RESUMO
Diclofenac (DCF) is an environmentally persistent, nonsteroidal anti-inflammatory drug (NSAID) with thyroid disrupting properties. Electrochemical advanced oxidation processes (eAOPs) can efficiently remove NSAIDs from wastewater. However, eAOPs can generate transformation products (TPs) with unknown chemical and biological characteristics. In this study, DCF was electrochemically degraded using a boron-doped diamond anode. Ultra-high performance liquid chromatography coupled with high-resolution mass spectrometry was used to analyze the TPs of DCF and elucidate its potential degradation pathways. The biological impact of DCF and its TPs was evaluated using the Xenopus Eleutheroembryo Thyroid Assay, employing a transgenic amphibian model to assess thyroid axis activity. As DCF degradation progressed, in vivo thyroid activity transitioned from anti-thyroid in non-treated samples to pro-thyroid in intermediately treated samples, implying the emergence of thyroid-active TPs with distinct modes of action compared to DCF. Molecular docking analysis revealed that certain TPs bind to the thyroid receptor, potentially triggering thyroid hormone-like responses. Moreover, acute toxicity occurred in intermediately degraded samples, indicating the generation of TPs exhibiting higher toxicity than DCF. Both acute toxicity and thyroid effects were mitigated with a prolonged degradation time. This study highlights the importance of integrating in vivo bioassays in the environmental risk assessment of novel degradation processes.
Assuntos
Anti-Inflamatórios não Esteroides , Diclofenaco , Glândula Tireoide , Poluentes Químicos da Água , Animais , Diclofenaco/toxicidade , Diclofenaco/química , Diclofenaco/metabolismo , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/química , Glândula Tireoide/efeitos dos fármacos , Glândula Tireoide/metabolismo , Anti-Inflamatórios não Esteroides/toxicidade , Anti-Inflamatórios não Esteroides/química , Medição de Risco , Técnicas Eletroquímicas , Simulação de Acoplamento Molecular , Disruptores Endócrinos/toxicidade , Disruptores Endócrinos/química , Disruptores Endócrinos/metabolismo , Xenopus laevis , Diamante/química , Oxirredução , Boro/toxicidade , Boro/químicaRESUMO
Water electrolysis is among the recent alternatives for generating clean fuels (hydrogen). It is an efficient way to produce pure hydrogen at a rapid pace with no unwanted by-products. Effective and cheap water-splitting electrocatalysts with enhanced activity, specificity, and stability are currently widely studied. In this regard, noble metal-free transition metal-based catalysts are of high interest. Iron sulfide (FeS) is one of the essential electrocatalysts for water splitting because of its unique structural and electrochemical features. This article discusses the significance of FeS and its nanocomposites as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), and overall water splitting. FeS and its nanocomposites have been studied also for energy storage in the form of electrode materials in supercapacitors and lithium- (LIBs) and sodium-ion batteries (SIBs). The structural and electrochemical characteristics of FeS and its nanocomposites, as well as the synthesis processes, are discussed in this work. This discussion correlates these features with the requirements for electrocatalysts in overall water splitting and its associated reactions. As a result, this study provides a road map for researchers seeking economically viable, environmentally friendly, and efficient electrochemical materials in the fields of green energy production and storage.
RESUMO
In this work, different ratios of palladium - cerium oxide (Pd/CeO2) catalyst were synthesized and characterized, while their sonocatalytic activity was evaluated for the degradation of the xenobiotic Bisphenol A (BPA) from aqueous solutions. Sonocatalytic activity expressed as BPA decomposition exhibited a volcano-type behavior in relation to the Pd loading, and the 0.25Pd/CeO2 catalyst characterized by the maximum Pd dispersion and lower crystallite size demonstrated the higher activity. Using 500 mg/L of 0.25 % Pd/CeO2 increased the kinetic constant for BPA destruction by more than two times compared to sonolysis alone (20 kHz at 71 W/L). Meanwhile, the simultaneous use of ultrasound and a catalyst enhanced the efficiency by 50.1 % compared to the sum of the individual processes, resulting in 95 % BPA degradation in 60 min. The sonocatalytic degradation of BPA followed pseudo-first-order kinetics, and the apparent kinetic constant was increased with ultrasound power and catalyst loading, while the efficiency was decreased in bottled water and secondary effluent. From the experiments that were conducted using appropriate scavengers, it was revealed that the degradation mainly occurred on the bubble/liquid interface of the formed cavities, while the reactive species produced from the thermal or light excitation of the prepared semiconductor also participated in the reaction. Five first-stage and four late-stage transformation products were identified using UHPLC/TOF-MS, and a pathway for the sonocatalytic degradation of BPA was proposed. According to ECOSAR software prediction, most transformation by-products (TBPs) present lower ecotoxicity than the parent compound, although some remain toxic to the indicators chosen.
RESUMO
The existence of the artificial sweetener acesulfame (ACE) in quantities of significance can negatively impact water quality, and its consumption has been associated with deleterious health effects. The present investigation explores the efficacy of heat-activated sodium persulfate (SPS) for eliminating ACE. The complete degradation of 0.50 mg L-1 of ACE was achieved within 45 min under a reaction temperature of 50 °C and 100 mg L-1 of SPS. The impact of thermal decomposition on ACE at a temperature of 60 °C was negligible. This study considers several factors, such as the SPS and ACE loading, the reaction temperature, the initial pH, and the water matrix of the reactor. The results indicate that the method's efficiency is positively correlated with higher initial concentrations of SPS, whereas it is inversely associated with the initial concentration of ACE. Furthermore, higher reaction temperatures and acidic initial pH levels promote the degradation of acesulfame. At the same time, certain constituents of the water matrix, such as humic acid, chlorides, and bicarbonates, can hinder the degradation process. Additionally, the data from LC-QToF-MS analysis of the samples were used to investigate transformation through suspect and non-target screening approaches. Overall, ACE's eight transformation products (TPs) were detected, and a potential ACE decomposition pathway was proposed. The concentration of TPs followed a volcano curve, decreasing in long treatment times. The ecotoxicity of ACE and its identified TPs was predicted using the ECOSAR software. The majority of TPs exhibited not harmful values.
Assuntos
Compostos de Sódio , Sulfatos , Poluentes Químicos da Água , Oxirredução , Poluentes Químicos da Água/análise , Temperatura Alta , Temperatura , Cinética , Edulcorantes/toxicidade , Edulcorantes/análiseRESUMO
Conventional water treatment methods are not efficient in eliminating endocrine disrupting compounds (EDCs) in wastewater. Electrochemical Advanced Oxidation Processes (eAOPs) offer a promising alternative, as they electro-generate highly reactive species that oxidize EDCs. However, these processes produce a wide spectrum of transformation products (TPs) with unknown chemical and biological properties. Therefore, a comprehensive chemical and biological evaluation of these remediation technologies is necessary before they can be safely applied in real-life situations. In this study, 17α-ethinylestradiol (EE2), a persistent estrogen, was electrochemically degraded using a boron doped diamond anode with sodium sulfate (Na2SO4) and sodium chloride (NaCl) as supporting electrolytes. Ultra-high performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry was used for the quantification of EE2 and the identification of TPs. Estrogenic activity was assessed using a transgenic medaka fish line. At optimal operating conditions, EE2 removal reached over 99.9% after 120 min and 2 min, using Na2SO4 and NaCl, respectively. The combined EE2 quantification and in vivo estrogenic assessment demonstrated the overall estrogenic activity was consistently reduced with the degradation of EE2, but not completely eradicated. The identification and time monitoring of TPs showed that the radical agents readily oxidized the phenolic A-ring of EE2, leading to the generation of hydroxylated and/or halogenated TPs and ring-opening products. eAOP revealed to be a promising technique for the removal of EE2 from water. However, caution should be exercised with respect to the generation of potentially toxic TPs.
Assuntos
Disruptores Endócrinos , Poluentes Químicos da Água , Animais , Etinilestradiol/análise , Etinilestradiol/química , Etinilestradiol/metabolismo , Cloreto de Sódio , Poluentes Químicos da Água/análise , Estrona , Águas Residuárias , Disruptores Endócrinos/análiseRESUMO
Sonochemical oxidation was employed for the degradation of the drug dexamethasone (Dex). The oxidation at 20 kHz followed pseudo-first-order kinetics and increased with applied ultrasound power density. Acoustic cavitation at 71 W/L was able to eliminate 500 µg/L of dexamethasone from ultrapure water at inherent pH in less than 60 min. The oxidation was enhanced at pH 3 and decreased at increased Dex concentration. Scavenging experiments with tert-butanol showed that hydroxyl radicals play a crucial role in decomposition, where the reaction mainly occurs on the gas-liquid interface of the formed cavities. The addition of chloride did not affect Dex removal, while in the presence of 10 mg/L of humic acid or bicarbonate, the apparent kinetic constant decreased from 0.0423 ± 0.004 min-1 to about 0.03 ± 0.002 min-1. The rate in secondary effluent was 3.3 times lower than in ultrapure water due to the complexity of the actual matrix. Six transformation products were identified via high resolution LC-MS during the sonochemical oxidation of 3 mg/L Dex in ultrapure water. The presence of polyethylene or polystyrene microplastics slightly enhanced DEX sonodegradation. The effect of ultrasound irradiation at 71 W/L for 60 min on the microplastics surfaces was inconsiderable.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Microplásticos , Plásticos , Poluentes Químicos da Água/química , Água/química , Oxirredução , Dexametasona , CinéticaRESUMO
Raw printing ink wastewater (PIW) was treated with various inorganic coagulants and organic flocculants (anionic and cationic polyacrylamides). These processes were also examined as post treatment step following hydrodynamic cavitation. Treatment effectiveness was assessed through color, chemical oxygen demand (COD) and total suspended solids (TSS) removal. The addition of 4500 mg L-1 polyaluminum chloride coagulant in undiluted PIW (COD: 17000 mg L-1) resulted in 99% color removal, 96% COD and TSS removal, after settling for 2 h. The addition of 10 mg L-1 of anionic polyacrylamides in the sample reduced settling time to only 5 min, with concomitant 96-98% removal efficiency. The addition of a 4 min hydrodynamic cavitation pretreatment step reduced coagulant addition by 33%, for the treatment of undiluted PIW (with 10 mg L-1 anionic polyacrylamide), while removals were ranged between 96 and 98%. Economic analysis for the undiluted PIW showed that costs were reduced by ca. 20% with the hydrodynamic cavitation pretreatment step. Moreover, sludge characterization showed the presence of maghemite, aluminum chloride and potassium aluminum silicate. Finally, toxicity tests revealed a significant attenuation of the toxic potential of undiluted PIW, thus indicating the enhanced efficiency of the proposed combined process (hydrodynamic cavitation and coagulation/flocculation).
Assuntos
Eliminação de Resíduos Líquidos , Purificação da Água , Ânions , Floculação , Hidrodinâmica , Tinta , Impressão Tridimensional , Eliminação de Resíduos Líquidos/métodos , Águas Residuárias/químicaRESUMO
The heat-activated persulfate system showed encouraging results for the destruction of the widely used antibiotic Ampicillin (AMP). AMP removal follows exponential decay, and the observed kinetic constant was enhanced with persulfate (PS) dosage at the range 50-500 mg L-1 and temperature (40-60 °C), while AMP thermolysis at 60 °C was almost negligible. The apparent activation energy was estimated to 124.7 kJ mol-1. Alkaline conditions, water matrix constituents like bicarbonates, humic acid, and real water matrices retarded AMP oxidation. Experiments performed with tert-butanol and methanol as scavengers demonstrated the contribution of sulfate radicals as the dominant reactive species. Seven transformation products (TPs) of AMP have been identified from AMP destruction. An EC50 value equal to 187 mg L-1 was calculated for 72 h of exposure of the microalgae Chlorella sorokiniana to AMP. According to the ecotoxicity experiments that conducted after treatment of AMP with PS for different reaction times, no important inhibition of microalgae was noticed for contact time of 72 h and 10 d. These results indicate the formation of no toxic AMP by-products for the applied experimental conditions.
Assuntos
Chlorella , Poluentes Químicos da Água , Ampicilina/toxicidade , Cinética , Oxirredução , Sulfatos , Água , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/toxicidadeRESUMO
This work is a critical review of the most important studies that have dealt with heat-activated persulfate to degrade persistent micropollutants in the last six years. The effect of the different operating parameters is discussed, wherein in all cases, the efficiency was favored at higher temperatures and oxidant concentrations. Particular emphasis was given to the effect of the aqueous matrix. Since heat activation is a homogeneous process based on the production of free radicals, in most of the studies presented, the removal of pollutants decreases as the complexity of the aqueous matrix increases except in cases where secondary oxidative species are produced that are selective with specific pollutants. It has also been observed that the change in toxicity usually follows the removal of the parent compound despite the formation of several by-products. Nowadays, combining different processes for the simultaneous activation of persulfate seems to be gaining ground. A hybrid process is an interesting strategy to reduce costs and increase efficiency, especially in real wastewater. In this light, the most interesting studies of hybrid systems for the destruction of micropollutants in recent years based on thermally activated persulfate are also summarized. Finally, some steps are proposed for future research towards the industrial application, including the study of chemical mixtures, the integrated toxicity assessment, the examination of simultaneous disinfection and decomposition of pollutants into real wastewater, the estimation of the required costs, and energy the combination of processes and their coupling with renewable sources, and the design of pilot plants and the scale-up of the hybrid processes.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Temperatura Alta , Oxirredução , Águas Residuárias/química , Água , Poluentes Químicos da Água/químicaRESUMO
Printing ink wastewater (PIW) carries a heavy load of pollutants, the composition of which makes treatment difficult, especially when trying to minimize the pollution load. According to the latter, the present study aims to investigate PIW treatment with different various methods and to determine the maximum color, COD (chemical oxygen demand) and TSS (total suspended solids) removal. First, hydrodynamic cavitation (HC) was tested and the effect of hydrogen peroxide dosage (0-10 g L-1), and pH (3, 5, 8, 10) was examined concerning the removal of PIW initial COD concentrations 4000 and 8000 mg L-1. Removal was high (more than 81%) only at pH 5 in HC reactor. The second method involved treatment with separate pH fixation of the undiluted PIW (COD 17000 mg L-1, actual pH 8 ± 0.2). This treatment, maximized removals, reaching reduction of the initial values more than 91%, at pH 5. Finally, PIW was treated with a combination of the above methods, leading to 93-97% removals for 8000 mg L-1 PIW treatment and 97-99% for 17000 mg L-1 PIW respectively. Process cost calculations showed that the latter method is an effective and affordable treatment method for PIW streams, while toxicity tests of the treated PIW showed substantial toxicity reduction.
Assuntos
Tinta , Poluentes Químicos da Água , Purificação da Água , Hidrodinâmica , Peróxido de Hidrogênio/química , Concentração de Íons de Hidrogênio , Eliminação de Resíduos Líquidos/métodos , Águas Residuárias , Purificação da Água/métodosRESUMO
Recent studies have shown the widespread occurrence of microplastics in multiple environmental compartments. When discharged into the aquatic environment, microplastics interact with other chemicals acting as vectors of organic and inorganic micropollutants. In the present study, we examined the sorption of two commonly used antihypertensive drugs, valsartan (VAL) and losartan (LOS), onto polystyrene (PS) microplastics and we studied the effects of water matrix, solution's pH, salinity, and microplastics' aging on their sorption. According to the results, the sorption of VAL and LOS onto PS is a slow process that reaches equilibrium after 12 days. The sorption of both target micropollutants was pH-dependent and significantly decreased under alkaline conditions. The removal of VAL was enhanced in the presence of 100 mM of Ca2+ while no statistical significant effects were observed when Na+ was added. The increase of salinity either did not affect or decreased the removal of LOS. Lower sorption of both drugs was observed when aged PS was used despite that the specific surface area for aged PS was 39% higher than pristine. Calculation of the sorption distribution coefficient (Kd) for different water matrices showed that the increase of matrix complexity inhibited target compounds' removal and the sorption rate decreased from bottled water > river water ≈ treated wastewater for the two compounds. For VAL, the Kd values ranged between 795 ± 63 L/kg (bottled water) and 384 ± 88 L/kg (river water), while for LOS between 4453 ± 417 L/kg (bottled water) and 3078 ± 716 L/kg (treated wastewater). Both VAL and LOS sorption onto PS microplastics can be described by hydrophobic and electrostatic interactions. The current results indicate that PS particles could affect the transportation of antihypertensive drugs in the aquatic environment causing potential adverse effects on the environment and public health.
Assuntos
Água Potável , Poluentes Químicos da Água , Adsorção , Anti-Hipertensivos , Microplásticos , Plásticos/química , Poliestirenos/química , Águas Residuárias , Poluentes Químicos da Água/análiseRESUMO
Printing ink wastewater from printing facilities is difficult to treat because of its heavy pollutant load (chemical oxygen demand - COD, color and total suspended solids - TSS). In this study undiluted printing ink wastewater with high COD (i.e., 20,000 mgL-1) was treated using a highly efficient, continuous flow electrocoagulation reactor with aluminum electrodes. The parameters investigated were: initial COD concentration (4000, 10,000 and 20,000 mgL-1), current density (21, 42 and 83 mAcm-2), and inlet flow rate (6, 8 and 10 mLmin-1). All parameters showed great efficiency in terms of pollutant removal for diluted printing ink wastewater. For undiluted printing ink wastewater treatment, COD, color, and TSS removal were maximized at 6 mLmin-1 flow rate reaching 82%, 98%, and 85% COD, color, and TSS removal, respectively, by applying the lower tested current density 21 mAcm-2. COD, color and TSS removal increased with increasing current density. For undiluted printing ink wastewater and a flow rate of 8 mLmin-1, COD removal was between 42 and 88%, color reduction between 85 and 99%, and TSS reduction between 83 and 98% when the applied current was increased (from 21 to 83 mAcm-2). Lower pollutant removal was observed at the highest flow rate of 10 mLmin-1 for all current densities tested. Process cost calculations in terms of electrical energy, electrode material consumption and sludge disposal, showed that the use of continuous flow electrocoagulation reactor (with flow rate 6 mLmin-1, and at 21 mAcm-2) is an affordable and effective treatment method for printing ink wastewater streams with very high COD. Sludge characterization showed Al-silicate-rich sludge. Particle sizes increased after treatment and Cu and Ti were detected in the sludge. A post-treatment stage is necessary before discharging effluent into water bodies.
Assuntos
Poluentes Ambientais , Tinta , Águas Residuárias , Eletrocoagulação/métodos , Eletrodos , Esgotos , Eliminação de Resíduos Líquidos/métodosRESUMO
A pilot-scale hydrodynamic cavitation (HC) system followed by sedimentation (SED) was used for the decolorization of 5 industrial-grade inks, a fluid containing a mixture of the five industrial grade inks (MIX) and printing ink wastewater (PIW). The pilot scale HC reactor combines a Venturi tube with a 31 holes orifice plate accommodated in the vena-contracta of Venturi. The study aimed to define optimal operating conditions, i.e., hydrogen peroxide concentration (H2O2), pH and combined HC/SED treatment time, to achieve decolorization and reduce HC operation time. Under the optimal conditions at the proposed HC/SED system, color removal reached 92%, 91%, 90%,98% and 90%, for black, red, yellow, cyan, and green ink respectively (at pH 8 without H2O2 addition). In the same system, color removal for PIW was 92%, whereas for MIX decolorization reached more than 90% for all the wavelengths in the selected spectrum 300-700 nm at HC/SED system (at pH 8 and 1 g L-1 hydrogen peroxide). The suspended particles were characterized by measurements of the particle size distribution and of the respective zeta potential. The equivalent cavitation yields, electric energy consumption and operating costs were calculated. The present work's results suggested that HC combined with sedimentation has a great potential for real applications and is superior compared to other technologies (i.e., H2O2 alone, sedimentation alone or even HC with or without H2O).
Assuntos
Tinta , Águas Residuárias , Hidrodinâmica , Peróxido de Hidrogênio , Impressão TridimensionalRESUMO
In this study, the oxidative degradation of losartan (LOS), a widely administered medicine for high blood pressure by heat-activated persulfate was investigated. Increased temperature and persulfate concentration, as well as acidic conditions enhance the degradation efficiency of LOS, whose rate follows pseudo-first order kinetics. From the respective apparent rate constants in the range 40-60 °C, an apparent activation energy of 112.70 kJ/mol was computed. Radical scavenging tests demonstrated that both HO⢠and [Formula: see text] contribute towards LOS degradation. LOS degradation was suppressed in real water matrices including bottled water (BW) and secondary wastewater effluent (WW), while other experiments indicated that the presence of bicarbonates and humic acid negatively affected its oxidation. Instead, the addition of chloride ions at 250 mg/L resulted in a positive effect on LOS removal. The combination of heat-activated PS with low-frequency ultrasound exhibited a synergistic effect, with the ratio S being 2.29 in BW and 1.52 in WW. Five transformation products of LOS were identified through HRMS suspect and non-target screening approaches, among which two are reported for the first time. Using the in-house risk assessment program, ToxTrAMs was revealed that most of the identified TPs present higher toxicity than LOS against Daphnia magna.
Assuntos
Água Potável , Preparações Farmacêuticas , Poluentes Químicos da Água , Temperatura Alta , Cinética , Losartan , Oxirredução , Sulfatos , Poluentes Químicos da Água/análiseRESUMO
Wastewater-based epidemiology (WBE) has a long history of identifying a variety of viruses from poliovirus to coronaviruses, including novel Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The presence and detection of SARS-CoV-2 in human feces and its passage into the water bodies are significant public health challenges. Hence, the hot issue of WBE of SARS-CoV-2 in the coronavirus respiratory disease (COVID-19) pandemic is a matter of utmost importance (e.g., SARS-CoV-1). The present review discusses the background, state of the art, actual status, and prospects of WBE, as well as the detection and quantification protocols of SARS-CoV-2 in wastewater. The SARS-CoV-2 detection studies have been performed in different water matrixes such as influent and effluent of wastewater treatment plants, suburban pumping stations, hospital wastewater, and sewer networks around the globe except for Antarctica. The findings revealed that all WBE studies were in accordance with clinical and epidemiological data, which correlates the presence of SARS-CoV-2 ribonucleic acid (RNA) with the number of new daily positive cases officially reported. This last was confirmed via Reverse Transcriptase-quantitative Polymerase Chain Reaction (RT-qPCR) testing which unfortunately is not suitable for real-time surveillance. In addition, WBE concept may act as a faster protocol to alert the public health authorities to take administrative orders (possible re-emerging infections) due to the impracticality of testing all citizens in a short time with limited diagnostic facilities. A comprehensive and integrated review covering all steps starting from sampling to molecular detection of SARS-CoV-2 in wastewater has been made to guide for the development well-defined and reliable protocols.
RESUMO
A novel pilot-scale hydrodynamic cavitation (HC) reactor was used to decolorize industrial-grade dye solutions and printing ink wastewater (PIW). The effect of the orifice plate geometry (1 hole plate of 1 mm and 2 mm in diameter, 31 holes of 1 mm and 2 mm in diameter, 62 holes of 1 mm and 2 mm in diameter), inlet pressure (4, 5 bar), initial dye concentration (0.3 and 0.6 OD), and the synergistic effect of HC and hydrogen peroxide concentration (0.0, 0.5, 1.0, 2.0 g/L) were investigated. The results showed that the highest color removal was obtained using 31 holes orifice plate of 2 mm holes' diameter, at 4 bar inlet pressure. Furthermore, although HC could not degrade completely all the industrial-grade dyes, efficiency was enhanced in the presence of H2O2. The optimum concentration of hydrogen peroxide was 1.0 g/L regardless of the initial concentration of the dyes studied. Under optimum operating conditions, color removal reached up to 68% for black, 39% for red, 43% for yellow, 55% for green, and 51% for cyan dye, while color removal in the PIW reached only 15%. The black dye solution presented almost 100% COD removal, while 38%, 25%, 67%, and 78% COD removal values were obtained for the red, yellow, cyan and green dyes, respectively. 55% COD removal was recorded from the PIW. Concerning cavitation yields, black, red, yellow, green, cyan dye yields reached 2.5E(-7), 1.1E(-7), 1.5E(-7), 2.0E(-7), 1.7E(-7) ODâ L/J, respectively, while PIW yield was 6.3E(-8) ODâ L/J. The present study demonstrates that HC combined with green oxidants such as hydrogen peroxide could be an alternative treatment approach for real industrial wastewater streams. However, a combination with a post-treatment method should be applied to maximize both color and COD removal.
Assuntos
Hidrodinâmica , Águas Residuárias , Corantes , Peróxido de Hidrogênio , Concentração de Íons de Hidrogênio , TintaRESUMO
The photocatalytic activity of bismuth oxychloride (BiOCl) toward sulfamethoxazole (SMX) elimination was investigated. BiOCl was synthesized according to a simple method using thiourea. Its physicochemical characteristics were determined by nitrogen physisorption, X-Ray diffraction, diffuse reflectance spectroscopy, scanning electron microscopy and transmission electron microscopy. Simulated solar irradiation and 1 g/L BiOCl, could effectively remove 0.5 mg/L SMX in less than 90 min. An increase in SMX concentration from 0.25 mg/L to 4 mg/L decreased the observed kinetic constant. Concerning the pH effect, it was found that under alkaline conditions SMX removal was slightly hindered. The water matrix's influence on SMX removal was explored, carrying out experiments in real water matrices, (bottled water (BW) and secondary effluent (WW)). Interestingly SMX removal was not practically altered in WW secondary effluent, but it was slightly hindered in BW bottled water. Experiments, performed in synthetic matrices, revealed that the presence of bicarbonates and chlorides slightly slowed down degradation kinetics, while humic acid enhanced SMX removal at concentrations up to 10 mg/L. Finally, an enhancement on SMX degradation was observed in the presence of persulfate. Quenching experiments of potential reactive species revealed that SMX degradation takes place mainly through reaction with hydroxyl radicals and photogenerated electrons.
Assuntos
Sulfametoxazol , Poluentes Químicos da Água , Bismuto , Catálise , Águas Residuárias , ÁguaRESUMO
In the present study, biochar from spent coffee grounds was synthesized via pyrolysis at 850 °C for 1 h, characterized and employed as catalyst for the degradation of sulfamethoxazole (SMX) by persulfate activation. A variety of techniques, such as physisorption of N2, scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and potentiometric mass titration, were employed for biochar characterization. The biochar has a surface area of 492 m2/g, its point of zero charge is 6.9, while mineral deposits are limited. SMX degradation experiments were performed mainly in ultrapure water (UPW) at persulfate concentrations between 100 and 1000 mg/L, biochar concentrations between 50 and 200 mg/L, SMX concentrations between 500 and 2000 µg/L and initial solution pH between 3 and 10. Real matrices, besides UPW, were also tested, namely bottled water (BW) and treated wastewater (WW), while synthetic solutions were prepared spiking UPW with bicarbonate, chloride, humic acid or alcohols. Almost complete removal of SMX can be achieved using 200 mg/L biochar and 1000 mg/L sodium persulfate (SPS) within 75 min. The presence of biochar is important for the degradation process, while the activity of the biochar increases linearly with SPS concentration. Degradation follows a pseudo-order kinetic model and the rate increases with increasing biochar concentration and decreasing SMX concentration. Although SMX adsorption onto the biochar surface is favored at acidic conditions, degradation proceeds equally fast regardless of the initial solution pH. Reactions in either real matrix are slower, resulting in 55% SMX removal in 60 min for WW. Bicarbonate causes severe inhibition as only 45% of SMX can be removed within 75 min in UPW. The addition of alcohol slightly inhibits degradation suggesting that the reaction pathway is either under electron transfer control or due to the generation of surface oxygen radicals with higher oxidation potential than the homogeneously produced radicals.
Assuntos
Poluentes Químicos da Água/análise , Purificação da Água , Carvão Vegetal , Café , Sulfametoxazol/análiseRESUMO
Different pre-conditioning treatments were evaluated in order to stabilize red mud, a waste product from bauxite processing, for obtaining heterogeneous catalysts (named as B1-B3) that can be employed as suitable activators of sodium persulfate (SPS) for the degradation of sulfamethoxazole (SMX), a model antibiotic, in water. The presence of Fe3O4 in the composition of the catalysts was found to be a key factor for a suitable activation of SPS, according to the XPS measurements. The oxidation of SMX was successfully fitted to a pseudo-first-order kinetic model (r2 > 0.96), obtaining a 68% removal after 180 min when 0.8 mg/L of SMX was oxidized with 2 g/L of SPS and 2 g/L of catalyst B3. The presence of organic and/or inorganic constituents in the water matrix significantly hindered the degradation rate of SMX, the apparent kinetic constants being from 2 to 3 times lower than that determined in ultrapure water test. The use of ultrasound irradiation coupled to the addition of B3 catalyst improved importantly the SMX oxidation in real aqueous matrices, thus attaining values of removal which almost triplicated the ones obtained in absence of ultrasounds.