Canal Transportation and Centring Ability of Reciproc and Reciproc Blue With or Without Use of Glide Path Instruments: A CBCT Study.

Objective: The objective of this ex vivo study was to evaluate canal transportation and centring ability of Reciproc and Reciproc blue systems in curved root canals with or without prior use of PathFile rotary system (PF) using Cone Beam Computed Tomography (CBCT). Methods: One hundred and twenty curved root canals from maxillary and mandibular premolars were selected. Canals were divided randomly into 4 groups (n=30): Reciproc 25 (R25), (PF+R25), Reciproc Blue 25 (RB25), (PF+RB 25). Specimens were scanned before and after root canal preparation. Using CBCT, root canal transportation and centring ability was assessed by measuring the shortest distance from the edge of uninstrumented canal to the periphery of the root (mesial and distal) before and after preparation. Data were analysed using a one-way analysis of variance and Tukey test. The p value was set at 0.05. Results: Less transportation and better centring ability occurred when PF was used before R25 or RB25 (P<0.0001). There was no significant difference between R25 and RB25 groups. Conclusion: Using PF before R25 and RB25 resulted in less root canal transportation and better centring ability. The specific thermo-mechanical treatment of RB25 did not provide better results when compared to R25.

Management of an Immature Necrotic Permanent Molar with Apical Periodontitis Treated by Regenerative Endodontic Protocol Using Calcium Hydroxide and MM-MTA: A Case Report with Two Years Follow Up.

Traditionally, immature teeth diagnosed with necrotic pulp and periapical periodontitis were treated by apexification with long-term calcium hydroxide or in one session with mineral trioxide aggregate (MTA) or Biodentine apical plug. However, these teeth become fragile and susceptible to root fracture. Regenerative endodontic procedure is a new therapeutic approach that promotes continuation of root growth in immature necrotic teeth potentially preventing root fracture. Only few case reports have shown the success of this procedure on molar cases. The current case report demonstrates a regeneration of a lower first molar with necrotic pulp and chronic apical abscess treated with Micro Mega-MTA (MM-MTA), a new endodontic biomaterial that has not been described previously. Calcium hydroxide was used as an intracanal medicament for two weeks. Next, calcium hydroxide was removed and after blood clot creation, MM-MTA® was placed over it. Apical healing and continuation of root growth were evident at nine months follow-up. CBCT at two years follow-up confirmed apical closure and complete healing. This case shows that a regenerative endodontic procedure for management of an immature necrotic permanent molar is feasible and can be successfully done using Ca(OH)2 and MM-MTA.

Dentinal crack formation during root canal preparations by the twisted file adaptive, Reciproc and WaveOne instruments.

OBJECTIVE: This study aimed to compare the frequency of dentinal microcracks after root canal shaping with 2 reciprocating (Reciproc and WaveOne) and 1 combined continuous reciprocating motion twisted files adaptive (TFA) rotary system. MATERIALS AND METHODS: Ninety molars were chosen and divided into three groups of 30 each. Root canal preparation was achieved by using Reciproc R25, Primary WaveOne and TFA systems. All the roots were horizontally sectioned at 15, 9, and 3 mm from the apex. The slices were then viewed each under a microscope at × 25 magnification to determine the presence of cracks. The absence/presence of cracks was recorded, and the data were analyzed with a Chi-square test. The significance level was set at P < 0.05. RESULTS: Instrumentation with Reciproc produced significantly more complete cracks than WaveOne and TFA (P = 0.032). The TFA system produced significantly less cracks then the Reciproc and WaveOne systems apically (P = 0.004). CONCLUSIONS: Within the limits of this study, the TFA system caused less cracks then the full reciprocating system (Reciproc and WaveOne). Single-file reciprocating files produced significantly more incomplete dentinal cracks than full-sequence adaptive rotary motion.

Micro-computed tomographic evaluation of canal transportation instrumented by different kinematics rotary nickel-titanium instruments.

INTRODUCTION: The purpose of this study was to evaluate and compare canal transportation of curved root canals by using 3 nickel-titanium systems: Reciproc, WaveOne, and Twisted Files Adaptive (TF). METHODS: Twenty-four extracted human mandibular molars with 2 separate mesial canals and severe angle of curvature were selected. Individual canals were divided randomly to 1 of the 3 experimental groups: Reciproc group, reciprocating instrumentation with Reciproc R25; WaveOne group, reciprocating instrumentation with the Primary WaveOne file; and TF Adaptive group, Adaptive Rotary Motion with the TF files. Each group consisted of 16 root canals. Specimens were scanned before and after root canal preparation with an isotropic resolution of 20 µm by using micro-computed tomography. The degree of canal transportation, in addition to instruments' centering ability, was recorded. RESULTS: Less transportation occurred with TF Adaptive rotary instruments (P < .0001). The mean degree of canal transportation in the apical third was significantly lower with TF Adaptive group (P < .0001). No significant difference was found between Reciproc and WaveOne systems (P = 1.000). Mean centering ratio was the highest statistically with TF Adaptive (P < .0001), followed by WaveOne, and was minimal with Reciproc (P < .05). CONCLUSIONS: The TF Adaptive system was found to have less canal transportation and better centering ability when compared with the reciprocating groups.

Cyclic fatigue resistance of newly manufactured rotary nickel titanium instruments used in different rotational directions.

The aim of this study was to investigate whether cyclic fatigue resistance is increased for nickel titanium instruments manufactured with improved heating processes in clockwise or counterclockwise continuous rotation. The instruments compared were produced either using the R-phase heat treatment (K3XF; SybronEndo, Orange, CA, USA) or the M-wire alloy (ProFile Vortex; DENTSPLY Tulsa Dental Specialties, Tulsa, OK, USA). Tests were performed with a specific cyclic fatigue device that evaluated cycles to failure of rotary instruments in curved artificial canals. Results indicated no significant difference in resistance to cyclic fatigue when rotary nickel titanium instruments are used in clockwise or counterclockwise continuous rotation. In both directions of rotation, size 04-25 K3XF showed a significant increase (P < 0.05) in the mean number of cycles to failure when compared with size 04-25 ProFile Vortex.

Influence of different angles of reciprocation on the cyclic fatigue of nickel-titanium endodontic instruments.

INTRODUCTION: The purpose of this study was to evaluate cyclic fatigue fracture resistance of engine-driven nickel-titanium (K3XF) instruments under reciprocating movement in various angles. METHODS: Fifty K3XF size 40 taper 0.06 nickel-titanium instruments were divided randomly into 5 groups of 10 each. All instruments were subjected to cyclic fatigue tests. Instruments in groups 1-4 were tested by using different reciprocating motions, whereas instruments of group 5 (control group) were used in continuous rotation. All instruments were rotated or reciprocated until fracture occurred. Time to fracture was recorded, and data were statistically analyzed by using one-way analysis of variance, followed by Tukey honestly significant difference test for comparison between different groups. RESULTS: All reciprocating groups (groups 1-4) showed a significant increase in time to failure when compared with group 5 (continuous rotation) (P < .05). Mean time was significantly higher in group 1, followed by group 2. No significant difference was found between groups 3 and 4 (P = .251). Increasing the clockwise angle of reciprocation and consequently increasing the angle of progression for each reciprocation cycle reduced the resistance to cyclic fatigue. CONCLUSIONS: Movement kinematics (reciprocating movements in various angles) had a significant influence on the cyclic fatigue life of the tested nickel-titanium instruments.

Taper preparation variability compared to current taper standards using computed tomography.

Introduction. The purpose of this study was to compare the taper variation in root canal preparations among Twisted Files and PathFiles-ProTaper .08 tapered rotary files to current standards. Methods. 60 root canals with severe angle of curvature (between 25° and 35°) and short radius (r < 10 mm) were selected. The canals were divided randomly into two groups of 30 each. After preparation with Twisted Files and PathFiles-ProTaper to size 25 taper .08, the diameter was measured using computed tomography (CT) at 1, 3, and 16 mm. Canal taper preparation was calculated at the apical third and at the middle-cervical third. Results. Of the 2 file systems, both fell within the ±.05 taper variability. All preparations demonstrated variability when compared to the nominal taper .08. In the apical third, mean taper was significantly different between TF and PathFiles-ProTaper (P value < 0.0001; independent t-test). Mean Taper was significantly higher with PathFile-ProTaper. In the middle-cervical third, mean Taper was significantly higher with TF (P value = 0.015; independent t-test). Conclusion. Taper preparations of the investigated size 25 taper .08 were favorable but different from the nominal taper.

Comparison of canal transportation and centering ability of twisted files, Pathfile-ProTaper system, and stainless steel hand K-files by using computed tomography.

INTRODUCTION: The purpose of this study was to compare canal transportation and centering ability of 2 rotary nickel-titanium (NiTi) systems (Twisted Files [TF] and Pathfile-ProTaper [PP]) with conventional stainless steel K-files. METHODS: Ninety root canals with severe curvature and short radius were selected. Canals were divided randomly into 3 groups of 30 each. After preparation with TF, PP, and stainless steel files, the amount of transportation that occurred was assessed by using computed tomography. Three sections from apical, mid-root, and coronal levels of the canal were recorded. Amount of transportation and centering ability were assessed. The 3 groups were statistically compared with analysis of variance and Tukey honestly significant difference test. RESULTS: Less transportation and better centering ability occurred with TF rotary instruments (P < .0001). K-files showed the highest transportation followed by PP system. PP system showed significant transportation when compared with TF (P < .0001). CONCLUSIONS: The TF system was found to be the best for all variables measured in this study.