In vitro and in vivo evaluation of tedizolid nanoparticle incorporated buccal films for oromucosal infections.

A novel tedizolid phosphate (TZP) nanoparticle (NP)-loaded buccal film formulation was developed for the treatment of buccal wounds infected with S. aureus. TZP-loaded chitosan NPs were produced and characterized to prepare this composite system. The optimum NP formulation was then loaded into mucoadhesive buccal films. The antibacterial effects of the obtained buccal films were evaluated by in vitro and in vivo studies. The optimum TZP-NP formulation (F8) had a particle size of 177.40 ± 2.97 nm and PDI and ZP values were 0.437 ± 0.002 and 33.9 ± 0.5, respectively. In antibacterial efficacy tests, the optimum NP containing buccal film formulation was used, which released approximately 90 % of TZP within 5 h. TZP-NP-loaded buccal films achieved a 3 log10 reduction in S. aureus within just 3 h. It was also administered to Wistar albino rats with S. aureus-infected buccal wounds. As a result of in vivo studies, a significant decrease in the number of S. aureus was detected in wound samples treated with TZP-NP-loaded buccal films. In addition, a complete inhibition of growth was observed on the fifth day of the film application. The current work suggested that the TZP-NP-loaded composite films could be promising candidates for effective and long-acting antibacterial treatment of buccal wounds.

Advancements and applications of upconversion nanoparticles in wound dressings.

Wound healing is a complex process that requires effective management to prevent infections and promote efficient tissue regeneration. In recent years, upconversion nanoparticles (UCNPs) have emerged as promising materials for wound dressing applications due to their unique optical properties and potential therapeutic functionalities. These nanoparticles possess enhanced antibacterial properties when functionalized with antibacterial agents, helping to prevent infections, a common complication in wound healing. They can serve as carriers for controlled drug delivery, enabling targeted release of therapeutic agents to the wound site, allowing for tailored treatment and optimal healing conditions. These nanoparticles possess the ability to convert near-infrared (NIR) light into the visible and/or ultraviolet (UV) regions, making them suitable for therapeutic (photothermal therapy and photodynamic therapy) and diagnostic applications. In the context of wound healing, these nanoparticles can be combined with other materials such as hydrogels, fibers, metal-organic frameworks (MOFs), graphene oxide, etc., to enhance the healing process and prevent the growth of microbial infections. Notably, UCNPs can act as sensors for real-time monitoring of the wound healing progress, providing valuable feedback to healthcare professionals. Despite their potential, the use of UCNPs in wound dressing applications faces several challenges. Ensuring the stability and biocompatibility of UCNPs under physiological conditions is crucial for their effective integration into dressings. Comprehensive safety and efficacy evaluations are necessary to understand potential risks and optimize UCNP-based dressings. Scalability and cost-effectiveness of UCNP synthesis and manufacturing processes are important considerations for practical applications. In addition, efficient incorporation of UCNPs into dressings, achieving uniform distribution, poses an important challenge that needs to be addressed. Future research should prioritize addressing concerns regarding stability and biocompatibility, efficient integration into dressings, rigorous safety evaluation, scalability, and cost-effectiveness. The purpose of this review is to critically evaluate the advantages, challenges, and key properties of UCNPs in wound dressing applications to provide insights into their potential as innovative solutions for enhancing wound healing outcomes. We have provided a detailed description of various types of smart wound dressings, focusing on the synthesis and biomedical applications of UCNPs, specifically their utilization in different types of wound dressings.

Application of Convergent Science and Technology toward Ocular Disease Treatment.

Eyes are one of the main critical organs of the body that provide our brain with the most information about the surrounding environment. Disturbance in the activity of this informational organ, resulting from different ocular diseases, could affect the quality of life, so finding appropriate methods for treating ocular disease has attracted lots of attention. This is especially due to the ineffectiveness of the conventional therapeutic method to deliver drugs into the interior parts of the eye, and the also presence of barriers such as tear film, blood-ocular, and blood-retina barriers. Recently, some novel techniques, such as different types of contact lenses, micro and nanoneedles and in situ gels, have been introduced which can overcome the previously mentioned barriers. These novel techniques could enhance the bioavailability of therapeutic components inside the eyes, deliver them to the posterior side of the eyes, release them in a controlled manner, and reduce the side effects of previous methods (such as eye drops). Accordingly, this review paper aims to summarize some of the evidence on the effectiveness of these new techniques for treating ocular disease, their preclinical and clinical progression, current limitations, and future perspectives.

Three-dimensional printed dosage forms based on disease-focussed perspectives.

OBJECTIVES: Three-dimensional printing (3DP) has gained importance worldwide recently as a novel drug manufacturing technology. 3DP technologies are suitable in the pharmaceutical field because of having the potential in personalized medicine. The aim of this review is to present an overview of the use of 3DP technologies in pharmaceutical area, their working principles and critical process parameters. In addition, this review presents an innovative approach that evaluates the use of 3DP technologies on disease to disease. KEY FINDINGS: This review covers the potential use of 3DP technologies in different diseases by evaluating them on a research basis. These diseases can be summarized as cardiovascular, neurological, respiratory, oncological, inflammatory, vaginal, dermatological and other diseases. It has been focussed on manuscripts that published after 2015. Studies on the use of 3DP in each disease group have been systematically reviewed by considering the methods, types of printers used and the prepared dosage forms. Oral formulations (tablets and films), implants, topical systems and vaccines are some of the examples of the mentioned dosage forms. SUMMARY: This review presented a systematic and novel overview of the use of 3DP in the treatment of different clinical disorders.

3D printed extended release tablets for once daily use: An in vitro and in vivo evaluation study for a personalized solid dosage form.

Fused deposition modeling (FDM)-3D printing enables the manufacturing of dosage forms with personalized doses and controllable release profiles. Parkinson's disease is a neurodegenerative disorder that causes motor complications. In the treatment of the disease, the nonergot dopamine receptor agonist pramipexole is used in gradually increasing doses depending on patient's needs. Hence, there are various dosed commercial products of pramipexole and it is a suitable model drug for the preparation of personalized-dose 3D printed dosage forms. In this study, we prepared extended release 3D tablets of pramipexole for once daily use in Parkinson's disease. Herein, 12 different 3D tablet formulations were prepared and in vitro characterizations were performed on these formulations. The formulations were compared with the marketed tablet and the optimum formulation was selected. The chosen formulation was prepared with commercially available doses of pramipexole and also with intermediate doses which are not available in the market to demonstrate the applicability of 3D printing in personalized dosing. Stability studies, which have innovative features for 3D tablets, were conducted in optimum 3D tablet formulation for 6 months at 25 °C/60% relative humidity (RH) and 40 °C/75% RH conditions. After oral administration of the optimum 3D tablets and the marketed tablets (in the same dose) to the rats, 24-hour plasma profiles were obtained and pharmacokinetic parameters were calculated. 3D tablets were successfully prepared in personalized doses and their properties were similar for almost all doses. The optimum 3D tablet formulation was found to be stable during the stability tests. 3D tablet and marketed tablet performed similar plasma profiles. The relative bioavailability of 3D tablet formulation was calculated as 107.6% compared with the marketed tablet. Briefly, in vitro and in vivo evaluations demonstrated that FDM-3D printing is a promising technology for the development of personalized dosage forms with extended release property and comparable to conventional ones.

An Effective Technology for the Development of Immediate Release Solid Dosage Forms Containing Low-Dose Drug: Fused Deposition Modeling 3D Printing.

PURPOSE: Fabrication of immediate release (IR) tablet formulations with rapid release profile via fused deposition modeling 3D printing (FDM 3DP) is a challenge. The aims of this study were to prepare IR tablets with different dissolution profiles and to increase their in vitro dissolution rates by making physical modifications on them. Pramipexole was used as the model low-dose drug. METHODS: Polymeric filaments were prepared with six different combinations of Eudragit EPO and poly(ethylene) oxide by hot melt extrusion and 3D tablets were produced using an FDM printer. Characterization studies for the filaments and tablets were carried out. The printability of the filaments was also evaluated using a novel mechanical characterization method. Tablet formulation with optimum dissolution profile was chosen and physical modifications (infill %, shape change and thickness) on this formulation were made. RESULTS: Low-dose pramipexole loading filaments and 3D tablets were homogenously prepared. The printability of the filaments was related to their flexibility. With the physical modifications, the drug release completion time of the tablets reduced to 5 min. CONCLUSIONS: The same rapid release profiles with conventional IR tablets can be reached by making only physical changes on 3D tablets without using any filling or disintegrating agents.