Optimizing large-scale autologous human keratinocyte sheets for major burns-Toward an animal-free production and a more accessible clinical application.

BACKGROUND AND AIMS: Autologous keratinocyte sheets constitute an important component of the burn wound treatment toolbox available to a surgeon and can be considered a life-saving procedure for patients with severe burns over 50% of their total body surface area. Large-scale keratinocyte sheet cultivation still fundamentally relies on the use of animal components such as inactivated murine 3T3 fibroblasts as feeders, animal-derived enzymes such as trypsin, as well as media components such as fetal bovine serum (FBS). This study was therefore aimed to optimize autologous keratinocyte sheets by comparing various alternatives to critical components in their production. METHODS: Human skin samples were retrieved from remnant operative tissues. Cell isolation efficiency and viability were investigated by comparing the efficacy of porcine-derived trypsin and animal-free enzymes (Accutase and TrypLESelect). The subsequent expansion of the cells and the keratinocyte sheet formation was analyzed, comparing various cell culture substrates (inactivated murine 3T3 fibroblasts, inactivated human fibroblasts, Collagen I or plain tissue culture plastic), as well as media containing serum or chemically defined animal-free media. RESULTS: The cell isolation step showed clear cell yield advantages when using porcine-derived trypsin, compared to animal-free alternatives. The keratinocyte sheets produced using animal-free serum were similar to those produced using 3T3 feeder layer and FBS-containing medium, particularly in mechanical integrity as all grafts were liftable. In addition, sheets grown on collagen in an animal-free medium showed indications of advantages in homogeneity, speed, reduced variability, and differentiation status compared to the other growth conditions investigated. Most importantly, the procedure was compatible with the up-scaling requirements of major burn wound treatments. CONCLUSION: This study demonstrated that animal-free components could be used successfully to reduce the risk profile of large-scale autologous keratinocyte sheet production, and thereby increase clinical accessibility.

Thermal conditioning improves quality and speed of keratinocyte sheet production for burn wound treatment.

BACKGROUND AIMS: Cultured patient-specific keratinocyte sheets have been used clinically since the 1970s for the treatment of large severe burns. However, despite significant developments in recent years, successful and sustainable treatment is still a challenge. Reliable, high-quality grafts with faster availability and a flexible time window for transplantation are required to improve clinical outcomes. METHODS: Keratinocytes are usually grown in vitro at 37°C. Given the large temperature differences in native skin tissue, the aim of the authors' study was to investigate thermal conditioning of keratinocyte sheet production. Therefore, the influence of 31°C, 33°C and 37°C on cell expansion and differentiation in terms of proliferation and sheet formation efficacy was investigated. In addition, the thermal effect on the biological status and thus the quality of the graft was assessed on the basis of the release of wound healing-related biofactors in various stages of graft development. RESULTS: The authors demonstrated that temperature is a decisive factor in the production of human keratinocyte sheets. By using specific temperature ranges, the authors have succeeded in optimizing the individual manufacturing steps. During the cell expansion phase, cultivation at 37°C was most effective. After 6 days of culture at 37°C, three times and six times higher numbers of viable cells were obtained compared with 33°C and 31°C. During the cell differentiation and sheet formation phase, however, the cells benefited from a mildly hypothermic temperature of 33°C. Keratinocytes showed increased differentiation potential and formed better epidermal structures, which led to faster biomechanical sheet stability at day 18. In addition, a cultivation temperature of 33°C resulted in a longer lasting and higher secretion of the investigated immunomodulatory, anti-inflammatory, angiogenic and pro-inflammatory biofactors. CONCLUSIONS: These results show that by using specific temperature ranges, it is possible to accelerate the large-scale production of cultivated keratinocyte sheets while at the same time improving quality. Cultivated keratinocyte sheets are available as early as 18 days post-biopsy and at any time for 7 days thereafter, which increases the flexibility of the process for surgeons and patients alike. These findings will help to provide better clinical outcomes, with an increased take rate in severe burn patients.

Geometry influences inflammatory host cell response and remodeling in tissue-engineered heart valves in-vivo.

Regenerative tissue-engineered matrix-based heart valves (TEM-based TEHVs) may become an alternative to currently-used bioprostheses for transcatheter valve replacement. We recently identified TEM-based TEHVs-geometry as one key-factor guiding their remodeling towards successful long-term performance or failure. While our first-generation TEHVs, with a simple, non-physiological valve-geometry, failed over time due to leaflet-wall fusion phenomena, our second-generation TEHVs, with a computational modeling-inspired design, showed native-like remodeling resulting in long-term performance. However, a thorough understanding on how TEHV-geometry impacts the underlying host cell response, which in return determines tissue remodeling, is not yet fully understood. To assess that, we here present a comparative samples evaluation derived from our first- and second-generation TEHVs. We performed an in-depth qualitative and quantitative (immuno-)histological analysis focusing on key-players of the inflammatory and remodeling cascades (M1/M2 macrophages, α-SMA+- and endothelial cells). First-generation TEHVs were prone to chronic inflammation, showing a high presence of macrophages and α-SMA+-cells, hinge-area thickening, and delayed endothelialization. Second-generation TEHVs presented with negligible amounts of macrophages and α-SMA+-cells, absence of hinge-area thickening, and early endothelialization. Our results suggest that TEHV-geometry can significantly influence the host cell response by determining the infiltration and presence of macrophages and α-SMA+-cells, which play a crucial role in orchestrating TEHV remodeling.

Lipoconstruct surface topography grating size influences vascularization onset in the dorsal skinfold chamber model.

After skin tissue injury or pathological removal, vascularization timing is paramount in graft survival. As full thickness skin grafts often fail to become perfused over larger surfaces, split-thickness grafts are preferred and can be used together with biomaterials, which themselves are non-angiogenic. One way of promoting vascular ingrowth is to "pre-vascularize" an engineered substitute by introducing endothelial cells (ECs). Since it has been previously demonstrated that surface structured biomaterials have an effect on wound healing, skin regeneration, and fibrosis reduction, we proposed that a microvascular-rich lipoconstruct with anisotropic topographical cues could be a clinically translatable vascularization approach. Murine lipofragments were formed with three polydimethylsiloxane molds (flat, 5 µm, and 50 µm parallel gratings) and implanted into the dorsal skinfold chamber of male C57BL/6 mice. Vascular ingrowth was observed through intravital microscopy over 21 days and further assessed by histology and protein identification. Our investigation revealed that topographical feature size influenced the commencement of neovascular ingrowth, with 5 µm gratings exhibiting early construct perfusion at 3 days post-operation, and 50 µm being delayed until day 5. We therefore postulate that surface structured lipoconstructs may serve as an easily obtained and produced construct suitable for providing soft tissue and ECs to tissue defects. STATEMENT OF SIGNIFICANCE: Skin graft failures due to inadequate or uneven perfusion frequently occur and can be even more complicated in deep, difficult to heal wounds, or bone coverage. In complex injuries, biomaterials are often used to cover bone structures with a standard split thickness graft; however, perfusion can take up to 3 weeks. Thus, any means to promote faster and uniform vascularization could significantly reduce healing time, as well as lower patient down-time. As pre-vascularized constructs have reported success in research, we created a cost-efficient, translatable method with no additional laboratory time as adipose tissue can be harvested and used immediately. We further used surface topography as an aspect to modulate construct perfusion, which has been reported for the first time here.

Computational modeling guides tissue-engineered heart valve design for long-term in vivo performance in a translational sheep model.

Valvular heart disease is a major cause of morbidity and mortality worldwide. Current heart valve prostheses have considerable clinical limitations due to their artificial, nonliving nature without regenerative capacity. To overcome these limitations, heart valve tissue engineering (TE) aiming to develop living, native-like heart valves with self-repair, remodeling, and regeneration capacity has been suggested as next-generation technology. A major roadblock to clinically relevant, safe, and robust TE solutions has been the high complexity and variability inherent to bioengineering approaches that rely on cell-driven tissue remodeling. For heart valve TE, this has limited long-term performance in vivo because of uncontrolled tissue remodeling phenomena, such as valve leaflet shortening, which often translates into valve failure regardless of the bioengineering methodology used to develop the implant. We tested the hypothesis that integration of a computationally inspired heart valve design into our TE methodologies could guide tissue remodeling toward long-term functionality in tissue-engineered heart valves (TEHVs). In a clinically and regulatory relevant sheep model, TEHVs implanted as pulmonary valve replacements using minimally invasive techniques were monitored for 1 year via multimodal in vivo imaging and comprehensive tissue remodeling assessments. TEHVs exhibited good preserved long-term in vivo performance and remodeling comparable to native heart valves, as predicted by and consistent with computational modeling. TEHV failure could be predicted for nonphysiological pressure loading. Beyond previous studies, this work suggests the relevance of an integrated in silico, in vitro, and in vivo bioengineering approach as a basis for the safe and efficient clinical translation of TEHVs.

Puncturing of lyophilized tissue engineered vascular matrices enhances the efficiency of their recellularization.

Data on in vitro engineered "off the shelf" matrices support the concept of endogenous cellular repopulation driving the graft's remodeling via immune-mediated response. This seems important to further accelerate the cell reconstitution and may play a crucial role when mononuclear cells are used. Nevertheless, studies on decellularized xenogeneic grafts showed only limited host cell repopulation post-implantation. This study aims at a systematic comparison of reseeding methods (dripping, injection, bathing in a cell suspension and combined puncturing-dripping method) to define the most efficient technique enhancing recellularization of tissue engineered vascular matrices (patches, vessels, small diameter and standard size valves) prior implantation. The constructs were analyzed histologically, biochemically and biomechanically. Various preconditioning treatments (wet, lyophilized and air-dried) combined with reseeding methods demonstrated the highest cell loading efficiency, despite applied crimping and flow stress, of lyophilization followed by puncturing-dripping technique. This novel seeding method allows for an efficient, time-saving graft reseeding that can be used within a one-step cardiovascular clinical intervention. STATEMENT OF SIGNIFICANCE: The concept of living tissue engineered, self-repairing, autologous cardiovascular replacements, was proposed alternatively to existing synthetic/xenogeneic prostheses. Recent studies in animal models demonstrate faster in vivo recellularization after grafts pre-seeding with cells prior implantation. Pre-seeded cells hold either, the ability to differentiate directionally or attract host cells, crucial for graft integration and remodeling. It is unclear, however, how efficient the pre-loading is and how well cells withstand the flow. The study presents a systematic overview of cell loading techniques of different cardiovascular constructs, tested under static and dynamic conditions. Comparison illustrates a significantly higher efficiency of cells loading in lyophilized tissues punctured before their standard seeding. This technique may beneficially accelerate remodeling of cardiovascular grafts in further in vivo studies.

Adipose Tissue-Derived Stem Cells in Regenerative Medicine.

In regenerative medicine, adult stem cells are the most promising cell types for cell-based therapies. As a new source for multipotent stem cells, human adipose tissue has been introduced. These so called adipose tissue-derived stem cells (ADSCs) are considered to be ideal for application in regenerative therapies. Their main advantage over mesenchymal stem cells derived from other sources, e.g. from bone marrow, is that they can be easily and repeatable harvested using minimally invasive techniques with low morbidity. ADSCs are multipotent and can differentiate into various cell types of the tri-germ lineages, including e.g. osteocytes, adipocytes, neural cells, vascular endothelial cells, cardiomyocytes, pancreatic ß-cells, and hepatocytes. Interestingly, ADSCs are characterized by immunosuppressive properties and low immunogenicity. Their secretion of trophic factors enforces the therapeutic and regenerative outcome in a wide range of applications. Taken together, these particular attributes of ADSCs make them highly relevant for clinical applications. Consequently, the therapeutic potential of ADSCs is enormous. Therefore, this review will provide a brief overview of the possible therapeutic applications of ADSCs with regard to their differentiation potential into the tri-germ lineages. Moreover, the relevant advancements made in the field, regulatory aspects as well as other challenges and obstacles will be highlighted.

Heart Valve Replacements with Regenerative Capacity.

The incidence of severe valvular dysfunctions (e.g., stenosis and insufficiency) is increasing, leading to over 300,000 valves implanted worldwide yearly. Clinically used heart valve replacements lack the capacity to grow, inherently requiring repetitive and high-risk surgical interventions during childhood. The aim of this review is to present how different tissue engineering strategies can overcome these limitations, providing innovative valve replacements that proved to be able to integrate and remodel in pre-clinical experiments and to have promising results in clinical studies. Upon description of the different types of heart valve tissue engineering (e.g., in vitro, in situ, in vivo, and the pre-seeding approach) we focus on the clinical translation of this technology. In particular, we will deepen the many technical, clinical, and regulatory aspects that need to be solved to endure the clinical adaptation and the commercialization of these promising regenerative valves.

Percutaneous pulmonary valve replacement using completely tissue-engineered off-the-shelf heart valves: six-month in vivo functionality and matrix remodelling in sheep.

AIMS: The objective was to implant a stented decellularised tissue-engineered heart valve (sdTEHV) percutaneously in an animal model, to assess its in vivo functionality and to examine the repopulation and remodelling of the valvular matrix by the recipient's autologous cells. METHODS AND RESULTS: Prototypes of sdTEHV were cultured in vitro, decellularised and percutaneously implanted into the pulmonary position in 15 sheep. Functionality was assessed monthly by intracardiac echocardiography (ICE). Valves were explanted after eight, 16 or 24 weeks and analysed macroscopically, histologically and by electron microscopy. Implantation was successful in all animals. Valves showed normal pressure gradients throughout the study. Due to a suboptimal design with small coaptation area, stent ovality led to immediate regurgitation which continuously increased during follow-up. Analyses revealed complete endothelialisation and rapid cellular repopulation and remodelling of the entire matrix. Valves were free from endocarditis, calcification and graft rejection. CONCLUSIONS: sdTEHV can be safely implanted percutaneously. The fast autologous recellularisation and the extensive matrix remodelling demonstrate the valve's potential as a next-generation percutaneous prosthesis with the capacity for tissue self-maintenance and longevity. Regurgitation may be prevented by valve design optimisation.

Surgical technique: establishing a pre-clinical large animal model to test aortic valve leaflet substitute.

To overcome current limitations of valve substitutes and tissue substitutes the technology of tissue engineering (TE) continues to offer new perspectives in congenital cardiac surgery. We report our experiences and results implanting a decellularized TE patch in nine sheep in orthotropic position as aortic valve leaflet substitute. Establishing the animal model, feasibility, cardiopulmonary bypass issues and operative technique are highlighted.

In vitro fabrication of autologous living tissue-engineered vascular grafts based on prenatally harvested ovine amniotic fluid-derived stem cells.

Amniotic fluid cells (AFCs) have been proposed as a valuable source for tissue engineering and regenerative medicine. However, before clinical implementation, rigorous evaluation of this cell source in clinically relevant animal models accepted by regulatory authorities is indispensable. Today, the ovine model represents one of the most accepted preclinical animal models, in particular for cardiovascular applications. Here, we investigate the isolation and use of autologous ovine AFCs as cell source for cardiovascular tissue engineering applications. Fetal fluids were aspirated in vivo from pregnant ewes (n = 9) and from explanted uteri post mortem at different gestational ages (n = 91). Amniotic non-allantoic fluid nature was evaluated biochemically and in vivo samples were compared with post mortem reference samples. Isolated cells revealed an immunohistochemical phenotype similar to ovine bone marrow-derived mesenchymal stem cells (MSCs) and showed expression of stem cell factors described for embryonic stem cells, such as NANOG and STAT-3. Isolated ovine amniotic fluid-derived MSCs were screened for numeric chromosomal aberrations and successfully differentiated into several mesodermal phenotypes. Myofibroblastic ovine AFC lineages were then successfully used for the in vitro fabrication of small- and large-diameter tissue-engineered vascular grafts (n = 10) and cardiovascular patches (n = 34), laying the foundation for the use of this relevant pre-clinical in vivo assessment model for future amniotic fluid cell-based therapeutic applications.

Long-Term Endurance Exercise in Humans Stimulates Cell Fusion of Myoblasts along with Fusogenic Endogenous Retroviral Genes In Vivo.

Myogenesis is defined as growth, differentiation and repair of muscles where cell fusion of myoblasts to multinucleated myofibers is one major characteristic. Other cell fusion events in humans are found with bone resorbing osteoclasts and placental syncytiotrophoblasts. No unifying gene regulation for natural cell fusions has been found. We analyzed skeletal muscle biopsies of competitive cyclists for muscle-specific attributes and expression of human endogenous retrovirus (ERV) envelope genes due to their involvement in cell fusion of osteoclasts and syncytiotrophoblasts. Comparing muscle biopsies from post- with the pre-competitive seasons a significant 2.25-fold increase of myonuclei/mm fiber, a 2.38-fold decrease of fiber area/nucleus and a 3.1-fold decrease of satellite cells (SCs) occurred. We propose that during the pre-competitive season SC proliferation occurred following with increased cell fusion during the competitive season. Expression of twenty-two envelope genes of muscle biopsies demonstrated a significant increase of putative muscle-cell fusogenic genes Syncytin-1 and Syncytin-3, but also for the non-fusogenic erv3. Immunohistochemistry analyses showed that Syncytin-1 mainly localized to the sarcolemma of myofibers positive for myosin heavy-chain isotypes. Cellular receptors SLC1A4 and SLC1A5 of Syncytin-1 showed significant decrease of expression in post-competitive muscles compared with the pre-competitive season, but only SLC1A4 protein expression localized throughout the myofiber. Erv3 protein was strongly expressed throughout the myofiber, whereas envK1-7 localized to SC nuclei and myonuclei. Syncytin-1 transcription factors, PPARγ and RXRα, showed no protein expression in the myofiber, whereas the pCREB-Ser133 activator of Syncytin-1 was enriched to SC nuclei and myonuclei. Syncytin-1, Syncytin-3, SLC1A4 and PAX7 gene regulations along with MyoD1 and myogenin were verified during proliferating or actively-fusing human primary myoblast cell cultures, resembling muscle biopsies of cyclists. Myoblast treatment with anti-Synycytin-1 abrogated cell fusion in vitro. Our findings support functional roles for ERV envelope proteins, especially Syncytin-1, contributing to cell fusion of myotubes.

Transcatheter implantation of homologous "off-the-shelf" tissue-engineered heart valves with self-repair capacity: long-term functionality and rapid in vivo remodeling in sheep.

OBJECTIVES: This study sought to evaluate long-term in vivo functionality, host cell repopulation, and remodeling of "off-the-shelf" tissue engineered transcatheter homologous heart valves. BACKGROUND: Transcatheter valve implantation has emerged as a valid alternative to conventional surgery, in particular for elderly high-risk patients. However, currently used bioprosthetic transcatheter valves are prone to progressive dysfunctional degeneration, limiting their use in younger patients. To overcome these limitations, the concept of tissue engineered heart valves with self-repair capacity has been introduced as next-generation technology. METHODS: In vivo functionality, host cell repopulation, and matrix remodeling of homologous transcatheter tissue-engineered heart valves (TEHVs) was evaluated up to 24 weeks as pulmonary valve replacements (transapical access) in sheep (n = 12). As a control, tissue composition and structure were analyzed in identical not implanted TEHVs (n = 5). RESULTS: Transcatheter implantation was successful in all animals. Valve functionality was excellent displaying sufficient leaflet motion and coaptation with only minor paravalvular leakage in some animals. Mild central regurgitation was detected after 8 weeks, increasing to moderate after 24 weeks, correlating to a compromised leaflet coaptation. Mean and peak transvalvular pressure gradients were 4.4 ± 1.6 mm Hg and 9.7 ± 3.0 mm Hg, respectively. Significant matrix remodeling was observed in the entire valve and corresponded with the rate of host cell repopulation. CONCLUSIONS: For the first time, the feasibility and long-term functionality of transcatheter-based homologous off-the-shelf tissue engineered heart valves are demonstrated in a relevant pre-clinical model. Such engineered heart valves may represent an interesting alternative to current prostheses because of their rapid cellular repopulation, tissue remodeling, and therewith self-repair capacity. The concept of homologous off-the-shelf tissue engineered heart valves may therefore substantially simplify previous tissue engineering concepts toward clinical translation.

Living-engineered valves for transcatheter venous valve repair.

BACKGROUND: Chronic venous insufficiency (CVI) represents a major global health problem with increasing prevalence and morbidity. CVI is due to an incompetence of the venous valves, which causes venous reflux and distal venous hypertension. Several studies have focused on the replacement of diseased venous valves using xeno- and allogenic transplants, so far with moderate success due to immunologic and thromboembolic complications. Autologous cell-derived tissue-engineered venous valves (TEVVs) based on fully biodegradable scaffolds could overcome these limitations by providing non-immunogenic, non-thrombogenic constructs with remodeling and growth potential. METHODS: Tri- and bicuspid venous valves (n=27) based on polyglycolic acid-poly-4-hydroxybutyrate composite scaffolds, integrated into self-expandable nitinol stents, were engineered from autologous ovine bone-marrow-derived mesenchymal stem cells (BM-MSCs) and endothelialized. After in vitro conditioning in a (flow) pulse duplicator system, the TEVVs were crimped (n=18) and experimentally delivered (n=7). The effects of crimping on the tissue-engineered constructs were investigated using histology, immunohistochemistry, scanning electron microscopy, grating interferometry (GI), and planar fluorescence reflectance imaging. RESULTS: The generated TEVVs showed layered tissue formation with increasing collagen and glycosaminoglycan levels dependent on the duration of in vitro conditioning. After crimping no effects were found on the MSC level in scanning electron microscopy analysis, GI, histology, and extracellular matrix analysis. However, substantial endothelial cell loss was detected after the crimping procedure, which could be reduced by increasing the static conditioning phase. CONCLUSIONS: Autologous living small-diameter TEVVs can be successfully fabricated from ovine BM-MSCs using a (flow) pulse duplicator conditioning approach. These constructs hold the potential to overcome the limitations of currently used non-autologous replacement materials and may open new therapeutic concepts for the treatment of CVI in the future.

A three-dimensional engineered artery model for in vitro atherosclerosis research.

The pathogenesis of atherosclerosis involves dysfunctions of vascular endothelial cells and smooth muscle cells as well as blood borne inflammatory cells such as monocyte-derived macrophages. In vitro experiments towards a better understanding of these dysfunctions are typically performed in two-dimensional cell culture systems. However, these models lack both the three-dimensional structure and the physiological pulsatile flow conditions of native arteries. We here describe the development and initial characterization of a tissue engineered artery equivalent, which is composed of human primary endothelial and smooth muscle cells and is exposed to flow in vitro. Histological analyses showed formation of a dense tissue composed of a tight monolayer of endothelial cells supported by a basement membrane and multiple smooth muscle cell layers. Both low (LDL) and high density lipoproteins (HDL) perfused through the artery equivalent were recovered both within endothelial cells and in the sub-endothelial intima. After activation of the endothelium with either tumour necrosis factor alpha (TNFα) or LDL, monocytes circulated through the model were found to adhere to the activated endothelium and to transmigrate into the intima. In conclusion, the described tissue engineered human artery equivalent model represents a significant step towards a relevant in vitro platform for the systematic assessment of pathogenic processes in atherosclerosis independently of any systemic factors.

Stem cell-based transcatheter aortic valve implantation: first experiences in a pre-clinical model.

OBJECTIVES: This study sought to investigate the combination of transcatheter aortic valve implantation and a novel concept of stem cell-based, tissue-engineered heart valves (TEHV) comprising minimally invasive techniques for both cell harvest and valve delivery. BACKGROUND: TAVI represents an emerging technology for the treatment of aortic valve disease. The used bioprostheses are inherently prone to calcific degeneration and recent evidence suggests even accelerated degeneration resulting from structural damage due to the crimping procedures. An autologous, living heart valve prosthesis with regeneration and repair capacities would overcome such limitations. METHODS: Within a 1-step intervention, trileaflet TEHV, generated from biodegradable synthetic scaffolds, were integrated into self-expanding nitinol stents, seeded with autologous bone marrow mononuclear cells, crimped and transapically delivered into adult sheep (n = 12). Planned follow-up was 4 h (Group A, n = 4), 48 h (Group B, n = 5) or 1 and 2 weeks (Group C, n = 3). TEHV functionality was assessed by fluoroscopy, echocardiography, and computed tomography. Post-mortem analysis was performed using histology, extracellular matrix analysis, and electron microscopy. RESULTS: Transapical implantation of TEHV was successful in all animals (n = 12). Follow-up was complete in all animals of Group A, three-fifths of Group B, and two-thirds of Group C (1 week, n = 1; 2 weeks, n = 1). Fluoroscopy and echocardiography displayed TEHV functionality demonstrating adequate leaflet mobility and coaptation. TEHV showed intact leaflet structures with well-defined cusps without signs of thrombus formation or structural damage. Histology and extracellular matrix displayed a high cellularity indicative for an early cellular remodeling and in-growth after 2 weeks. CONCLUSIONS: We demonstrate the principal feasibility of a transcatheter, stem cell-based TEHV implantation into the aortic valve position within a 1-step intervention. Its long-term functionality proven, a stem cell-based TEHV approach may represent a next-generation heart valve concept.

Decellularized homologous tissue-engineered heart valves as off-the-shelf alternatives to xeno- and homografts.

Decellularized xenogenic or allogenic heart valves have been used as starter matrix for tissue-engineering of valve replacements with (pre-)clinical promising results. However, xenografts are associated with the risk of immunogenic reactions or disease transmission and availability of homografts is limited. Alternatively, biodegradable synthetic materials have been used to successfully create tissue-engineered heart valves (TEHV). However, such TEHV are associated with substantial technological and logistical complexity and have not yet entered clinical use. Here, decellularized TEHV, based on biodegradable synthetic materials and homologous cells, are introduced as an alternative starter matrix for guided tissue regeneration. Decellularization of TEHV did not alter the collagen structure or tissue strength and favored valve performance when compared to their cell-populated counterparts. Storage of the decellularized TEHV up to 18 months did not alter valve tissue properties. Reseeding the decellularized valves with mesenchymal stem cells was demonstrated feasible with minimal damage to the reseeded valve when trans-apical valve delivery was simulated. In conclusion, decellularization of in-vitro grown TEHV provides largely available off-the-shelf homologous scaffolds suitable for reseeding with autologous cells and trans-apical valve delivery.

Engineering of living autologous human umbilical cord cell-based septal occluder membranes using composite PGA-P4HB matrices.

Interventional closure of intracardiac wall defects using occluder devices has evolved as a highly attractive treatment option. However, incomplete and delayed healing reactions often result in a major risk of residual defects, thromboembolism, or device fractures. Biodegradable living tissue engineered occluder membranes (TEOMs) could provide autologous thromboresistant implants with growth and remodeling capacities. PGA-P4HB composite matrices were seeded with human umbilical cord-derived cells or vascular-derived control cells and exposed to static (n = 19) or dynamic (n = 13) conditioning. Harvested TEOMs were integrated into occluder frameworks, exposed to crimping and delivered into pre-formed defects of juvenile porcine hearts. Dynamically conditioned TEOM constructs showed higher collagen formation in histology than static constructs with significantly higher stiffness moduli in uniaxial tensile testing. Grating interferometry revealed substantial but inhomogeneous cone-like degradation of the composite matrices in dynamic conditioning. The crimping and delivery procedures resulted in no significant changes in macroscopy, histo-morphology, cellular viability, DNA or hydroxyproline content, and scanning electron microscopy findings. Here, we present the in vitro fabrication, crimping and experimental delivery of living human umbilical cord-cell derived TEOMs based on composite matrices as a potential future autologous therapy of intracardiac wall defects.