Contribution of Reliable Chromatographic Data in QSAR for Modelling Bisphenol Transport across the Human Placenta Barrier.

Regulatory measures and public concerns regarding bisphenol A (BPA) have led to its replacement by structural analogues, such as BPAF, BPAP, BPB, BPF, BPP, BPS, and BPZ. However, these alternatives are under surveillance for potential endocrine disruption, particularly during the critical period of fetal development. Despite their structural analogies, these BPs differ greatly in their placental transport efficiency. For predicting the fetal exposure of this important class of emerging contaminants, quantitative structure-activity relationship (QSAR) studies were developed to model and predict the placental clearance indices (CI). The most usual input parameters were molecular descriptors obtained by modelling, but for bisphenols (BPs) with structural similarities or heteroatoms such as sulfur, these descriptors do not contrast greatly. This study evaluated and compared the capacity of QSAR models based either on molecular or chromatographic descriptors or a combination of both to predict the placental passage of BPs. These chromatographic descriptors include both the retention mechanism and the peak shape on columns that reflect specific molecular interactions between solute and stationary and mobile phases and are characteristic of the molecular structure of BPs. The chromatographic peak shape such as the asymmetry and tailing factors had more influence on predicting the placental passage than the usual retention parameters. Furthermore, the QSAR model, having the best prediction capacity, was obtained with the chromatographic descriptors alone and met the criteria of internal and cross validation. These QSAR models are crucial for predicting the fetal exposure of this important class of emerging contaminants.

Evaluation of 4 quantification methods for monitoring 16 antibiotics and 1 beta-lactamase inhibitor in human serum by high-performance liquid chromatography with tandem mass spectrometry detection.

Antibiotic (ATB) prescription in an intensive care unit (ICU) requires continuous monitoring of serum dosages due to the patient's pathophysiological condition. Dosing adjustment is necessary to achieve effective targeted concentrations. Since ICUs routinely use a large number of ATBs, global monitoring needs to be developed. In the present study, we developed a global analytical method for extracting, separating and quantifying the most widely used ATBs in ICUs: amoxicillin, piperacillin, cefazolin, cefepime, cefotaxime, ceftazidime, ceftolozane, ceftriaxone, ertapenem, meropenem, ciprofloxacin, moxifloxacin, levofloxacin, daptomycin, dalbavancin, linezolid and a beta-lactamase inhibitor: tazobactam. To guarantee the robustness of the quantification, we differentiated the 16 ATBs and the beta lactamase inhibitor into 4 pools (ATB1 to ATB4), taking into account prescription frequency in the ICU, the physicochemical properties and the calibration ranges of the ATBs selected. The whole ATB was then separated with two LC columns in reversed phase: Kinetex Polar-C18 100 Å and Polar-RP-80 synergy, in less than 6.5 min. Detection was carried out by electrospray in positive ion mode, by tandem mass spectrometry (LC-MS/MS. The four quantification methods were validated according to the European guidelines on bioanalytical method validation (EMEA guide), after determining the extraction yields, matrix effects, recovery, precision, accuracy, within-run precision and between-run precision. For all analyses, bias is < 15% and is comparable to the literature and LOQs vary from 0.05 mg.L-1 for ciprofloxacin to 1.00 mg.L-1 for ceftriaxone and dalbavancin. The stability time of cefepime and piperacillin is 3 hrs and for the other ATBs 6 hrs in serum at room temperature. For long-term stability, freezing at - 80 °C guarantees 3 months of stability for ceftriaxone and dalbavancin and more than 6 months for the other ATBs.

Study of rapeseed oil gelation induced by commercial monoglycerides using a chemometric approach.

Commercial oleogelators rich in monoglycerides (MGs) are complex mixtures of acylglycerides with variable gelling properties, depending on the oil used and their concentration. In this study we developed a chemometric approach to identify the key parameters involved in gelling process. Analytical parameters have been defined, using GC and NMR analysis to identify fatty acids and acylglycerides composing the mixtures. Specific acylglyceride families and compound ratios were calculated to streamline the analytical results. To determine the key analytical parameters, artificial neural networks were used in a QSPR study related to the gelling properties measured by rheology through oscillatory experiments. At low oleogelator concentrations, the MGs especially rich in C16:0 and the ratio of specific isomers both have a positive influence on G'. For high oleogelator concentrations, C18:0-rich acylglycerides and unsaturated/saturated fatty acid ratios have a positive influence on G'. Conversely, at low concentrations, C18:0-rich acylglycerides show a lesser effect on G'.

Current trends and advances in analytical techniques for the characterization and quantification of biologically recalcitrant organic species in sludge and wastewater: A review.

The study of organic matter in wastewater is a major regulatory and environmental issue and requires new developments to identify non-biodegradable refractory compounds, produced mainly by thermal treatments. Recent advances linking physicochemical properties to spectroscopic analyzes (UV, Fluorescence, IR) have shown that the refractory property is favored by several physicochemical parameters: weight, hydrophobicity, aromaticity and chemical functions. Currently, the most effective developments for the quantification of refractory compounds are obtained with hyphenated methods, based on steric separation of the macromolecular species by steric exclusion chromatography (SEC)/PDA/Fluorescence systems. Hyphenated techniques using High Resolution Mass Spectrometry (HRMS), ultra-high-resolution mass spectrometry with Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and NMR have been developed to analyze macromolecules in wastewater with minor sample preparation procedures. A particular class has been identified, the melanoidins, generated by Maillard reactions between sugars, amino acids, peptides and proteins present in wastewater and sludge, but low molecular weight compounds formed as intermediates, such as ketones, aldehydes, pyrazines, pyridines or furans, are also recalcitrant and are complex to identify in the complex matrices. The lack of available standards for the study of these compounds requires the use of specific techniques and data processing. Advances in chemometrics are obtained in the development of molecular or physicochemical indices resulting from the data generated by the analytical detectors, such as aromaticity calculated by SUVA254 and determined by UV, fluorescence, molar mass, H/C ratio or structural studies (measuring the amount of unsaturated carbon) given by hyphenated techniques with SEC. It is clear that nitrogen compounds are widely involved in refractoriness. New trends in nitrogen containing compounds characterization follow two axes: through SEC/PDA/Fluorescence and HRMS/NMR techniques with or without separation. Other techniques widely used in food or marine science are also being imported to this study, as it can be seen in the use of "omics" methods, high-performance thin layer chromatography (HPTLC) and chromatography at the critical condition, rounding out the important developments around SEC. While improving the performance of stationary phases is one of the challenges, it results in a fundamental understanding of the retention mechanisms that today provide us with more information on the structures identified. The main objective of this review is to present the spectroscopic and physicochemical techniques used to qualify and characterize refractoriness with a specific focus on chemometric approaches.

Analysis of complex mixtures of polyglycerol fatty esters using liquid chromatography and high-resolution mass spectrometry: Retention, structural and relative composition study.

Polyglycerol esters (PGEs), produced by esterification of fatty acids on polyglycerols, were analysed by High Resolution Mass Spectrometry (HRMS), HPLC-MS and U-HPLC-MS. A structural study of PGEs in 4 samples synthesised by the Gattefossé company was carried out using an elemental analysis of HRMS spectra and modelling of all probable isomers and cyclic structures. The results were used to construct a structural database of all species present in the 4 samples. After an assessment of the selectivity of 5 reversed phase columns: Aeris Widepore XB-C8, 3.6 µm, 2.1 × 150 mm (Phenomenex), Acquity CSH C18 1.7 µm 2.1 × 50 mm, Acquity CSH Phenyl-Hexyl 1.7 µm 2.1 × 50 mm, Acquity CSH Fluoro-Phenyl 1.7 µm 2.1 × 50 mm (Waters Co.) and Kinetex F5 1.7 µm 2.1 × 100 mm (Phenomenex), HPLC-MS and U-HPLC-MS analyses were performed on an Aeris Widepore XB-C8 (Phenomenex) column (HPLC) and Acquity CSH Fluoro-Phenyl (Waters) column (U-HPLC) with aqueous formic acid /acetonitrile in gradient mode. The separation was optimised with 10 min (HPLC) and 5 min (U-HPLC) of gradient. The detection, performed on a QDA detector (Waters), produced extracted ion chromatograms (XICs) based on all adducts identified in the HRMS analysis. HPLC and U-HPLC analyses showed the different mono- and di-ester species and provided relative quantification of all identified constituents. The combined analyses of the HRMS, HPLC-MS and U-HPLC-MS results were used to compare the different PGE batches and quantify the molecular constituents according to their relative abundance, for these complex mixtures. With HPLC and U-HPLC analyses, using 2 different gradient times and 2 different selectivity columns, and comparing the retention factors and log P of the different species, it was possible to link structural identification and relative quantification of all PGEs identified in the samples.

Analysis of the retention of tetracyclines on reversed-phase columns: Chemometrics, design of experiments and quantitative structure-property relationship (QSPR) study for interpretation and optimization.

In this study, design of experiments was applied for the analysis of 6 reversed phase U-HPLC columns used for the separation of four tetracyclines (TCs): tetracycline, doxycycline, chlortetracycline and oxytetracycline in different elution conditions. In a first part, a fractional factorial design (24-1) was used to study the influence of four chromatographic parameters: column temperature, pH, flow rate and composition of the mobile phase (i.e. nature of the solvent used as the organic modifier), on the quality of the separation, which was evaluated in terms of peak width and resolution between two pairs of TCs. This experimental design revealed that the nature of the solvent: acetonitrile (ACN) or methanol (MeOH), and the mobile phase flow rate were the two main factors actually having the most influence on the quality of the separation. Moreover, these two factors presented an antagonistic influence according to the response considered: peak width or peak resolution. In order to understand this behavior, a Doehlert design was performed in the second part. It consisted in modeling the evolution of responses as a function of the two main factors: nature of the composition of the mobile phase (mix of ACN and MeOH, from 100% ACN to 100% MeOH) and mobile phase flow rate (from 0.3 to 0.8 mL min-1). For all the reversed phase columns studied, an inversion of the elution order of TCs and an increase of the retention factors was observed according to the composition of the organic mixture at the end of the gradient. To understand the modification of the interactions implied in the various retention modes related to the selectivity of the organic solvents used, a quantitative structure-property relationship (QSPR) study was achieved. In this final study, the molecular descriptors of each TCs were connected to its retention factor.

Development of an extraction method based on new porous organogel materials coupled with liquid chromatography-mass spectrometry for the rapid quantification of bisphenol A in urine.

A new method based on the use of porous organogel materials in combination with liquid chromatography-tandem mass spectrometry (LC-MS-MS) was assessed for the quantification of trace contaminants in complex matrices. As a demonstration of the use of these new materials, the contaminant chosen as a model was bisphenol A (BPA) and its extraction was investigated in urine. Organogel materials consist of an organic solvent immobilized by an organogelator. The composition of the organogel materials was optimized in terms of extraction efficiency and compatibility with LC-MS-MS. Porosity was introduced into the organogel by means of the particulate leaching method using sugar crystals. This new absorbing material is simple to use; the extraction method is reduced to a few steps. The originality of the method lies in the complete dissolution of the material for analysis by LC-MS-MS. The matrix effect of the organogel components was studied and was found to be minimal in atmospheric-pressure chemical ionization (APCI) compared to electrospray ionization (ESI) in negative mode. The influence of matrix components on the extraction was investigated by working with different media (acidified water, synthetic urine, horse urine and human urine). The partition coefficient was not affected within the margin of error (±0.1). After optimization, bisphenol A recoveries from urine samples reached 80%. The actual concentration factor was 10. The relative standard deviation (RSD, n=6) for the extraction and determination of BPA in horse urine spiked at 10ngmL(-1) was 9%. Tests with spiked human urine showed that the extraction performances were the same as with the solutions tested previously. The use of porous organogel allowed a fast, simple, sensitive, robust, green method to be developed for the determination of trace contaminants in complex matrices.

Bioactive formulations with sugar-derived surfactants: a new approach for photoprotection and controlled release of promethazine.

Skin deep: A bioactive formulation for dermal delivery of antihistamines is obtained by using the original properties of catanionic associations towards self-assembly in water. The drug, which participates in its own transport, is preserved from photodegradation when solubilised in the bioactive formulation. The drug release through the skin is also delayed.

Spontaneous formation of vesicles in a catanionic association involving a head and tail functionalized amino-calix[6]arene.

An amino-calix[6]arene was combined with sugar-based surfactants, using an acid-base reaction, to obtain an original catanionic association. Physicochemical studies showed the spontaneous formation of stable vesicles in aqueous solution.

Optimized conditions for 2-aminobenzamide labeling and high-performance liquid chromatography analysis of N-acylated monosaccharides.

The monosaccharides GlcNAc (N-acetylglucosamine) and the home-made GlcNC(16) (N-palmitoyl-D-glucosamine) were labeled with 2-AB (2-aminobenzamide) by reductive amination of the sugar. The aldehyde group of the monosaccharide reacts with the amino group of 2-AB, forming a Schiff base. In the second step, the Schiff base is reduced with sodium cyanoborohydride to yield a stable secondary amine. We describe here a simple and fast procedure. Previous studies reported the same labeling at high concentration (10(-1) M) during 30 h with further purification steps. In the present paper all operations were carried out in an Eppendorf tube and the reaction medium was directly analyzed without purification. Using the described protocol, the whole procedure can be accomplished in less than 6 h at 65 degrees C at very low concentration (10(-4) M). For both GlcNC(16) and GlcNAc, the 2-AB labeling conditions were optimized and, in addition, new conditions of high-performance liquid chromatography analysis were developed. These N-alkylated sugars were analyzed on reversed-phase HPLC with fluorimetric detection at excitation and emission wavelengths of 340 and 400 nm, respectively. The separation was achieved on a C(18) column with a gradient mobile phase composed of water (0.1% formic acid)-methanol (volume varying) in less than 19 min with 12.5 and 18.3 min retention times for GlcNAc and GlcNC16, respectively. Positive-ion electrospray ionization mass spectrometry (ESI-MS) analysis enabled their structural determination.

Evaluation of new thiadiazoles and benzothiazoles as potential radioprotectors: free radical scavenging activity in vitro and theoretical studies (QSAR, DFT).

Thiol and aminothiol compounds are among the most efficient chemical radioprotectors. To increase their efficiency, we synthesized two new classes of thiol and aminothiol compounds derived from benzothiazole (T1, T2, AM1, AM2) and thiadiazole (T3, T4, AM3) structures. We examined them for their ability to scavenge free radicals (DPPH*, ABTS(*+), *OH). Thiol derivatives with a thiadiazole structure are the most active compounds scavenging DPPH* and ABTS(*+) free radicals, with an IC(50) of 0.053+/-0.006 and 0.023+/-0.002 mM, respectively, for the derivative T3. Moreover, compounds T1, T2, and T3 at 60 microM gave 83% protection against 2-deoxyribose degradation by *OH. The ability of these compounds to protect DNA against *OH produced by a Fenton reaction and gamma-irradiation (15 Gy)-induced strand breaks was also evaluated on pBR322 plasmid DNA. In both tests thiol derivatives were the most efficient compounds. Derivatives T2 and T3 totally inhibit DNA strand breaks at the concentration of 50 microM. The protection afforded by these derivatives was comparatively higher than that of the radioprotectors WR-2721 and WR-1065. Our data indicate that these two compounds are free radical scavengers and potential antioxidant agents. Finally, DFT and QSAR studies were performed to support the experimental observations.

The use of naphthalene-2,3-dicarboxaldehyde for the analysis of primary amines using high-performance liquid chromatography and capillary electrophoresis.

This paper reviews analytical methods, instrumental developments and applications for derivatization of primary amines with naphthalene-2,3-dicarboxaldehyde using fluorescence and chemiluminescence detection with capillary electrophoresis (CE) and high performance liquid chromatography (HPLC). The use of lasers as well as lamps as the excitation source for fluorescence detection is discussed. The detection limit observed with naphthalene-2,3-dicarboxaldehyde derivatization is often lower and better than those obtained with other analytical separations and other fluorescent dyes. In addition, this paper describes the crucial points that influence the stability of NDA primary amine derivatives, and summarize the separation, derivatization and migration conditions of the different techniques, with their advantages and drawbacks.

Reaction of naphthalene-2,3-dicarboxaldehyde with enkephalins for LC-fluorescence and LC-MS analysis: conformational studies by molecular modeling and H/D exchange mass spectrometry.

A new labeling method compatible with both laser-induced fluorescence (LIF) and MS detection for enkephalins, which uses naphthalene-2,3-dicarboxaldehyde (NDA) and a new nucleophilic agent (N,N-dimethylaminoethanethiol) is described. When the derivative is separated via reverse phase HPLC and detected via MS, two different peaks with similar exact mass but different fluorescence and fragmentation properties are obtained. To interpret these results, molecular modeling and H/D exchange mass spectrometry studies were investigated to test the hypothesis that the peak obtained by LC/LIF/MS analysis depends on the site of protonation of the labeled enkephalins. The peptides labeled with NDA and N,N-dimethylaminoethanethiol were separated on a reverse phase C18 column with a gradient of aqueous 0.1% formic acid and acetonitrile. In mass spectrometry, two peaks are observed with the same exact mass for each molecule while only one peak is detected using fluorescence. Tandem mass spectrometry experiments of ion m/z 809.5 were performed on each chromatographic peak; the first peak (which is not observed by LIF detection) gives a fragment corresponding to the loss of the aminothiol side chain while no fragmentation is observed on the second peak, which was detected by fluorescence. The hypothesis is that each peak represents the labeled enkephalin with different sites of protonation. According to this hypothesis, three fundamental conformations that were closed to the unlabeled leucine-enkephalin were obtained by molecular modeling: a beta-turn like conformation with two hydrogen bonds, a 3(10)-helix with an H bond, and finally, the extended form without any intramolecular interactions. H/D exchange mass spectrometry experiments with D(2)O and d(2-)formic acid as eluent was used to determine which conformation is involved in each peak.

Design of original bioactive formulations based on sugar-surfactant/non-steroidal anti-inflammatory catanionic self-assemblies: a new way of dermal drug delivery.

A new kind of catanionic assembly was developed that associates a sugar-based surfactant with a non-steroidal anti-inflammatory drug (NSAID). Three different assemblies using indomethacin, ibuprofen and ketoprofen as NSAIDs were easily obtained in water by an acid-base reaction. These assemblies formed new amphiphilic entities because of electrostatic and hydrophobic effects in water and led to the spontaneous formation of vesicles. These catanionic vesicles were then tested as potential NSAID delivery systems for dermatological application. The anti-inflammatory activity was evaluated in vivo, and this study clearly showed an improved therapeutic effect for NSAIDs that were formulated as catanionic vesicles. These vesicles ensured a slower diffusion of the NSAID through the skin. This release probably increased the time of retention of the NSAID in the targeted strata of the skin. Thus, the present study suggests that this catanionic bioactive formulation could be a promising dermal delivery system for NSAIDs in the course of skin inflammation treatment.

HPLC-fluorescence detection and MEKC-LIF detection for the study of amino acids and catecholamines labelled with naphthalene-2,3-dicarboxyaldehyde.

Naphthalene-2,3-dicarboxyaldehyde (NDA) is commonly used for detection of primary amines in conjunction with their separation with HPLC and CE. The fluorescence of the derivatives can be measured by a conventional fluorometer or via LIF. NDA is a reactive dye, which can replace o-phthaldehyde (OPA) and provides for derivatives which are considerably more stable than OPA derivatives. In addition, NDA can be used to derivatize primary amines at concentrations as low as 100 pM. In this work, HPLC/fluorescence and MEKC/LIF experiments were performed to separate/detect six neuroactive compounds, the amino acids, Gly, Glu, Asp, gamma-aminobutyric acid (GABA) and the catecholamines, dopamine and noradrenaline. The two methods were compared in terms of performance of separation. The amino acids can be separated in HPLC in less than 30 min and an identical separation is obtained in CE using MEKC and lithium salts with greater resolution (the number of theoretical plates was approximately 5000 for HPLC and 200 000 for MEKC). The lowest detected concentration was in the range of 0.1 nM for CE/LIF. The presence of a high salt concentration does not affect the separation of the samples. Examples of the analysis of microdialysate samples as well as amino acids in Ringer's solution are presented.

Photochemical behavior of a new long-chain UV absorber derived from 4-tert-butyl-4'-methoxydibenzoylmethane.

A new UV filter, the 1-(4-tert-butylphenyl)-2-decanyl-3-(4'-methoxyphenyl)-propane-1,3-dione, called C10-DBM, was prepared by grafting a 10-carbon aliphatic chain to the alpha-carbonyl position of 4-tert-butyl-4'-methoxydibenzoylmethane (BM-DBM), a well-known and often used UV filter. The UV-A absorption efficiency of organic solutions containing the new filter was tested and compared with identical solutions containing BM-DBM with or without irradiation (xenon lamp). The originality of this new filter is that its UV-A absorbance appeared during irradiation of the molecule. Although the molar absorption coefficient of C10-DBM in the UV-A domain was lower than that of BM-DBM, the solutions absorption exhibited a much more photostable behavior under irradiation. In this study, we first demonstrated that C10-DBM was a precursor of BM-DBM (enol isomer) by means of high-performance liquid chromatography followed by mass spectrometry. Indeed, we showed that the UV-A absorption of C10-DBM solutions appearing during the irradiation of the molecule was due to a Norrish-II reaction (beta-cleavage), which induced the release of the BM-DBM enol form and 1-decene. Then, we established a kinetic model for the photochemistry of C10-DBM and fitted the variation of UV absorption spectra to confirm the proposed mechanism.