RESUMO
Osteocytes are the major actors in bone mechanobiology. Within bone matrix, they are trapped close together in a submicrometric interconnected network: the lacunocanalicular network (LCN). The interstitial fluid circulating within the LCN transmits the mechanical information to the osteocytes that convert it into a biochemical signal. Understanding the interstitial fluid dynamics is necessary to better understand the bone mechanobiology. Due to the submicrometric dimensions of the LCN, making it difficult to experimentally investigate fluid dynamics, numerical models appear as a relevant tool for such investigation. To develop such models, there is a need for geometrical and morphological data on the human LCN. This study aims at providing morphological data on the human LCN from measurement of 27 human femoral diaphysis bone samples using synchrotron radiation nano-computed tomography with an isotropic voxel size of 100 nm. Except from the canalicular diameter, the canalicular morphological parameters presented a high variability within one sample. Some differences in terms of both lacunar and canalicular morphology were observed between the male and female populations. But it has to be highlighted that all the canaliculi cannot be detected with a voxel size of 100 nm. Hence, in the current study, only a specific population of large canaliculi that could be characterize. Still, to the authors knowledge, this is the first time such a data set was introduced to the community. Further processing will be achieved in order to provide new insight on the LCN permeability.
RESUMO
While most of current models investigating bone remodelling are based on matrix deformation, intramedullary pressure also plays a role. Bone remodelling is orchestrated by the Lacuno-Canalicular Network (LCN) fluid-flow. The aim of this review was hence to assess the influence of intramedullary pressure on the fluid circulation within the LCN. Three databases (Science Direct, Web of Science, and PubMed) were used. The first phase of the search returned 731 articles, of which 9 respected the inclusion/exclusion criteria and were included. These studies confirm the association between intramedullary pressure and fluid dynamics in the LCN. Among the included studies, 7 experimental studies using animal models and 2 numerical models were found. The studies were then ranked according to the nature of the applied loading, either axial compression or direct cyclic intramedullary pressure. The current review revealed that there is an influence of intramedullary pressure on LCN fluid dynamics and that this influence depends on the magnitude and the frequency of the applied pressure. Two studies confirmed that the influence was effective even without bone matrix deformation. While intramedullary pressure is closely associated with LCN fluid, there is a severe lack of studies on this topic. STATEMENT OF SIGNIFICANCE: Since the 1990's, numerical models developed to investigate fluid flow in bone submicrometric porous network are based on the flow induced by matrix deformation. Bone fluid flow is known to be involved in cells stimulation and hence directly influences bone remodeling. Different studies have shown that intramedullary pressure is also associated with bone mechanosensitive adaptation. This pressure is developed in bone due to blood circulation and is increased during loading or muscle stimulation. The current article reviews the studies investigating the influence of this pressure on bone porous fluid flow. They show that fluid flow is involved by this pressure even without bone matrix deformation. The current review article highlights the severe lack of studies about this mechanism.
Assuntos
Pressão , Animais , Humanos , Remodelação Óssea/fisiologia , HidrodinâmicaRESUMO
In order to enhance and promote tissue repair and healing processes, current exploratory and investigative research lines in medical and dental treatments are focusing on the use of bioactive materials that are able to induce and trigger a specific targeted biological activity to stimulate the suitable response from the host tissue [...].
RESUMO
Nanohydroxyapatite (nanoHA) is the major mineral component of bone. It is highly biocompatible, osteoconductive, and forms strong bonds with native bone, making it an excellent material for bone regeneration. However, enhanced mechanical properties and biological activity for nanoHA can be achieved through enrichment with strontium ions. Here, nanoHA and nanoHA with a substitution degree of 50 and 100% of calcium with strontium ions (Sr-nanoHA_50 and Sr-nanoHA_100, respectively) were produced via wet chemical precipitation using calcium, strontium, and phosphorous salts as starting materials. The materials were evaluated for their cytotoxicity and osteogenic potential in direct contact with MC3T3-E1 pre-osteoblastic cells. All three nanoHA-based materials were cytocompatible, featured needle-shaped nanocrystals, and had enhanced osteogenic activity in vitro. The Sr-nanoHA_100 indicated a significant increase in the alkaline phosphatase activity at day 14 compared to the control. All three compositions revealed significantly higher calcium and collagen production up to 21 days in culture compared to the control. Gene expression analysis exhibited, for all three nanoHA compositions, a significant upregulation of osteonectin and osteocalcin on day 14 and of osteopontin on day 7 compared to the control. The highest osteocalcin levels were found for both Sr-substituted compounds on day 14. These results demonstrate the great osteoinductive potential of the produced compounds, which can be exploited to treat bone disease.
RESUMO
While periodontal ligament cells are sensitive to their 3D biomechanical environment, only a few 3D in vitro models have been used to investigate the periodontal cells mechanobiological behavior. The objective of the current study was to assess the capability of a 3D fibrous scaffold to transmit a mechanical loading to the periodontal ligament cells. Three-dimensional fibrous polycaprolactone (PCL) scaffolds were synthetized through electrospinning. Scaffolds seeded with human periodontal cells (103 mL-1) were subjected to static (n = 9) or to a sinusoidal axial compressive loading in an in-house bioreactor (n = 9). At the end of the culture, the dynamic loading seemed to have an influence on the cells' morphology, with a lower number of visible cells on the scaffolds surface and a lower expression of actin filament. Furthermore, the dynamic loading presented a tendency to decrease the Alkaline Phosphatase activity and the production of Interleukin-6 while these two biomolecular markers were increased after 21 days of static culture. Together, these results showed that load transmission is occurring in the 3D electrospun PCL fibrous scaffolds, suggesting that it can be used to better understand the periodontal ligament cells mechanobiology. The current study shows a relevant way to investigate periodontal mechanobiology using 3D fibrous scaffolds.
RESUMO
While dental composite long-term aging has already been studied in the past, no data exist about the early aging while it might be detrimental regarding the composites' longevity. This study aims to better understand the effects of early water exposure on dental composites. Dental resin composites with different fillers ratio were subjected to water exposure during 24 h, 1 week, or 1 month. After photopolymerization, the samples were stored at different conditions, whether in wet or dry condition (W, D, respectively) and in wet conditions after a first 24 h storage in dry conditions (DW). Three-point bending tests were performed to measure the flexural modulus. The samples were then subjected to a sorption/desorption protocol. While the matrix alone did not undergo any mechanical degradation with exposure time, the composites matrices presented a decrease in elastic modulus. This decrease was the highest for the matrix with nonsilanized fillers. Interestingly, the DW condition was detrimental for all the samples. Regarding the sample with nonsilanized fillers in DW for 1 month presented an elastic modulus lower than the matrix alone. These results were assigned to the sorption capacity of the polymer matrix, suggesting that the diffusion mechanisms and the nature of water molecules are determinant in the composite degradation. This study showed that dental composite early degradation mechanisms after water exposure are involved in the polymer matrix postpolymerization process as soon as after 24 h. Such mechanisms are detrimental in terms of the dental composite efficiency and have to be understood.
Assuntos
Polímeros , ÁguaRESUMO
Background: The toxicological risk of Co-Cr dental alloys is actually a sensitive subject with the European regulatory changes, namely regulation (EU) 2017/745 and annex VI to the CLP regulation (EC) 1972/2008. Objectives: The objective of this review is to conduct a rigorous analysis of the cytocompatibility of cobalt-chromium (Co-Cr) dental alloys. Considering various parameters such as cytotoxicity, type IV hypersensitivity reaction, sensitization, and irritation, we investigated evidence of toxicity of Co-Cr in human dental applications. Data sources: Specific search strategies were performed in three electronic databases, namely Medline, Embase, and Web of Science, using a main restriction in the search regarding the publication date (1995-2022). Study selection: Out of a total of 836 articles, only 21 studies were selected and analyzed according to PRISMA methodology. Results: Among them, 10 in vitro studies using human samples and 11 in vivo studies on human patients were distinguished. Most of the in vitro studies confirmed that Co-Cr alloys have a good cytocompatibility compared to Ni alloys. Regarding the in vivo studies, it appeared that Co-Cr could rarely cause sensitization, irritation, and allergic reactions. Reactions were mainly observed for people allergic to Co or Cr. Nevertheless, titanium-based materials showed better results. Conclusions: This study proposes a new state of the art on Co-Cr dental alloys and will thus be very useful for carrying out additional studies. Relevance: This review will help practitioners in their daily clinical choice.
RESUMO
OBJECTIVES: The conventional radiotherapy protocol to treat head-and-neck cancer is usually followed by tooth-decay onset. Radiation impact on mineralized tooth structures is not well-understood. This systematic review aimed to collect the recorded effects of therapeutic radiation on tooth chemical, structural and mechanical properties, in relation with their means of investigation. DATA: Systematic search (January 01 2012 - September 30 2021) terms were "Radiotherapy", "Radiation effects", "Dental enamel", "Dentin", "Human" and "Radiotherapy" NOT "Laser". SOURCES: PubMed, DOSS and Embase databases were searched. STUDY SELECTION: Selected studies compared dental enamel, coronal and root dentin properties before and after in vitro or in vivo irradiation up to 80 Gy. RESULTS: The systematic search identified 353 different articles, with 28 satisfying inclusion criteria. Their reference lists provided two more. Twenty-two studies evaluated dental enamel evolution, nine assessed coronal dentin and eight concerned root dentin. Coronal and root dentin results indicate a major impact of the radiation on their organic matrix. Dental enamel's chemical properties are less modified. Enamel and root dentin's hardness are decreased by therapeutic radiation, but no consensus arises for coronal dentin. CONCLUSIONS: Our findings revealed some interesting information about enzymatic degradation mechanisms of dentin organic matrix and highlighted that dental hard-tissue characterization requires highly specific expertise in materials science. That scientific knowledge is necessary to design suitable protocols, adequately analyze the obtained data, and, thus, provide relevant conclusions. CLINICAL SIGNIFICANCE STATEMENT: Better knowledge and understanding of the mechanisms involved in the degradation of enamel and dentin would enable development of new preventive and therapeutic methods for improved medical care of patients undergoing radiotherapy.
Assuntos
Cárie Dentária , Neoplasias de Cabeça e Pescoço , Lesões por Radiação , Dente , Cárie Dentária/etiologia , Esmalte Dentário/química , Esmalte Dentário/efeitos da radiação , Dentina/química , Dentina/efeitos da radiação , Neoplasias de Cabeça e Pescoço/radioterapia , Humanos , Dente/efeitos da radiaçãoRESUMO
OBJECTIVE: To evaluate in vitro the mechanical, biological, and polymerization behavior of a flowable bulk-fill composite with fibers as a dispersed phase. METHODS: EverX Flow™ (GC Corporation) (EXF), one conventional bulk-fill composite (Filtek™ Bulk Fill Posterior Restorative, 3 M (FBF)), and one flowable bulk composite without fibers (SDR® flow+, Dentsply (SDR)) were tested. Samples were characterized in terms of flexural strength (ISO 4049), fracture toughness (ISO 20795-1), and Vickers hardness. Polymerization stress and volumetric shrinkage were evaluated. The in vitro biological assessment was achieved on cultured primary Human Gingival Fibroblast cells (HGF). The cell metabolic activity was evaluated using Alamar Blue assay at 1, 3, and 5 days of contact to the 3 tested composite extracts (ISO 10993) and cell morphology was evaluated by confocal microscopy. Data were submitted to One-Way analysis of variance (ANOVA) and independent t-test (α = 0.05). RESULTS: FBF showed statistically higher Vickers hardness and flexural modulus than EXF and SDR. However, EXF showed statistically higher KIC than FBF and SDR. EXF had the statistically highest shrinkage stress values and FBF the lowest. Archimedes volumetric shrinkage showed significantly lower values for FBF as compared to the other two composites. Slight cytotoxic effect was observed for the three composites at day one. An enhancement of metabolic activity at day 5 was observed in cells treated with EXF extracts. SIGNIFICANCE: EXF had a significantly higher fracture toughness validating its potential use as a restorative material in stress bearing areas. EXF showed higher shrinkage stress values, and less cytotoxic effect. Fiber reinforced flowable composite is mainly indicated for deep and large cavities, signifying the importance for assessing its shrinkage stress and biological behavior.
Assuntos
Resinas Compostas , Materiais Dentários , Dureza , Humanos , Teste de Materiais , Polimerização , Propriedades de SuperfícieRESUMO
PURPOSE: To investigate the relationship between the microstructure of CAD/CAM blocks and the quality of adhesion as function of the surface treatment and resin cement type. MATERIALS AND METHODS: Two nano-ceramic composite resin CAD/CAM blocks, Lava Ultimate (LU) and Cerasmart (CS), and two Leucite-reinforced glass ceramic CAD/CAM IPS blocks, Empress® CAD (EM) and InitialTM LRF (IR), received either Hydrofluoric acid (HF) or sandblasting (SB) surface treatments. The blocks were then luted using two dual-cure resin cements, LinkForce (LF) and Multilink Automix (ML) with their corresponding silanes, resulting in 16 study groups. The luted blocks were then thermal-cycling (TC) for 5000 cycles and subjected to a microtensile bond strength (µTBS) test. Scanning electron microscopy (SEM) micrographs of the treated surfaces were analyzed using ImageJ software and XRD analyses were performed for the two ceramic blocks. The data obtained were submitted to Games-Howell post-hoc nonparametric test to compare combinations of groups or treatments and a linear mixed-effects model for the factors surface treatment, block type, and resin cement, together with their first-degree interactions (α = 0.05). RESULTS: The lowest mean µTBS values were obtained with LU-HF, whereas the highest mean µTBS values were obtained with CS regardless of resin cement type and surface treatment method. IR-HF mean µTBS were significantly higher than IR-SB, EM-SB, and EM-HF. Analysis using ImageJ software demonstrated significant differences in the density and pore size after HF surface treatment. CONCLUSIONS: The specific microstructure of each block material within the same family group impacted the micromechanical retention and the bonded interface strength.
Assuntos
Colagem Dentária , Cerâmica , Resinas Compostas , Desenho Assistido por Computador , Porcelana Dentária , Teste de Materiais , Cimentos de Resina , Propriedades de Superfície , Resistência à TraçãoRESUMO
Different kinds of interactions between the restorative material and mineralized dental tissues result in secondary caries around dental composites. Of these, the mechanical interactions have to be carefully investigated. Due to the elastic mismatch between dental tissues and the composite restoration, complex stresses and strains develop at their interface. This complex mechanical environment disturbs the demineralization-remineralization equilibrium of dental hard tissues. The fluid flow both over and within enamel and dentin, associated with their complex ultrastructure and mechanical behavior, is a key factor. It is known that external mechanical loading can indirectly promote the dissolution of enamel and dentin through a pumping action of cariogenic fluids in and out of microgaps at the interface between mineralized tissues and composite. Mechanical loading can also directly influence the physicochemical behavior of dental hard tissues by inducing complex strain and stress fields on the crystal scale. It is important to consider both the direct and indirect paths by which mechanical loading can influence the apatite dissolution kinetics. Therefore, a systematic approach should be used to investigate the mechanism of secondary caries formation considering the tooth-composite interface as a unique complex in which each element has an influence on the other.
Assuntos
Resinas Compostas , Cárie Dentária , Cárie Dentária/etiologia , Suscetibilidade à Cárie Dentária , Esmalte Dentário , Materiais Dentários , Restauração Dentária Permanente , Dentina , HumanosRESUMO
Osteoporotic bone fractures represent a critical clinical issue and require personalized and specific treatments in order to stimulate compromised bone tissue regeneration. In this clinical context, the development of smart nano-biomaterials able to synergistically combine chemical and biological cues to exert specific therapeutic effects (i.e., pro-osteogenic, anti-clastogenic) can allow the design of effective medical solutions. With this aim, in this work, strontium-containing mesoporous bioactive glasses (MBGs) were bio-functionalized with ICOS-Fc, a molecule able to reversibly inhibit osteoclast activity by binding the respective ligand (ICOS-L) and to induce a decrease of bone resorption activity. N2 adsorption analysis and FT-IR spectroscopy were used to assess the successful grafting of ICOS-Fc on the surface of Sr-containing MBGs, which were also proved to retain the peculiar ability to release osteogenic strontium ions and an excellent bioactivity after functionalization. An ELISA-like assay allowed to confirm that grafted ICOS-Fc molecules were able to bind ICOS-L (the ICOS binding ligand) and to investigate the stability of the amide binding to hydrolysis in aqueous environment up to 21 days. In analogy to the free form of the molecule, the inhibitory effect of grafted ICOS-Fc on cell migratory activity was demonstrated by using ICOSL positive cell lines and the ability to inhibit osteoclast differentiation and function was confirmed by monitoring the differentiation of monocyte-derived osteoclasts (MDOCs), which revealed a strong inhibitory effect, also proven by the downregulation of osteoclast differentiation genes. The obtained results showed that the combination of ICOS-Fc with the intrinsic properties of Sr-containing MBGs represents a very promising approach to design personalized solutions for patients affected by compromised bone remodeling (i.e., osteoporosis fractures).
RESUMO
Cortical bone fracture mechanisms are well studied under quasi-static loading. The influence of strain rate on crack propagation mechanisms needs to be better understood, however. We have previously shown that several aspects of the bone micro-structure are involved in crack propagation, such as the complete porosity network, including the Haversian system and the lacunar network, as well as biochemical aspects, such as the maturity of collagen cross-links. The aim of this study is to investigate the influence of strain rate on the toughness of human cortical bone with respect to its microstructure and organic non-collagenous composition. Two strain rates will be considered: quasi-static loading (10-4 s-1), a standard condition, and a higher loading rate (10-1 s-1), representative of a fall. Cortical bone samples were extracted from eight female donors (age 50-91 years). Three-point bending tests were performed until failure. Synchrotron radiation micro-computed tomography imaging was performed to assess bone microstructure including the Haversian system and the lacunar system. Collagen enzymatic cross-link maturation was measured using a high performance liquid chromatography column. Results showed that that under quasi-static loading, the elastic contribution of the fracture process is correlated to both the collagen cross-links maturation and the microstructure, while the plastic contribution is correlated only to the porosity network. Under fall-like loading, bone organization appears to be less linked to crack propagation.
Assuntos
Osso Cortical/fisiologia , Estresse Mecânico , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Osso Cortical/citologia , Osso Cortical/diagnóstico por imagem , Osso Cortical/lesões , Feminino , Humanos , Pessoa de Meia-Idade , Microtomografia por Raio-XRESUMO
Human cortical bone has a complex hierarchical structure that is periodically remodelled throughout a lifetime. This microstructure dictates the mechanical response of the tissue under a critical load. If only some structural features, such as the different porosities observed in bone, are primarily studied, then investigations may not fully consider the osteonal systems in three-dimensions (3D). Currently, it is difficult to differentiate osteons from interstitial tissue using standard 3D characterization methods. Synchrotron radiation micro-computed tomography (SR-µCT) in the phase contrast mode is a promising method for the investigation of osteons. In the current study, SR-µCT imaging was performed on cortical bone samples harvested from eight human radii (female, 50-91 y.o.). The images were segmented to identify Haversian canals, osteocyte lacunae, micro-cracks, as well as osteons. The significant correlation between osteonal and Haversian canal volume fraction highlights the role of the canals as sites where bone remodelling is initiated. The results showed that osteocyte lacunae morphometric parameters depend on their distance to cement lines, strongly suggesting the evolution of biological activity from the beginning to the end of the remodelling process. Thus, the current study provides new data on 3D osteonal morphometric parameters and their relationships with other structural features in humans.
Assuntos
Osso Cortical/anatomia & histologia , Osso Cortical/diagnóstico por imagem , Ósteon/anatomia & histologia , Ósteon/diagnóstico por imagem , Imageamento Tridimensional , Rádio (Anatomia)/anatomia & histologia , Rádio (Anatomia)/diagnóstico por imagem , Densidade Óssea , Humanos , Tamanho do Órgão , Estresse MecânicoRESUMO
The strong dependence between cortical bone elasticity at the millimetre-scale (mesoscale) and cortical porosity has been evidenced by previous studies. However, bone is an anisotropic composite material made by mineral, proteins and water assembled in a hierarchical structure. Whether the variations of structural and compositional properties of bone affect the different elastic coefficients at the mesoscale is not clear. Aiming to understand the relationships between bone elastic properties and compositions and microstructure, we applied state-of-the-art experimental modalities to assess these aspects of bone characteristics. All elastic coefficients (stiffness tensor of the transverse isotropic bone material), structure of the vascular pore network, collagen and mineral properties were measured in 52 specimens from the femoral diaphysis of 26 elderly donors. Statistical analyses and micromechanical modeling showed that vascular pore volume fraction and the degree of mineralization of bone are the most important determinants of cortical bone anisotropic mesoscopic elasticity. Though significant correlations were observed between collagen properties and elasticity, their effects in bone mesoscopic elasticity were minor in our data. This work also provides a unique set of data exhibiting a range of variations of compositional and microstructural cortical bone properties in the elderly and gives strong experimental evidence and basis for further development of biomechanical models for human cortical bone. STATEMENT OF SIGNIFICANCE: This study reports the relationships between microstructure, composition and the mesoscale anisotropic elastic properties of human femoral cortical bone in elderly. For the first time, we provide data covering the complete anisotropic elastic tensor, the microstructure of cortical vascular porosity, mineral and collagen characteristics obtained from the same or adjacent samples in each donor. The results revealed that cortical vascular porosity and degree of mineralization of bone are the most important determinants of bone anisotropic stiffness at the mesoscale. The presented data gives strong experimental evidence and basis for further development of biomechanical models for human cortical bone.
Assuntos
Envelhecimento/metabolismo , Osso Cortical/metabolismo , Elasticidade , Fêmur/metabolismo , Idoso , Idoso de 80 Anos ou mais , Anisotropia , Feminino , Humanos , Masculino , Pessoa de Meia-IdadeRESUMO
Human cortical bone fracture toughness depends on the anatomical locations under quasi-static loading. Recent results also showed that under fall-like loading, cortical bone fracture toughness is similar at different anatomical locations in the same donor. While cortical bone toughening mechanisms are known to be dependent on the tissue architecture under quasi-static loading, the fracture mechanisms during a fall are less studied. In the current study, the structural parameters of eight paired femoral diaphyses, femoral necks and radial diaphyses were mechanically tested under quasi-static and fall-like loading conditions (female donors, 70⯱â¯14 y.o., [50-91 y.o.]). Synchrotron radiation micro-CT imaging was used to quantify the amount of micro-cracks formed during loading. The volume fraction of these micro-cracks was significantly higher within the specimens loaded under a quasi-static condition than under a loading representative of a fall. Under fall-like loading, there was no difference in crack volume fraction between the different paired anatomical locations. This result shows that the micro-cracking toughening mechanism depends both on the anatomical location and on the loading condition.
Assuntos
Osso Cortical/patologia , Diáfises/patologia , Pressão , Acidentes por Quedas , Idoso , Osso Cortical/diagnóstico por imagem , Diáfises/diagnóstico por imagem , Feminino , Fêmur/diagnóstico por imagem , Colo do Fêmur/diagnóstico por imagem , Fraturas Ósseas/diagnóstico por imagem , Humanos , Pessoa de Meia-Idade , Rádio (Anatomia)/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Microtomografia por Raio-XRESUMO
OBJECTIVES: The purpose of this work is a proof of concept to introduce a new quantitative 3D-analysis of dental erosion obtained by focused ion beam (FIB) tomography associated with silver nitrate penetration into porosities in etched enamel. METHODS: One sample selected was sound enamel after removal of the aprismatic surface. The other was studied after applying an additional attack with orthophosphoric acid. Both surfaces were infiltrated with silver nitrate via immersion. After dehydration, samples were observed in a dual column FIB/SEM station. Serial FIB sectioning was conducted with a current of 3nA at 30keV and an increment step of 20nm for the healthy enamel and of 40nm for the etched one. 3D analysis was performed with Fiji software and BoneJ plugin and several parameters were obtained to characterize the tissue: non-mineralized phase content (NMP), connected porosity fraction (CPF) and degree of anisotropy (DA) of the NMP. RESULTS: Healthy enamel showed an NMP content of 0.5vol.%, with a bimodal distribution of non-mineralized regions, inside the prisms and between the prisms. No silver penetration was noticed in the healthy enamel, demonstrating the absence of open porosity. In contrast, silver nitrate penetration after acidic exposure was observed, up to a depth of 12µm, which allowed the calculation of an interconnected porosity volume fraction (CPF) of 3.1vol.%, mostly between the prisms. Values for DA of 0.56 for sound enamel and 0.81 for acid-etched surface were determined, highlighting a higher degree of anisotropy in the latter. SIGNIFICANCE: Quantitative analysis of FIB tomography using NMP, CPF and DA should contribute to a better understanding and follow up of dental erosion, correlation between erosion and attrition or abrasion process, and the ability to develop enamel remineralization procedures.
Assuntos
Microscopia Eletrônica de Varredura/métodos , Erosão Dentária/diagnóstico por imagem , Condicionamento Ácido do Dente , Humanos , Imageamento Tridimensional , Técnicas In Vitro , Dente Serotino , Ácidos Fosfóricos/química , Porosidade , Estudo de Prova de Conceito , Nitrato de Prata/químicaRESUMO
Human bone is known to adapt to its mechanical environment in a living body. Both its architecture and microstructure may differ between weight-bearing and non-weight-bearing bones. The aim of the current study was to analyze in three dimensions, the morphology of the multi-scale porosities on human cortical bone at different locations. Eight paired femoral diaphyses, femoral necks, and radial diaphyses were imaged using Synchrotron Radiation µCT with a 0.7⯵m isotropic voxel size. The spatial resolution facilitates the investigation of the multiscale porosities of cortical bone, from the osteonal canals system down to the osteocyte lacunar system. Our results showed significant differences in the microstructural properties, regarding both osteonal canals and osteocytes lacunae, between the different anatomical locations. The radius presents significantly lower osteonal canal volume fraction and smaller osteonal canals than the femoral diaphysis or neck. Osteocytes lacunae observed in the radius are significantly different in shape than in the femur, and lacunar density is higher in the femoral neck. These results show that the radius, a non-weight-bearing bone, is significantly different in terms of its microstructure from a weight-bearing bone such as the femur. This implies that the cortical bone properties evaluated on the femoral diaphysis, the main location studied within the literature, cannot be generalized to other anatomical locations.
Assuntos
Osso Cortical/anatomia & histologia , Osso Cortical/diagnóstico por imagem , Colo do Fêmur/anatomia & histologia , Colo do Fêmur/diagnóstico por imagem , Idoso , Idoso de 80 Anos ou mais , Feminino , Ósteon/anatomia & histologia , Ósteon/diagnóstico por imagem , Humanos , Processamento de Imagem Assistida por Computador , Masculino , Pessoa de Meia-Idade , Microtomografia por Raio-XRESUMO
Human cortical bone fracture processes depend on the internal porosity network down to the lacunar length scale. Recent results show that at the collagen scale, the maturation of collagen cross-links may have a negative influence on bone mechanical behavior. While the effect of pentosidine on human cortical bone toughness has been studied, the influence of mature and immature enzymatic cross-links has only been studied in relation to strength and work of fracture. Moreover, these relationships have not been studied on different paired anatomical locations. Thus, the aim of the current study was to assess the relationships between both enzymatic and non-enzymatic collagen cross-links and human cortical bone toughness, on four human paired anatomical locations. Single Edge Notched Bending toughness tests were performed for two loading conditions: a quasi-static standard condition, and a condition representative of a fall. These tests were done with 32 paired femoral diaphyses, femoral necks and radial diaphyses (18 women, age 81⯱â¯12â¯y.o.; 14 men, age 79⯱â¯8â¯y.o.). Collagen enzymatic and non-enzymatic crosslinks were measured on the same bones. Maturation of collagen was defined as the ratio between immature and mature cross-links (CX). The results show that there was a significant correlation between collagen cross-link maturation and bone toughness when gathering femoral and radial diaphyses, but not when considering each anatomical location individually. These results show that the influence of collagen enzymatic and non-enzymatic cross-links is minor when considering human cortical bone crack propagation mechanisms.
Assuntos
Colágeno/metabolismo , Osso Cortical/fisiologia , Fraturas Ósseas/fisiopatologia , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos/fisiologia , Feminino , Humanos , Masculino , Estresse MecânicoRESUMO
Bone fracture is a major health issue worldwide and consequently there have been extensive investigations into the fracture behavior of human cortical bone. However, the fracture properties of human cortical bone under fall-like loading conditions remains poorly documented. Further, most published research has been performed on femoral diaphyseal bone, whereas it is known that the femoral neck and the radius are the most vulnerable sites to fracture. Hence, the aim of this study is to provide information on human cortical bone fracture behavior by comparing different anatomical sites including the radius and the femoral neck acquired from 32 elderly subjects (50 - 98 y.o.). In order to investigate the intrinsic fracture behavior of human cortical bone, toughness experiments were performed at two different strain rates: standard quasi-static conditions, and a higher strain rate representative of a fall from a standing position. The tests were performed on paired femoral neck, femoral, tibial and radius diaphyseal samples. Linear elastic fracture toughness and the non-linear J-integral method were used to take into account both the elastic and non-elastic behavior of cortical bone. Under quasi-static conditions, the radius presents a significantly higher toughness than the other sites. At the higher strain rate, all sites showed a significantly lower toughness. Also, at the high strain rate, there is no significant difference in fracture properties between the four anatomical sites. These results suggest that regardless of the anatomical site (femur, femoral neck, tibia and radius), the bone has the same fracture properties under fall loading conditions. This should be considered in biomechanical models under fall-like loading conditions.