Prefeasibility analysis of biomass gasification and electrolysis for hydrogen production.

Hydrogen is a key energy vector to accomplishing energy transition and decarbonization goals proposed in the transport and industrial sectors worldwide. In recent years, research has focused on analyzing, designing, and optimizing hydrogen production, searching to improve economic prefeasibility with minimal emissions of polluting gases. Therefore, the techno-economic analysis of hydrogen production by electrolytic and gasification processes becomes relevant since these processes could compete commercially with industrial technologies such as SMR - Steam methane reforming. This work aims to analyze hydrogen production in stand-alone processes and energy-driven biorefineries. The gasification and electrolysis technologies were evaluated experimentally, and the yields obtained were input data for scaling up the processes through simulation tools. Biomass gasification is more cost-effective than electrolytic schemes since the hydrogen production costs were 4.57 USD/kg and 8.30 USD/kg at an annual production rate of 491.6 tons and 38.96 tons, respectively. Instead, the electrolysis process feasibility is strongly influenced by the recycled water rate and the electricity cost. A sensitivity analysis was performed to evaluate the temperature, pressure, and current density variability on the hydrogen production rate. The increase in pressure and current density induces parasitic currents while the temperature increases hydrogen production. Although higher hydrogen production rates from gasification, the syngas composition decreases the possibility of being implemented in applications where purity is critical.

Valorization Alternatives of Tropical Forest Fruits Based on the Açai (Euterpe oleracea) Processing in Small Communities.

Many plant species characterize tropical forests, and a small fraction has been studied to favor small communities in the food and medicinal fields. The high biodiversity of these regions allows for the proposed alternatives for the valorization of exotic fruits due to their rich content of value-added compounds that benefit human health. This work focuses on improving the nutritional characteristics of the açai production chain by mixing it with noni and araza. As a main result, it was possible to enhance the organoleptic and nutritional characteristics of the fruits after freeze-drying. Then, the seeds and peels of the fruits were valorized by the extraction of bioactive compounds with conventional methods and biogas production by anaerobic digestion. The best compositions of antioxidant capacity and total phenolic compounds were obtained for the extracts based on the araza peel, with values of 116.4 µmol and 276.6 mg of gallic acid per 100 g of raw material, respectively. Regarding biogas production, the anaerobic digestion performance was influenced by the C/N ratio. The experimental results were used as input to simulate small-scale processes. From a technical point of view, the scheme of açai, noni, and araza mixture (Sc. 4) showed the highest mass yields (0.84 kg products/kg RM) and energy requirement (2.54 kW/kg RM). On the other hand, the processing of single açai (Sc. 1) presented the lowest capital costs (1.37 M-USD) and operating costs (0.89 M-USD/year). However, all scenarios showed techno-economic feasibility and demonstrated the potential of these fruits to valorize the açai market.

Analysis of Single-Step Pretreatments for Lignocellulosic Platform Isolation as the Basis of Biorefinery Design.

Biorefinery feasibility is highly influenced by the early design of the best feedstock transformation pathway to obtain value-added products. Pretreatment has been identified as the critical stage in biorefinery design since proper pretreatment influences subsequent reaction, separation, and purification processes. However, many pretreatment analyses have focused on preserving and valorizing six-carbon sugars for future use in bioconversion processes, leaving aside fractions such as hemicellulose and lignin. To date, there has been no pretreatment systematization for the removal of lignocellulosic fractions. This work defines pretreatment efficacy through operational, economic, environmental, and social indicators. Thus, using the data reported in the literature, as well as the results of the simulation schemes, a multi-criteria weighting of the best-performing schemes for the isolation or removal of cellulose, hemicellulose, and lignin was carried out. As a main result, it was concluded that dilute acid is the most effective for cellulose isolation and hemicellulose removal for producing platform products based on six- and five-carbon sugars, respectively. Additionally, the kraft process is the best methodology for lignin removal and its future use in biorefineries. The results of this work help to elucidate a methodological systematization of the pretreatment efficacy in the design of biorefineries as an early feasibility stage considering sustainability aspects.

Effect of Beta-Blocker Cardioselectivity on Vascular Refilling in Hemodialysis Patients.

BACKGROUND: ß-Blockers are the most frequently prescribed cardioprotective drugs in hemodialysis (HD) patients, despite their weak evidence. We sought to evaluate the effects of ß-blockers on vascular refilling during HD treatments and examine whether carvedilol, for being noncardioselective and poorly dialyzable, associates more impact than others. METHODS: The study was performed in a cohort of maintenance HD patients from a tertiary center. All patients had previous ß-blocker prescription. We conducted a prospective crossover study and measured vascular refilling volume (Vref) and vascular refilling fraction (Fref) in 2 circumstances: under ß-blocker treatment (ßb profile) and without ß-blocker effect (non-ßb profile). RESULTS: Twenty patients were included, 10 of whom were treated with carvedilol. Predialysis values were comparable between the 2 profiles. Although the ßb profile showed lower Vref and higher ABV drop, these differences did not reach statistical significance. Data showed an increase in Fref in the non-ßb profile (70.01 ± 6.80% vs. 63.14 ± 11.65%; p = 0.015). The ßb profile associated a significantly higher risk of intradialytic hypotension (IDH) (risk ratio 2.40; 95% CI: 1.04-5.55). When analyzing separately the carvedilol group, patients dialyzed under drug effect experienced a significant impairment in Vref, Fref, and refilling rate. CONCLUSIONS: Administering ß-blockers before HD associated a higher risk of IDH and a decrease in Fref. Patients dialyzed under carvedilol effect showed an impaired refilling, probably related to its noncardioselectivity and lower dializability.

Chemical changes in Ulmus minor xylem tissue after salicylic acid or carvacrol treatments are associated with enhanced resistance to Ophiostoma novo-ulmi.

Application of endogenous plant hormone salicylic acid (SA) or essential oil component carvacrol (CA) in elms enhances tree resistance to the Dutch elm disease pathogen, although the effect of these compounds on tree metabolism is unknown. The chemical changes induced by SA or CA treatments in Ulmus minor were studied through gas chromatography-mass spectrometry (GC-MS) analysis of xylem tissues. Treatments consisted of fortnightly irrigating seedlings with water, SA or CA at 600 mg L⁻¹. The chemical composition of the xylem tissues sampled from treated trees was significantly altered depending on the treatment type. SA treatment induced an accumulation of the sinapyl alcohol, a precursor of lignin and other phenylpropanoid-derived products. CA treatment induced an accumulation of the methyl esters of palmitic, linoleic and stearic acids. Both treatments resulted in early bud burst and SA significantly reduced sapwood radial growth, possibly as a consequence of a trade-off between tree growth and tree defence. The enhanced resistance provided by these treatments is discussed.

Characterization of surface treatments of cork stoppers by FTIR-ATR.

A general method is described for the identification of paraffin- and silicone-based surface treatments applied to single-piece natural and 1 + 1 (cork agglomerate with two natural cork disks) cork stoppers used to seal wine bottles. The method is based on Fourier transformed infrared spectroscopy (FTIR) and attenuated total reflectance (ATR) analysis of ready-for-use stoppers. The absorbance in seven wavelength bands selected as the most characteristic (2916 and 2850 cm(-)(1), for paraffins, and 2963, 1258, 1079, 1010, and 787 cm(-)(1), for silicones) was measured for both kinds of stoppers. Univariate analysis of the results enabled identification of stoppers that had received surface treatment by measuring the absorbance in two of the selected bands, representing paraffins and silicones, respectively. The type of surface treatment used was identified by discriminant analysis. Using this technique, we constructed a mathematical model using the seven bands studied. The model correctly classified 100% of the stoppers used to construct it and 91.7% of the stoppers used for validation.