How molecular architecture defines quantum yields.

Understanding the intricate relationship between molecular architecture and function underpins most challenges at the forefront of chemical innovation. Bond-forming reactions are particularly influenced by the topology of a chemical structure, both on small molecule scale and in larger macromolecular frameworks. Herein, we elucidate the impact that molecular architecture has on the photo-induced cyclisations of a series of monodisperse macromolecules with defined spacers between photodimerisable moieties, and examine the relationship between propensity for intramolecular cyclisation and intermolecular network formation. We demonstrate a goldilocks zone of maximum reactivity between the sterically hindered and entropically limited regimes with a quantum yield of intramolecular cyclisation that is nearly an order of magnitude higher than the lowest value. As a result of the molecular design of trifunctional macromolecules, their quantum yields can be deconvoluted into the formation of two different cyclic isomers, as rationalised with molecular dynamics simulations. Critically, we visualise our solution-based studies with light-based additive manufacturing. We formulate four photoresists for microprinting, revealing that the precise positioning of functional groups is critical for resist performance, with lower intramolecular quantum yields leading to higher-quality printing in most cases.

Plenty of Space in the Backbone: Radical Ring-Opening Polymerization.

Radical polymerization is the most widely applied technique in both industry and fundamental science. However, its major drawback is that it typically yields polymers with non-functional, non-degradable all-carbon backbones-a limitation that radical ring-opening polymerization (rROP) allows to overcome. The last decade has seen a surge in rROP, primarily focused on creating degradable polymers. This pursuit has resulted in the creation of the first readily degradable materials through radical polymerization. Recent years have witnessed innovations in new monomers that address previous design limitations, such as ring strain and reactivity ratios. Furthermore, advances in integrating rROP with reversible deactivation radical polymerization (RDRP) have facilitated the incorporation of complex, customizable chemical payloads into the main polymer chain. This short review discusses the latest developments in monomer design with a focused analysis of their limitations in a broader historical context. Recently evolving strategies for compatibility of rROP monomers with RDRP are discussed, which are key to precision polymer synthesis. The latest chemistry surveyed expands the horizon beyond mere hydrolytic degradation. Now is the time to explore the chemical potential residing in the previously inaccessible polymer backbone.

Förster resonance energy transfer within single chain nanoparticles.

Single chain nanoparticles (SCNPs) are a highly versatile polymer architecture consisting of single polymer chains that are intramolecularly crosslinked. Currently, SCNPs are discussed as powerful macromolecular architectures for catalysis, delivery and sensors. Herein, we introduce a methodology based on Förster Resonance Energy Transfer (FRET) to evidence the folding of single polymer chains into SCNPs via fluorescence readout. We initially introduce a molecular FRET pair based on a bimane and nitrobenzoxadiazole (NBD) moiety and study its fluorescence properties in different solvents. We subsequently construct a low dispersity polymer chain carrying NBD units, while exploiting the bimane units for intramolecular chain collapse. Upon chain collapse and SCNP formation - thus bringing bimane and NBD units into close proximity - the SCNPs report their folded state by a strong and unambiguous FRET fluorescence signal. The herein introduced reporting of the folding state of SCNPs solely relies on an optical readout, opening avenues to monitoring SCNP folding without recourse to complex analytical methodologies.

Photochemical Action Plots Reveal Red-shifted Wavelength-dependent Photoproduct Distributions.

Photochemical action plots are a powerful tool for mapping photochemical reaction outcomes wavelength-by-wavelength. Typically, they map either the depletion of a reactant or the formation of a specific product as a function of wavelength. Herein, we exploit action plots to simultaneously map the formation of several photochemical products from a single chromophore. We demonstrate that the wavelength-resolved mapping of two reaction products formed during the irradiation of a chalcone species not only shows wavelength dependence - exhibiting the typical strong red-shift of the photochemical reactivity compared to the absorbance spectrum of the chromophore - but also a strong wavelength selectivity with remarkably different product distributions resulting from different irradiation wavelengths.

pH-Controlled Reversible Folding of Copolymers via Formation of ß-sheet Secondary Structures.

Protein functions are enabled by their perfectly arranged 3D structure, which is the result of a hierarchical intramolecular folding process. Sequence-defined polypeptide chains form locally ordered secondary structures (i.e., α-helix and ß-sheet) through hydrogen bonding between the backbone amides, shaping the overall tertiary structure. To generate similarly complex macromolecular architectures based on synthetic materials, a plethora of strategies have been developed to induce and control the folding of synthetic polymers. However, the degree of complexity of the structure-driving ensemble of interactions demonstrated by natural polymers is unreached, as synthesizing long sequence-defined polymers with functional backbones remains a challenge. Herein, we report the synthesis of hybrid peptide-N,N-Dimethylacrylamide copolymers via radical Ring-Opening Polymerization (rROP) of peptide containing macrocycles. The resulting synthetic polymers contain sequence-defined regions of ß-sheet encoding amino acid sequences. Exploiting the pH responsiveness of the embedded sequences, protonation or deprotonation in water induces self-assembly of the peptide strands at an intramacromolecular level, driving polymer chain folding via formation of ß-sheet secondary structures. We demonstrate that the folding behavior is sequence dependent and reversible.

Simultaneously recorded photochemical action plots reveal orthogonal reactivity.

We map the photochemical reactivity of two chromophores-a pyrene-chalcone and a methylene blue protected amine-from a one-pot reaction mixture based on their dynamic absorptivity changes upon light exposure, constructing a dual action plot. We employ the action plot data to determine a pathlength-independent λ-orthogonality window, allowing the orthogonal folding of distinct polymer chains into single chain nano-particles (SCNPs) from the same reaction mixture.

Peptide Self-Assembly Controlled Photoligation of Polymers.

Highly efficient chemical ligations that operate in water under mild conditions are the foundation of bioorthogonal chemistry. However, the toolbox of suitable reactions is limited. Conventional approaches to expand this toolbox aim at altering the inherent reactivity of functional groups to design new reactions that meet the required benchmarks. Inspired by controlled reaction environments that enzymes provide, we report a fundamentally different approach that makes inefficient reactions highly efficient within defined local environments. Contrasting enzymatically catalyzed reactions, the reactivity controlling self-assembled environment is brought about by the ligation targets themselves─avoiding the use of a catalyst. Targeting [2 + 2] photocycloadditions, which are inefficient at low concentrations and readily quenched by oxygen, short ß-sheet encoded peptide sequences are inserted between a hydrophobic photoreactive styrylpyrene unit and a hydrophilic polymer. In water, electrostatic repulsion of deprotonated amino acid residues governs the formation of small self-assembled structures, which enable a highly efficient photoligation of the polymer, reaching ∼90% ligation within 2 min (0.034 mM). Upon protonation at low pH, the self-assembly changes into 1D fibers, altering photophysical properties and shutting down the photocycloaddition reaction. Using the reversible morphology change, it is possible to switch the photoligation "ON" or "OFF" under constant irradiation simply by varying the pH. Importantly, in dimethylformamide, the photoligation reaction did not occur even at 10-fold higher concentrations (0.34 mM). The self-assembly into a specific architecture, encoded into the polymer ligation target, enables a highly efficient ligation that overcomes the concentration limitations and high oxygen sensitivity of [2 + 2] photocycloadditions.

Visible-Light-Induced Control over Reversible Single-Chain Nanoparticle Folding.

We introduce a class of single-chain nanoparticles (SCNPs) that respond to visible light (λmax =415 nm) with complete unfolding from their compact structure into linear chain analogues. The initial folding is achieved by a simple esterification reaction of the polymer backbone constituted of acrylic acid and polyethylene glycol carrying monomer units, introducing bimane moieties, which allow for the photochemical unfolding, reversing the ester-bond formation. The compaction and the light driven unfolding proceed cleanly and are readily followed by size exclusion chromatography (SEC) and diffusion ordered NMR spectroscopy (DOSY), monitoring the change in the hydrodynamic radius (RH ). Importantly, the folding reaction and the light-induced unfolding are reversible, supported by the high conversion of the photo cleavage. As the unfolding reaction occurs in aqueous systems, the system holds promise for controlling the unfolding of SCNPs in biological environments.

Ferrocene-driven single-chain polymer compaction.

We introduce single-chain nanoparticles (SCNPs) exclusively folded by covalently bonded ferrocene units. Specifially, we demonstrate the ability of 2-ferrocenyl-1,10-phenanthroline to fuse single-chain collapse with the concomitant introduction of a donor functionality allowing the installation of a Pd-catalytic site, affording the first heterobimetallic ferrocene-functionalized SCNP.

Embedding Peptides into Synthetic Polymers: Radical Ring-Opening Copolymerization of Cyclic Peptides.

Biopolymers such as proteins and nucleic acids are the key building blocks of life. Synthetic polymers have nevertheless revolutionized our everyday life through their robust synthetic accessibility. Combining the unmatched functionality of biopolymers with the robustness of tailorable synthetic polymers holds the promise to create materials that can be designed ad hoc for a wide array of applications. Radical polymerization is the most widely applied polymerization technique in both fundamental science and industrial polymer production. While this polymerization technique is robust and well controlled, it generally yields unfunctional all-carbon backbones. Combinations of natural polymers such as peptides, with synthetic polymers, are thus limited to tethering peptides onto the side chains or chain ends of the latter. This synthetic limitation is a critical restraint, considering that the function of biopolymers is programmed into the sequence of their main chain (i.e., primary structure). Here, we report the radical copolymerization of peptides and synthetic comonomers yielding synthetic polymers with defined peptide sequences embedded into their main chain. Key was the development of a solid-phase peptide synthesis (SPPS) approach to generate synthetic access to peptide conjugates containing allylic sulfides. Following cyclization, the obtained peptide monomers can be readily copolymerized with N,N-dimethylacrylamide (DMA)─controlled by reversible addition-fragmentation chain transfer (RAFT). Importantly, the developed synthetic strategy is compatible with all 20 standard amino acids and uses exclusively standard SPPS chemicals or chemicals accessible in one-step synthesis─prerequisite for widespread and universal application.

Two Functions from a Single Photoresist: Tuning Microstructure Degradability from Light-Stabilized Dynamic Materials.

A photoresist-based on a light-stabilized dynamic material driven by an out-of-equilibrium photo-Diels-Alder reaction of triazolinediones with naphthalenes-whose ability to intrinsically degrade postprinting can be tuned by a simple adjustment of laser intensity during 3D laser lithography is introduced. The resist's ability to form stable networks under green light irradiation that degrade in the dark is transformed into a tunable degradable 3D printing material platform. In-depth characterization of the printed microstructures via atomic force microscopy before and during degradation reveals the high dependency of the final structures' properties on the writing parameters. Upon identifying the ideal writing parameters and their effect on the network structure, it is possible to selectively toggle between stable and fully degradable structures. This simplifies the direct laser writing manufacturing process of multifunctional materials significantly, which typically requires the use of separate resists and consecutive writing efforts to achieve degradable and nondegradable material sections.

Programming Photodegradability into Vinylic Polymers via Radical Ring-Opening Polymerization.

Incorporation of photolabile moieties into the polymer backbone holds promise to remotely-control polymer degradation. However, suitable synthetic avenues are limited, especially for radical polymerizations. Here we report a strategy to program photodegradability into vinylic polymers by exploiting the wavelength selectivity of photocycloadditions for radical ring-opening polymerization (rROP). Irradiation of coumarin terminated allylic sulfides with UVA light initiated intramolecular [2+2] photocycloaddition producing cyclic macromonomers. Subsequent RAFT-mediated rROP with methyl acrylate yielded copolymers that inherited the photoreactivity of the cyclic parent monomer. Irradiation with UVB initiated efficient photocycloreversion of the coumarin dimers, causing polymer degradation within minutes under UVB light or days under sunlight exposure. Our synthetic strategy may pave the way to insert photolabile linkages into vinylic polymers, tuning degradation for specific wavelengths.

Red light induced folding of single polymer chains.

We pioneer the photochemical generation of single chain nanoparticles (SCNPs) at the to-date mildest reported wavelength of 625 nm by exploiting the photochemical uncaging of methylene blue protected amines. The protected amines are tethered to polymers prepared via reversible addition-fragmentation chain transfer (RAFT) polymerisation, and subsequently undergo intrachain crosslinking by amide formation.

Photostationary State in Dynamic Covalent Networks.

We explore a cross-linked polymer network based on a visible light photodynamic [2 + 2] cycloaddition driven by styrylpyrene chemistry. Based on a polymer backbone with pendent styrylpyrene units, the network can be formed by using λ = 450 nm irradiation. Upon irradiation with λ = 340 nm, a photostationary state is generated within the network with ∼17% of the styrylpyrene units open compared to close to 2% in the visible light cured state. The limited fraction of open [2 + 2] couples is caused by their proximity and is in sharp contrast to solution experiments on the photoreactive moiety. Thus, the polymer network retains its mechanical properties even at the photostationary point. We hypothesize that the application of an additional stimulus could serve as a second gate for inducing network disintegration by spacing the [2 + 2] units during ultraviolet irradiation.

Green light enabled Staudinger-Bertozzi ligation.

We introduce a visible light-induced Staudinger-Bertozzi ligation via photo-uncaging of a triphenylphosphine moiety with a photolabile coumarin derivative. Our action plot study examines the conversion as the function of wavelength, revealing that the uncaging process and Staudinger reaction can be triggered by green light (λ < 550 nm). We further demonstrate the applicability of our approach in materials science via endgroup modification of water soluble poly(ethylene glycol) and green light-induced patterning of a solid substrate.

Orange-Light-Induced Photochemistry Gated by pH and Confined Environments.

We introduce a new photochemically active compound, i.e., pyridinepyrene (PyPy), entailing a pH-active moiety that effects a significant halochromic shift into orange-light (λ = 590 nm) activatable photoreactivity while concomitantly exerting control over its reaction pathways. With blue light (λ = 450 nm) in neutral to basic pH, a [2 + 2] photocycloaddition can be triggered to form a cyclobutene ring in a reversible fashion. If the pH is decreased to acidic conditions, resulting in a halochromic absorption shift, photocycloaddition on the small-molecule level is blocked due to repulsive interactions and exclusive trans-cis isomerization is observed. Through implementation of PyPy into the confined environment of a single-chain nanoparticle (SCNP) design, one can overcome the repulsive forces and exploit the halochromic shift for orange light (λ = 590 nm)-induced cycloaddition and formation of macromolecular three-dimensional (3D) architectures.

Action Plots in Action: In-Depth Insights into Photochemical Reactivity.

Predicting wavelength-dependent photochemical reactivity is challenging. Herein, we revive the well-established tool of measuring action spectra and adapt the technique to map wavelength-resolved covalent bond formation and cleavage in what we term "photochemical action plots". Underpinned by tunable lasers, which allow excitation of molecules with near-perfect wavelength precision, the photoinduced reactivity of several reaction classes have been mapped in detail. These include photoinduced cycloadditions and bond formation based on photochemically generated o-quinodimethanes and 1,3-dipoles such as nitrile imines as well as radical photoinitiator cleavage. Organized by reaction class, these data demonstrate that UV/vis spectra fail to act as a predictor for photochemical reactivity at a given wavelength in most of the examined reactions, with the photochemical reactivity being strongly red shifted in comparison to the absorption spectrum. We provide an encompassing perspective of the power of photochemical action plots for bond-forming reactions and their emerging applications in the design of wavelength-selective photoresists and photoresponsive soft-matter materials.

Wavelength-Selective Softening of Hydrogel Networks.

Photoresponsive hydrogels hold key potential in advanced biomedical applications including tissue engineering, regenerative medicine, and drug delivery, as well as intricately engineered functions such as biosensing, soft robotics, and bioelectronics. Herein, the wavelength-dependent degradation of bio-orthogonal poly(ethylene glycol) hydrogels is reported, using three selective activation levels. Specifically, three chromophores are exploited, that is, ortho-nitrobenzene, dimethyl aminobenzene, and bimane, each absorbing light at different wavelengths. By examining their photochemical action plots, the wavelength-dependent reactivity of the photocleavable moieties is determined. The wavelength-selective addressability of individual photoreactive units is subsequently translated into hydrogel design, enabling wavelength-dependent cleavage of the hydrogel networks on-demand. Critically, this platform technology allows for the fabrication of various hydrogels, whose mechanical properties can be fine-tuned using different colors of light to reach a predefined value, according to the chromophore ratios used. The softening is shown to influence the spreading of pre-osteoblastic cells adhering to the gels as a demonstration of their potential utility. Furthermore, the materials and photodegradation processes are non-toxic to cells, making this platform attractive for biomaterials engineering.

Computational prediction of the molecular configuration of three-dimensional network polymers.

The three-dimensional arrangement of natural and synthetic network materials determines their application range. Control over the real-time incorporation of each building block and functional group is desired to regulate the macroscopic properties of the material from the molecular level onwards. Here we report an approach combining kinetic Monte Carlo and molecular dynamics simulations that chemically and physically predicts the interactions between building blocks in time and in space for the entire formation process of three-dimensional networks. This framework takes into account variations in inter- and intramolecular chemical reactivity, diffusivity, segmental compositions, branch/network point locations and defects. From the kinetic and three-dimensional structural information gathered, we construct structure-property relationships based on molecular descriptors such as pore size or dangling chain distribution and differentiate ideal from non-ideal structural elements. We validate such relationships by synthesizing organosilica, epoxy-amine and Diels-Alder networks with tailored properties and functions, further demonstrating the broad applicability of the platform.

Modular functionalization and hydrogel formation via red-shifted and self-reporting [2+2] cycloadditions.

We present a modularly applicable, red-shifted and self-reporting photodynamic covalent crosslinker, abbreviated qStyPy, that performs [2+2] cycloadditions upon irradiation with 470 nm in water. The rational design of qStyPy increases its hydrophilicity due to a permanent charge and features a broad emission in the far-red/near-infrared regime as a readout for the cycloadduct formation, rendering qStyPy suitable for biomedical applications.