicide benfluralin. Non-mycorrhized P. pinea seedlings and seedlings mycorrhized with ECMF were transferred to benfluralin-spiked soils at levels of 0.165, 1.65 and 16.5 mg kg(-1). Plant growth and the fungal role on plant antioxidant response were assessed. In the presence of benfluralin, higher plant growth was observed in mycorrhized plants compared to non-mycorrhized plants, but ECMF colonisation and nutrient uptake were affected by the herbicide. Benfluralin showed no effect on lipid peroxidation in P. pinea seedlings. However, seedlings mycorrhized with S. bellinii showed higher levels of lipid peroxidation when compared to non-mycorrhized ones, both in the presence and absence of benfluralin. The increase of lipid peroxidation could be related to seedling growth induced by the fungus and not to benfluralin toxicity. A similar trend was observed in seedlings mycorrhized with P. tinctorius when exposed to higher benfluralin concentrations, suggesting that the antioxidant response to benfluralin is related not only to fungus species, but also to the level of stress applied in the soil. The higher amount of superoxide dismutase activity in P. pinea seedlings tissues exposed to benfluralin could indicate a plant adaptative response to benfluralin toxicity. Catalase activity showed no increase with benfluralin exposure. Pre-established P. tinctorius mycorrhization conferred root protection and enhanced plant growth in benfluralin spiked soil, inferring that P. tinctorius - P. pinea association could advantageous for plant growth in soils contaminated with pesticides.

Co-metabolic degradation of mono-fluorophenols by the ectomycorrhizal fungi Pisolithus tinctorius.

The release of fluorinated organic compounds from fire retardants or agrochemical products may have a significant negative effect on soil ecosystems. In this study, the ability of Pisolithus tinctorius to tolerate and degrade mono-fluorophenols (FP) was assessed. In vitro studies showed fungal growth in the presence of 0.45mM of 2-FP and 3-FP, but not in the presence of 4-FP. P. tinctorius was able to degrade up to 79% and 92% of 1mM 2-FP and 3-FP, respectively, in glucose supplemented liquid medium, suggesting that 2- and 3-FP degradation occurred in co-metabolism with glucose consumption. 3-Fluorocatechol (FC) and 4-FC were identified as metabolic intermediates using HPLC and LC-MS. Liberation of fluoride was not detected suggesting that a fluorinated dead-end product was formed. In extracts of cells collected at the end of cultures supplemented with the mono-FPs, a metabolic intermediate compatible with a mass corresponding to a fluoromuconate compound, according to LC-MS data, was recovered. The results further suggest that ectomycorrhizal fungi may be able to degrade mono-FP in pure culture while using glucose as a carbon source, through a similar pathway as that found in bacteria. To our knowledge, this is the first time that degradation of mono-FPs by an ectomycorrhizal fungus is reported.

Diversity and persistence of ectomycorrhizal fungi and their effect on nursery-inoculated Pinus pinaster in a post-fire plantation in Northern Portugal.

Ectomycorrhizal fungi (ECMF) play an important role in forest ecosystems, often mitigating stress factors and increasing seedling performance. The aim of this study was to investigate the effects of a nursery inoculation on Pinus pinaster growth and on the fungal communities established when reforesting burned areas. Inoculated P. pinaster saplings showed 1.5-fold higher stem height than the non-inoculated controls after a 5 year growth period, suggesting that fungal inoculation could potentiate tree growth in the field. Ordination analysis revealed the presence of different ECMF communities on both plots. Among the nursery-inoculated fungi, Laccaria sp., Rhizopogon sp., Suillus bovinus and Pisolithus sp. were detected on inoculated Pinus saplings on both sampling periods, indicating that they persisted after field establishment. Other fungi were also detected in the inoculated plants. Phialocephala sp. was found on the first assessment, while Terfezia sp. was detected on both sampling periods. Laccaria sp. and Rhizopogon sp. were identified in the control saplings, belonging however to different species than those found in the inoculated plot. Inocybe sp., Thelephora sp. and Paxillus involutus were present on both sampling periods in the non-inoculated plots. The results suggest that ECMF inoculation at nursery stage can benefit plant growth after transplantation to a post-fire site and that the inoculated fungi can persist in the field. This approach has great potential as a biotechnological tool to aid in the reforestation of burned areas.

Phytomanagement of Cd-contaminated soils using maize (Zea mays L.) assisted by plant growth-promoting rhizobacteria.

Zea mays (L.) is a crop widely cultivated throughout the world and can be considered suitable for phytomanagement due to its metal resistance and energetic value. In this study, the effect of two plant growth-promoting rhizobacteria, Ralstonia eutropha and Chryseobacterium humi, on growth and metal uptake of Z. mays plants in soils contaminated with up to 30 mg Cd kg(-1) was evaluated. Bacterial inoculation increased plant biomass up to 63% and led to a decrease of up to 81% in Cd shoot levels (4-88 mg Cd kg(-1)) and to an increase of up to 186% in accumulation in the roots (52-134 mg Cd kg(-1)). The rhizosphere community structure changed throughout the experiment and varied with different levels of Cd soil contamination, as revealed by molecular biology techniques. Z. mays plants inoculated with either of the tested strains may have potential application in a strategy of soil remediation, in particular short-term phytostabilization, coupled with biomass production for energy purposes.

Inoculating Helianthus annuus (sunflower) grown in zinc and cadmium contaminated soils with plant growth promoting bacteria--effects on phytoremediation strategies.

Plant growth promoting bacteria (PGPR) may help reducing the toxicity of heavy metals to plants in polluted environments. In this work the effects of inoculating metal resistant and plant growth promoting bacterial strains on the growth of Helianthus annuus grown in Zn and Cd spiked soils were assessed. The PGPR strains Ralstonia eutropha (B1) and Chrysiobacterium humi (B2) reduced losses of weight in metal exposed plants and induced changes in metal bioaccumulation and bioconcentration - with strain B2 decreasing up to 67% Zn accumulation and by 20% Zn bioconcentration factor (BCF) in the shoots, up to 64% Zn uptake and 38% Zn BCF in the roots, and up to 27% Cd uptake and 27% Cd BCF in plant roots. The impact of inoculation on the bacterial communities in the rhizosphere of the plant was also assessed. Bacterial community diversity decreased with increasing levels of metal contamination in the soil, but in rhizosphere soil of plants inoculated with the PGPR strains, a higher bacterial diversity was kept throughout the experimental period. Inoculation of sunflower, particularly with C. humi (B2), appears to be an effective way of enhancing the short term stabilization potential of the plant in metal contaminated land, lowering losses in plant biomass and decreasing aboveground tissue contamination.

Effect of diflubenzuron on the development of Pinus pinaster seedlings inoculated with the ectomycorrhizal fungus Pisolithus tinctorius.

Diflubenzuron (DFB) is an insecticide commonly used to control forest pests. The objectives of this study were to assess the effect of diflubenzuron on the development of Pinus pinaster seedlings and Pisolithus tinctorius under laboratory conditions and to study the possible protective role of this ectomycorrhizal fungus against the effects of diflubenzuron. In vitro experiments revealed that diflubenzuron inhibited fungal growth at all tested concentrations (0.01, 0.1, 1, 10 and 100 mg L(-1)). Root growth was inhibited at the two highest diflubenzuron concentrations. The activity of the antioxidant defence system of non-inoculated P. pinaster increased at 1 and 10 mg DFB kg(-1) substrate, and inoculation increased the threshold to the highest concentration. The protective role of the ectomycorrhizal fungus was seen in the increase of CAT activity. This study revealed that despite causing no mortality, diflubenzuron has the ability to cause sub-lethal damage to P. pinaster. The disproportionate use of this insecticide may lead to higher amounts of its residues in soil and the biosphere, endangering trees, fungi and their symbiosis.