RESUMO
One of the biggest challenges for a more widespread utilization of plant fibers is to better understand the different molecular factors underlying the variability in fineness and mechanical properties of both elementary and scutched fibers. Accordingly, we analyzed genome-wide transcription profiling from bast fiber bearing tissues of seven different flax varieties (4 spring, 2 winter fiber varieties and 1 winter linseed) and identified 1041 differentially expressed genes between varieties, of which 97 were related to cell wall metabolism. KEGG analysis highlighted a number of different enriched pathways. Subsequent statistical analysis using Partial Least-Squares Discriminant Analysis showed that 73% of the total variance was explained by the first 3 X-variates corresponding to 56 differentially expressed genes. Calculation of Pearson correlations identified 5 genes showing a strong correlation between expression and morphometric data. Two-dimensional gel proteomic analysis on the two varieties showing the most discriminant and significant differences in morphometrics revealed 1490 protein spots of which 108 showed significant differential abundance. Mass spectrometry analysis successfully identified 46 proteins representing 32 non-redundant proteins. Statistical clusterization based on the expression level of genes corresponding to the 32 proteins showed clear discrimination into three separate clusters, reflecting the variety type (spring-/winter-fiber/oil). Four of the 32 proteins were also highly correlated with morphometric features. Examination of predicted functions for the 9 (5 + 4) identified genes highlighted lipid metabolism and senescence process. Calculation of Pearson correlation coefficients between expression data and retted fiber mechanical measurements (strength and maximum force) identified 3 significantly correlated genes. The genes were predicted to be connected to cell wall dynamics, either directly (Expansin-like protein), or indirectly (NAD(P)-binding Rossmann-fold superfamily protein). Taken together, our results have allowed the identification of molecular actors potentially associated with the determination of both in-planta fiber morphometrics, as well as ex-planta fiber mechanical properties, both of which are key parameters for elementary fiber and scutched fiber quality in flax.
RESUMO
MAIN CONCLUSION: Transcriptome and biochemical analyses are applied to individual plant cell types to reveal potential players involved in the molecular machinery of cell wall formation in specialized cells such as collenchyma. Plant collenchyma is a mechanical tissue characterized by an irregular, thickened cell wall and the ability to support cell elongation. The composition of the collenchyma cell wall resembles that of the primary cell wall and includes cellulose, xyloglucan, and pectin; lignin is absent. Thus, the processes associated with the formation of the primary cell wall in the collenchyma can be more pronounced compared to other tissues due to its thickening. Primary cell walls intrinsic to different tissues may differ in structure and composition, which should be reflected at the transcriptomic level. For the first time, we conducted transcriptome profiling of collenchyma strands isolated from young celery petioles and compared them with other tissues, such as parenchyma and vascular bundles. Genes encoding proteins involved in the primary cell wall formation during cell elongation, such as xyloglucan endotransglucosylase/hydrolases, expansins, and leucine-rich repeat proteins, were significantly activated in the collenchyma. As the key players in the transcriptome orchestra of collenchyma, xyloglucan endotransglucosylase/hydrolase transcripts were characterized in more detail, including phylogeny and expression patterns. The comprehensive approach that included transcriptome and biochemical analyses allowed us to reveal peculiarities of collenchyma cell wall formation and modification, matching the abundance of upregulated transcripts and their potential substrates for revealed gene products. As a result, specific isoforms of multigene families were determined for further functional investigation.
Assuntos
Apium , Apium/genética , Celulose/metabolismo , Perfilação da Expressão Gênica , Plantas/genética , Glicosiltransferases/genética , Verduras/genética , Verduras/metabolismo , Parede Celular/metabolismoRESUMO
The goal of any plant breeding program is to improve quality of a target crop. Crop quality is a comprehensive feature largely determined by biological background. To improve the quality parameters of crops grown for the production of fiber, a functional approach was used to search for genes suitable for the effective manipulation of technical fiber quality. A key step was to identify genes with tissue and stage-specific pattern of expression in the developing fibers. In the current study, we investigated the relationship between gene expression evaluated in bast fibers of developing flax plants and the quality parameters of technical fibers measured after plant harvesting. Based on previously published transcriptomic data, two sets of genes that are upregulated in fibers during intrusive growth and tertiary cell wall deposition were selected. The expression level of the selected genes and fiber quality parameters were measured in fiber flax, linseed (oil flax) cultivars, and wild species that differ in type of yield and fiber quality parameters. Based on gene expression data, linear regression models for technical stem length, fiber tensile strength, and fiber flexibility were constructed, resulting in the identification of genes that have high potential for manipulating fiber quality. Chromosomal localization and single nucleotide polymorphism distribution in the selected genes were characterized for the efficacy of their use in conventional breeding and genome editing programs. Transcriptome-based selection is a highly targeted functional approach that could be used during the development of new cultivars of various crops.
RESUMO
Flax is both a valuable resource and an interesting model crop. Despite a long history of flax genetic transformation only one transgenic linseed cultivar has been so far registered in Canada. Implementation and use of the genome-editing technologies that allow site-directed modification of endogenous genes without the introduction of foreign genes might improve this situation. Besides its potential for boosting crop yields, genome editing is now one of the best tools for carrying out reverse genetics and it is emerging as an especially versatile tool for studying basic biology. A complex interplay between the flax tubulin family (6 α-, 14 ß-, and 2 γ-tubulin genes), the building block of microtubules, and the CesA (15-16 genes), the subunit of the multimeric cellulose-synthesizing complex devoted to the oriented deposition of the cellulose microfibrils is fundamental for the biosynthesis of the cell wall. The role of the different members of each family in providing specificities to the assembled complexes in terms of structure, dynamics, activity, and interaction remains substantially obscure. Genome-editing strategies, recently shown to be successful in flax, can therefore be useful to unravel the issue of functional redundancy and provide evidence for specific interactions between different members of the tubulin and CesA gene families, in relation to different phase and mode of cell wall biosynthesis.
Assuntos
Linho/genética , Edição de Genes , Genes de Plantas , Tubulina (Proteína)/genética , Parede Celular/metabolismo , Celulose/biossíntese , Linho/metabolismo , Família MultigênicaRESUMO
Fiber flax is an important source of natural fiber and a comprehensive model for the plant fiber biogenesis studies. Cellulose-synthase (CesA) and cytoskeletal genes are known to be important for the cell wall biogenesis in general and for the biogenesis of flax fibers in particular. Currently, knowledge about activity of these genes during the plant growth is limited. In this study, we have investigated flax fiber biogenesis by measuring expression of CesA and cytoskeletal genes at two stages of the flax development (seedlings and stems at the rapid growth stage) in several flax subspecies (elongatum, mediterraneum, crepitans). RT-qPCR has been used to quantify the expression of LusСesA1, LusСesA4, LusСesA7, LusСesA6, Actin, and α-Tubulin genes in plant samples. We report that CesA genes responsible for the secondary cell wall synthesis (LusCesA4, LusCesA7) have different expression pattern compared with CesA genes responsible for the primary cell wall synthesis (LusCesA1, LusCesA6): an average expression of LusCesA4 and LusCesA7 genes is relatively high in seedlings and further increases in stems at the rapid growth stage, whereas an average expression of LusCesA1 and LusCesA6 genes decreases. Interestingly, LusCesA1 is the only studied gene with different expression dynamics between the flax subspecies: its expression decreases by 5.2-10.7 folds in elongatum and mediterraneum but does not change in crepitans subspecies when the rapid growth stage and seedlings are compared. The expression of cytoskeleton genes (coding actin and α-tubulin) is relatively stable and significantly higher than the expression of cellulose-synthase genes in all the studied samples.
Assuntos
Actinas/genética , Parede Celular/metabolismo , Linho , Glucosiltransferases/genética , Sementes , Tubulina (Proteína)/genética , Linho/genética , Linho/metabolismo , Regulação da Expressão Gênica de Plantas , Genes de Plantas , Proteínas de Plantas/genética , Plântula/metabolismo , Sementes/genética , Sementes/metabolismoRESUMO
Flax (Linum usitatissimum L.) is a valuable food and fiber crop cultivated for its quality fiber and seed oil. α-, ß-, γ-tubulins and actins are the main structural proteins of the cytoskeleton. α- and γ-tubulin and actin genes have not been characterized yet in the flax genome. In this study, we have identified 6 α-tubulin genes, 13 ß-tubulin genes, 2 γ-tubulin genes, and 15 actin genes in the flax genome and analyzed the phylogenetic relationships between flax and Arabidopsis thaliana tubulin and actin genes. Six α-tubulin genes are represented by three paralogous pairs, among 13 ß-tubulin genes 7 different isotypes can be distinguished, 6 of which are encoded by two paralogous genes each. γ-tubulin is represented by a paralogous pair of genes one of which may be not functional. Fifteen actin genes represent seven paralogous pairs-seven actin isotypes and a sequentially duplicated copy of one of the genes of one of the isotypes. Exon-intron structure analysis has shown intron length polymorphism within the ß-tubulin genes and intron number variation among the α-tubulin gene: three or four introns are found in two or four genes, respectively. Intron positioning occurs at conservative sites, as observed in numerous other plant species. Flax actin genes show both intron length polymorphisms and variation in the number of intron that may be two or three. These data will be useful to support further studies on the specificity, functioning, regulation, and evolution of the flax cytoskeleton proteins.