RESUMO
A series of polythiophenes with varying side chain density was synthesized, and their electrical and thermoelectric properties were investigated. Aligned and non-aligned thin films of the polymers were characterized in the neutral and chemically doped states. Optical and diffraction measurements revealed an overall lower order in the thin films with lower side chain density, also confirmed using polarized optical experiments on aligned thin films. However, upon doping the non-aligned films, a sixfold increase in electrical conductivity was observed for the polythiophene with the lowest side chain density compared to poly(3-hexylthiophene) (P3HT). We found that the improvement in conductivity was not due to a larger charge carrier density but an increase in charge carrier mobility after doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). On the other hand, doped aligned films did not show the same trend; lower side chain density instead led to a lower conductivity and Seebeck coefficient compared to those for P3HT. This was attributed to the poorer alignment of the polymer thin films with lower side chain density. The study demonstrates that optimizing side chain density is a synthetically simple and effective way to improve electrical conductivity in polythiophene films relevant to thermoelectric applications.
RESUMO
The stiffness of the cardiovascular environment changes during ageing and in disease and contributes to disease incidence and progression. Changing collagen expression and cross-linking regulate the rigidity of the cardiac extracellular matrix (ECM). Additionally, basal lamina glycoproteins, especially laminin and fibronectin regulate cardiomyocyte adhesion formation, mechanics and mechanosignalling. Laminin is abundant in the healthy heart, but fibronectin is increasingly expressed in the fibrotic heart. ECM receptors are co-regulated with the changing ECM. Owing to differences in integrin dynamics, clustering and downstream adhesion formation this is expected to ultimately influence cardiomyocyte mechanosignalling; however, details remain elusive. Here, we sought to investigate how different cardiomyocyte integrin/ligand combinations affect adhesion formation, traction forces and mechanosignalling, using a combination of uniformly coated surfaces with defined stiffness, polydimethylsiloxane nanopillars, micropatterning and specifically designed bionanoarrays for precise ligand presentation. Thereby we found that the adhesion nanoscale organization, signalling and traction force generation of neonatal rat cardiomyocytes (which express both laminin and fibronectin binding integrins) are strongly dependent on the integrin/ligand combination. Together our data indicate that the presence of fibronectin in combination with the enhanced stiffness in fibrotic areas will strongly impact on the cardiomyocyte behaviour and influence disease progression. This article is part of the theme issue 'The cardiomyocyte: new revelations on the interplay between architecture and function in growth, health, and disease'.
Assuntos
Fibronectinas , Laminina , Animais , Adesão Celular/fisiologia , Colágeno/metabolismo , Dimetilpolisiloxanos/metabolismo , Matriz Extracelular/fisiologia , Fibronectinas/metabolismo , Integrinas/metabolismo , Ligantes , Miócitos Cardíacos/metabolismo , RatosRESUMO
Nanocarbon-based field-effect transistor (NC-FET) biosensors are at the forefront of future diagnostic technology. By integrating biological molecules with electrically conducting carbon-based platforms, high sensitivity real-time multiplexed sensing is possible. Combined with their small footprint, portability, ease of use, and label-free sensing mechanisms, NC-FETs are prime candidates for the rapidly expanding areas of point-of-care testing, environmental monitoring and biosensing as a whole. In this review we provide an overview of the basic operational mechanisms behind NC-FETs, synthesis and fabrication of FET devices, and developments in functionalisation strategies for biosensing applications.
Assuntos
Técnicas Biossensoriais , Transistores EletrônicosRESUMO
The application of stimuli-responsive microgels and nanogels in drug delivery, catalysis, sensing, and coatings is restricted currently by the limited understanding of the factors influencing their adsorption dynamics and structural changes at interfaces. We have used neutron reflectivity to resolve, on the Ångström scale, the structure of 5% crosslinked N-isopropylacrylamide nanogels at both hydrophobic and hydrophilic interfaces in situ, as a function of temperature and bulk nanogel concentration. Our results show that the higher flexibility given by the low crosslinker content allows for a more ordered structure and packing. The adsorption of the thermoresponsive nanogels is primarily driven by temperature, more specifically its proximity to its volume phase transition temperature, while concentration plays a secondary role. Hydrophobic interactions drive the conformation of the first layer at the interface, which plays a key role in influencing the overall nanogel structure. The mobility of the first layer at the air-water interface as opposed to the interfacial confinement at the solid (SiC8)-liquid interface, results in a different conformation, a more compact and less deformed packing structure, which ultimately drives the structure of the subsequent layers. The evidence for the different structural conformations determined by the degree of hydrophobicity of the interface provides new knowledge, which is essential for the development of further applications. The key role of hydrophobic interactions in driving adsorption and interfacial behavior was also confirmed by fluid AFM experiments which visualized adherence of the nanogels to SiC8 modified surfaces.
Assuntos
Nêutrons , Adsorção , Interações Hidrofóbicas e Hidrofílicas , Conformação Molecular , NanogéisRESUMO
The ability to detect proteins through gating conductance by their unique surface electrostatic signature holds great potential for improving biosensing sensitivity and precision. Two challenges are: (1) defining the electrostatic surface of the incoming ligand protein presented to the conductive surface; (2) bridging the Debye gap to generate a measurable response. Herein, we report the construction of nanoscale protein-based sensing devices designed to present proteins in defined orientations; this allowed us to control the local electrostatic surface presented within the Debye length, and thus modulate the conductance gating effect upon binding incoming protein targets. Using a ß-lactamase binding protein (BLIP2) as the capture protein attached to carbon nanotube field effect transistors in different defined orientations. Device conductance had influence on binding TEM-1, an important ß-lactamase involved in antimicrobial resistance (AMR). Conductance increased or decreased depending on TEM-1 presenting either negative or positive local charge patches, demonstrating that local electrostatic properties, as opposed to protein net charge, act as the key driving force for electrostatic gating. This, in turn can, improve our ability to tune the gating of electrical biosensors toward optimized detection, including for AMR as outlined herein.
Assuntos
Técnicas Biossensoriais , Nanotubos de Carbono/química , Proteínas/química , Semicondutores , Eletricidade EstáticaRESUMO
Here, we report the controlled assembly of SWCNT-GFP hybrids employing DNA as a linker. Two distinct, enriched SWCNTs chiralities, (6,5), (7,6), and an unsorted SWCNT solution, were selectively functionalized with DNA and hybridized to a complementary GFPDNA conjugate. Atomic force microscopy images confirmed that GFP attachment occurred predominantly at the terminal ends of the nanotubes, as designed. The electronic coupling of the proteins to the nanotubes was confirmed via in-solution fluorescence spectroscopy, that revealed an increase in the emission intensity of GFP when linked to the CNTs.
Assuntos
Técnicas Biossensoriais/métodos , DNA/química , Nanotubos de Carbono/química , Proteínas/química , Microscopia de Força Atômica/métodosRESUMO
The ability to detect proteins through gating conductance by their unique surface electrostatic signature holds great potential for improving biosensing sensitivity and precision. Two challenges are: (1) defining the electrostatic surface of the incoming ligand protein presented to the conductive surface; (2) bridging the Debye gap to generate a measurable response. Herein, we report the construction of nanoscale protein-based sensing devices designed to present proteins in defined orientations; this allowed us to control the local electrostatic surface presented within the Debye length, and thus modulate the conductance gating effect upon binding incoming protein targets. Using a ß-lactamase binding protein (BLIP2) as the capture protein attached to carbon nanotube field effect transistors in different defined orientations. Device conductance had influence on binding TEM-1, an important ß-lactamase involved in antimicrobial resistance (AMR). Conductance increased or decreased depending on TEM-1 presenting either negative or positive local charge patches, demonstrating that local electrostatic properties, as opposed to protein net charge, act as the key driving force for electrostatic gating. This, in turn can, improve our ability to tune the gating of electrical biosensors toward optimized detection, including for AMR as outlined herein.
RESUMO
Here we report the use of DNA nanostructures as platforms to monitor the inherent conformational changes of aptamers upon analyte binding, with single-molecule resolution and real-time capability. An aptasensor designed to sense cortisol was found to suffer from instability in solution, but this was reconciled via a rational design of a single-molecule sensing platform. In this regard, DNA origami was employed to immobilise individual aptasensors on a glass surface and to ensure adequate interaction with their environment, for single-molecule analysis. The strategy presented here can be applied to any aptamer obtained by the destabilisation of a duplex in a SELEX process, and hence employed in the rational design of single-molecule biosensors.
Assuntos
Aptâmeros de Nucleotídeos/química , Biomarcadores/análise , DNA/química , Ácidos Nucleicos Imobilizados/química , Nanoestruturas/química , Técnicas Biossensoriais , Corantes Fluorescentes/química , Vidro/química , Conformação de Ácido Nucleico , Técnica de Seleção de Aptâmeros , Imagem Individual de Molécula , Propriedades de SuperfícieRESUMO
The ability of amyloid-ß peptide (Aß) to disrupt membrane integrity and cellular homeostasis is believed to be central to Alzheimer's disease pathology. Aß is reported to have various impacts on the lipid bilayer, but a clearer picture of Aß influence on membranes is required. Here, we use atomic force and transmission electron microscopies to image the impact of different isolated Aß assembly types on lipid bilayers. We show that only oligomeric Aß can profoundly disrupt the bilayer, visualized as widespread lipid extraction and subsequent deposition, which can be likened to an effect expected from the action of a detergent. We further show that Aß oligomers cause widespread curvature and discontinuities within lipid vesicle membranes. In contrast, this detergent-like effect was not observed for Aß monomers and fibers, although Aß fibers did laterally associate and embed into the upper leaflet of the bilayer. The marked impact of Aß oligomers on membrane integrity identified here reveals a mechanism by which these oligomers may be cytotoxic.
Assuntos
Doença de Alzheimer , Peptídeos beta-Amiloides/química , Bicamadas Lipídicas/química , Multimerização Proteica , Peptídeos beta-Amiloides/metabolismo , Humanos , Bicamadas Lipídicas/metabolismoRESUMO
Herein a strategy is presented for the assembly of both static and stimuli-responsive single-molecule heterostructures, where the distance and electronic coupling between an individual functional nanomoiety and a carbon nanostructure are tuned via the use of DNA linkers. As proof of concept, the formation of 1:1 nanohybrids is controlled, where single quantum dots (QDs) are tethered to the ends of individual carbon nanotubes (CNTs) in solution with DNA interconnects of different lengths. Photoluminescence investigations-both in solution and at the single-hybrid level-demonstrate the electronic coupling between the two nanostructures; notably this is observed to progressively scale, with charge transfer becoming the dominant process as the linkers length is reduced. Additionally, stimuli-responsive CNT-QD nanohybrids are assembled, where the distance and hence the electronic coupling between an individual CNT and a single QD are dynamically modulated via the addition and removal of potassium (K+) cations; the system is further found to be sensitive to K+ concentrations from 1 pM to 25 × 10-3 m. The level of control demonstrated here in modulating the electronic coupling of reconfigurable single-molecule heterostructures, comprising an individual functional nanomoiety and a carbon nanoelectrode, is of importance for the development of tunable molecular optoelectronic systems and devices.
RESUMO
Here we describe a facile strategy of general applicability for controlling the immobilization of individual nanomoieties on nanopatterned surfaces with single-molecule control. We combine the ability of DNA nanostructures as programmable platforms, with a one-step Focused Ion Beam nanopatterning, to demonstrate the controlled immobilization of DNA origami functionalized with individual quantum dots (QDs) at predesigned positions on glass coverslips and silicon substrates. Remarkably, the platform developed is reusable after a simple cleaning process, and can be designed to display different geometrical arrangements.
Assuntos
DNA/química , Nanotecnologia/instrumentação , Nanoestruturas/química , Conformação de Ácido Nucleico , Pontos QuânticosRESUMO
We report the site-specific coupling of single proteins to individual carbon nanotubes (CNTs) in solution and with single-molecule control. Using an orthogonal Click reaction, Green Fluorescent Protein (GFP) was engineered to contain a genetically encoded azide group and then bound to CNT ends in different configurations: in close proximity or at longer distances from the GFP's functional center. Atomic force microscopy and fluorescence analysis in solution and on surfaces at the single-protein level confirmed the importance of bioengineering optimal protein attachment sites to achieve direct protein-nanotube communication and bridging.
RESUMO
We present a facile strategy of general applicability for the assembly of individual nanoscale moieties in array configurations with single-molecule control. Combining the programming ability of DNA as a scaffolding material with a one-step lithographic process, we demonstrate the patterning of single quantum dots (QDs) at predefined locations on silicon and transparent glass surfaces: as proof of concept, clusters of either one, two, or three QDs were assembled in highly uniform arrays with a 60 nm interdot spacing within each cluster. Notably, the platform developed is reusable after a simple cleaning process and can be designed to exhibit different geometrical arrangements.
RESUMO
Layered two-dimensional (2D) inorganic transition-metal dichalchogenides (TMDs) have attracted great interest as a result of their potential application in optoelectronics, catalysis, and medicine. However, methods to functionalize and process such 2D TMDs remain scarce. We have established a facile route towards functionalized layered MoS2 . We found that the reaction of liquid-exfoliated 2Dâ MoS2 , with M(OAc)2 salts (M=Ni, Cu, Zn; OAc=acetate) yielded functionalized MoS2 -M(OAc)2 materials. Importantly, this method furnished the 2H-polytype of MoS2 which is a semiconductor. X-ray photoelectron spectroscopy (XPS), diffuse reflectance infrared Fourier transform spectroscopy (DRIFT-IR), and thermogravimetric analysis (TGA) provide strong evidence for the coordination of MoS2 surface sulfur atoms to the M(OAc)2 salt. Interestingly, functionalization of 2H-MoS2 allows for its dispersion/processing in more conventional laboratory solvents.