Nanofibrillated Cellulose-Based Aerogels Functionalized with Tajuva (Maclura tinctoria) Heartwood Extract.

Aerogels are 3-D nanostructures of non-fluid colloidal interconnected porous networks consisting of loosely packed bonded particles that are expanded throughout their volume by gas and exhibit ultra-low density and high specific surface area. Cellulose-based aerogels can be obtained from hydrogels through a drying process, replacing the solvent (water) with air and keeping the pristine three-dimensional arrangement. In this work, hybrid cellulose-based aerogels were produced and their potential for use as dressings was assessed. Nanofibrilated cellulose (NFC) hydrogels were produced by a co-grinding process in a stone micronizer using a kraft cellulosic pulp and a phenolic extract from Maclura tinctoria (Tajuva) heartwood. NFC-based aerogels were produced by freeze followed by lyophilization, in a way that the Tajuva extract acted as a functionalizing agent. The obtained aerogels showed high porosity (ranging from 97% to 99%) and low density (ranging from 0.025 to 0.040 g·cm-3), as well a typical network and sheet-like structure with 100 to 300 µm pores, which yielded compressive strengths ranging from 60 to 340 kPa. The reached antibacterial and antioxidant activities, percentage of inhibitions and water uptakes suggest that the aerogels can be used as fluid absorbers. Additionally, the immobilization of the Tajuva extract indicates the potential for dentistry applications.

Cogrinding Wood Fibers and Tannins: Surfactant Effects on the Interactions and Properties of Functional Films for Sustainable Packaging Materials.

We report on the combination of cellulose nanofibrils (CNFs) and condensed tannins from Acacia mearnsii for the development of hybrid, functional films. The tannins are fractionated and concentrated in polyphenolics that are used for functional components in the hybrid materials. Cogrinding of wood fibers with the tannins in aqueous media allows simultaneous fiber deconstruction and in situ binding of tannins on the freshly exposed cellulosic surfaces. Hence, a tightly bound bicomponent system is produced, which is otherwise not possible if typical adsorption protocols are followed, mainly due to the extensive hydration typical of CNFs. A nonionic surfactant is used to tailor the cellulose-tannin interactions. The proposed strategy not only enables the incorporation of tannins with CNFs but also endows a high and prolonged antioxidant effect of films formed by filtration. Compared to tannin-free films, those carrying tannins are considerably more hydrophobic. In addition, they show selective absorption of ultraviolet light while maintaining optical transparency in the visible range. The proposed simple protocol for incorporating tannins and surfactants with CNFs is suitable to produce functional materials. This is possible by understanding associated interfacial phenomena in the context of sustainable materials within the concept of the circular bioeconomy.