TaTPS11 enhances wheat cold resistance by regulating source-sink factor.

The presence of sugar in plant tissue can lead to an increase in the osmotic pressure within cells, a decrease in the freezing point of plants, and protection against ice crystal damage to the tissue. Trehalose is closely related to sucrose, which comprises the largest proportion of sugar and has become a hot topic of research in recent years. Our previous studies have confirmed that a key trehalose synthesis gene, TaTPS11, from the cold-resistant winter wheat DM1, could enhance the cold resistance of plants by increasing sugar content. However, the underlying mechanism behind this phenomenon remains unclear. In this study, we cloned TaTPS11-6D, edited TaTPS11-6D using CRISPR/Cas9 technology and transformed 'Fielder' to obtain T2 generation plants. We screened out OE3-3 and OE8-7 lines with significantly higher cold resistance than that of 'Fielder' and Cri 4-3 edited lines with significantly lower cold resistance than that of 'Fielder'. Low temperature storage limiting factors were measured for OE3-3, OE8-7 and Cri 4-3 treated at different temperatures.The results showed that TaTPS11-6D significantly increased the content of sugar in plants and the transfer of sugar from source to storage organs under cold conditions. The TaTPS11-6D significantly increased the levels of salicylic, jasmonic, and abscisic acids while also significantly decreasing the level of gibberellic acid. Our research improves the model of low temperature storage capacity limiting factor.

[Improving the Rate of Palliative Care Completion in NICU Nurses].

BACKGROUND: Critically ill neonates receive care in the neonatal intensive care unit (NICU). Unfortunately, some neonates pass away in the NICU. Providing comprehensive neonatal palliative care and hospice services is crucial in supporting parents through the loss of their offspring. In our NICU, we identified that only 74.5% of nurses are able to properly recognize the need for palliative care and only 55% are able to implement the necessary procedures. PURPOSE: A project was designed and implemented to enhance the ability of nursing staff to recognize the need for and properly implement palliative care to improve the quality of this care in the NICU. RESOLUTIONS: We organized an on-the-job education and training program within our NICU with the goals of heightening awareness among nursing staff. In addition, a specialist palliative care operation flow chart, process preparation checklist, and palliative-care-related tools were created to facilitate the care process. RESULTS: After program implementation, among nursing staff in our NICU, the palliative care recognition accuracy rate rose to 100% (from 74.5%) and the implementation rate rose to 94.8% (from 55%). The quality of provided neonatal palliative care and hospice services was significantly improved. CONCLUSIONS: The developed program was shown to significantly improve nursing staff recognition and implementation of neonatal palliative care in our NICU. This experience provides a reference for improving palliative care quality and for helping families effectively manage end-of-life challenges.

High-Performance Ultraviolet Photodetector Based on Single-Crystal Integrated Self-Supporting 4H-SiC Nanohole Arrays.

Currently, the photodetectors (PDs) assembled by vertically aligned nanostructured arrays have attracted intensive interest owing to their unique virtues of low light reflectivity and rapid charge transport. However, in terms of the inherent limitations caused by numerous interfaces often existed within the assembled arrays, the photogenerated carriers cannot be effectively separated, thus weakening the performance of target PDs. Aiming at resolving this critical point, a high-performance ultraviolet (UV) PD with a single-crystal integrated self-supporting 4H-SiC nanohole arrays is constructed, which are prepared via the anode oxidation approach. As a result, the PD delivers an excellent performance with a high switching ratio (∼250), remarkable detectivity (6 × 1010 Jones), fast response (0.5 s/0.88 s), and excellent stability under 375 nm light illumination with a bias voltage of 5 V. Moreover, it has a high responsivity (824 mA/W), superior to those of most reported ones based on 4H-SiC. The overall high performance of the PDs could be mainly attributed to the synergistic effect of the SiC nanohole arrays' geometry, a whole single-crystal integrated self-supporting film without interfaces, established reliable Schottky contact, and incorporated N dopants.

High-performance K-ion half/full batteries with superb rate capability and cycle stability.

SignificanceThe present work might be significant for exploring advanced K-ion batteries with superb rate capability and cycle stability toward practical applications. The as-assembled K-ion half cell exhibits an excellent rate capability of 428 mA h g-1 at 100 mA g-1 and a high reversible specific capacity of 330 mA h g-1 with 120% specific capacity retention after 2,000 cycles at 2,000 mA g-1, which is the best among those based on carbon materials. The as-constructed full cell delivers 98% specific capacity retention over 750 cycles at 500 mA g-1, superior to most of those based on carbon materials that have been reported thus far.

Fine mapping of QPm.caas-3BS, a stable QTL for adult-plant resistance to powdery mildew in wheat (Triticum aestivum L.).

KEY MESSAGE: A stable QTL QPm.caas-3BS for adult-plant resistance to powdery mildew was mapped in an interval of 431 kb, and candidate genes were predicted based on gene sequences and expression profiles. Powdery mildew is a devastating foliar disease occurring in most wheat-growing areas. Characterization and fine mapping of genes for powdery mildew resistance can benefit marker-assisted breeding. We previously identified a stable quantitative trait locus (QTL) QPm.caas-3BS for adult-plant resistance to powdery mildew in a recombinant inbred line population of Zhou8425B/Chinese Spring by phenotyping across four environments. Using 11 heterozygous recombinants and high-density molecular markers, QPm.caas-3BS was delimited in a physical interval of approximately 3.91 Mb. Based on re-sequenced data and expression profiles, three genes TraesCS3B02G014800, TraesCS3B02G016800 and TraesCS3B02G019900 were associated with the powdery mildew resistance locus. Three gene-specific kompetitive allele-specific PCR (KASP) markers were developed from these genes and validated in the Zhou8425B derivatives and Zhou8425B/Chinese Spring population in which the resistance gene was mapped to a 0.3 cM interval flanked by KASP14800 and snp_50465, corresponding to a 431 kb region at the distal end of chromosome 3BS. Within the interval, TraesCS3B02G014800 was the most likely candidate gene for QPm.caas-3BS, but TraesCS3B02G016300 and TraesCS3B02G016400 were less likely candidates based on gene annotations and sequence variation between the parents. These results not only offer high-throughput KASP markers for improvement of powdery mildew resistance but also pave the way to map-based cloning of the resistance gene.

Construction of Consensus Genetic Map With Applications in Gene Mapping of Wheat (Triticum aestivum L.) Using 90K SNP Array.

Wheat is one of the most important cereal crops worldwide. A consensus map combines genetic information from multiple populations, providing an effective alternative to improve the genome coverage and marker density. In this study, we constructed a consensus map from three populations of recombinant inbred lines (RILs) of wheat using a 90K single nucleotide polymorphism (SNP) array. Phenotypic data on plant height (PH), spike length (SL), and thousand-kernel weight (TKW) was collected in six, four, and four environments in the three populations, and then used for quantitative trait locus (QTL) mapping. The mapping results obtained using the constructed consensus map were compared with previous results obtained using individual maps and previous studies on other populations. A simulation experiment was also conducted to assess the performance of QTL mapping with the consensus map. The constructed consensus map from the three populations spanned 4558.55 cM in length, with 25,667 SNPs, having high collinearity with physical map and individual maps. Based on the consensus map, 21, 27, and 19 stable QTLs were identified for PH, SL, and TKW, much more than those detected with individual maps. Four PH QTLs and six SL QTLs were likely to be novel. A putative gene called TraesCS4D02G076400 encoding gibberellin-regulated protein was identified to be the candidate gene for one major PH QTL located on 4DS, which may enrich genetic resources in wheat semi-dwarfing breeding. The simulation results indicated that the length of the confidence interval and standard errors of the QTLs detected using the consensus map were much smaller than those detected using individual maps. The consensus map constructed in this study provides the underlying genetic information for systematic mapping, comparison, and clustering of QTL, and gene discovery in wheat genetic study. The QTLs detected in this study had stable effects across environments and can be used to improve the wide adaptation of wheat cultivars through marker-assisted breeding.

High-Performance Field Emitters Based on SiC Nanowires with Designed Electron Emission Sites.

Making field emitters with both low turn-on field (Eto) and high current emission stability is one of the keys to push forward their practical applications. In the present work, we report the exploration of high-performance field emitters with designed sharp corners around SiC nanowires for fundamentally enhanced electron emission sites. The sharp corners with tailored densities are rationally created based on a facile etching technique. Accordingly, the emission sites and nanowires are integrated into a single-crystalline configuration without interfaces, which could offer the emitters with a robust structure to avoid the structural damage induced by the generated Joule heat and electrostatic forces over long-term field emission (FE) operation. Consequently, the Eto of the as-fabricated SiC field emitter is low down to 0.52 V/µm, which is comparable to the state-of-the-art one ever reported. Moreover, they have high electron emission stability with a current fluctuation of just 2% over 10 h, representing their promising applications in FE-based electronic units.

Conversion of Land Use from Upland to Paddy Field Changes Soil Bacterial Community Structure in Mollisols of Northeast China.

Mollisols are extremely important soil resource for crop and forage production. In northeast China, it is a major land use management practice from dry land crops to irrigated rice. However, there is few data regarding soil quality and microbial composition in Mollisols during land use transition. Here, we analyzed the upper 30 cm of soil from land with more than 30 years of paddy use and from adjacent areas with upland crops. Our results showed that land use and soil depth had a significant effect on soil properties and enzyme activities. Soil moisture (SM) and soil organic carbon (SOC) contents were substantially higher in paddy fields than in upland crop lands, while nitrogen-related enzyme activities were lower. Following the land use change, bacterial diversity was increased and bacterial community composition changed. Taxonomic analyses showed that Proteobacteria, Chloroflexi, Firmicutes, and Bacteroidetes were the dominant phyla present. At family level, Gemmatimonadaceae decreased with land use change, while Syntrophorhabdaceae and Syntrophacea that play a part in methane cycling and nitrifying bacteria such as Nitrospiraceae increased, indicating that the structure and composition of the bacterial community might be a promising indicator of Mollisol health. Redundancy analysis indicated that land use type had a stronger effect on the soil bacterial community composition than soil depth. Additionally, bacterial community composition was closely associated with soil parameters such as soil moisture, pH, SOC, NO3--N, and NH4+-N. Overall, land use change affects the physical and chemical properties of the soil, resulting in changes in the composition of the soil bacterial community and flora. These changes could provide a view of the bacterial community assembly and functional shifts following land use change.

Giant Piezoresistance in B-Doped SiC Nanobelts with a Gauge Factor of -1800.

The giant piezoresistance effect (PRE) of semiconductors as featured by a high gauge factor (GF) is recognized as the prerequisite for realizing optimal pressure sensors with desired high sensitivity. In this work, we report the discovery of giant PRE in SiC nanobelts with a record GF measured using an atomic force microscope. The transverse piezoresistance coefficient along the [111] direction reaches as high as -312.51 × 10-11 pa-1 with a corresponding GF up to -1875.1, which is twice more than the highest value ever reported on SiC nanomaterials. The first-principles calculations reveal that B doping turns the acceptor states in the bandgap into deeper impurity levels, which makes the major contribution to the observed giant piezoresistance behavior. Our result provides new insights on designing pressure sensors based on SiC nanomaterials.

Epidemiologic characteristics of traumatic fractures in elderly patients during the outbreak of coronavirus disease 2019 in China.

PURPOSE: This study aimed to describe the epidemiologic characteristics of fracture in the elderly during the COVID-19. METHODS: This was a retrospective multi-centre study, which included patients who sustained fractures between 20 January and 19 February 2020. The collected data included patients' demographics (age and gender), injury-related (injury type, fracture location, injury mechanism, places where fracture occurred), and treatment modality. SPSS 23.0 was used to describe the data and perform some analysis. RESULTS: A total of 436 patients with 453 fractures were included; there were 153 males and 283 females, with an average age of 76.2 years (standard deviation, SD, 7.7 years; 65 to 105). For either males or females, 70-74 years was the most commonly involved age group. A total of 317 (72.7%) patients had their fractures occurring at home. Among 453 fractures, there were 264 (58.3%) hip fractures, accounting for 58.3%. Fall from standing height was the most common cause of fracture, making a proportion of 89.4% (405/453). Most fractures (95.8%, 434/453) were treated surgically, and 4.2% (19/453) were treated by plaster fixation or traction. Open reduction and internal fixation (ORIF) was the most used surgical method, taking a proportion of 49.2% (223/453). CONCLUSION: These findings highlighted the importance of primary prevention (home prevention) measures and could be used for references for individuals, health care providers, or health administrative department during the global pandemic of COVID-19.

Development and validation of high-throughput and low-cost STARP assays for genes underpinning economically important traits in wheat.

KEY MESSAGE: We developed and validated 56 gene-specific semi-thermal asymmetric reverse PCR (STARP) markers for 46 genes of important wheat quality, biotic and abiotic stress resistance, grain yield, and adaptation-related traits for marker-assisted selection in wheat breeding. Development of high-throughput, low-cost, gene-specific molecular markers is important for marker-assisted selection in wheat breeding. In this study, we developed 56 gene-specific semi-thermal asymmetric reverse PCR (STARP) markers for wheat quality, tolerance to biotic and abiotic stresses, grain yield, and adaptation-related traits. The STARP assays were validated by (1) comparison of the assays with corresponding diagnostic STS/CAPS markers on 40 diverse wheat cultivars and (2) characterization of allelic effects based on the phenotypic and genotypic data of three segregating populations and 305 diverse wheat accessions from China and 13 other countries. The STARP assays showed the advantages of high-throughput, accuracy, flexibility, simple assay design, low operational costs, and platform compatibility. The state-of-the-art assays of this study provide a robust and reliable molecular marker toolkit for wheat breeding programs.

Single-Crystal Integrated Photoanodes Based on 4H-SiC Nanohole Arrays for Boosting Photoelectrochemical Water Splitting Activity.

Photoelectrochemical (PEC) splitting of water into H2 and O2 by direct use of sunlight is an ideal strategy for the production of clean and renewable energy, which fundamentally relies on the exploration of advanced photoanodes with high performance. In the present work, we report that single-crystal integrated photoanodes, that is, 4H-SiC nanohole arrays (active materials) and SiC wafer substrate (current collector), are established into a totally single-crystal configuration without interfaces, which was based on a two-step electrochemical etching process. The as-fabricated SiC photoanode showed a rather low onset potential of -0.016 V vs reversible hydrogen electrode (RHE) and a high photocurrent density of 3.20 mA/cm2 vs RHE 1.23 V, which were both superior to those of all reported SiC ones. Furthermore, such a rationally designed photoanode exhibited a fast photoresponse, wide photoresponse wavelength range, and long-term stability, representing its overall excellent PEC performance.

Enhanced Piezoresistive Behavior of SiC Nanowire by Coupling with Piezoelectric Effect.

Improving the sensitivity of the piezoresistive behavior of semiconductor nanostructures is critically important because it is one of the keys to explore advanced pressure sensors with desired sensitivity. Herein, we reported a strategy for improving the piezoresistive behavior of SiC nanowire by coupling with the piezoelectric effect of ZnO nanolayers, which were grown by an atomic layer deposition approach. As a result, the detected current of the as-constructed ZnO/SiC heterojunction nanowires is 6 times more than SiC nanowires, suggesting its substantially improved sensitivity. Moreover, the measured ΔR/R0 value and gauge factor (GF) of the ZnO/SiC heterojunction nanowires could be up to 0.82 and 50.93, respectively, which was profoundly higher than those of the SiC counterpart and most of reported positive piezoresistive SiC sensors.

CsPbI3 Nanotube Photodetectors with High Detectivity.

In the present work, the exploration of photodetectors (PDs) based on CsPbI3 nanotubes are reported. The as-prepared CsPbI3 nanotubes can be stable for more than 2 months under air conditions. It is found that, in comparison to the nanowires, nanobelts, and nanosheets, the nanotubes can be advantageous to be used as the functional units for PDs, which is mainly attributed to the enhanced light absorption ability induced by the light trapping effect within the tube cavity. As a proof of concept, the as-constructed PDs based on CsPbI3 nanotube present an overall excellent performance with a responsivity (Rλ ), external quantum efficiency (EQE) and detectivity of 1.84 × 103 A W-1 , 5.65 × 105 % and 9.99 × 1013 Jones, respectively, which are all comparable to state-of-the-art ones for all-inorganic perovskite PDs.

Hydrogenated TiO2 Nanorod Arrays Decorated with Carbon Quantum Dots toward Efficient Photoelectrochemical Water Splitting.

Limited light harvesting and charge collection are recognized as grand challenges for the exploration of highly efficient TiO2 photoanodes. To overcome these intrinsic shortcomings, we reported the designed photoanode based on TiO2 nanoarrays with both hydrogenation treatment and surface decoration of carbon quantum dots (CQDs) toward efficient photoelectrochemical water splitting. The results revealed that hydrogenation treatment could cause the formation of oxygen vacancies to suppress the recombination of photoinduced carriers. Meanwhile, the decorated CQDs could not only play as the electron reservoirs to trap photoinduced electrons but also remarkably enhance the solar light harvesting due to their upconversion effect. The as-fabricated photoanodes exhibited a large photocurrent density of ∼3.0 mA/cm2 at 1.23 V versus reversible hydrogen electrode under simulated sunlight, which was the highest one among hydrogenated TiO2 photoanodes ever reported and was ∼6 times that of pristine analogues.

Genome-wide variation patterns between landraces and cultivars uncover divergent selection during modern wheat breeding.

KEY MESSAGE: Genetic diversity, population structure, LD decay, and selective sweeps in 687 wheat accessions were analyzed, providing relevant guidelines to facilitate the use of the germplasm in wheat breeding. Common wheat (Triticum aestivum L.) is one of the most widely grown crops in the world. Landraces were subjected to strong human-mediated selection in developing high-yielding, good quality, and widely adapted cultivars. To investigate the genome-wide patterns of allelic variation, population structure and patterns of selective sweeps during modern wheat breeding, we tested 687 wheat accessions, including landraces (148) and cultivars (539) mainly from China and Pakistan in a wheat 90 K single nucleotide polymorphism array. Population structure analysis revealed that cultivars and landraces from China and Pakistan comprised three relatively independent genetic clusters. Cultivars displayed lower nucleotide diversity and a wider average LD decay across whole genome, indicating allelic erosion and a diversity bottleneck due to the modern breeding. Analysis of genetic differentiation between landraces and cultivars from China and Pakistan identified allelic variants subjected to selection during modern breeding. In total, 477 unique genome regions showed signatures of selection, where 109 were identified in both China and Pakistan germplasm. The majority of genomic regions were located in the B genome (225), followed by the A genome (175), and only 77 regions were located in the D genome. EigenGWAS was further used to identify key selection loci in modern wheat cultivars from China and Pakistan by comparing with global winter wheat and spring wheat diversity panels, respectively. A few known functional genes or loci found within these genome regions corresponded to known phenotypes for disease resistance, vernalization, quality, adaptability and yield-related traits. This study uncovered molecular footprints of modern wheat breeding and explained the genetic basis of polygenic adaptation in wheat. The results will be useful for understanding targets of modern wheat breeding, and in devising future breeding strategies to target beneficial alleles currently not pursued.

WO3/BiVO4 Type-II Heterojunction Arrays Decorated with Oxygen-Deficient ZnO Passivation Layer: A Highly Efficient and Stable Photoanode.

In the present work, we report a ternary WO3/BiVO4/ZnO photoanode with boosted PEC efficiency and stability toward highly efficient water splitting. The type-II WO3/BiVO4 heterojunction arrays are firstly prepared by hydrothermal growth of WO3 nanoplate arrays onto the substrates of fluorine-doped tin oxide (FTO)-coated glass, followed by spin-coating of BiVO4 layers onto the WO3 nanoplate surfaces. After that, thin ZnO layers are further introduced onto the WO3/BiVO4 heterojunction arrays via atomic layer deposition (ALD), leading to the construction of ternary WO3/BiVO4/ZnO photoanodes. It is verified that the ZnO thin layer in the WO3/BiVO4/ZnO photoanode contains abundant oxygen vacancies, which could act as an effective passivation layer to enhance the charge separation and surface water oxidation kinetics of photogenerated carriers. The as-prepared WO3/BiVO4/ZnO photoanode produces a photocurrent of 2.96 mA cm-2 under simulated sunlight with an incident photon-to-current conversion efficiency (IPCE) of ∼72.8% at 380 nm at a potential of 1.23 V versus RHE without cocatalysts, both of which are comparable to the state-of-the-art WO3/BiVO4 counterparts. Moreover, the photocurrent of the WO3/BiVO4/ZnO photoanode shows only 9% decay after 6 h, suggesting its high photoelectrochemical (PEC) stability.

Genome-Wide Linkage Mapping Reveals QTLs for Seed Vigor-Related Traits Under Artificial Aging in Common Wheat (Triticum aestivum).

Long-term storage of seeds leads to lose seed vigor with slow and non-uniform germination. Time, rate, homogeneity, and synchrony are important aspects during the dynamic germination process to assess seed viability after storage. The aim of this study is to identify quantitative trait loci (QTLs) using a high-density genetic linkage map of common wheat (Triticum aestivum) for seed vigor-related traits under artificial aging. Two hundred and forty-six recombinant inbred lines derived from the cross between Zhou 8425B and Chinese Spring were evaluated for seed storability. Ninety-six QTLs were detected on all wheat chromosomes except 2B, 4D, 6D, and 7D, explaining 2.9-19.4% of the phenotypic variance. These QTLs were clustered into 17 QTL-rich regions on chromosomes 1AL, 2DS, 3AS (3), 3BS, 3BL (2), 3DL, 4AS, 4AL (3), 5AS, 5DS, 6BL, and 7AL, exhibiting pleiotropic effects. Moreover, 10 stable QTLs were identified on chromosomes 2D, 3D, 4A, and 6B (QaMGT.cas-2DS.2, QaMGR.cas-2DS.2, QaFCGR.cas-2DS.2, QaGI.cas-3DL, QaGR.cas-3DL, QaFCGR.cas-3DL, QaMGT.cas-4AS, QaMGR.cas-4AS, QaZ.cas-4AS, and QaGR.cas-6BL.2). Our results indicate that one of the stable QTL-rich regions on chromosome 2D flanked by IWB21991 and IWB11197 in the position from 46 to 51 cM, presenting as a pleiotropic locus strongly impacting seed vigor-related traits under artificial aging. These new QTLs and tightly linked SNP markers may provide new valuable information and could serve as targets for fine mapping or markers assisted breeding.

Mapping and validation of a new QTL for adult-plant resistance to powdery mildew in Chinese elite bread wheat line Zhou8425B.

KEY MESSAGE: Four QTLs for adult-plant resistance to powdery mildew were mapped in the Zhou8425B/Chinese Spring population, and a new QTL on chromosome 3B was validated in 103 wheat cultivars derived from Zhou8425B. Zhou8425B is an elite wheat (Triticum aestivum L.) line widely used as a parent in Chinese wheat breeding programs. Identification of genes for adult-plant resistance (APR) to powdery mildew in Zhou8425B is of high importance for continued controlling the disease. In the current study, the high-density Illumina iSelect 90K single-nucleotide polymorphism (SNP) array was used to map quantitative trait loci (QTL) for APR to powdery mildew in 244 recombinant inbred lines derived from the cross Zhou8425B/Chinese Spring. Inclusive composite interval mapping identified QTL on chromosomes 1B, 3B, 4B, and 7D, designated as QPm.caas-1BL.1, QPm.caas-3BS, QPm.caas-4BL.2, and QPm.caas-7DS, respectively. Resistance alleles at the QPm.caas-1BL.1, QPm.caas-3BS, and QPm.caas-4BL.2 loci were contributed by Zhou8425B, whereas that at QPm.caas-7DS was from Chinese Spring. QPm.caas-3BS, likely to be a new APR gene for powdery mildew resistance, was detected in all four environments. One SNP marker closely linked to QPm.caas-3BS was transferred into a semi-thermal asymmetric reverse PCR (STARP) marker and tested on 103 commercial wheat cultivars derived from Zhou8425B. Cultivars with the resistance allele at the QPm.caas-3BS locus had averaged maximum disease severity reduced by 5.3%. This STARP marker can be used for marker-assisted selection in improvement of the level of powdery mildew resistance in wheat breeding.