Green Synthesis of Zinc Oxide Nanoparticles from Sida acuta Leaf Extract for Antibacterial and Antioxidant Applications, and Catalytic Degradation of Dye through the use of Convolutional Neural Network.

This study synthesized zinc oxide nanoparticles (ZnO NPs) using a novel green approach, with Sida acuta leaf extract as a capping and reducing agent to initiate nucleation and structure formation. The innovation of this study lies in demonstrating the originality of utilizing zinc oxide nanoparticles for antibacterial action, antioxidant potential, and catalytic degradation of Congo red dye. This unique approach harnesses eco-friendly methods to initiate nucleation and structure formation. The synthesized nanoparticles' structure and conformation were characterized using UV-vis (λmax = 280nm), X-ray, atomic force microscopy, SEM, HR-TEM and FTIR. The antibacterial activity of the Nps was tested against Pseudomonas sp, Klebsiella sp, Staphylococcus aureus, and E. coli, demonstrating efficacy. The nanoparticles exhibited unique properties, with a crystallite size of 20 nm (XRD), a surface roughness of 2.5 nm (AFM), and a specific surface area of 60 m2/g (SEM). A Convolutional Neural Network (CNN) was effectively employed to accurately classify and analyze microscopic images of green-synthesized zinc oxide nanoparticles. This research revealed their exceptional antioxidant potential, with an average DPPH scavenging rate of 80% at a concentration of 0.05 mg/mL. Additionally, zeta potential measurements indicated a stable net negative surface charge of approximately -12.2 mV. These quantitative findings highlight the promising applications of green-synthesized ZnO NPs in healthcare, materials science, and environmental remediation. The ZnO nanoparticles exhibited catalytic capabilities for dye degradation, and the degradation rate was determined using UV spectroscopy. Key findings of the study encompass the green synthesis of versatile zinc oxide nanoparticles, demonstrating potent antibacterial action, antioxidant capabilities, and catalytic dye degradation potential. These nanoparticles offer multifaceted solutions with minimal environmental impact, addressing challenges in various fields, from healthcare to environmental remediation.

A review on optimistic development of polymeric nanocomposite membrane on environmental remediation.

Current health and environmental concerns about the abundance and drawbacks of municipal wastewater as well as industrial effluent have prompted the development of novel and innovative treatment processes. A global shortage of clean water poses significant challenges to the survival of all life forms. For the removal of both biodegradable and non-biodegradable harmful wastes/pollutants from water, sophisticated wastewater treatment technologies are required. Polymer membrane technology is critical to overcoming this major challenge. Polymer matrix-based nanocomposite membranes are among the most popular in polymer membrane technology in terms of convenience. These membranes and their major components are environmentally friendly, energy efficient, cost effective, operationally versatile, and feasible. This review provides an overview of the drawbacks as well as promising developments in polymer membrane and nanocomposite membranes for environmental remediation, with a focus on wastewater treatment. Additionally, the advantages of nanocomposite membranes such as stability, antimicrobial properties, and adsorption processes have been discussed. The goal of this review was to summarize the remediation of harmful pollutants from water and wastewater/effluent using polymer matrix-based nanocomposite membrane technology, and to highlight its shortcomings and future prospects.

Decoration of ZnO surface with tiny sulfide-based nanoparticles for improve photocatalytic degradation efficiency.

Modifying wide band gap ZnO nanoparticles surface by combine narrow bandgap semiconductors is a novel route to promote the ZnO to diverse applications. Herein, different metal sulfides (CdS, Ag2S and Bi2S3) were decorated on ZnO surface using facile a chemical route for photocatalytic application. Crystal structure, surface morphology and optical changes for the surface modified ZnO were studied by using various characterization techniques. The XRD spectra exhibited mixed phase of decorated metal sulfide nanoparticles along with strong pattens of hexagonal structure ZnO. The SEM images were confirmed that tiny CdS, Ag2S and Bi2S3 sulfide nanoparticles are well decorated on ZnO hexagonal rods surface. Band gap of the ZnO was tuned into visible region by modifying the surface by the sulfide nanoparticles. Textile industry-based crystal violet (CV) dye was used as a model pollutant to evaluate the photocatalytic activity of sulfides decorated well-crystalline ZnO photocatalysts under natural sunlight. Among the three catalysts, the Ag2S decorated ZnO achieved greatest photodegradation efficiency of 94.1% for degradation of the CV dye with rate constant value of 0.050. The highest catalytic activity may be related to Ag2S acting a significant part in reducing bandgap and boosting hole, superoxide radical, and hydroxyl radical formation, which inhibits recombination, hence enhancing the photocatalyst's efficacy, activity, and also stability.

Optimistic and possible contribution of nanomaterial on biomedical applications: A review.

Nanomaterials have many advantages over bulk materials, including enhanced surface-to-volume proportion as well as magnetic traits. It has been a steady rise in research with using nanomaterials in various biomedical fields in the past few decades. Constructing nanomaterials has emerged as a leading research primary concern in order to discover specialized biomedical applications. Since, their advantageous properties including chemical stability, non-toxicity, bio - compatibility, relatively high magnetization, and strong magnetic vulnerability, nanoparticles of iron oxide had already influenced implementations in different biomedical fields. Nanomaterials can be divided up into four nanomaterials such as metallic nanomaterials, bimetallic or alloy nanomaterials, metal oxide nanomaterials, as well as magnetic nanomaterials. Hence, the purpose of this review is to conduct such in discussion on emerging advancements in nanomaterials for biomedical, with such a special emphasis upon those options of nanomaterials including metallic nanomaterials: Au and Ag, bimetallic nanomaterials: Fe-Co and Fe-Pt, and metal oxides: TiO2 and CeO2. Securing this information gap will result in a better comprehension of the contribution of nanomaterial type and subsequent huge-scale applications in aspects of both their potential and challenges.

Bio-functionalized copper oxide/chitosan nanocomposite using Sida cordifolia and their efficient properties of antibacterial, anticancer activity against on breast and lung cancer cell lines.

Nanoparticles synthesis from green chemistry method is gaining a lot of attention due to their non-toxic, low cost and facile. In this study, a copper oxide nanoparticle (CuO NPs) was synthesized using Sida cordifolia aqueous leaf extract and incorporated chitosan biomolecules to potential enhancing of biological properties. The CuO NPs and chitosan (CS) embedded nanocomposite was noted as CuO-CS nanocomposite, its was physicochemical characterized by using of UV-Visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), X-ray Diffraction (XRD) and Field emission scanning electron microscopy (FE-SEM) with Energy dispersive X-ray (EDX) analysis. Bio-functionalized CuO-CS nanocomposite was performed antibacterial efficiency against both Gram positive (Staphylococcus aureus, Bacillus subtilis) and Gram negative (Salmonella typhi, Escherichia coli) bacteria through the Mueller Hinton agar (MHA) well diffusion techniques. The highest bactericidal activity was revealed Gram positive of B. subtilis and Gram negative of S. typhi bacteria, respectively. Further, the cytotoxicity effect of biosynthesized nanocomposite was an examined against human breast cancer MDA-MB-231 and lung cancer A549 cell lines. The half maximal inhibitory concentration is showed at 2 µg/mL for MDA-MB-231and 4 µg/mL was A549 cells. Live/dead cells were detected by fluorescence microscopic observation at the IC50 concentration. In furthermore, bio-functionalized CuO-CS nanocomposite was performed photocatatlytic dye degradation against for industrial dyes of crystal violet (CV) and malachite green (MG). From the results, synergic bio-functionalized CuO-CS nanocomposite was suggested potential suitable for biomedical applications as well as industrial wastewater treatment.

Remediation competence of nanoparticles amalgamated biochar (nanobiochar/nanocomposite) on pollutants: A review.

Advanced biochar blended nanoparticles substances, such as nano biochar or nanocomposites, have provided long-term solutions to a wide range of modern-day problems. Biochar blended nano-composites can be created to create better composite materials that combine the benefits of biochar and nanoparticles. Such materials have been typically improved with active functional groups, porous structure, active surface area, catalytic deterioration ability, as well as easy recovery or separation of pollutants. Such biochar-basednanocomposites have good adsorption properties for a variety of pollutants in various form of polluted medium (soil and water contamination). Catalytic nanoparticle encapsulated biochar, can perform concurrently the adsorption (by biochar) as well as catalytic degradation (nanoparticles) functions for pollutants removal from polluted sites. In this review, the advanced and practically feasible techniques involved in the biochar blended nanoparticles-based nanocomposites have been discussed with environmental applications. Furthermore, the mechanisms involved in this composite material in remediation, as well as the advantages and disadvantages of biochar blended nanoparticles-based nanocomposites, were discussed, and future directions for study in this field were suggested.

Nanofibrous/biopolymeric membrane a sustainable approach to remove organic micropollutants: A review.

Aquifers are severely polluted with organic and inorganic pollutants, posing a serious threat to the global ecological system's balance. While various traditional methods are available, the development of innovative methods for effluent treatment and reuse is critical. Polymers have recently been widely used in a variety of industry sectors due to their unique properties. Biopolymers are a biodegradable material that is also a viable alternative to synthetic polymers. Biopolymers are preferably obtained from cellulose and carrageenan molecules from various biological sources. While compared with conventional non-biodegradable polymeric materials, the biopolymer possesses unique characteristics such as renewability, cost-effectiveness, biodegradability, and biocompatibility. The improvements towards the biopolymeric (natural) membranes have also been thoroughly discussed. The use of nanofillers to stabilise and improve the effectiveness of biopolymeric membranes in the elimination of organic pollutants is one of the most recent developments. This was discovered that the majority of biopolymeric membranes technology consolidated on organic pollutants. More research should be directed toward against emerging organic/persistent organic pollutants (POP) and micropollutants. Furthermore, processes for regenerating and reusing utilized biopolymer-based carbon - based materials are emphasized.

Comparative study of zinc oxide nanoparticles synthesized through biogenic and chemical route with reference to antibacterial, antibiofilm and anticancer activities.

The present focused on comparative study on synthesis of ZnO nanoparticles (ZnO NPs) using chemical method via alkaline precipitation method (ZnO(A) NPs) using NaOH and biogenic method using termite mound extract (ZnO(B) NPs). GC-MS analysis revealed that D-limonene present in termite mound extract might be responsible for the synthesis of ZnO(B) NPs. XRD patterns confirmed hexagonal crystalline structure of ZnO(A) and (B) NPs. Results of antibacterial activity illustrated that ZnO(B) NPs showed its potential against Pseudomonas aeruginosa, ESBL-1, ESBL-2 and EBSL-3. Antibiofilm studies revealed that ZnO(B) NPs exhibited optimum decline in MRSA biofilm formation than ZnO(A) NPs. In addition, ZnO(B) NPs showed potent cytotoxic effect against lung cancer cell lines A549 with IC50 of 35.16 ± 0.10 µg/mL in comparison with ZnO(A) NPs (IC50- 55.09 ± 0.30 µg/mL). Overall, the results revealed that biogenic synthesis of ZnO NPs ensures its biosafety level and enhanced biological activity when compared to chemical synthesis method.