Elastase-induced saccular aneurysms in rabbits: comparison of geometric features with those of human aneurysms.

BACKGROUND AND PURPOSE: The development of more effective intracranial aneurysm therapy depends on the ability to test various intravascular occlusion devices and techniques in preclinical animal models. This requires the creation of experimental aneurysms, which, ideally, should mimic the size and geometric features of human intracranial aneurysms. The purpose of this study was to characterize the morphologic features of elastase-induced saccular aneurysms in rabbits to determine whether the morphology of such aneurysms mimics that of human intracranial aneurysms. METHODS: Elastase-induced saccular aneurysms were created in 40 New Zealand white rabbits. Intravenous digital subtraction angiography was performed 14 days after surgery. Relative to an external sizing device, the following dimensions were determined: aneurysm dome (height and width), aneurysm neck diameter, and parent artery diameter. Based on maximal diameter, aneurysms were categorized as small (2.0-4.9 mm), medium-sized (5.0-9.9 mm), or large (10-16 mm), and as narrow-necked (<4.0 mm neck width) or wide-necked (>4.0 mm neck width). Mean dome-neck ratio was calculated and compared with that of human aneurysms. RESULTS: All aneurysm cavities were angiographically patent. Widths of the cavities ranged from 2.5 to 7.1 mm (mean, 4.1 +/- 1.2 mm); heights ranged from 3.0 to 15.6 mm (mean, 8.8 +/- 2.6 mm). Three (7.5%) of 40 aneurysms were small, 20 (50%) were medium-sized, and 17 (42.5%) were large. Twenty-two (55%) of 40 aneurysms were small-necked, and 18 (45%) were wide-necked. Mean dome-neck ratio was 1.13 +/- 0.54. Mean parent artery diameter was 4.3 +/- 1.4 mm. CONCLUSION: Saccular aneurysms of sizes similar to that of human intracranial aneurysms were reliably created using a simple method of vessel ligation and elastase injury. Neck sizes varied with both large and small-necked aneurysms created.

Dr. Gary J. Becker young investigator award: comparison of small-diameter type 1 collagen stent-grafts and PTFE stent-grafts in a canine model--work in progress.

PURPOSE: To report an in-progress experiment in a canine model in which two types of small-diameter stent-grafts-one constructed of polytetrafluoroethylene (PTFE) and the other of a new, type 1 collagen material-were compared regarding vessel patency, intimal hyperplasia formation, and tissue reaction. MATERIALS AND METHODS: Six mongrel dogs weighing 30-35 kg were used. Stent-grafts of 4-mm diameter and 20-mm length were constructed with use of balloon-expandable stainless-steel stents wrapped with either PTFE or a new type 1 collagen graft. Stent-grafts were placed in deep femoral arteries bilaterally (PTFE on one side, collagen on the other). Animals were followed for 2 weeks (n = 2), 6 weeks (n = 2), or 12 weeks (n = 2). Percent stenosis based on angiographic findings as well as thickness and area of neointimal hyperplasia were compared at each time point and compared with use of the Student t test. RESULTS: All devices were patent in the immediate postimplantation period. Five of six collagen stent-grafts and five of six PTFE implants were patent at follow-up. In-stent stenosis was undetectable angiographically in all five patent collagen stent-grafts. All five patent PTFE stent-grafts showed demonstrable in-stent stenosis (10%-60%), indicating a trend toward improved patency in collagen stent-grafts versus PTFE stent-grafts (P = .07). Neointimal hyperplasia was absent at 2 weeks in the collagen stent-grafts. Neointimal thickness increased to a maximum of 360 microm at 12 weeks in the collagen stent-grafts. For PTFE stent-grafts, neointimal hyperplasia was present in all samples and reached a maximum of 770 microm at 12 weeks (P = .03). CONCLUSIONS: Even in small-diameter vessels, type 1 collagen stent-grafts demonstrate excellent patency rates and favorable histologic findings. The type 1 collagen stent-graft technology merits further developmental efforts in preclinical models.

Serial angiography in an elastase-induced aneurysm model in rabbits: evidence for progressive aneurysm enlargement after creation.

BACKGROUND AND PURPOSE: Among the several reports of elastase-induced aneurysm models, only the rabbit common carotid artery (CCA) model has been used for testing endovascular occlusion devices. Our purpose was to study the growth characteristics of an elastase-induced aneurysm model in rabbits for the purpose of determining whether delayed aneurysm enlargement occurs after creation. METHODS: Nine New Zealand White rabbits (3-4 kg) were used in this study. All study animals underwent surgery to isolate the right CCA. In three control animals, the lumen was incubated with saline and iodinated contrast material for 20 minutes. In six test animals, the lumen of the CCA was incubated with porcine elastase for 20 minutes. In all study animals, the distal right CCA was ligated. IV digital subtraction angiography was performed on postprocedural days 3, 5, 7, 14, 28, 35, 56, 84, and 112. Using an external sizing reference, the width and height of patent arterial segments at the right CCA origin were measured by two observers. For test animals, aneurysm dimensions were compared between early and late time points by using the Student's t test. RESULTS: In the control (no elastase) animals, slitlike cavities at the origin of the right CCA decreased in size over time to become nearly obliterated by 21 days. Conversely, a short segment of the proximal CCA remained widely patent in all six test animals. With the exception of a single time point in one test animal, all "aneurysm" cavities in the test animals were dilated as compared with the normal diameter of the CCA. On day 3 after surgery, the mean width and height of the aneurysm cavities in the test animals were 3.2 +/- 0.6 and 6.0 +/- 1.3 mm, respectively. Compared with dimensions at day 3, aneurysms in test animals were larger at day 14, with mean width and height of 4.1 +/- 1.7 and 8.3 +/- 1.9 mm, respectively (P =.02). Aneurysms in test animals had increased further at 21 days compared with 14 days (P =.01). Compared with measurements obtained at 21 days, dimensions remained essentially unchanged at 28 and 35 days. Thirty-five days after surgery, mean width and height were 5.0 +/- 0.9 and 10.0 +/- 2.2 mm, respectively. Follow-up imaging performed < or = 4 months after aneurysm creation showed no further change in aneurysm dimensions. CONCLUSION: Elastase incubation and vessel ligation results in patent aneurysmally dilated arterial segments at the origin of the right CCA in rabbits. These aneurysms show progressive increases in diameter over time, finally stabilizing at approximately 1 month. Our data, which show early progressive aneurysm enlargement, suggest that this model may be used for the study of systemic therapies aimed at diminishing aneurysm rest regrowth and also indicate that embolization of these model aneurysms should be delayed at least 21 days after aneurysm creation.