1T'-transition metal dichalcogenide monolayers stabilized on 4H-Au nanowires for ultrasensitive SERS detection.

Unconventional 1T'-phase transition metal dichalcogenides (TMDs) have aroused tremendous research interest due to their unique phase-dependent physicochemical properties and applications. However, due to the metastable nature of 1T'-TMDs, the controlled synthesis of 1T'-TMD monolayers (MLs) with high phase purity and stability still remains a challenge. Here we report that 4H-Au nanowires (NWs), when used as templates, can induce the quasi-epitaxial growth of high-phase-purity and stable 1T'-TMD MLs, including WS2, WSe2, MoS2 and MoSe2, via a facile and rapid wet-chemical method. The as-synthesized 4H-Au@1T'-TMD core-shell NWs can be used for ultrasensitive surface-enhanced Raman scattering (SERS) detection. For instance, the 4H-Au@1T'-WS2 NWs have achieved attomole-level SERS detections of Rhodamine 6G and a variety of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike proteins. This work provides insights into the preparation of high-phase-purity and stable 1T'-TMD MLs on metal substrates or templates, showing great potential in various promising applications.

Phase Engineering of Nanomaterials: Transition Metal Dichalcogenides.

Crystal phase, a critical structural characteristic beyond the morphology, size, dimension, facet, etc., determines the physicochemical properties of nanomaterials. As a group of layered nanomaterials with polymorphs, transition metal dichalcogenides (TMDs) have attracted intensive research attention due to their phase-dependent properties. Therefore, great efforts have been devoted to the phase engineering of TMDs to synthesize TMDs with controlled phases, especially unconventional/metastable phases, for various applications in electronics, optoelectronics, catalysis, biomedicine, energy storage and conversion, and ferroelectrics. Considering the significant progress in the synthesis and applications of TMDs, we believe that a comprehensive review on the phase engineering of TMDs is critical to promote their fundamental studies and practical applications. This Review aims to provide a comprehensive introduction and discussion on the crystal structures, synthetic strategies, and phase-dependent properties and applications of TMDs. Finally, our perspectives on the challenges and opportunities in phase engineering of TMDs will also be discussed.

Recent Progress on Phase Engineering of Nanomaterials.

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Phase-dependent growth of Pt on MoS2 for highly efficient H2 evolution.

Crystal phase is a key factor determining the properties, and hence functions, of two-dimensional transition-metal dichalcogenides (TMDs)1,2. The TMD materials, explored for diverse applications3-8, commonly serve as templates for constructing nanomaterials3,9 and supported metal catalysts4,6-8. However, how the TMD crystal phase affects the growth of the secondary material is poorly understood, although relevant, particularly for catalyst development. In the case of Pt nanoparticles on two-dimensional MoS2 nanosheets used as electrocatalysts for the hydrogen evolution reaction7, only about two thirds of Pt nanoparticles were epitaxially grown on the MoS2 template composed of the metallic/semimetallic 1T/1T' phase but with thermodynamically stable and poorly conducting 2H phase mixed in. Here we report the production of MoS2 nanosheets with high phase purity and show that the 2H-phase templates facilitate the epitaxial growth of Pt nanoparticles, whereas the 1T' phase supports single-atomically dispersed Pt (s-Pt) atoms with Pt loading up to 10 wt%. We find that the Pt atoms in this s-Pt/1T'-MoS2 system occupy three distinct sites, with density functional theory calculations indicating for Pt atoms located atop of Mo atoms a hydrogen adsorption free energy of close to zero. This probably contributes to efficient electrocatalytic H2 evolution in acidic media, where we measure for s-Pt/1T'-MoS2 a mass activity of 85 ± 23 A [Formula: see text] at the overpotential of -50 mV and a mass-normalized exchange current density of 127 A [Formula: see text] and we see stable performance in an H-type cell and prototype proton exchange membrane electrolyser operated at room temperature. Although phase stability limitations prevent operation at high temperatures, we anticipate that 1T'-TMDs will also be effective supports for other catalysts targeting other important reactions.

Structural Transformation of Unconventional-Phase Materials.

The structural transformation of materials, which involves the evolution of different structural features, including phase, composition, morphology, etc., under external conditions, represents an important fundamental phenomenon and has drawn substantial research interest. Recently, materials with unconventional phases that are different from their thermodynamically stable ones have been demonstrated to possess distinct properties and compelling functions and can further serve as starting materials for structural transformation studies. The identification and mechanism study of the structural transformation process of unconventional-phase starting materials can not only provide deep insights into their thermodynamic stability in potential applications but also offer effective approaches for the synthesis of other unconventional structures. Here, we briefly summarize the recent research progress on the structural transformation of some typical starting materials with various unconventional phases, including the metastable crystalline phase, amorphous phase, and heterophase, induced by different approaches. The importance of unconventional-phase starting materials in the structural modulation of resultant intermediates and products will be highlighted. The employment of diverse in situ/operando characterization techniques and theoretical simulations in studying the mechanism of the structural transformation process will also be introduced. Finally, we discuss the existing challenges in this emerging research field and provide some future research directions.

Synthesis of 2H/fcc-Heterophase AuCu Nanostructures for Highly Efficient Electrochemical CO2 Reduction at Industrial Current Densities.

Structural engineering of nanomaterials offers a promising way for developing high-performance catalysts toward catalysis. However, the delicate modulation of thermodynamically unfavorable nanostructures with unconventional phases still remains a challenge. Here, the synthesis of hierarchical AuCu nanostructures is reported with hexagonal close-packed (2H-type)/face-centered cubic (fcc) heterophase, high-index facets, planar defects (e.g., stacking faults, twin boundaries, and grain boundaries), and tunable Cu content. The obtained 2H/fcc Au99 Cu1 hierarchical nanosheets exhibit excellent performance for the electrocatalytic CO2 reduction to produce CO, outperforming the 2H/fcc Au91 Cu9 and fcc Au99 Cu1 . The experimental results, especially those obtained by in-situ differential electrochemical mass spectroscopy and attenuated total reflection Fourier-transform infrared spectroscopy, suggest that the enhanced catalytic performance of 2H/fcc Au99 Cu1 arises from the unconventional 2H/fcc heterophase, high-index facets, planar defects, and appropriate alloying of Cu. Impressively, the 2H/fcc Au99 Cu1 shows CO Faradaic efficiencies of 96.6% and 92.6% at industrial current densities of 300 and 500 mA cm-2 , respectively, as well as good durability, placing it among the best CO2 reduction electrocatalysts for CO production. The atomically structural regulation based on phase engineering of nanomaterials (PEN) provides an avenue for the rational design and preparation of high-performance electrocatalysts for various catalytic applications.

Reversible Semimetal-Semiconductor Transition of Unconventional-Phase WS2 Nanosheets.

Phase transition with band gap modulation of materials has gained intensive research attention due to its various applications, including memories, neuromorphic computing, and transistors. As a powerful strategy to tune the crystal phase of transition-metal dichalcogenides (TMDs), the phase transition of TMDs provides opportunities to prepare new phases of TMDs for exploring their phase-dependent property, function, and application. However, the previously reported phase transition of TMDs is mainly irreversible. Here, we report a reversible phase transition in the semimetallic 1T'-WS2 driven by proton intercalation and deintercalation, resulting in a newly discovered semiconducting WS2 with a novel unconventional phase, denoted as the 1T'd phase. Impressively, an on/off ratio of >106 has been achieved during the phase transition of WS2 from the semimetallic 1T' phase to the semiconducting 1T'd phase. Our work not only provides a unique insight into the phase transition of TMDs via proton intercalation but also opens up possibilities to tune their physicochemical properties for various applications.

Ligand-Assisted Phase Engineering of Nanomaterials.

ConspectusThe synthesis of monodisperse colloidal nanomaterials with well-defined structures is important for both fundamental research and practical application. To achieve it, wet-chemical methods with the usage of various ligands have been extensively explored to finely control the structure of nanomaterials. During the synthesis, ligands cap the surface and thus modulate the size, shape, and stability of nanomaterials in solvents. Besides these widely investigated roles of ligands, it has been recently discovered that ligands can affect the phase of nanomaterials, i.e., their atomic arrangement, providing an effective strategy to realize the phase engineering of nanomaterials (PEN) by selecting appropriate ligands. Nanomaterials normally exist in the phases that are thermodynamically stable in their bulk states. Previous studies have shown that under high temperature or high pressure, nanomaterials can exist in unconventional phases which are unattainable in the bulks. Importantly, nanomaterials with unconventional phases exhibit unique properties and functions different from conventional-phase ones. Consequently, it is feasible to utilize the PEN to tune the physicochemical properties and application performance of nanomaterials. During wet-chemical synthesis, ligands binding to the surface of nanomaterials can modify their surface energy, which could significantly affect the Gibbs free energy of nanomaterials and thus determine the stability of different phases, making it possible to obtain nanomaterials with unconventional phases at mild reaction conditions. For instance, a series of Au nanomaterials with unconventional hexagonal phases have been prepared with the assistance of oleylamine. Therefore, the rational design and selection of different ligands and deep understanding of their effect on the phase of nanomaterials would significantly accelerate the development of PEN and the discovery of novel functional nanomaterials for diverse applications.In this Account, we briefly summarize the recent progress in ligand-assisted PEN, elaborating the important roles of different ligands in the direct synthesis of nanomaterials with unconventional crystal phases and amorphous phase as well as the phase transformation of nanomaterials. We first introduce the background of this research topic, highlighting the concept of PEN and why ligands can modulate the phase of nanomaterials. Then we discuss the usage of four kinds of ligands, i.e., amines, fatty acids, sulfur-containing ligands, and phosphorus-containing ligands, in phase engineering of different nanomaterials, especially metal, metal chalcogenide, and metal oxide nanomaterials. Finally, we provide our personal views of the challenges and future promising research directions in this exciting field.

Seeded Synthesis of Hollow PdSn Intermetallic Nanomaterials for Highly Efficient Electrocatalytic Glycerol Oxidation.

Intermetallic nanomaterials have shown promising potential as high-performance catalysts in various catalytic reactions due to their unconventional crystal phases with ordered atomic arrangements. However, controlled synthesis of intermetallic nanomaterials with tunable crystal phases and unique hollow morphologies remains a challenge. Here, a seeded method is developed to synthesize hollow PdSn intermetallic nanoparticles (NPs) with two different intermetallic phases, that is, orthorhombic Pd2 Sn and monoclinic Pd3 Sn2 . Benefiting from the rational regulation of the crystal phase and morphology, the obtained hollow orthorhombic Pd2 Sn NPs deliver excellent electrocatalytic performance toward glycerol oxidation reaction (GOR), outperforming solid orthorhombic Pd2 Sn NPs, hollow monoclinic Pd3 Sn2 NPs, and commercial Pd/C, which places it among the best reported Pd-based GOR electrocatalysts. The reaction mechanism of GOR using the hollow orthorhombic Pd2 Sn as the catalyst is investigated by operando infrared reflection absorption spectroscopy, which reveals that the hollow orthorhombic Pd2 Sn catalyst cleaves the CC bond more easily compared to the commercial Pd/C. This work can pave an appealing route to the controlled synthesis of diverse novel intermetallic nanomaterials with hollow morphology for various promising applications.

Epitaxial growth of highly symmetrical branched noble metal-semiconductor heterostructures with efficient plasmon-induced hot-electron transfer.

Epitaxial growth is one of the most commonly used strategies to precisely tailor heterostructures with well-defined compositions, morphologies, crystal phases, and interfaces for various applications. However, as epitaxial growth requires a small interfacial lattice mismatch between the components, it remains a challenge for the epitaxial synthesis of heterostructures constructed by materials with large lattice mismatch and/or different chemical bonding, especially the noble metal-semiconductor heterostructures. Here, we develop a noble metal-seeded epitaxial growth strategy to prepare highly symmetrical noble metal-semiconductor branched heterostructures with desired spatial configurations, i.e., twenty CdS (or CdSe) nanorods epitaxially grown on twenty exposed (111) facets of Ag icosahedral nanocrystal, albeit a large lattice mismatch (more than 40%). Importantly, a high quantum yield (QY) of plasmon-induced hot-electron transferred from Ag to CdS was observed in epitaxial Ag-CdS icosapods (18.1%). This work demonstrates that epitaxial growth can be achieved in heterostructures composed of materials with large lattice mismatches. The constructed epitaxial noble metal-semiconductor interfaces could be an ideal platform for investigating the role of interfaces in various physicochemical processes.

Two-Dimensional Nanomaterial-Templated Composites.

ConspectusTwo-dimensional (2D) nanomaterials have attracted increasing research interest since mechanically exfoliated graphene was obtained in 2004. The ultrathin thickness and relatively large lateral size of 2D nanomaterials render them various intriguing properties such as compelling electronic properties, ultrahigh specific surface area, excellent mechanical properties, and so on. A wide range of 2D nanomaterials, including graphene and its derivatives, transition metal dichalcogenides (TMDs), metals, etc., have been prepared with different compositions, structures and (crystal) phases. Simultaneously, extensive research efforts have been devoted to exploring the potential applications of these 2D nanomaterials with enhanced performances. Hybridization of two or more nanomaterials to prepare novel composites could efficiently integrate the advantages of the individual components and thus optimize their performances for specific applications. Among various hybridization approaches, the templated synthesis method, i.e., using a presynthesized nanomaterial as a template to direct the growth of a secondary nanostructure, provides an efficient way to prepare composites with high controllability. The ultrathin thickness, large specific surface area, and versatile physiochemical properties of 2D nanomaterials make them ideal templates for constructing composites with desired structures, properties, and functions. Until now, various 2D nanomaterials have been used as templates to grow different kinds of nanomaterials, including metals, metal oxides, metal chalcogenides, metal-organic frameworks (MOFs), etc., to form 2D nanomaterial-templated composites that show potentials in various applications. In this Account, we first briefly introduce the general research background of 2D nanomaterials and the motivation for the preparation of 2D nanomaterial-templated composites. Then we summarize our progress and some other representative work on 2D nanomaterial-templated composites, with a particular emphasis on graphene-templated composites, 2D TMD-templated composites, and 2D metal-templated composites. Specifically, representative examples of the graphene-templated zero-dimensional (0D), one-dimensional (1D), and 2D composites and the emerging graphene-templated van der Waals heterostructures are described. Subsequently, typical 2D TMD-templated composites such as metal oxides, metals, and metal chalcogenides are also presented. In addition, we introduce 2D metal-templated composites and highlight that the crystal phase of the 2D metal template can play an important role in the controlled synthesis of heterostructures. Other composites constructed using 2D metal oxides, metal hydroxides, metal sulfides, and MOFs as templates are also introduced. After that, we demonstrate the potential applications of 2D nanomaterial-templated composites, including electrocatalysis, electronic devices, batteries, and so on. Finally, after a brief summary, our personal insights on the challenges and future research directions in this emerging field are also proposed.

In situ Observation of Structural Evolution and Phase Engineering of Amorphous Materials during Crystal Nucleation.

The nucleation pathway determines the structures and thus properties of formed nanomaterials, which is governed by the free energy of the intermediate phase during nucleation. The amorphous structure, as one of the intermediate phases during nucleation, plays an important role in modulating the nucleation pathway. However, the process and mechanism of crystal nucleation from amorphous structures still need to be fully investigated. Here, in situ aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) is employed to conduct real-time imaging of the nucleation of ultrathin amorphous nanosheets (NSs). The results indicate that their nucleation contains three distinct stages, i.e., aggregation of atoms, crystallization to form lattice-expanded nanocrystals, and relaxation of the lattice-expanded nanocrystals to form final nanocrystals. In particular, the crystallization processes of various amorphous materials are investigated systematically to form corresponding nanocrystals with unconventional crystalline phases, including face-centered-cubic (fcc) Ru, hexagonal-close-packed (hcp) Rh, and a new intermetallic IrCo alloy. In situ electron energy-loss spectroscopy (EELS) analysis unveils that the doped carbon in the original amorphous NSs can migrate to the surface during the nucleation process, stabilizing the obtained unconventional crystal phases transformed from the amorphous structures, which is also proven by density functional theory (DFT) calculations.

Plastic deformation in silicon nitride ceramics via bond switching at coherent interfaces.

Covalently bonded ceramics exhibit preeminent properties-including hardness, strength, chemical inertness, and resistance against heat and corrosion-yet their wider application is challenging because of their room-temperature brittleness. In contrast to the atoms in metals that can slide along slip planes to accommodate strains, the atoms in covalently bonded ceramics require bond breaking because of the strong and directional characteristics of covalent bonds. This eventually leads to catastrophic failure on loading. We present an approach for designing deformable covalently bonded silicon nitride (Si3N4) ceramics that feature a dual-phase structure with coherent interfaces. Successive bond switching is realized at the coherent interfaces, which facilitates a stress-induced phase transformation and, eventually, generates plastic deformability.

Wet-chemical synthesis of two-dimensional metal nanomaterials for electrocatalysis.

Two-dimensional (2D) metal nanomaterials have gained ever-growing research interest owing to their fascinating physicochemical properties and promising application, especially in the field of electrocatalysis. In this review, we briefly introduce the recent advances in wet-chemical synthesis of 2D metal nanomaterials. Subsequently, the catalytic performances of 2D metal nanomaterials in a variety of electrochemical reactions are illustrated. Finally, we summarize current challenges and highlight our perspectives on preparing high-performance 2D metal electrocatalysts.

Salt-Assisted 2H-to-1T' Phase Transformation of Transition Metal Dichalcogenides.

Phase engineering of nanomaterials (PEN) has demonstrated great potential in the fields of catalysis, electronics, energy storage and conversion, and condensed matter physics. Recently, transition metal dichalcogenides (TMDs) with unconventional metastable phases (e.g., 1T and 1T') have attracted increasing research interest due to their unique and appealing physicochemical properties. However, there is still a lack of a simple, universal, and controlled method for the preparation of large-scale and high-purity unconventional-phase TMD crystals, restricting their further fundamental study and practical applications. Here, a facile, one-step salt-assisted general strategy is reported for the controlled phase transformation of commercially available TMDs with conventional 2H phase, yielding a large amount of metastable 1T'-phase TMDs, including WS2 , WSe2 , MoS2 , and MoSe2 . It is found that the easily accessible metal salts, such as K2 C2 O4 ·H2 O, K2 CO3 , Na2 CO3 , Rb2 CO3 , Cs2 CO3 , KHCO3 , NaHCO3 , and NaC2 O4 , can be used to assist the 2H-to-1T' phase transformation, greatly simplifying the synthetic process for producing metastable 1T'-TMDs. Importantly, this method can also be used to prepare 1T'-TMD alloys, such as 1T'-WS2 x Se2(1- x ) . This newly developed strategy is robust and highly effective, which can also be used for the phase engineering of other materials with various polymorphs.

Preparation of Amorphous SnO2 -Encapsulated Multiphased Crystalline Cu Heterostructures for Highly Efficient CO2 Reduction.

Controlling the architectures and crystal phases of metal@semiconductor heterostructures is very important for modulating their physicochemical properties and enhancing their application performances. Here, a facile one-pot wet-chemical method to synthesize three types of amorphous SnO2 -encapsulated crystalline Cu heterostructures, i.e., hemicapsule, yolk-shell, and core-shell nanostructures, in which unconventional crystal phases (e.g., 2H, 4H, and 6H) and defects (e.g., stacking faults and twin boundaries) are observed in the crystalline Cu cores, is reported. The hemicapsule Cu@SnO2 heterostructures, with voids that not only expose the Cu core with unconventional phases but also retain the interface between Cu and SnO2 , show an excellent electrocatalytic CO2 reduction reaction (CO2 RR) selectivity toward the production of CO and formate with high Faradaic efficiency (FE) above 90% in a wide potential window from -1.05 to -1.55 V (vs reversible hydrogen electrode (RHE)), and the highest FE of CO2 RR (95.3%) is obtained at -1.45 V (vs RHE). This work opens up a new way for the synthesis of new heterostructured nanomaterials with promising catalytic application.

Synthesis of Pd3 Sn and PdCuSn Nanorods with L12 Phase for Highly Efficient Electrocatalytic Ethanol Oxidation.

The crystal phase of nanomaterials is one of the key parameters determining their physicochemical properties and performance in various applications. However, it still remains a great challenge to synthesize nanomaterials with different crystal phases while maintaining the same composition, size, and morphology. Here, a facile, one-pot, wet-chemical method is reported to synthesize Pd3 Sn nanorods with comparable size and morphology but different crystal phases, that is, an ordered intermetallic and a disordered alloy with L12 and face-centered cubic (fcc) phases, respectively. The crystal phase of the as-synthesized Pd3 Sn nanorods is easily tuned by altering the types of tin precursors and solvents. Moreover, the approach can also be used to synthesize ternary PdCuSn nanorods with the L12 crystal phase. When used as electrocatalysts, the L12 Pd3 Sn nanorods exhibit superior electrocatalytic performance toward the ethanol oxidation reaction (EOR) compared to their fcc counterpart. Impressively, compared to the L12 Pd3 Sn nanorods, the ternary L12 PdCuSn nanorods exhibit more enhanced electrocatalytic performance toward the EOR, yielding a high mass current density up to 6.22 A mgPd -1 , which is superior to the commercial Pd/C catalyst and among the best reported Pd-based EOR electrocatalysts.

Preparation of fcc-2H-fcc Heterophase Pd@Ir Nanostructures for High-Performance Electrochemical Hydrogen Evolution.

With the development of phase engineering of nanomaterials (PEN), construction of noble-metal heterostructures with unconventional crystal phases, including heterophases, has been proposed as an attractive approach toward the rational design of highly efficient catalysts. However, it still remains challenging to realize the controlled preparation of such unconventional-phase noble-metal heterostructures and explore their crystal-phase-dependent applications. Here, various Pd@Ir core-shell nanostructures are synthesized with unconventional fcc-2H-fcc heterophase (2H: hexagonal close-packed; fcc: face-centered cubic) through a wet-chemical seeded method. As a result, heterophase Pd66 @Ir34 nanoparticles, Pd45 @Ir55 multibranched nanodendrites, and Pd68 @Ir22 Co10 trimetallic nanoparticles are obtained via the phase-selective epitaxial growth of fcc-2H-fcc-heterophase Ir-based nanostructures on 2H-Pd seeds. Importantly, the heterophase Pd45 @Ir55 nanodendrites exhibit excellent catalytic performance toward electrochemical hydrogen evolution reaction (HER) under acidic conditions. An overpotential of only 11.0 mV is required to achieve a current density of 10 mA cm-2 on Pd45 @Ir55 nanodendrites, which is lower than those of the conventional fcc-Pd47 @Ir53 counterparts, commercial Ir/C and Pt/C. This work not only demonstrates an appealing route to synthesize novel heterophase nanomaterials for promising applications in the emerging field of PEN, but also highlights the significant role of the crystal phase in determining their catalytic properties.

Preparation of Au@Pd Core-Shell Nanorods with fcc-2H-fcc Heterophase for Highly Efficient Electrocatalytic Alcohol Oxidation.

Controlled construction of bimetallic nanostructures with a well-defined heterophase is of great significance for developing highly efficient nanocatalysts and investigating the structure-dependent catalytic performance. Here, a wet-chemical synthesis method is used to prepare Au@Pd core-shell nanorods with a unique fcc-2H-fcc heterophase (fcc: face-centered cubic; 2H: hexagonal close-packed with a stacking sequence of "AB"). The obtained fcc-2H-fcc heterophase Au@Pd core-shell nanorods exhibit superior electrocatalytic ethanol oxidation performance with a mass activity as high as 6.82 A mgPd-1, which is 2.44, 6.96, and 6.43 times those of 2H-Pd nanoparticles, fcc-Pd nanoparticles, and commercial Pd/C, respectively. The operando infrared reflection absorption spectroscopy reveals a C2 pathway with fast reaction kinetics for the ethanol oxidation on the prepared heterophase Au@Pd nanorods. Our experimental results together with density functional theory calculations indicate that the enhanced performance of heterophase Au@Pd nanorods can be attributed to the unconventional 2H phase, the 2H/fcc phase boundary, and the lattice expansion of the Pd shell. Moreover, the heterophase Au@Pd nanorods can also serve as an efficient catalyst for the electrochemical oxidation of methanol, ethylene glycol, and glycerol. Our work in the area of phase engineering of nanomaterials (PENs) opens the way for developing high-performance electrocatalysts toward future practical applications.

Seeded Synthesis of Unconventional 2H-Phase Pd Alloy Nanomaterials for Highly Efficient Oxygen Reduction.

Crystal phase engineering of noble-metal-based alloy nanomaterials paves a new way to the rational synthesis of high-performance catalysts for various applications. However, the controlled preparation of noble-metal-based alloy nanomaterials with unconventional crystal phases still remains a great challenge due to their thermodynamically unstable nature. Herein, we develop a robust and general seeded method to synthesize PdCu alloy nanomaterials with unconventional hexagonal close-packed (hcp, 2H type) phase and also tunable Cu contents. Moreover, galvanic replacement of Cu by Pt can be further conducted to prepare unconventional trimetallic 2H-PdCuPt nanomaterials. Impressively, 2H-Pd67Cu33 nanoparticles possess a high mass activity of 0.87 A mg-1Pd at 0.9 V (vs reversible hydrogen electrode (RHE)) in electrochemical oxygen reduction reaction (ORR) under alkaline condition, which is 2.5 times that of the conventional face-centered cubic (fcc) Pd69Cu31 counterpart, revealing the important role of crystal phase on determining the ORR performance. After the incorporation of Pt, the obtained 2H-Pd71Cu22Pt7 catalyst shows a significantly enhanced mass activity of 1.92 A mg-1Pd+Pt at 0.9 V (vs RHE), which is 19.2 and 8.7 times those of commercial Pt/C and Pd/C, placing it among the best reported Pd-based ORR electrocatalysts under alkaline conditions.