Numerical and artificial intelligence based investigation on the development of design guidelines for pultruded GFRP RHS profiles subjected to web crippling.

This article presents a numerical and artificial intelligence (AI) based investigation on the web crippling performance of pultruded glass fiber reinforced polymers' (GFRP) rectangular hollow section (RHS) profiles subjected to interior-one-flange (IOF) loading conditions. To achieve the desired research objectives, a finite element based computational model was developed using one of the popular simulating software ABAQUS CAE. This model was then validated by utilizing the results reported in experimental investigation-based article of Chen and Wang. Once the finite element model was validated, an extensive parametric study was conducted to investigate the aforementioned phenomenon on the basis of which a comprehensive, universal, and coherent database was assembled. This database was then used to formulate the design guidelines for the web crippling design of pultruded GFRP RHS profiles by employing AI based gene expression programming (GEP). Based on the findings of numerical investigation, the web crippling capacity of abovementioned structural profiles subjected to IOF loading conditions was found to be directly related to that of section thickness and bearing length whereas inversely related to that of section width, section height, section's corner radii, and profile length. On the basis of the findings of AI based investigation, the modified design rules proposed by this research were found to be accurately predicting the web crippling capacity of aforesaid structural profiles. This research is a significant contribution to the literature on the development of design guidelines for pultruded GFRP RHS profiles subjected to web crippling, however, there is still a lot to be done in this regard before getting to the ultimate conclusions.

Development of correlations between various engineering rockmass classification systems using railway tunnel data in Garhwal Himalaya, India.

Engineering rockmass classifications are an integral part of design, support and excavation procedures of tunnels, mines, and other underground structures. These classifications are directly linked to ground reaction and support requirements. Various classification systems are in practice and are still evolving. As different classifications serve different purposes, it is imperative to establish inter-correlatability between them. The rating systems and engineering judgements influence the assignment of ratings owing to cognition. To understand the existing correlation between different classification systems, the existing correlations were evaluated with the help of data of 34 locations along a 618-m-long railway tunnel in the Garhwal Himalaya of India and new correlations were developed between different rock classifications. The analysis indicates that certain correlations, such as RMR-Q, RMR-RMi, RMi-Q, and RSR-Q, are comparable to the previously established relationships, while others, such as RSR-RMR, RCR-Qn, and GSI-RMR, show weak correlations. These deviations in published correlations may be due to individual parameters of estimation or measurement errors. Further, incompatible classification systems exhibited low correlations. Thus, the study highlights a need to revisit existing correlations, particularly for rockmass conditions that are extremely complex, and the predictability of existing correlations exhibit high variations. In addition to augmenting the existing database, new correlations for metamorphic rocks in the Himalayan region have been developed and presented that can serve as a guide for future rock engineering projects in such formations and aid in developing appropriate excavation and rock support methodologies.

Enhancing construction site performance through technology and management practices as material waste mitigation in the Malaysian construction industry.

The construction industry, increasingly prioritizing sustainability, necessitates an exploration of technology and management's role in mitigating material waste at construction sites. This study examines the impact of 3R, IBS, BIM, and MMA in enhancing Construction Site Performance (CSP) in the Malaysian construction sector. Seven hypotheses were formulated to assess the relationship between technology adoption, material management practices, and the moderating influence of Material Management Adoption (MMA) on CSP. Data were collected through an online survey from 295 valid responses in the Malaysian construction sector, focusing on professionals involved in solid waste management. Utilizing Partial Least Squares - Structural Equation Modeling (PLS-SEM) and Statistical Package for the Social Sciences (SPSS), the findings highlight the importance of technological integration, efficient material management, and competitive strategies in effective material waste mitigation. Furthermore, the qualitative aspect of the study, conducted among 6 solid waste organizations in Malaysia, enriches the findings by providing nuanced insights into local practices and challenges. Emphasizing the importance of contextual insights, the study addresses professionals involved in solid waste management within the Malaysian construction industry. The geographical specificity adds depth to the analysis, offering a comprehensive understanding of regional dynamics. Despite acknowledging limitations in technology and material usage, the study offers recommendations for refining waste mitigation and improving construction site performance. This research model offers actionable insights for construction site stakeholders, emphasizing the criticality of waste mitigation and CSP. The results, both quantitative and qualitative, underscore the potential of these practices within the Malaysian construction industry to foster innovation and drive positive change.

Forecasting the strength of preplaced aggregate concrete using interpretable machine learning approaches.

Preplaced aggregate concrete (PAC) also known as two-stage concrete (TSC) is widely used in construction engineering for various applications. To produce PAC, a mixture of Portland cement, sand, and admixtures is injected into a mold subsequent to the deposition of coarse aggregate. This process complicates the prediction of compressive strength (CS), demanding thorough investigation. Consequently, the emphasis of this study is on enhancing the comprehension of PAC compressive strength using machine learning models. Thirteen models are evaluated with 261 data points and eleven input variables. The result depicts that xgboost demonstrates exceptional accuracy with a correlation coefficient of 0.9791 and a normalized coefficient of determination (R2) of 0.9583. Moreover, Gradient boosting (GB) and Cat boost (CB) also perform well due to its robust performance. In addition, Adaboost, Voting regressor, and Random forest yield precise predictions with low mean absolute error (MAE) and root mean square error (RMSE) values. The sensitivity analysis (SA) reveals the significant impact of key input parameters on overall model sensitivity. Notably, gravel takes the lead with a substantial 44.7% contribution, followed by sand at 19.5%, cement at 15.6%, and Fly ash and GGBS at 5.9% and 5.1%, respectively. The best fit model i.e., XG-Boost model, was employed for SHAP analysis to assess the relative importance of contributing attributes and optimize input variables. The SHAP analysis unveiled the water-to-binder (W/B) ratio, superplasticizer, and gravel as the most significant factors influencing the CS of PAC. Furthermore, graphical user interface (GUI) have been developed for practical applications in predicting concrete strength. This simplifies the process and offers a valuable tool for leveraging the model's potential in the field of civil engineering. This comprehensive evaluation provides valuable insights to researchers and practitioners, empowering them to make informed choices in predicting PAC compressive strength in construction projects. By enhancing the reliability and applicability of predictive models, this study contributes to the field of preplaced aggregate concrete strength prediction.

Effect of banana tree leaves ash as cementitious material on the durability of concrete against sulphate and acid attacks.

The construction industry's rapid growth poses challenges tied to raw material depletion and increased greenhouse gas emissions. To address this, alternative materials like agricultural residues are gaining prominence due to their potential to reduce carbon emissions and waste generation. In this context this research optimizes the use of banana leaves ash as a partial cement substitution, focusing on durability, and identifying the ideal cement-to-ash ratio for sustainable concrete. For this purpose, concrete mixes were prepared with BLA replacing cement partially in different proportions i.e. (0 %, 5 %, 10 %, 15 %, & 20 %) and were analyzed for their physical, mechanical and Durability (Acid and Sulphate resistance) properties. Compressive strength, acid resistance and sulphate resistance testing continued for 90 days with the intervals of 7, 28 and 90 days. The results revealed that up to 10 % incorporation of BLA improved compressive strength by 10 %, while higher BLA proportions (up to 20 %) displayed superior performance in durability tests as compared to the conventional mix. The results reveal the potentials of banana leave ash to refine the concrete matrix by formation of addition C-S-H gel which leads towards a better performance specially in terms of durability aspect. Hence, banana leaf ash (BLA) is an efficient concrete ingredient, particularly up to 10 % of the mix. Beyond this threshold, it's still suitable for applications where extreme strength isn't the primary concern, because there may be a slight reduction in compressive strength.

Life cycle assessment of iron-biomass supported catalyst for Fischer Tropsch synthesis.

The iron-based biomass-supported catalyst has been used for Fischer-Tropsch synthesis (FTS). However, there is no study regarding the life cycle assessment (LCA) of biomass-supported iron catalysts published in the literature. This study discusses a biomass-supported iron catalyst's LCA for the conversion of syngas into a liquid fuel product. The waste biomass is one of the source of activated carbon (AC), and it has been used as a support for the catalyst. The FTS reactions are carried out in the fixed-bed reactor at low or high temperatures. The use of promoters in the preparation of catalysts usually enhances C5+ production. In this study, the collection of precise data from on-site laboratory conditions is of utmost importance to ensure the credibility and validity of the study's outcomes. The environmental impact assessment modeling was carried out using the OpenLCA 1.10.3 software. The LCA results reveals that the synthesis process of iron-based biomass supported catalyst yields a total impact score in terms of global warming potential (GWP) of 1.235E + 01 kg CO2 equivalent. Within this process, the AC stage contributes 52% to the overall GWP, while the preparation stage for the catalyst precursor contributes 48%. The comprehensive evaluation of the iron-based biomass supported catalyst's impact score in terms of human toxicity reveals a total score of 1.98E-02 kg 1,4-dichlorobenzene (1,4-DB) equivalent.

Computational prediction of workability and mechanical properties of bentonite plastic concrete using multi-expression programming.

Bentonite plastic concrete (BPC) demonstrated promising potential for remedial cut-off wall construction to mitigate dam seepage, as it fulfills essential criteria for strength, stiffness, and permeability. High workability and consistency are essential attributes for BPC because it is poured into trenches using a tremie pipe, emphasizing the importance of accurately predicting the slump of BPC. In addition, prediction models offer valuable tools to estimate various strength parameters, enabling adjustments to BPC mixing designs to optimize project construction, leading to cost and time savings. Therefore, this study explores the multi-expression programming (MEP) technique to predict the key characteristics of BPC, such as slump, compressive strength (fc), and elastic modulus (Ec). In the present study, 158, 169, and 111 data points were collected from the experimental studies for the slump, fc, and Ec, respectively. The dataset was divided into three sets: 70% for training, 15% for testing, and another 15% for model validation. The MEP models exhibited excellent accuracy with a correlation coefficient (R) of 0.9999 for slump, 0.9831 for fc, and 0.9300 for Ec. Furthermore, the comparative analysis between MEP models and conventional linear and non-linear regression models revealed remarkable precision in the predictions of the proposed MEP models, surpassing the accuracy of traditional regression methods. SHapley Additive exPlanation analysis indicated that water, cement, and bentonite exert significant influence on slump, with water having the greatest impact on compressive strength, while curing time and cement exhibit a higher influence on elastic modulus. In summary, the application of machine learning algorithms offers the capability to deliver prompt and precise early estimates of BPC properties, thus optimizing the efficiency of construction and design processes.

Eco-Transformation of construction: Harnessing machine learning and SHAP for crumb rubber concrete sustainability.

Researchers have focused their efforts on investigating the integration of crumb rubber as a substitute for conventional aggregates and cement in concrete. Nevertheless, the manufacture of crumb rubber concrete (CRC) has been linked to the release of noxious pollutants, hence presenting potential environmental hazards. Rather than developing novel CRC formulations, the primary objective of this work is to construct an extensive database by leveraging prior research efforts. The study places particular emphasis on two crucial concrete properties: compressive strength (fc') and tensile strength (fts). The database includes a total of 456 data points for fc' and 358 data points for fts, focusing on nine essential characteristics that have a substantial impact on both attributes. The research employs several machine learning algorithms, including both individual and ensemble methods, to undertake a comprehensive analysis of the created databases for fc' and fts. In order to ascertain the correctness of the models, a comparative analysis of machine learning techniques, namely decision tree (DT) and random forest (RF), is conducted using statistical evaluation. Cross-validation approaches are used in order to address the possible issues of overfitting. Furthermore, the Shapley additive explanations (SHAP) approach is used to investigate the influence of input parameters and their interrelationships. The findings demonstrate that the RF methodology has superior performance compared to other ensemble techniques, as shown by its lower error rates and higher coefficient of determination (R2) of 0.87 and 0.85 for fc' and fts respectively. When comparing ensemble approaches, it can be seen that AdaBoost outperforms bagging by 6 % for both outcome models and individual decision tree learners by 17% and 21% for fc' and fts respectively in terms of performance. The average accuracy of AdaBoost algorithm for both the models is 84%. Significantly, the age and the inclusion of crumb rubber in CRC are identified as the primary criteria that have a substantial influence on the mechanical properties of this particular kind of concrete.

Optimization of eco-friendly concrete with recycled coarse aggregates and rubber particles as sustainable industrial byproducts for construction practices.

In this technology era, sustainable construction practices have become quite imperative. The exploration of alternative materials to reduce the environmental footprint is of paramount importance. This research paper delves into an exhaustive investigation concerning the utilization of recycled coarse aggregates (RCA) and rubber particles (RP) in concrete. It contributes to the growing body of knowledge aimed at fostering sustainable development in the construction industry by reducing waste, promoting recycling, and mitigating the environmental footprint of building materials. The objective of the study is to evaluate the potential benefits and limitations associated with incorporating these materials, thereby providing a sustainable alternative to conventional concrete. In this research, construction and demolition waste were recycled and used as RCA as a fractional switch of natural coarse aggregate (NCA) from 0% to 100%, with an increment of 20% replacement of NCA in concrete. The RP received from discarded tires generated as automobile industry waste were used as a volumetric fractional substitution of sand in concrete from 0% to 20%, with a 5% increment. No pre-treatment for RCA and RP was carried out before their utilization in concrete. A total of 26 mixes, including control concrete without NCA and RP, with a design strength of 40 MPa, were prepared and tested. Concrete mixes were examined for workability, density, mechanical, and durability properties. It was found that the concrete with 60% RCA and 10% RP showed satisfactory results in evaluation with the strength parameters of control concrete, as the compressive strength obtained for this concrete mix is 40.18 MPa, similar to the control mix. The optimization for RCA and RP was conducted using Response Surface Methodology (RSM). The major concern observed was a rise in water absorption with an increase in the percentage replacement of NCA and natural sand by RCA and RP. Findings from the investigation illustrate a promising prospect for the use of RCA and RP in concrete applications, displaying competent mechanical properties and enhanced durability under certain conditions, offering a viable option for environmentally friendly construction practices. However, the research also sheds light on some constraints and challenges, such as the variability in the quality of RCA and the necessity for meticulous quality control to ensure the reliability and consistency of the end product. It is discerned that further refinement in processing techniques and quality assurance measures is pivotal for mainstream adoption of RCA and RP in concrete construction.

Effect of rock properties on wear and cutting performance of multi blade circular saw with iron based multi-layer diamond segments.

This study is an attempt for comprehensive, combining experimental data with advanced analytical techniques and machine learning for a thorough understanding of the factors influencing the wear and cutting performance of multi-blade diamond disc cutters on granite blocks. A series of sawing experiments were performed to evaluate the wear and cutting performance of multi blade diamond disc cutters with varying diameters in the processing of large-sized granite blocks. The multi-layer diamond segments comprising the Iron (Fe) based metal matrix were brazed on the sawing blades. The segment's wear was studied through micrographs and data obtained from the Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersive X-ray (EDS). Granite rock samples of nine varieties were tested in the laboratory to determine the quantitative rock parameters. The contribution of individual rock parameters and their combined effects on wear and cutting performance of multi blade saw were correlated using statistical machine learning methods. Moreover, predictive models were developed to estimate the wear and cutting rate based on the most significant rock properties. The point load strength index, uniaxial compressive strength, and deformability, Cerchar abrasivity index, and Cerchar hardness index were found to be the significant variables affecting the sawing performance.

Estimation of compressive strength of waste concrete utilizing fly ash/slag in concrete with interpretable approaches: optimization and graphical user interface (GUI).

Geo-polymer concrete has a significant influence on the environmental condition and thus its use in the civil industry leads to a decrease in carbon dioxide (CO2) emission. However, problems lie with its mixed design and casting in the field. This study utilizes supervised artificial-based machine learning algorithms (MLAs) to anticipate the mechanical characteristic of fly ash/slag-based geopolymer concrete (FASBGPC) by utilizing AdaBoost and Bagging on MLPNN to make an ensemble model with 156 data points. The data consist of GGBS (kg/m3), Alkaline activator (kg/m3), Fly ash (kg/m3), SP dosage (kg/m3), NaOH Molarity, Aggregate (kg/m3), Temperature (°C) and compressive strength as output parameter. Python programming is utilized in Anaconda Navigator using Spyder version 5.0 to predict the mechanical response. Statistical measures and validation of data are done by splitting the dataset into 80/20 percent and K-Fold CV is employed to check the accurateness of the model by using MAE, RMSE, and R2. Statistical analysis relies on errors, and tests against external indicators help determine how well models function in terms of robustness. The most important factor in compressive strength measurements is examined using permutation characteristics. The result reveals that ANN with AdaBoost is outclassed by giving maximum enhancement with R2 = 0.914 and shows the least error with statistical and external validations. Shapley analysis shows that GGBS, NaOH Molarity, and temperature are the most influential parameter that has significant content in making FASBGPC. Thus, ensemble methods are suitable for constructing prediction models because of their strong and reliable performance. Furthermore, the graphical user interface (GUI) is generated through the process of training a model that forecasts the desired outcome values when the corresponding inputs are provided. It streamlines the process and provides a useful tool for applying the model's abilities in the field of civil engineering.

Boosting-based ensemble machine learning models for predicting unconfined compressive strength of geopolymer stabilized clayey soil.

The present research employs new boosting-based ensemble machine learning models i.e., gradient boosting (GB) and adaptive boosting (AdaBoost) to predict the unconfined compressive strength (UCS) of geopolymer stabilized clayey soil. The GB and AdaBoost models were developed and validated using 270 clayey soil samples stabilized with geopolymer, with ground-granulated blast-furnace slag and fly ash as source materials and sodium hydroxide solution as alkali activator. The database was randomly divided into training (80%) and testing (20%) sets for model development and validation. Several performance metrics, including coefficient of determination (R2), mean absolute error (MAE), root mean square error (RMSE), and mean squared error (MSE), were utilized to assess the accuracy and reliability of the developed models. The statistical results of this research showed that the GB and AdaBoost are reliable models based on the obtained values of R2 (= 0.980, 0.975), MAE (= 0.585, 0.655), RMSE (= 0.969, 1.088), and MSE (= 0.940, 1.185) for the testing dataset, respectively compared to the widely used artificial neural network, random forest, extreme gradient boosting, multivariable regression, and multi-gen genetic programming based models. Furthermore, the sensitivity analysis result shows that ground-granulated blast-furnace slag content was the key parameter affecting the UCS.

Intelligent prediction modeling for flexural capacity of FRP-strengthened reinforced concrete beams using machine learning algorithms.

Fiber-reinforced polymers (FRP) are widely utilized to improve the efficiency and durability of concrete structures, either through external bonding or internal reinforcement. However, the response of FRP-strengthened reinforced concrete (RC) members, both in field applications and experimental settings, often deviates from the estimation based on existing code provisions. This discrepancy can be attributed to the limitations of code provisions in fully capturing the nature of FRP-strengthened RC members. Accordingly, machine learning methods, including gene expression programming (GEP) and multi-expression programming (MEP), were utilized in this study to predict the flexural capacity of the FRP-strengthened RC beam. To develop data-driven estimation models, an extensive collection of experimental data on FRP-strengthened RC beams was compiled from the experimental studies. For the assessment of the accuracy of developed models, various statistical indicators were utilized. The machine learning (ML) based models were compared with empirical and conventional linear regression models to substantiate their superiority, providing evidence of enhanced performance. The GEP model demonstrated outstanding predictive performance with a correlation coefficient (R) of 0.98 for both the training and validation phases, accompanied by minimal mean absolute errors (MAE) of 4.08 and 5.39, respectively. In contrast, the MEP model achieved a slightly lower accuracy, with an R of 0.96 in both the training and validation phases. Moreover, the ML-based models exhibited notably superior performances compared to the empirical models. Hence, the ML-based models presented in this study demonstrated promising prospects for practical implementation in engineering applications. Moreover, the SHapley Additive exPlanation (SHAP) method was used to interpret the feature's importance and influence on the flexural capacity. It was observed that beam width, section effective depth, and the tensile longitudinal bars reinforcement ratio significantly contribute to the prediction of the flexural capacity of the FRP-strengthened reinforced concrete beam.

Comparative analysis of various machine learning algorithms to predict 28-day compressive strength of Self-compacting concrete.

Construction industry is indirectly the largest source of CO2 emissions in the atmosphere, due to the use of cement in concrete. These emissions can be reduced by using industrial waste materials in place of cement. Self-Compacting Concrete (SCC) is a promising material to enhance the use of industrial wastes in concrete. However, there are very few methods available for accurate prediction of its strength, therefore, reliable models for estimating 28-day Compressive Strength (C-S) of SCC are developed in current study by using three Machine Learning (ML) algorithms including Multi Expression Programming (MEP), Extreme Gradient Boosting (XGB), and Random Forest (RF). The ML models were meticulously developed using a dataset of 231 points collected from internationally published literature considering seven most influential parameters including cement content, quantities of fly ash and silica fume, water content, coarse aggregate, fine aggregate, and superplasticizer dosage to predict C-S. The developed models were evaluated using different statistical errors including Root Mean Square Error (RMSE), Mean Absolute Error (MAE), coefficient of determination (R2) etc. The results showed that the XGB model outperformed the MEP and RF model in terms of accuracy with a correlation R2 = 0.998 compared to 0.923 for MEP and 0.986 for RF. Similar trend was observed for other error metrices. Thus, XGB is the most accurate model for estimating C-S of SCC. However, it is pertinent to mention here that it does not give its output in the form of an empirical equation like MEP model. The construction of these empirical models will help to efficiently estimate C-S of SCC for practical purposes.

Bio-inspired based meta-heuristic approach for predicting the strength of fiber-reinforced based strain hardening cementitious composites.

A recently introduced bendable concrete having hundred times greater strain capacity provides promising results in repair of engineering structures, known as strain hardening cementitious composites (SHHCs). The current research creates new empirical prediction models to assess the mechanical properties of strain-hardening cementitious composites (SHCCs) i.e., compressive strength (CS), first crack tensile stress (TS), and first crack flexural stress (FS), using gene expression programming (GEP). Wide-ranging records were considered with twelve variables i.e., cement percentage by weight (C%), fine aggregate percentage by weight (Fagg%), fly-ash percentage by weight (FA%), Water-to-binder ratio (W/B), super-plasticizer percentage by weight (SP%), fiber amount percentage by weight (Fib%), length to diameter ratio (L/D), fiber tensile strength (FTS), fiber elastic modulus (FEM), environment temperature (ET), and curing time (CT). The performance of the models was deduced using correlation coefficient (R) and slope of regression line. The established models were also assessed using relative root mean square error (RRMSE), Mean absolute error (MAE), Root squared error (RSE), root mean square error (RMSE), objective function (OBF), performance index (PI) and Nash-Sutcliffe efficiency (NSE). The resulting mathematical GP-based equations are easy to understand and are consistent disclosing the originality of GEP model with R in the testing phase equals to 0.8623, 0.9269, and 0.8645 for CS, TS and FS respectively. The PI and OBF are both less than 0.2 and are in line with the literature, showing that the models are free from overfitting. Consequently, all proposed models have high generalization with less error measures. The sensitivity analysis showed that C%, Fagg%, and ET are the most significant variables for all three models developed with sensitiveness index higher than 10 %. The result of the research can assist researchers, practitioners, and designers to assess SHCC and will lead to sustainable, faster, and safer construction from environment-friendly waste management point of view.

Experimental study on the eco-friendly plastic-sand paver blocks by utilising plastic waste and basalt fibers.

Plastic waste poses a significant hazard to the environment as a result of its high production rates, which endanger both the environment and its inhabitants. Similarly, another concern is the production of cement, which accounts for roughly 8% of global CO2 emissions. Thus, recycling plastic waste as a replacement for cementitious materials may be a more effective strategy for waste minimisation and cement elimination. Therefore, in this study, plastic waste (low-density polyethylene) is utilised in the production of plastic sand paver blocks without the use of cement. In addition to this, basalt fibers which is a green industrial material is also added in the production of eco-friendly plastic sand paver blocks to satisfy the standard of ASTM C902-15 of 20 N/mm2 for the light traffic. In order to make the paver blocks, the LDPE waste plastic was melted outside in the open air and then combined with sand. Variations were made to the ratio of LDPE to sand, the proportion of basalt fibers, and sand particle size. Paver blocks were evaluated for their compressive strength, water absorption, and at different temperatures. Including 0.5% percent basalt fiber of length 4 mm gives us the best result by enhancing compressive strength by 20.5% and decreasing water absorption by 50.5%. The best results were obtained with a ratio of 30:70 LDPE to sand, while the finest sand provides the greatest compressive strength. Moreover, the temperature effect was also studied from 0 to 60 °C, and the basalt fibers incorporated in plastic paver blocks showed only a 20% decrease in compressive strength at 60 °C. This research has produced eco-friendly paver blocks by removing cement and replacing it with plastic waste, which will benefit the environment, save money, reduce carbon dioxide emissions, and be suitable for low-traffic areas, all of which contribute to sustainable development.

The Impact of Different Parameters on the Formwork Pressure Exerted by Self-Compacting Concrete.

Despite the advantageous benefits offered by self-compacting concrete, its uses are still limited due to the high pressure exerted on the formwork. Different parameters, such as those related to concrete mix design, the properties of newly poured concrete, and placement method, have an impact on form pressure. The question remains unanswered on the degree of the impact for each parameter. Therefore, this study aims to study the level of impact of these parameters, including slump flow, T500 time, fresh concrete density, air content, static yield stress, concrete setting time, and concrete temperature. To mimic the casting scenario, 2 m columns were cast at various casting rates and a laboratory setup was developed. A pressure system that can wirelessly and continuously record pressure was used to monitor the pressure. Each parameter's impact on the level of pressure was examined separately. Casting rate and slump flow were shown to have a greater influence on pressure. The results also demonstrated that, while higher thixotropy causes form pressure to rapidly decrease, a high casting rate and high slump flow lead to high pressure. This study suggests that more thorough analysis should be conducted of additional factors that may have an impact, such as the placement method, which was not included in this publication.

Lateral Formwork Pressure for Self-Compacting Concrete-A Review of Prediction Models and Monitoring Technologies.

The maximum amount of lateral formwork pressure exerted by self-compacting concrete is essential to design a technically correct, cost-effective, safe, and robust formwork. A common practice of designing formwork is primarily based on using the hydrostatic pressure. However, several studies have proven that the maximum pressure is lower, thus potentially enabling a reduction in the cost of formwork by, for example, optimizing the casting rate. This article reviews the current knowledge regarding formwork pressure, parameters affecting the maximum pressure, prediction models, monitoring technologies and test setups. The currently used pressure predicting models require further improvement to consider several pressures influencing parameters, including parameters related to fresh and mature material properties, mix design and casting methods. This study found that the maximum pressure is significantly affected by the concretes' structural build-up at rest, which depends on concrete rheology, temperature, hydration rate and setting time. The review indicates a need for more in-depth studies.