Comparative evaluation of dissolution profiles of the generic drug lamivudine 150 mg tablet marketed in Peru vs. the innovative Epivir. / Evaluación comparativa de perfiles de disolución del medicamento genérico lamivudina tableta 150 mg comercializado en Perú frente al innovador Epivir.

Lamivudine is one of the most prescribed drugs in the world, and is used to treat human immunodeficiency and hepatitis B. This study aimed to evaluate the quality attributes and compare the dissolution profiles of two batches (A and B) of generic lamivudine 150 mg tablets with the innovator drug Epivir 150 mg tablets. We conducted an analytical, experimental, cross-sectional study, and used a spectrophotometric method at a wavelength of maximum absorption (λ) corresponding to 270 nm, to measure the percentage of dissolved drug. The study evaluated identification, content, dissolution and mass uniformity. Apparatus 2 USP (Paddle) 75 rpm, 900 mL of dissolution medium (37 ± 0.5 °C) was used in three dissolution media: pH 1.2; 4.5 and 6.8. Samples of 5 mL were obtained at 5, 10, 15, 20 and 30 min. Both batches of generic lamivudine (A and B) were found to have the same dissolution kinetic profile as the innovator drug. Both formulations met the criteria of very fast dissolving (85% dissolved in 15 min), and fast dissolving (85% dissolved in 30 min) drugs. Therefore, it was not necessary to calculate the similarity factor. We concluded that generic drugs A and B are in vitro equivalents to the innovator drug Epivir. Motivation for the study. To evaluate the quality of antiretroviral drugs used in the treatment of HIV dispensed in the HAART Program of the Ministry of Health of Peru. Main findings. Two batches of generic lamivudine drugs were found to achieve a dissolution rate greater than 85% at 15 min, being equivalent in vitro to the reference product Epivir. Implications. There is a need to apply the current regulations regarding equivalence between drugs by the regulatory authority prior to their authorization and to include dissolution profile tests as a requirement in public drug purchases, especially in national strategies (HIV, TB, etc.), in order to ensure quality products for the population.

La lamivudina es uno de los medicamentos más prescritos en el mundo, se utiliza para tratar la inmunodeficiencia humana y la hepatitis B. El objetivo del estudio fue evaluar los atributos de calidad y comparar los perfiles de disolución de dos lotes (A y B) del medicamento genérico lamivudina 150 mg tabletas con el medicamento innovador Epivir 150 mg tabletas. Se realizó un estudio analítico, experimental y de corte transversal, se usó un método espectrofotométrico a una longitud de onda de máxima absorción (λ) correspondiente a 270 nm, para medir el porcentaje de fármaco disuelto. El estudio evaluó identificación, contenido, disolución y uniformidad de masas. Se usó el aparato 2 USP (Paleta) 75 rpm, 900 mL de medio de disolución (37 ± 0,5 °C) a en tres medios de disolución: pH 1,2; 4,5 y 6,8. Se retiraron muestras de 5 mL a los 5, 10, 15, 20 y 30 min. Se encontró que ambos lotes de lamivudina genérico (A y B) presentan el mismo perfil cinético de disolución que el medicamento innovador. Ambas formulaciones cumplen con el criterio de medicamentos de disolución muy rápida (85% disuelto en 15 min), y de disolución rápida (85% disuelto en 30 min). Por lo tanto, no fue necesario calcular el factor de similitud. Se concluye que los medicamentos genéricos A y B son equivalentes in vitro con el medicamento innovador Epivir. Motivación para realizar el estudio. Evaluar la calidad de los medicamentos antirretrovirales usados en el tratamiento del VIH dispensados en el Programa TARGA del Ministerio de Salud de Perú. Principales hallazgos. Se encontró que dos lotes de medicamentos genéricos de lamivudina alcanzaron un porcentaje de disolución mayor del 85% a los 15 min, siendo equivalentes in vitro al producto de referencia Epivir. Implicancias. Existe la necesidad de aplicar la normatividad vigente respecto a equivalencia entre fármacos por parte de la autoridad regulatoria previo a su autorización e incluir ensayos de perfil de disolución como requisito en las compras públicas de medicamentos, especialmente en las estrategias nacionales (VIH, TBC, etc.), con la finalidad de asegurar productos de calidad para la población.

Development of cationic solid lipid nanoparticles incorporating cholesteryl-9-carboxynonanoate (9CCN) for delivery of antagomiRs to macrophages.

Lipid-based nanoparticles are a useful tool for nucleic acids delivery and have been regarded as a promising approach for diverse diseases. However, off-targets effects are a matter of concern and some strategies to improve selectivity of solid lipid nanoparticles (SLNs) were reported. The goal of this study was to test formulations of SLNs incorporating lipid cholesteryl-9-carboxynonanoate (9CCN) as "eat-me" signal to target antagomiR oligonucleotides to macrophages. We formulate four SLNs, and those with a mean diameter of 200 nm and a Z-potential values between 25 and 40 mV, which allowed the antagomiR binding, were selected for in vitro studies. Cell viability, transfection efficiency and cellular uptake assays were performed within in vitro macrophages using flow cytometry and confocal imaging and the SLNs incorporating 25 mg of 9CCN proved to be the best formulation. Subsequently, we used a labeled antagomiR to study tissue distribution in in-vivo ApoE-/- model of atherosclerosis. Using the ApoE-/- model we demonstrated that SLNs with phagocytic signal 9-CCN target macrophages and release the antagomiR cargo in a selective way.

Evaluación comparativa de perfiles de disolución del medicamento genérico lamivudina tableta 150 mg comercializado en Perú frente al innovador Epivir / Comparative evaluation of dissolution profiles of the generic drug lamivudine 150 mg tablet marketed in Peru vs. the innovative Epivir

RESUMEN La lamivudina es uno de los medicamentos más prescritos en el mundo, se utiliza para tratar la inmunodeficiencia humana y la hepatitis B. El objetivo del estudio fue evaluar los atributos de calidad y comparar los perfiles de disolución de dos lotes (A y B) del medicamento genérico lamivudina 150 mg tabletas con el medicamento innovador Epivir 150 mg tabletas. Se realizó un estudio analítico, experimental y de corte transversal, se usó un método espectrofotométrico a una longitud de onda de máxima absorción (λ) correspondiente a 270 nm, para medir el porcentaje de fármaco disuelto. El estudio evaluó identificación, contenido, disolución y uniformidad de masas. Se usó el aparato 2 USP (Paleta) 75 rpm, 900 mL de medio de disolución (37 ± 0,5 °C) a en tres medios de disolución: pH 1,2; 4,5 y 6,8. Se retiraron muestras de 5 mL a los 5, 10, 15, 20 y 30 min. Se encontró que ambos lotes de lamivudina genérico (A y B) presentan el mismo perfil cinético de disolución que el medicamento innovador. Ambas formulaciones cumplen con el criterio de medicamentos de disolución muy rápida (85% disuelto en 15 min), y de disolución rápida (85% disuelto en 30 min). Por lo tanto, no fue necesario calcular el factor de similitud. Se concluye que los medicamentos genéricos A y B son equivalentes in vitro con el medicamento innovador Epivir.

ABSTRACT Lamivudine is one of the most prescribed drugs in the world, and is used to treat human immunodeficiency and hepatitis B. This study aimed to evaluate the quality attributes and compare the dissolution profiles of two batches (A and B) of generic lamivudine 150 mg tablets with the innovator drug Epivir 150 mg tablets. We conducted an analytical, experimental, cross-sectional study, and used a spectrophotometric method at a wavelength of maximum absorption (λ) corresponding to 270 nm, to measure the percentage of dissolved drug. The study evaluated identification, content, dissolution and mass uniformity. Apparatus 2 USP (Paddle) 75 rpm, 900 mL of dissolution medium (37 ± 0.5 °C) was used in three dissolution media: pH 1.2; 4.5 and 6.8. Samples of 5 mL were obtained at 5, 10, 15, 20 and 30 min. Both batches of generic lamivudine (A and B) were found to have the same dissolution kinetic profile as the innovator drug. Both formulations met the criteria of very fast dissolving (85% dissolved in 15 min), and fast dissolving (85% dissolved in 30 min) drugs. Therefore, it was not necessary to calculate the similarity factor. We concluded that generic drugs A and B are in vitro equivalents to the innovator drug Epivir.

Comparative Analysis of the Physicochemical and Biological Characteristics of Freeze-Dried PEGylated Cationic Solid Lipid Nanoparticles.

Cationic solid-lipid nanoparticles (cSLNs) have become a promising tool for gene and RNA therapies. PEGylation (PEG) is crucial in enhancing particle stability and protection. We evaluated the impact of PEG on the physicochemical and biological characteristics of cholesteryl-oleate cSLNs (CO-cSLNs). Several parameters were analyzed, including the particle size, polydispersity index, zeta potential, shape, stability, cytotoxicity, and loading efficiency. Five different formulations with specific PEGs were developed and compared in both suspended and freeze-dried states. Small, homogeneous, and cationic suspended nanoparticles were obtained, with the Gelucire 50/13 (PEG-32 hydrogenated palm glycerides; Gelucire) and DSPE-mPEG2000 (1,2-distearoyl-phosphatidylethanolamine-methyl-polyethyleneglycol conjungate-2000; DSPE) formulations exhibiting the smallest particle size (~170 nm). Monodisperse populations of freeze-dried nanoparticles were also achieved, with particle sizes ranging from 200 to 300 nm and Z potential values of 30-35 mV. Notably, Gelucire again produced the smallest particle size (211.1 ± 22.4), while the DSPE and Myrj S100 (polyoxyethylene (100) stearate; PEG-100 Stearate) formulations had similar particle sizes to CO-cSLNs (~235 nm). The obtained PEGylated nanoparticles showed suitable properties: they were nontoxic, had acceptable morphology, were capable of forming SLNplexes, and were stable in both suspended and lyophilized states. These PEG-cSLNs are a potential resource for in vivo assays and have the advantage of employing cost-effective PEGs. Optimizing the lyophilization process and standardizing parameters are also recommended to maintain nanoparticle integrity.

Methods for Developing a Process Design Space Using Retrospective Data.

Prospectively planned designs of experiments (DoEs) offer a valuable approach to preventing collinearity issues that can result in statistical confusion, leading to misinterpretation and reducing the predictability of statistical models. However, it is also possible to develop models using historical data, provided that certain guidelines are followed to enhance and ensure proper statistical modeling. This article presents a methodology for constructing a design space using process data, while avoiding the common pitfalls associated with retrospective data analysis. For this study, data from a real wet granulation process were collected to pragmatically illustrate all the concepts and methods developed in this article.

SeDeM as a Tool to Validate Drug Substance Manufacturing Processes and Assess Scalability and Suitability for Direct Compression: Supplier Screening.

During the development of an oral solid form of a drug substance, a thorough understanding of the critical material attributes is necessary, as the physical properties of the active pharmaceutical ingredient (API) can profoundly influence the drug product's manufacturability, critical quality attributes, and bioavailability. The objective of this study was to validate the manufacturing process of the drug Linezolid from three different sources at both the pilot and industrial scale and to identify differences in critical material attributes between the API manufacturers. Furthermore, the scalability factor between the pilot and industrial scale and the suitability of a process for direct compression were also evaluated. In the present study, the different sources of API were characterized by SeDeM methodology, particle size distribution, and scanning electron microscopy determinations. The statistical analysis revealed that no statistically significant differences were found for any of the parameters under study for the same API source analyzed on both scales. On the other hand, for most of the parameters evaluated, statistical differences were observed between the different sources. It was concluded that SeDeM was able to successfully validate the API manufacturing process, assess scalability, and distinguish between sources. Therefore, it could be highly valuable in the formulation phase to select the best API source.

Pellets and gummies: Seeking a 3D printed gastro-resistant omeprazole dosage for paediatric administration.

The production of 3D printed pharmaceuticals has thrived in recent years, as it allows the generation of customised medications in small batches. This is particularly helpful for patients who need specific doses or formulations, such as children. Compounding pharmacies seek alternatives to conventional solid oral doses, opting for oral liquid formulations. However, ensuring quality and stability, especially for pH-sensitive APIs like omeprazole, remains a challenge. This paper presents the application of semi-solid extrusion 3D printing technology to develop patient-tailored medicinal gummies, with an eye-catching appearances, serving as an innovative omeprazole pharmaceutical form for paediatric use. The study compares 3D printing hydrogels with dissolved omeprazole to hydrogels loaded with gastro-resistant omeprazole pellets, a ground-breaking approach.. Gastro-resistance and dissolution profiles were studied using different methods for better comparison and to emphasize the significance of the assay's methodology. Both developed formulas exhibit proper rheology, good printability, and meet content and mass uniformity standards. However, the high gastro-resistance and suitable release profile of 3D printed chewable semi-solid doses with enteric pellets highlight this as an effective strategy to address the challenge of paediatric medication.

Development of a Standardized Method for Measuring Bioadhesion and Mucoadhesion That Is Applicable to Various Pharmaceutical Dosage Forms.

Although some methods for measuring bioadhesion/mucoadhesion have been proposed, a standardized method is not yet available. This is expected to hinder systematic comparisons of results across studies. This study aimed to design a single/systematic in vitro method for measuring bioadhesion/mucoadhesion that is applicable to various pharmaceutical dosage forms. To this end, we measured the peak force and work of adhesion of minitablets, pellets, and a bioadhesive emulsion using a texture analyzer. Porcine tissue was used to simulate human stomach/skin conditions. The results of these formulations were then compared to those for formulations without the bioadhesive product. We conducted a case study to assess the stability of a bioadhesive emulsion. The results for the two parameters assessed were contact time = 60 s and contact force = 0.5 N at a detachment speed of 0.1 mm/s. Significant differences were observed between the bioadhesive and control formulations, thus demonstrating the adhesive capacity of the bioadhesive formulations. In this way, a systematic method for assessing the bioadhesive capacity of pharmaceutical dosage forms was developed. The method proposed here may enable comparisons of results across studies, i.e., results obtained using the same and different pharmaceutical formulations (in terms of their bioadhesion/mucoadhesion capacity). This method may also facilitate the selection of potentially suitable formulations and adhesive products (in terms of bioadhesive properties).

Hydration Patterns in Sodium Alginate Polymeric Matrix Tablets-The Result of Drug Substance Incorporation.

The purpose was to show, using destructive/nondestructive methods, that the interplay between water, tablet structure, and composition determine the unique spatiotemporal hydration pattern of polymer-based matrices. The tablets containing a 1:1 w/w mixture of sodium alginate with salicylic acid (ALG/SA) or sodium salicylate (ALG/SNA) were studied using Karl Fischer titration, differential scanning calorimetry, X-ray microtomography, and magnetic resonance imaging. As the principal results, matrix specific features were detected, e.g., "locking" of the internal part of the matrix (ALG/SA); existence of lamellar region associated with detection of free/freezing water (ALG/SA); existence of water penetrating the matrix forming specific region preceding infiltration layer (ALG/SNA); switch in the onset temperature of endothermic water peak associated with an increase in the fraction of non-freezing water weight per dry matrix weight in the infiltration layer (ALG/SNA). The existence of complicated spatiotemporal hydration patterns influenced by matrix composition and molecular properties of constituents has been demonstrated.

Excipients in the Paediatric Population: A Review.

This theoretical study seeks to critically review the use of excipients in the paediatric population. This study is based on the rules and recommendations of European and American drug regulatory agencies. On the one hand, this review describes the most frequent excipients used in paediatric medicine formulations, identifying the compounds that scientific literature has marked as potentially harmful regarding the side effects generated after exposure. On the other hand, this review also highlights the importance of carrying out safety -checks on the excipients, which, in most cases, are linked to toxicity studies. An excipient in the compilation of paediatric population databases is expected to target safety and toxicity, as in the STEP database. Finally, a promising pharmaceutical form for child population, ODT (Orally Disintegrating Tablets), will be studied.

Spatiotemporal Analysis of Hydration Mechanism in Sodium Alginate Matrix Tablets.

Methods of spatiotemporal characterization of nonequilibrated polymer based matrices are still immature and imperfect. The purpose of the study was to develop the methodology for the spatiotemporal characterization of water transport and properties in alginate tablets under hydration. The regions of low water content were spatially and temporally sampled using Karl Fisher and Differential Scanning Callorimetry (spatial distribution of freezing/nonfreezing water) with spatial resolution of 1 mm. In the regions of high water content, where sampling was infeasible due to gel/sol consistency, magnetic resonance imaging (MRI) enabled characterization with an order of magnitude higher spatial resolution. The minimally hydrated layer (MHL), infiltration layer (IL) and fully hydrated layer (FHL) were identified in the unilaterally hydrated matrices. The MHL gained water from the first hour of incubation (5-10% w/w) and at 4 h total water content was 29-39% with nonfreezing pool of 28-29%. The water content in the IL was 45-47% and at 4 h it reached ~50% with the nonfreezing pool of 28% and T2 relaxation time < 10 ms. The FHL consisted of gel and sol layer with water content of 85-86% with a nonfreezing pool of 11% at 4 h and T2 in the range 20-200 ms. Hybrid destructive/nondestructive analysis of alginate matrices under hydration was proposed. It allowed assessing the temporal changes of water distribution, its mobility and interaction with matrices in identified layers.

Coenzyme Q10 supplementation: Efficacy, safety, and formulation challenges.

World population growth and aging are posing unprecedented challenges in sustaining the health of 9.1 billion people that will be occupying the planet by 2050. Although noncommunicable diseases such as cardiovascular and neurodegenerative diseases, cancer, and diabetes are among the top 10 global causes of death, they can be prevented by risk factor reduction, early detection, and adequate treatment. Since a healthy diet along with dietary supplementation could play an important role to reduce morbidity and cut off its associated health care costs, research in the food and nutrition area is required to find solutions to global challenges affecting health. As a result of the healthy living trend, dietary supplements category is growing fast, leading to an urgent need for dietitians, physicians, and policy makers to broaden the scientific evidence on the efficacy and safety of a wide range of active ingredients. Coenzyme Q10 (CoQ10), as the third most consumed dietary supplement, and as a potential candidate for the treatment of various noncommunicable diseases that are among the global top 10 causes of death, has gained interest over years. Scientific evidence regarding mainly CoQ10 efficacy and safety, as well as formulation challenges, is addressed in this review.

Robustness Optimization of an Existing Tablet Coating Process Applying Retrospective Knowledge (rQbD) and Validation.

The objective of these studies is to verify and validate the improvement in the inter-tablet coating uniformity for an industrially commercialized coated tablet, without involving changes in the approved registration dossier. Using the CPP (critical process parameters) determined from previous retrospective statistical analysis, the recommended working ranges are identified. Retrospective analysis showed that the design of experiments (DoE) provided an improved process variable configuration. Therefore, it is decided to study two critical parameters: Product temperature and drum speed, with an additional 22 experimental design. The quality results of the samples analyzed show that the aesthetic defects of the batches made with the new working ranges have been reduced. These results have also been corroborated with the 42 industrial batches manufactured with the new ranges. With the optimized parameters, tablets have been coated and the suitability of the model determined. The results demonstrated the overall reliability and effectiveness of the proposed Quality by Design approach and provides a useful tool to help optimize the industrial coating process. This study confirms that it is possible to optimize and validate the manufacturing process of an existing commercial product by means of a DoE with retrospective data. Therefore, no variation in the dossier is required.

Formulation of Sustained Release Hydrophilic Matrix Tablets of Tolcapone with the Application of Sedem Diagram: Influence of Tolcapone's Particle Size on Sustained Release.

Hydrophilic matrix tablets are a type of sustained release dosage form characterized by distributing a drug in a matrix that is usually polymeric. Tolcapone is a drug that inhibits the enzyme catechol-O-methyl transferase. In recent years, it has been shown that tolcapone is a potent inhibitor of the amyloid aggregation process of the transthyretin protein, and acts by stabilizing the structure of the protein, reducing the progression of familial amyloid polyneuropathy. The main objective of this study was to obtain a sustained release tablet of tolcapone for oral administration with a preferred dosage regimen of 1 administration every 12 or 24 h and manufactured, preferably, by direct compression. The SeDeM Diagram method has been used for the formulation development of hydrophilic matrix tablets. Given the characteristics of tolcapone, the excipient selected for the formation of the polymeric matrix was a high viscosity hydroxypropylmethylcellulose (Methocel® K100M CR). A decrease in the particle size of tolcapone resulted in a slower dissolution release of the formulation when the concentration of the polymer Methocel® K100M CR was below 29%. These surprising and novel results have given rise to patent number WO/2018/019997.

Therapeutic potential of nicotinamide adenine dinucleotide (NAD).

Nicotinamide adenine nucleotide (NAD) is a small ubiquitous hydrophilic cofactor that participates in several aspects of cellular metabolism. As a coenzyme it has an essential role in the regulation of energetic metabolism, but it is also a cosubstrate for enzymes that regulate fundamental biological processes such as transcriptional regulation, signaling and DNA repairing among others. The fluctuation and oxidative state of NAD levels regulate the activity of these enzymes, which is translated into marked effects on cellular function. While alterations in NAD homeostasis are a common feature of different conditions and age-associated diseases, in general, increased NAD levels have been associated with beneficial health effects. Due to its therapeutic potential, the interest in this molecule has been renewed, and the regulation of NAD metabolism has become an attractive target for drug discovery. In fact, different approaches to replenish or increase NAD levels have been tested, including enhancement of biosynthesis and inhibition of NAD breakdown. Despite further research is needed, this review provides an overview and update on NAD metabolism, including the therapeutic potential of its regulation, as well as pharmacokinetics, safety, precautions and formulation challenges of NAD supplementation.

Trends in the food and sports nutrition industry: A review.

This revision intends to provide an overview on the major and emerging trends in food and nutrition. Food scientists and dietitians should keep an eye on the trends shaping the food industry in order to understand consumer changes in preferences, expectations and dietary patterns; and to identify those areas that should be added to the research agenda. In addition, to comprehend the major drivers of change in the food industry, global consumer trends are also reviewed in this article. Global concerns are shaping consumer attitudes, and with an easier access to information and an unprecedented consumer power through social media, the food industry should quickly adapt to meet consumer needs. In order to meet these objectives, this review is organized in three different but interrelated sections: global consumer trends, food and nutrition trends, and trends in sports foods and nutrition. This last one is also included due to its influence over food trends, and its significant relevance as a category and food trend.

Development and Validation of a New High-Performance Liquid Chromatography Method for the Simultaneous Quantification of Coenzyme Q10, Phosphatidylserine, and Vitamin C from a Cutting-Edge Liposomal Vehiculization.

A high-performance liquid chromatography (HPLC) method was developed to simultaneously quantify three widely used active substances such as coenzyme Q10, phosphatidylserine, and vitamin C. This new method optimizes current timing and costs in the analyses of these three active substances. Additionally, since the analyzed compounds were encapsulated on a cutting-edge liposomal formulation, further processing was necessary to be developed prior to HPLC analyses. The technique was studied and adequately validated in accordance with the guidelines of the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) regarding selectivity, linearity, accuracy, precision, and robustness. After data treatment of results, linear regressions for all active substances showed an optimal linearity with a correlation coefficient of >0.999 in the concentration range between 70 to 130% of the liposomal formulation and less than a 3% relative standard deviation (RSD) in accuracy and precision.

Formulation of Direct Compression Zidovudine Tablets to Correlate the SeDeM Diagram Expert System and the Rotary Press Simulator Styl'ONE Results.

The SeDeM diagram expert system has been applied to study Zidovudine and some excipients. From the obtained diagrams, a pharmaceutical formula has been designed. SeDeM diagram ascertains the critical parameters that are suitable for a direct compression. The formula is compressed using a rotary tablet press simulator which emulates rotary tablet press' compression profiles. From these compressions, we study the formula behavior under different industrial production conditions but saving a huge amount of material. The study is done at different compression forces and compression speeds and taking into account the influence of the pre-compression force. The differences observed between the compression profiles are hereby described. The results indicate that the formulation is able to be compressed adequately with the emulated compression profiles and no differences are observed between the final products. Therefore, we can assure that the SeDeM diagram expert system is accurate and robust. Moreover, its results are comparable with the compression results in a rotary tablet press, which has never been described in the pharmaceutical literature before. From the obtained results, it is possible to select the best rotary press to scale-up this formulation.

Improved synthesis and characterization of cholesteryl oleate-loaded cationic solid lipid nanoparticles with high transfection efficiency for gene therapy applications.

The development of new nanoparticle formulations that are capable of high transfection efficiency without toxicity is essential to provide new tools for gene therapy. However, the issues of complex, poorly reproducible manufacturing methods, and low efficiencies during in vivo testing have prevented translation to the clinic. We have previously reported the use of cholesteryl oleate as a novel excipient for solid lipid nanoparticles (SLNs) for the development of highly efficient and nontoxic nucleic acid delivery carriers. Here, we performed an extensive characterization of this novel formulation to make the scale up under Good Manufacturing Practice (GMP) possible. We also describe the complete physicochemical and biological characterization of cholesteryl oleate-loaded SLNs to ensure the reproducibility of this formula and the preservation of its characteristics before and after the lyophilization process. We defined the best manufacturing method and studied the influence of some parameters on the obtained nanoparticles using the Quality by Design (ICH Q8) guideline to obtain cholesteryl oleate-loaded SLNs that remain stable during storage and guarantee in vitro nucleic acid delivery efficacy. Our results indicate that this improved formulation is suitable for gene therapy with the possibility of scale-up the manufacturing of nanoparticles under GMP conditions.

Optimization of the Cohesion Index in the SeDeM Diagram Expert System and application of SeDeM Diagram: An improved methodology to determine the Cohesion Index.

In this study, we suggest optimizing the methodology to determine the Cohesion Index (Icd) in order to avoid mistaken characterizations due to powder bulk density. For this purpose, five different excipients, with different bulk densities and of different chemical nature, were compressed at different heights. Their compression and their tablet characterization enable establishing a powder weight for compression in accordance with its bulk density. Therefore, the resulting tablet will have a height within a defined range of heights where it has no critical effects on its hardness. Then, the impact of this optimization is shown in a formula development, one of the main SeDeM's applications. A mathematical equation was used to calculate the theoretical amount of excipient to formulate the API according to both methodologies. The compression results demonstrate that the characterization with the NM-Icd is more accurate than the previous one while preserving its simplicity.