Italian peninsula as a hybridization zone of Ixodes inopinatus and I. ricinus and the prevalence of tick-borne pathogens in I. inopinatus, I. ricinus, and their hybrids.

BACKGROUND: Ixodes inopinatus was described from Spain on the basis of morphology and partial sequencing of 16S ribosomal DNA. However, several studies suggested that morphological differences between I. inopinatus and Ixodes ricinus are minimal and that 16S rDNA lacks the power to distinguish the two species. Furthermore, nuclear and mitochondrial markers indicated evidence of hybridization between I. inopinatus and I. ricinus. In this study, we tested our hypothesis on tick dispersal from North Africa to Southern Europe and determined the prevalence of selected tick-borne pathogens (TBPs) in I. inopinatus, I. ricinus, and their hybrids. METHODS: Ticks were collected in Italy and Algeria by flagging, identified by sequencing of partial TROSPA and COI genes, and screened for Borrelia burgdorferi s.l., B. miyamotoi, Rickettsia spp., and Anaplasma phagocytophilum by polymerase chain reaction and sequencing of specific markers. RESULTS: Out of the 380 ticks, in Italy, 92 were I. ricinus, 3 were I. inopinatus, and 136 were hybrids of the two species. All 149 ticks from Algeria were I. inopinatus. Overall, 60% of ticks were positive for at least one TBP. Borrelia burgdorferi s.l. was detected in 19.5% of ticks, and it was significantly more prevalent in Ixodes ticks from Algeria than in ticks from Italy. Prevalence of Rickettsia spotted fever group (SFG) was 51.1%, with significantly greater prevalence in ticks from Algeria than in ticks from Italy. Borrelia miyamotoi and A. phagocytophilum were detected in low prevalence (0.9% and 5.2%, respectively) and only in ticks from Italy. CONCLUSIONS: This study indicates that I. inopinatus is a dominant species in Algeria, while I. ricinus and hybrids were common in Italy. The higher prevalence of B. burgdorferi s.l. and Rickettsia SFG in I. inopinatus compared with that in I. ricinus might be due to geographical and ecological differences between these two tick species. The role of I. inopinatus in the epidemiology of TBPs needs further investigation in the Mediterranean Basin.

Rhipicephalus sanguineus from Hungarian dogs: Tick identification and detection of tick-borne pathogens.

The brown dog tick, Rhipicephalus sanguineus is a complex of tick species with an unsettled species concept. In Europe, R. sanguineus is considered mainly a Mediterranean tick with sporadic findings in central and northern Europe. R. sanguineus is known as a vector of a range of pathogens of medical and veterinary importance, most of which not yet reported as autochthonous in Hungary. A total of 1839 ticks collected by veterinarians from dogs and cats were obtained in Hungary. The study aims at precise determination of ticks identified as R. sanguineus and detection of pathogens in collected ticks. All ticks were morphologically determined and 169 individuals were identified as R. sanguineus. A subset of 15 ticks was selected for molecular analysis (16S rDNA, 12S rDNA, COI). Phylogenetic analyses invariably placed sequences of all three markers into a single haplotype identified as R. sanguineus sensu stricto. All 169 brown dog ticks were tested for the presence of A. platys, E. canis, R. conorii, B. vogeli and H. canis. None of the investigated ticks was positive for the screened pathogens, though A. phagocytophilum sequence was detected in a single tick.

The "southeastern Europe" lineage of the brown dog tick Rhipicephalus sanguineus (sensu lato) identified as Rhipicephalus rutilus Koch, 1844: Comparison with holotype and generation of mitogenome reference from Israel.

The brown dog tick Rhipicephalus sanguineus (sensu lato) in the southeastern Mediterranean region and the Middle East is difficult to identify due to the presence of multiple mitochondrial DNA haplogroup lineages. The purpose of this study was to clarify the identity of the "southeastern Europe" lineage of this tick species complex. Our research shows that female ticks of the "southeastern Europe" lineage correspond to the morphology of R. rutilus Koch, 1844 as found in type-material at the Museum für Naturkunde Berlin in Germany. We characterised the complete mitogenomes of R. rutilus, R. turanicus Pomerantsev, 1940 and Rhipicephalus sanguineus (Latreille, 1806) in order to improve our understanding of the phylogenetic relationships among species within the R. sanguineus (sensu lato) complex. The material associated with the morphology of R. rutilus was previously labelled as the "southeastern Europe" lineage and found in Israel and Egypt, including Lower Egypt and the Nile Delta, where the original type-material was collected. Based on the morphology, genetic identity, and geographical distribution of the species, we conclude that the name R. rutilus is correctly linked to the "southeastern Europe" lineage of R. sanguineus (sensu lato).

New white light-emitting halochromic stilbenes with remarkable quantum yields and aggregation-induced emission.

Highly efficient single-component white light emitters (SWLEs), are attractive candidates for the simple and cost-effective fabrication of high-performance lighting devices. This study introduced a donor-π-acceptor and a donor-π-donor stilbene-based chromophores, representing pH-responsive fluorescence. The emitters showed yellow and green fluorescence in their neutral form. At the same time, protonation of the chromophores caused blue fluorescence color with a strong hypsochromic shift. The white light emission (WLE) for these chromophores was observed at approximately pH 3 due to the simultaneous presence of the neutral and protonated forms of the chromophores, covering almost all the emission spectra in the visible region (400-700 nm). These chromophores presented exceptional white light quantum yields (Φ) between 31 and 54%, which was desirable for producing white light-emitting devices. Density functional theory (DFT) and time-dependent (TD)-DFT were applied to study the structural and electronic properties of the chromophores.

A Sero-Epidemiological Study on Visceral Leishmaniasis among Volunteer Children and Adults in Rural Areas of Shahroud, Iran 2018-2019.

Background: Visceral leishmaniasis (VL) also known as Kala-azar is considered as one of the zoonotic infections in Mediterranean countries. The disease reservoir and vectors are dogs and sandflies respectively. Due to reported sporadic cases of Kala-azar in the past five years in Shahroud County, Semnan Province, Iran, this study aimed to investigate the status of this infection in this area and to determine its seroepidemiology to take required measurements for infection control and treatment. Methods: This study was conducted on 504 subjects residing in seven villages in Shahroud County. Blood samples were randomly selected using the cluster sampling method and were collected from subjects aged up to 13 years old (90%) and adults over 13 years old (10%) from September to May 2019. After separating sera from whole blood, samples were subjected to direct agglutination test (DAT) to detect anti-Leishmania infantum antibodies. A range of 1:10 to 1:800 dilutions were prepared from the samples. Results: Results of 1:800 titration indicated that no sample was positive for antibodies against L. infantum. After the secondary screening, 10 cases (1.98%) showed the antibody titer of 1:100, while four cases (0.79%) showed the antibody titer of 1:400. Of 14 cases with the L. infantum antibodies, all were detected from the children <13 years old. According to clinical findings, no patient was suffering from fever, weight loss, splenomegaly, hepatomegaly, and cachexia and therefore did not show the Kala-azar symptoms. Conclusion: The results of the current study indicate that Kala-azar is not prevalent in Shahroud County.

The Geographical Distribution of Human Cutaneous and Visceral Leishmania Species Identified by Molecular Methods in Iran: A Systematic Review With Meta-Analysis.

Leishmaniasis is one of the most common vector-borne parasitic diseases in Iran. Leishmania species identification is necessary for epidemiological aspects, precise prognosis, control and treatment of the disease. We systematically searched all the studies, reports, and documentation related to species identification and geographical distribution of causative agents of cutaneous (CL), mucosal (ML), and visceral leishmaniasis (VL) using DNA-based molecular diagnostic techniques in Iran. International databases including PubMed, ScienceDirect, Embase, Google Scholar, Scopus, and Web of Science were systemically searched for English articles and Iran's databases including SID, IranMedex and Magiran were searched for Persian reports and articles. Searches were performed from 1999 to 2019 (20 years). The current review was conducted using the keywords: cutaneous leishmaniasis, visceral leishmaniasis, Leishmania species, Human, Molecular, PCR, and Iran. The study quality was evaluated using the NOS checklist. This meta-analysis procedure was accomplished using STATA, version 2.7.9. Of the 3,426 records identified in the initial search, 154 articles met inclusion criteria and qualified for the systematic review and meta-analysis. In subgroup analysis, the pooled frequency of causative agents of CL isolates was 67.3% (95% CI: 59.51-74.67%) for L. major and 32.1% (95% CI: 24.72-39.87%) for L. tropica. In addition, the pooled frequency of causative agents of VL isolates was 97.1% (95% CI: 94.6-98.8%) for L. infantum and 2.9% (95% CI: 1.12-5.37%) for L. tropica. The findings of this study showed that the main causative agents of CL and VL in Iran are L. major and L. infantum, respectively. Moreover, kinetoplast DNA (kDNA) and internal transcriber spacer (ITS) were the most used markers for identifying Leishmania species. The current study provides valuable data to encourage and direct researchers as well as public health managers in the comprehensive leishmaniasis control and prevention planning in Iran.

A novel donor-π-acceptor halochromic 2,6-distyrylnaphthalene chromophore: synthesis, photophysical properties and DFT studies.

In this study a new 2,6-distyryl naphthalene [2-((4-((E)-2-(6-((E)-2,4-bis(methylsulfonyl)styryl)naphthalen-2-yl)vinyl)phenyl)(ethyl)amino)ethan-1-ol; ASDSN] was synthesized successfully using Heck chemistry as the main reaction. The ASDSN compound is a donor-pi-acceptor (D-π-A) conjugated system with amino as electron donating and sulfonyl as electron withdrawing groups. The UV-vis absorption of ASDSN was observed in the range of 403-417 nm with high molar extinction coefficients (ε = 15 300-56 200 M-1 cm-1) in some different solvents. This new fluorescent 2,6-distyryl naphthalene compound emits in the yellow region of the visible spectrum (557 nm) with Stokes shifts of 5930 cm-1. ASDSN is a pH-responsive fluorescence compound that shows yellow fluorescence in neutral form and blue fluorescence in the protonated form. A white light emission (WLE) for the chromophore was observed at pH = 3.0. The ASDSN chromophore presented a satisfactory white light quantum yield (Φ) of 13% which was desirable for producing white light emitting devices. Density functional theory (DFT) and time-dependent (TD)-DFT were applied to study structural and electronic properties of the chromophore.

High-Strength, Low-Permeable, and Light-Protective Nanocomposite Films Based on a Hybrid Nanopigment and Biodegradable PLA for Food Packaging Applications.

Herein, a multifunctional filler, a dye (organic)-clay (inorganic) hybrid nanopigment (DCNP), was embedded into polylactic acid (PLA) to fabricate a colored biodegradable/biocompatible film, which is explored as a high thermomechanical resistant as well as a superior light and mass transport barrier for food packaging applications. In this respect, the DCNP was synthesized through a wet chemical process with a reaction yield of 76% and incorporated into a PLA matrix at various concentrations using a solution casting method. The morphological characterizations revealed partially intercalated/exfoliated structure for PLA-DCNP films. The samples filled with DCNP showed up to 20% and 12 °C improvements in storage modulus (E') and glass transition temperature (T g), respectively, compared to those with neat PLA. Incorporation of a small amount of DCNP into the PLA matrix significantly declined the water vapor and gas permeability of PLA by 36 and 54%, respectively. The optical property investigations indicated remarkable color characteristics and light protection performance of the samples containing DCNP. The results also showed better performance of the PLA-DCNP film compared to that of the PLA-Cloisite 20A sample at an identical filler loading. In conclusion, the desirable properties of the resulting films highlighted the potential application of such nanocomposite films as a promising option for food packaging materials.

Nondestructive, fast, and cost-effective image processing method for roughness measurement of randomly rough metallic surfaces.

In recent years, various surface roughness measurement methods have been proposed as alternatives to the commonly used stylus profilometry, which is a low-speed, destructive, expensive but precise method. In this study, a novel method, called "image profilometry," has been introduced for nondestructive, fast, and low-cost surface roughness measurement of randomly rough metallic samples based on image processing and machine vision. The impacts of influential parameters such as image resolution and filtering approach for elimination of the long wavelength surface undulations on the accuracy of the image profilometry results have been comprehensively investigated. Ten surface roughness parameters were measured for the samples using both the stylus and image profilometry. Based on the results, the best image resolution was 800 dpi, and the most practical filtering method was Gaussian convolution+cutoff. In these conditions, the best and worst correlation coefficients (R2) between the stylus and image profilometry results were 0.9892 and 0.9313, respectively. Our results indicated that the image profilometry predicted the stylus profilometry results with high accuracy. Consequently, it could be a viable alternative to the stylus profilometry, particularly in online applications.

How accurately do different computer-based texture characterization methods predict material surface coarseness? A guideline for effective online inspection.

The growing industrialization has emphasized the need for high-performance computer-based inspection methods. Here, we investigated the performance of four major computer-based texture characterization methods in the prediction of visually perceived and actual surface coarseness of real materials. Gray level co-occurrence matrix (GLCM), distance-dependent edge frequency (DDEF), fractal dimension (FD), and histogram skewness (SK) were used as the methods. A novel collection of real materials consisting of 20 sandpapers with high, medium, and low coarseness levels was employed. The results revealed that at high coarseness level the most precise prediction of actual surface coarseness was made by GLCM and SK, while in the prediction of visual coarseness all the methods worked similarly effectively. Perfect correlations were observed between GLCM, FD, and SK at visual and also actual coarseness at medium coarseness level. At low coarseness level, SK and DDEF acceptably predicted visual and actual coarseness, respectively. The image resolution impact on performance of the computer-based methods was found to be substantial. Results of the research present a guideline for choosing the best computer-based method as a viable substitute for the human observer in online inspections of materials' texture.