Scapular morphology variation affects reverse total shoulder arthroplasty biomechanics. A predictive simulation study using statistical and musculoskeletal shoulder models.

Reverse total shoulder arthroplasty (RTSA) accounts for over half of shoulder replacement surgeries. At present, the optimal position of RTSA components is unknown. Previous biomechanical studies have investigated the effect of construct placement to quantify mobility, stability and functionality postoperatively. While studies have provided valuable information on construct design and surgical placement, they have not systematically evaluated the importance of scapular morphology on biomechanical outcomes. The aim of this study was to assess the influence of scapular morphology variation on RTSA biomechanics using statistical models, musculoskeletal modeling and predictive simulation. The scapular geometry of a musculoskeletal model was altered across six modes of variation at four levels (±1 and ±3 SD) from a clinically derived statistical shape model. For each model, a standardized virtual surgery was performed to place RTSA components in the same relative position on each model then implemented in 50 predictive simulations of upward and lateral reaching tasks. Results showed morphology affected functional changes in the deltoid moment arms and recruitment for the two tasks. Variation of the anatomy that reduced the efficiency of the deltoids showed increased levels of muscle force production, joint load magnitude and shear. These findings suggest that scapular morphology plays an important role in postoperative biomechanical function of the shoulder with an implanted RTSA. Furthermore a "one-size-fits-all" approach for construct surgical placement may lead to suboptimal patient outcomes across a clinical population. Patient glenoid as well as scapular anatomy may need to be carefully considered when planning RTSA to optimize postoperative success.

Statistical Shape and Bone Property Models of Clinical Populations as the Foundation for Biomechanical Surgical Planning: Application to Shoulder Arthroplasty.

This work developed, validated, and compared statistical shape, statistical intensity, and statistical shape and intensity models (SSMs, SIMs, SSIMs) of scapulae from a clinical population. SSMs efficiently describe bone shape variation while SIMs describe bone material property variation, and SSIM's combine description of both variables. This work establishes these models' efficacy and whether they can be used in surgical planning. Models were developed using shoulder arthroplasty data of patients with bone erosion, which is challenging to treat and would benefit from improved surgical planning. Models were created using previously validated nonrigid registration and material property assignment processes that were optimized for scapula characteristics. The models were assessed using standard metrics, anatomical measurements, and correlation analyses. The SSM and SIM specificity and generalization error metrics were 3.4 mm and <1 mm and 184 HU and 156 HU, respectively. The SSIM did not achieve the same level of performance as the SSM and SIM in this study (e.g., shape generalization: SSIM-2.2 mm versus SSM-<1 mm). Anatomical correlation analysis showed that the SSM more effectively and efficiently described shape variation compared to the SSIM. The SSM and SIM modes of variation were not strongly correlated (e.g., rmax = 0.56 for modes explaining ≤2.1% of variance). The SSIM is outperformed by the SSM and SIM and the latter two are not strongly correlated; therefore, using the SSM and SIM in conjunction will generate synthetic bone models with realistic characteristics and thus can be used for biomechanical surgical planning applications.

Sex Differences in Spatiotemporal Gait Parameters of Transtibial Amputees.

Research addressing lower limb amputee gait and prosthetic design often focuses on men, despite female lower limb amputees having different risk factors and lower success with their prosthetics overall. It is widely agreed that sex differences exist in able-bodied gait, but research analyzing sex differences in amputee gait is rare. This study compared male and female transtibial amputee gait to ascertain potential sex differences. Forty-five transtibial amputees were asked to walk at their self-selected speed, and spatiotemporal gait data were obtained. Both the mean and variability metric of parameters were analyzed for 10 male and 10 female participants. For all participants, amputated limbs had a shorter stance time, longer swing time, and larger step length. Females had a 10% shorter stance time and 26% larger normalized step and stride length than males. Female participants also walked over 20% faster than male participants. Finally, significant interactions were found in the mean and variability metric of stride velocity, indicating greater variability in women. These findings suggest that sex differences exist in transtibial amputee gait, offering possible explanations for the different comorbidities experienced by female lower limb amputees. These results have major implications for female amputees and for sex-specific research, rehabilitation, and prosthetic design.

Targeting repeatability of a less obtrusive surgical navigation procedure for total shoulder arthroplasty.

PURPOSE: Surgical navigation systems have demonstrated improvements in alignment accuracy in a number of arthroplasty procedures, but they have not yet been widely adopted for use in total shoulder arthroplasty (TSA). We believe this is due in part to the obtrusiveness of conventional optical tracking systems, as well as the need for additional intraoperative steps such as calibration and registration. The purpose of this study is to evaluate the feasibility of adapting a less-intrusive dental navigation system for use in TSA. METHODS: We developed a proof-of-concept system based on validated laser-engraved surgical tools recently introduced for use in dental surgery that are calibrated once when manufactured and not recalibrated at time of use. The design also features a notably smaller bone-mounted tracker that can be tracked from a wide range of viewing angles. To assess our system's performance, we modified the dental surgical software to support guidance of a TSA procedure. We then conducted a user study in which three participants with varying surgical experience used the system to drill 30 holes in a glenoid model. Using a coordinate measuring machine, we determined the resulting drilled trajectory and compared this to the pre-planned trajectory. Since we used a model glenoid rather than anatomical specimens, we report on targeting precision rather than overall procedure precision or accuracy. RESULTS: We found targeting precision < 1 mm (standard deviation) for locating the entry hole and < ~ 1° (SD) for both version and inclination. The latter value was markedly lower than the end-to-end angular precision achieved by previously reported TSA navigation systems (approximately 3°-5° SD). CONCLUSION: We conclude that variability during the targeting phase represents a small fraction of the overall variability exhibited by existing systems, so a less obtrusive navigation system for TSA based on laser-engraved tooling is likely feasible, which could improve the uptake rates of surgical navigation for TSA, thereby potentially leading to improved overall surgical outcomes.

Evaluation of 3D-printer settings for producing personal protective equipment.

Aim: COVID-19 resulted in a shortage of personal protective equipment. Community members united to 3D-print face shield headbands to support local healthcare workers. This study examined factors altering print time and strength. Materials & methods: Combinations of infill density (50%, 100%), shell thickness (0.8, 1.2 mm), line width (0.2 mm, 0.4 mm), and layer height (0.1 mm, 0.2 mm) were evaluated through tensile testing, finite element analysis, and printing time. Results: Strength increased with increased infill (p < 0.001) and shell thickness (p < 0.001). Layer height had no effect on strength. Increasing line width increased strength (p < 0.001). Discussion: Increasing layer height and line width decreased print time by 50 and 39%, respectively. Increased shell thickness did not alter print time. These changes are recommended for printing.

Development and ex-vivo assessment of a novel patient specific guide and instrumentation system for minimally invasive total shoulder arthroplasty.

OBJECTIVE: To develop and assess a novel guidance technique and instrumentation system for minimally invasive short-stemmed total shoulder arthroplasty that will help to reduce the complications associated with traditional open replacement such as poor muscle healing and neurovascular injury. We have answered key questions about the developed system including (1) can novel patient-specific guides be accurately registered and used within a minimally invasive environment?; (2) can accuracy similar to traditional techniques be achieved? METHODS: A novel intra-articular patient-specific guide was developed for use with a new minimally invasive posterior surgical approach that guides bone preparation without requiring muscle resection or joint dislocation. Additionally, a novel set of instruments were developed to enable bone preparation within the minimally invasive environment. The full procedure was evaluated in six cadaveric shoulders, using digitizations to assess accuracy of each step. RESULTS: Patient-specific guide registration accuracy in 3D translation was 2.2±1.2mm (RMSE±1 SD; p = 0.007) for the humeral component and 2.7±0.7mm (p<0.001) for the scapula component. Final implantation accuracy was 2.9±3.0mm (p = 0.066) in translation and 5.7-6.8±2.2-4.0° (0.001

Low-dose CT-based implant motion analysis is a precise tool for early migration measurements of hip cups: a clinical study of 24 patients.

Background and purpose - Early implant migration is known to be a predictive factor of clinical loosening in total hip arthroplasty (THA). Radiostereometric analysis (RSA) is the gold standard used to measure early migration in patients. However, RSA requires costly, specialized imaging equipment and the image process is complex. We determined the precision of an alternative, commercially available, CT method in 3 ongoing clinical THA studies, comprising 3 different cups.Materials and methods - 24 CT double examinations of 24 hip cups were selected consecutively from 3 ongoing prospective studies: 2 primary THA (1 cemented and 1 uncemented) and 1 THA (cemented) revision study. Precision of the CT-based implant motion analysis (CTMA) system was calculated separately for each study, using both the surface anatomy of the pelvis and metal beads placed in the pelvis.Results - For the CTMA analysis using the surface anatomy of the pelvis, the precision ranged between 0.07 and 0.31 mm in translation and 0.20° and 0.39° for rotation, respectively. For the CTMA analysis using beads the precision ranged between 0.08 and 0.20 mm in translation and between 0.20° and 0.43° for rotations. The radiation dose ranged between 0.2 and 2.3 mSv.Interpretation - CTMA achieved a clinically relevant and consistent precision between the 3 different hip cups studied. The use of different hip cup types, different CT scanners, or registration method (beads or surface anatomy) had no discernible effect on precision. Therefore, CTMA without the use of bone markers could potentially be an alternative to RSA to measure early migration.

Accuracy and precision of a CT method for assessing migration in shoulder arthroplasty: an experimental study.

BACKGROUND: Radiostereometric analysis (RSA) is the gold standard to measure early implant migration which is a predictive factor for implant survival. PURPOSE: To validate an alternative computed tomography (CT) technique to measure implant migration in shoulder arthroplasty. MATERIAL AND METHODS: A cadaver proximal humerus and a scapula, which had tantalum beads incorporated within them, were prepared to accept a short-stemmed humeral component and a two-pegged glenoid component of a commercial total shoulder arthroplasty (TSA) system. A five degree of freedom micrometer and goniometer equipped rig was used to translate and rotate the implant components relative to the respective bone to predetermined positions. Double CT examinations were performed for each position and CT motion analysis software (CTMA) was used to assess these movements. The accuracy and precision of the software was estimated using the rig's micrometers and goniometers as the gold standard. The technique's effective dose was also assessed. RESULTS: The accuracy was in the range of 0.07-0.23 mm in translation and 0.22-0.71° in rotation. The precision was in the range of 0.08-0.15 mm in translation and 0.23-0.54° in rotation. The mean effective dose for the CT scans was calculated to be 0.27 mSv. CONCLUSION: In this experimental setting, accuracy, precision, and effective dose of the CTMA technique were found to be comparable to that of RSA. Therefore, we believe clinical studies are warranted to determine if CTMA is a suitable alternative to traditional RSA for migration measurements in TSA.

The effect of humeral polyethylene insert constraint on reverse shoulder arthroplasty biomechanics.

BACKGROUND: There is little information on the effects of altering reverse shoulder arthroplasty (RSA) polyethylene constraint on joint load, load angle and deltoid force. The present biomechanical study aimed to investigate the effects of changing RSA polyethylene constraint on joint load, load angle, deltoid force and range of motion. METHODS: A custom RSA implant capable of measuring forces across the joint with varying polyethylene constraint was tested in six cadaveric shoulders. Standard-, low- and high-constraint (retentive) polyethylene liners were tested, and joint kinematics, loads and muscle forces were recorded. RESULTS: When polyethylene constraint was altered, joint load and load angle during active abduction were not affected significantly (p > 0.19). Additionally, the force required by the deltoid for active abduction was not affected significantly by cup constraint (p = 0.144). Interestingly, active abduction range of motion was also not affected significantly by changes in cup constraint (p > 0.45). CONCLUSIONS: Altering polyethylene cup constraint in RSA to enhance stability does not significantly alter resultant joint loads and deltoid forces. Surprisingly, terminal abduction range of motion was also not significantly different with varying cup constraint, indicating that terminal impingement may be tuberosity related rather than polyethylene.

Spatial mapping of humeral head bone density.

BACKGROUND: Short-stem humeral replacements achieve fixation by anchoring to the metaphyseal trabecular bone. Fixing the implant in high-density bone can provide strong fixation and reduce the risk of loosening. However, there is a lack of data mapping the bone density distribution in the proximal humerus. The aim of the study was to investigate the bone density in proximal humerus. METHODS: Eight computed tomography scans of healthy cadaveric humeri were used to map bone density distribution in the humeral head. The proximal humeral head was divided into 12 slices parallel to the humeral anatomic neck. Each slice was then divided into 4 concentric circles. The slices below the anatomic neck, where short-stem implants have their fixation features, were further divided into radial sectors. The average bone density for each of these regions was calculated, and regions of interest were compared using a repeated-measures analysis of variance with significance set at P < .05. RESULTS: Average apparent bone density was found to decrease from proximal to distal regions, with the majority of higher bone density proximal to the anatomic neck of the humerus (P < .05). Below the anatomic neck, bone density increases from central to peripheral regions, where cortical bone eventually occupies the space (P < .05). In distal slices below the anatomic neck, a higher bone density distribution in the medial calcar region was also observed. CONCLUSION: This study indicates that it is advantageous with respect to implant fixation to preserve some bone above the anatomic neck and epiphyseal plate and to use the denser bone at the periphery.

Effect of Radial Head Implant Shape on Radiocapitellar Joint Congruency.

PURPOSE: Radial head arthroplasty is indicated in displaced fractures in which comminution precludes successful internal fixation. Many types of radial head implants have been developed varying in material, methods of fixation, and degrees of modularity and geometry. The purpose of this study was to investigate the effect of radial head implant shape on radiocapitellar joint congruency. METHODS: Joint congruency was quantified in 7 cadaveric specimens employing a registration and inter-surface distance algorithm and 3-dimensional models obtained using computed tomography. Forearm rotation was simulated after computer-guided implantation of an axisymmetric radial head, a population-based quasi-anatomic radial head implant, and a reverse-engineered anatomic radial head implant. Inter-surface distances were measured to investigate the relative position of the radial head implant and displayed on 3-dimensional color-contour maps. Surface area was measured for inter-surface distances (1.5 mm) and compared for each radial head geometry. RESULTS: There were no statistical differences in the contact surface area between radial head implants during active or passive forearm rotation. The joint was more congruent (larger contact surface area) during active forearm rotation compared with passive forearm rotation. CONCLUSIONS: This study investigated the effect of implant geometry on the radiocapitellar joint contact mechanics by examining a commercially available radial head system (axisymmetric), a quasi-anatomic design, and an anatomic reverse-engineered radial head implant. We found no statistical differences in radiocapitellar joint contact mechanics as measured by 3-dimensional joint congruency in cadaveric specimens undergoing continuous simulated forearm rotation. CLINICAL RELEVANCE: The importance of choosing an implant that matches the general size of the native radial head is recognized, but the degree to which it is necessary to create an implant that replicates the native anatomy to restore elbow stability and prevent cartilage degenerative changes remains unclear. This study concluded that the geometry of the implant did not have a statistically significant effect on joint contact mechanics; therefore, future work is needed to examine additional factors related to implant design, such as material choice and implant positioning to investigate their influence on joint contact mechanics.

The rotator cuff muscles are antagonists after reverse total shoulder arthroplasty.

INTRODUCTION: There is disagreement regarding whether, when possible, the rotator cuff should be repaired in conjunction with reverse total shoulder arthroplasty (RTSA). Therefore, we investigated the effects of rotator cuff repair in RTSA models with varying magnitudes of humeral and glenosphere lateralization. METHODS: Six fresh frozen cadaveric shoulders were tested on a validated in vitro muscle-driven motion simulator. Each specimen was implanted with a custom adjustable, load-sensing RTSA after creation of a simulated rotator cuff tear. The effects of 4 RTSA configurations (0 and 10 mm of humeral lateralization and glenosphere lateralization) on deltoid force and joint load during abduction with and without rotator cuff repair were assessed. RESULTS: Deltoid force was significantly affected by increasing humeral lateralization (-2.5% ± 1.7% body weight [BW], P = .016) and glenosphere lateralization (+7.7% ± 5.6% BW, P = .016). Rotator cuff repair interacted with humeral and glenosphere lateralization (P = .005), such that with no humeral lateralization, glenosphere lateralization increased deltoid force without cuff repair (8.1% ± 5.1% BW, P = .012). This effect was increased with cuff repair (12.8% ± 7.8% BW, P = .010), but the addition of humeral lateralization mitigated this effect. Rotator cuff repair increased joint load (+11.9% ± 5.1% BW, P = .002), as did glenosphere lateralization (+13.3% ± 3.7% BW, P < .001). These interacted, such that increasing glenosphere lateralization markedly increased the negative effects of cuff repair (9.4% ± 3.2% BW [P = .001] vs. 14.4% ± 7.4% BW [P = .005]). CONCLUSION: Rotator cuff repair, especially in conjunction with glenosphere lateralization, produces an antagonistic effect that increases deltoid and joint loading. The long-term effects of this remain unknown; however, combining these factors may prove undesirable. Humeral lateralization improves joint compression through deltoid wrapping and increases the deltoid's mechanical advantage, and therefore, could be used in place of rotator cuff repair, thus avoiding its complications.

A rigid body model for the assessment of glenohumeral joint mechanics: Influence of osseous defects on range of motion and dislocation.

The purpose of this study was to employ subject-specific computer models to evaluate the interaction of glenohumeral range-of-motion and Hill-Sachs humeral head bone defect size on engagement and shoulder dislocation. We hypothesized that the rate of engagement would increase as defect size increased, and that greater shoulder ROM would engage smaller defects. Three dimensional computer models of 12 shoulders were created. For each shoulder, additional models were created with simulated Hill-Sachs defects of varying severities (XS=15%, S=22.5%, M=30%, L=37.5%, XL=45% and XXL=52.5% of the humeral head diameter, respectively). Rotational motion simulations without translation were conducted. The simulations ended if the defect engaged the anterior glenoid rim with resultant dislocation. The results showed that the rate of engagement was significantly different between defect sizes (0.001

Measuring Three-Dimensional Thorax Motion Via Biplane Radiographic Imaging: Technique and Preliminary Results.

Measures of scapulothoracic motion are dependent on accurate imaging of the scapula and thorax. Advanced radiographic techniques can provide accurate measures of scapular motion, but the limited 3D imaging volume of these techniques often precludes measurement of thorax motion. To overcome this, a thorax coordinate system was defined based on the position of rib pairs and then compared to a conventional sternum/spine-based thorax coordinate system. Alignment of the rib-based coordinate system was dependent on the rib pairs used, with the rib3:rib4 pairing aligned to within 4.4 ± 2.1 deg of the conventional thorax coordinate system.

An in vitro study comparing limited to full cementation of polyethylene glenoid components.

BACKGROUND: Glenoid component survival is critical to good long-term outcomes in total shoulder arthroplasty. Optimizing the fixation environment is paramount. The purpose of this study was to compare two glenoid cementing techniques for fixation in total shoulder arthroplasty. METHODS: Sixteen cadaveric specimens were randomized to receive peg-only cementation (CPEG) or full back-side cementation (CBACK). Physiological cyclic loading was performed and implant displacement was recorded using an optical tracking system. The cement mantle was examined with micro-computed tomography before and after cyclic loading. RESULTS: Significantly greater implant displacement away from the inferior portion of the glenoid was observed in the peg cementation group when compared to the fully cemented group during the physiological loading. The displacement was greatest at the beginning of the loading protocol and persisted at a diminished rate during the remainder of the loading protocol. Micro-CT scanning demonstrated that the cement mantle remained intact in both groups and that three specimens in the CBACK group demonstrated microfracturing in one area only. DISCUSSION: Displacement of the CPEG implants away from the inferior subchondral bone may represent a suboptimal condition for long-term implant survival. Cement around the back of the implant is suggested to improve initial stability of all polyethylene glenoid implants. CLINICAL RELEVANCE: Full cementation provides greater implant stability when compared to limited cementation techniques for insertion of glenoid implants. Loading characteristics are more favorable when cement is placed along the entire back of the implant contacting the subchondral bone.

Implant Design Variations in Reverse Total Shoulder Arthroplasty Influence the Required Deltoid Force and Resultant Joint Load.

BACKGROUND: Reverse total shoulder arthroplasty (RTSA) is widely used; however, the effects of RTSA geometric parameters on joint and muscle loading, which strongly influence implant survivorship and long-term function, are not well understood. By investigating these parameters, it should be possible to objectively optimize RTSA design and implantation technique. QUESTIONS/PURPOSES: The purposes of this study were to evaluate the effect of RTSA implant design parameters on (1) the deltoid muscle forces required to produce abduction, and (2) the magnitude of joint load and (3) the loading angle throughout this motion. We also sought to determine how these parameters interacted. METHODS: Seven cadaveric shoulders were tested using a muscle load-driven in vitro simulator to achieve repeatable motions. The effects of three implant parameters-humeral lateralization (0, 5, 10 mm), polyethylene thickness (3, 6, 9 mm), and glenosphere lateralization (0, 5, 10 mm)-were assessed for the three outcomes: deltoid muscle force required to produce abduction, magnitude of joint load, and joint loading angle throughout abduction. RESULTS: Increasing humeral lateralization decreased deltoid forces required for active abduction (0 mm: 68% ± 8% [95% CI, 60%-76% body weight (BW)]; 10 mm: 65% ± 8% [95% CI, 58%-72 % BW]; p = 0.022). Increasing glenosphere lateralization increased deltoid force (0 mm: 61% ± 8% [95% CI, 55%-68% BW]; 10 mm: 70% ± 11% [95% CI, 60%-81% BW]; p = 0.007) and joint loads (0 mm: 53% ± 8% [95% CI, 46%-61% BW]; 10 mm: 70% ± 10% [95% CI, 61%-79% BW]; p < 0.001). Increasing polyethylene cup thickness increased deltoid force (3 mm: 65% ± 8% [95% CI, 56%-73% BW]; 9 mm: 68% ± 8% [95% CI, 61%-75% BW]; p = 0.03) and joint load (3 mm: 60% ± 8% [95% CI, 53%-67% BW]; 9 mm: 64% ± 10% [95% CI, 56%-72% BW]; p = 0.034). CONCLUSIONS: Humeral lateralization was the only parameter that improved joint and muscle loading, whereas glenosphere lateralization resulted in increased loads. Humeral lateralization may be a useful implant parameter in countering some of the negative effects of glenosphere lateralization, but this should not be considered the sole solution for the negative effects of glenosphere lateralization. Overstuffing the articulation with progressively thicker humeral polyethylene inserts produced some adverse effects on deltoid muscle and joint loading. CLINICAL RELEVANCE: This systematic evaluation has determined that glenosphere lateralization produces marked negative effects on loading outcomes; however, the importance of avoiding scapular notching may outweigh these effects. Humeral lateralization's ability to decrease the effects of glenosphere lateralization was promising but further investigations are required to determine the effects of combined lateralization on functional outcomes including range of motion.

Estimating Glenoid Width for Instability-Related Bone Loss: A CT Evaluation of an MRI Formula.

BACKGROUND: Determining the magnitude of glenoid bone loss in cases of shoulder instability is an important step in selecting the optimal reconstructive procedure. Recently, a formula has been proposed that estimates native glenoid width based on magnetic resonance imaging (MRI) measurements of height (1/3 × glenoid height + 15 mm). This technique, however, has not been validated for use with computed tomography (CT), which is often the preferred imaging modality to assess bone deficiencies. PURPOSE: The purpose of this project was 2-fold: (1) to determine if the MRI-based formula that predicts glenoid width from height is valid with CT and (2) to determine if a more accurate regression can be resolved for use specifically with CT data. STUDY DESIGN: Descriptive laboratory study. METHODS: Ninety normal shoulder CT scans with preserved osseous anatomy were drawn from an existing database and analyzed. Measurements of glenoid height and width were performed by 2 observers on reconstructed 3-dimensional models. After assessment of reliability, the data were correlated, and regression models were created for male and female shoulders. The accuracy of the MRI-based model's predictions was then compared with that of the CT-based models. RESULTS: Intra- and interrater reliabilities were good to excellent for height and width, with intraclass correlation coefficients of 0.765 to 0.992. The height and width values had a strong correlation of 0.900 (P < .001). Regression analyses for male and female shoulders produced CT-specific formulas: for men, glenoid width = 2/3 × glenoid height + 5 mm; for women, glenoid width = 2/3 × glenoid height + 3 mm. Comparison of predictions from the MRI- and CT-specific formulas demonstrated good agreement (intraclass correlation coefficient = 0.818). The CT-specific formulas produced a root mean squared error of 1.2 mm, whereas application of the MRI-specific formula to CT images resulted in a root mean squared error of 1.5 mm. CONCLUSION: Use of the MRI-based formula on CT scans to predict glenoid width produced estimates that were nearly as accurate as the CT-specific formulas. The CT-specific formulas, however, are more accurate at predicting native glenoid width when applied to CT data. CLINICAL RELEVANCE: Imaging-specific (CT and MRI) formulas have been developed to estimate glenoid bone loss in patients with instability. The CT-specific formula can accurately predict native glenoid width, having an error of only 2.2% of average glenoid width.

The effect of radial head implant shape on radiocapitellar kinematics during in vitro forearm rotation.

BACKGROUND: A number of radial head implants are in clinical use for the management of radial head fractures and their sequelae. However, the optimal shape of a radial head implant to ensure proper tracking relative to the capitellum has not been established. This in vitro biomechanical study compared radiocapitellar joint kinematics for 3 radial head implant designs as well as the native head. METHODS: Eight cadaveric upper extremities were tested using a forearm rotation simulator with the elbow at 90° of flexion. Motion of the radius relative to the capitellum was optically tracked. A stem was navigated into a predetermined location and cemented in place. Three unipolar implant shapes were tested: axisymmetric, reverse-engineered patient-specific, and population-based quasi-anatomic. The patient-specific and quasi-anatomic implants were derived from measurements performed on computed tomography models. RESULTS: Medial-lateral and anterior-posterior translation of the radial head with respect to the capitellum varied with forearm rotation and radial head condition. A significant difference in medial-lateral (P = .03) and anterior-posterior (P = .03) translation was found between the native radial head and the 3 implants. No differences were observed among the radial head conditions except for a difference in medial-lateral translation between the axisymmetric and patient-specific implants (P = .04). CONCLUSIONS: Radiocapitellar kinematics of the tested radial head implants were similar in all but one comparison, and all had different kinematics from the native radial head. Patient-specific radial head implants did not prove advantageous relative to conventional implant designs. The shape of the fixed stem unipolar radial head implants had little influence on radiocapitellar kinematics when optimally positioned in this testing model.

The effect of glenosphere diameter in reverse shoulder arthroplasty on muscle force, joint load, and range of motion.

BACKGROUND: Little is known about the effects of glenosphere diameter on shoulder joint loads. The purpose of this biomechanical study was to investigate the effects of glenosphere diameter on joint load, load angle, and total deltoid force required for active abduction and range of motion in internal/external rotation and abduction. METHODS: A custom, instrumented reverse shoulder arthroplasty implant system capable of measuring joint load and varying glenosphere diameter (38 and 42 mm) and glenoid offset (neutral and lateral) was implanted in 6 cadaveric shoulders to provide at least 80% power for all variables. A shoulder motion simulator was used to produce active glenohumeral and scapulothoracic motion. All implant configurations were tested with active and passive motion with joint kinematics, loads, and moments recorded. RESULTS: At neutral and lateralized glenosphere positions, increasing diameter significantly increased joint load (+12 ± 21 N and +6 ± 9 N; P < .01) and deltoid load required for active abduction (+9 ± 22 N and +11 ± 15 N; P < .02), whereas joint load angle was unaffected (P > .8). Passive internal rotation was reduced with increased diameter at both neutral and lateralized glenosphere positions (-6° ± 6° and -12° ± 6°; P < .002); however, external rotation was not affected (P > .05). At neutral glenosphere position, increasing diameter increased the maximum angles of both adduction (+1° ± 1°; P = .03) and abduction (+8° ± 9°; P < .05). Lateralization also increased abduction range of motion compared with neutral (P < .01). CONCLUSIONS: Although increasing glenosphere diameter significantly increased joint load and deltoid force, the clinical impact of these changes is presently unclear. Internal rotation, however, was reduced, which contradicts previous bone modeling studies, which we postulate is due to increased posterior capsular tension as it is forced to wrap around a larger 42 mm implant assembly.