RESUMO
This review describes recent advances and current trends in fire debris analysis from 2014 to 2021. Onsite analytical techniques used for fire scene investigation, identifying samples of interest for later analysis as well as onsite confirmatory techniques are examined. Laboratory techniques are reviewed both from a perspective of instrumentation and data analysis. Advances in analytical techniques include GC x GC-TOFMS, DART-MS, HS-GC-IMS. New and emerging methods of data analysis including those using machine learning are assessed. Each aspect is essential for forensic scientists to obtain the correct conclusion when collecting, examining, analysing, and interpreting fire debris. This review concludes that there is a need for the validity and certainty of all methods to be assessed if they are to be used to generate reports or draw conclusions.
RESUMO
The sourcing of novel bioactive compounds from bioresources has become a sustainability priority for several industrial sectors. Reliable methods are hence needed for the screening and identification of desired molecules in complex extracts. As such, phenolic compounds have attracted increasing interests due to their antioxidant potential. Here, a HPLC-UV based method was developed for the determination of phenolic compounds using a monolithic column. This allowed the separation of 23 phenolic compounds within 11 min. The method was ground proofed in terms of chromatographic parameters and applied to identify polyphenols in extracts of blueberries, basil and marine microalgae. The dominant polyphenols in blueberries and basil were chlorogenic acid (26.0 mg. kg -1) and kaempferol (61.4 mg. kg -1), respectively, while the microalgae used only contained trace amounts of polyphenols. This study demonstrates the value of our new HPLC method to rapidly screen extracts and identify polyphenols from biological matrices.
Assuntos
Fenóis , Polifenóis , Cromatografia Líquida de Alta Pressão , Ácido Clorogênico , Extratos VegetaisRESUMO
There has been increasing demands worldwide for bioactive compounds of natural origins, especially for the nutraceutical and food-supplement sectors. In this context, microalgae are viewed as sustainable sources of molecules with an array of health benefits. For instance, astaxanthin is a xanthophyll pigment with powerful antioxidant capacity produced by microalgae such as the chlorophyte Haematococcus sp., which is regarded as the most suitable organism for the mass production of this pigment. In this study, three Haematococcus sp. strains were cultivated using a batch mode under favourable conditions to promote vegetative growth. Their environment was altered in a second phase using a higher and constant illumination regime combined with either exposure to blue LED light, an osmotic shock (with NaCl addition) or supplementation with a phytohormone (gibberellic acid, GA3), a plant extract (ginger), an herbicide (molinate) or an oxidant reagent (hydrogen peroxide). The effects of these stressors were evaluated in terms of antioxidant response and astaxanthin and ß-carotene accumulation. Overall, strain CCAP 34/7 returned the highest Trolox Equivalent Antioxidant Capacity (TEAC) response (14.1-49.1 µmoL Trolox eq. g- 1 of DW), while the highest antioxidant response with the Folin-Ciocalteu (FC) was obtained for strain RPFW01 (62.5-155 µmoL Trolox eq. g- 1 of DW). The highest ß-ß-carotene content was found in strain LAFW15 when supplemented with the ginger extract (4.8 mg. g- 1). Strain RPFW01 exposed to blue light returned the highest astaxanthin yield (2.8 mg. g- 1), 5-fold that of strain CCAP 34/7 on average. This study documents the importance of screening several strains when prospecting for species with potential to produce high-value metabolites. It highlights that strain-specific responses can ensue from exposure of cells to a variety of stressors, which is important for the adequate tailoring of a biorefinery pipeline.
Assuntos
Clorofíceas , Clorófitas , Herbicidas , Microalgas , Antioxidantes/metabolismo , Antioxidantes/farmacologia , Carotenoides/metabolismo , Clorofíceas/metabolismo , Peróxido de Hidrogênio , Microalgas/metabolismo , Oxidantes/metabolismo , Extratos Vegetais/metabolismo , Reguladores de Crescimento de Plantas/metabolismo , Cloreto de Sódio , Xantofilas/metabolismo , beta Caroteno/metabolismoRESUMO
There has been an increasing drive toward better valorising raw biological materials in the context of the sustainability of bio-based industries and the circular economy. As such, microalgae hold the ability to biosynthesise valuable metabolites, which are sought after within the bioenergy, pharmaceuticals, cosmetics or nutrition sectors. Owing to their bioactivities, the xanthophyll pigment fucoxanthin and the omega-3 polyunsaturated fatty acid eicosapentaenoic acid (EPA) have fostered increasing interests in terms of sustainably refining them from natural sources, such as microalgae. Together with the suitability of individual species to industrial cultivation, a key challenge resides in optimizing the yields of these compounds within the microalgal biomass they are retrieved from. The marine diatom Stauroneis sp. LACW24 was batch cultivated into its stationary phase of growth prior to being subjected at high cell density (1 × 106 cells mL-1 ) to seven different regimes of light exposure in replenished medium and under nutritional limitation (silica and nitrate) for 12 days. The highest EPA proportions and yields were obtained under blue LED in f/2 medium (16.5% and 4.8 mg g-1 , respectively), double the values obtained under red LED illumination. The fucoxanthin yield was the highest when cells were subjected to blue LEDs (5.9 mg g-1 ), a fourfold increase compared to the nitrogen-limited treatment under white LEDs. These results indicate that a two-stage approach to the batch cultivation of this diatom can be used for enhancing the production of the high-value metabolites fucoxanthin and EPA post-stationary phase.
Assuntos
Técnicas de Cultura de Células/métodos , Diatomáceas , Ácido Eicosapentaenoico/metabolismo , Xantofilas/metabolismo , Diatomáceas/metabolismo , Diatomáceas/efeitos da radiaçãoRESUMO
Microalgae constitute a heterogeneous and diverse range of organisms capable of accumulating bioactive metabolites, making them promising feedstock for applications in the nutraceutical, functional food, animal feed, biofertilisation or biofuel sectors. There has been renewed interest in recent times in natural sources of antioxidants, particularly as health products and preserving agents. Microalgae strains isolated from aquatic habitats in Ireland were successfully brought into culture. The 91 strains were grown phototrophically in nutrient-enriched media to generate biomass, which was harvested and assessed for antioxidant potential. Extracts were screened for antioxidant activity using a modified volumetric Trolox-ABTS assay and the Folin-Ciocalteu method. Two heterokont marine strains of interest were further studied to ascertain variations in antioxidant capacity across different stages of batch culture growth. The antioxidant activity of extracts of bacillariophyte cf. Stauroneis sp. LACW24 and ocrophyte cf. Phaeothamnion sp. LACW34 increased during growth with a maximum being observed during the late stationary or early death phase (2.5- to 8-fold increases between days 20 and 27). Strains LACW24 and LACW34 contained 5.9 and 3.0 mg g-1 (DW) of the xanthophyll fucoxanthin, respectively. Extracts of strains also showed no cytotoxicity towards mouse cell lines. These results highlight the potential of these strains for biomass valorisation and cultivation upscaling and to be further considered as part of ongoing bioprospecting efforts towards identifying novel species to join the relatively narrow range of commercially exploited marine microalgae species.
Assuntos
Antioxidantes/metabolismo , Biomassa , Bioprospecção , Microalgas/crescimento & desenvolvimento , Estramenópilas/crescimento & desenvolvimento , Microbiologia da ÁguaRESUMO
Tailoring spectral quality during microalgal cultivation can provide a means to increase productivity and enhance biomass composition for downstream biorefinery. Five microalgae strains from three distinct lineages were cultivated under varying spectral intensities and qualities to establish their effects on pigments and carbon allocation. Light intensity significantly impacted pigment yields and carbon allocation in all strains, while the effects of spectral quality were mostly species-specific. High light conditions induced chlorophyll photoacclimation and resulted in an increase in xanthophyll cycle pigments in three of the five strains. High-intensity blue LEDs increased zeaxanthin tenfold in Rhodella sp. APOT_15 relative to medium or low light conditions. White light however was optimal for phycobiliprotein content (11.2 mg mL-1) for all tested light intensities in this strain. The highest xanthophyll pigment yields for the Chlorophyceae were associated with medium-intensity blue and green lights for Brachiomonas submarina APSW_11 (5.6 mg g-1 lutein and 2.0 mg g-1 zeaxanthin) and Kirchneriella aperta DMGFW_21 (1.5 mg g-1 lutein and 1 mg g-1 zeaxanthin), respectively. The highest fucoxanthin content in both Heterokontophyceae strains (2.0 mg g-1) was associated with medium and high white light for Stauroneis sp. LACW_24 and Phaeothamnion sp. LACW_34, respectively. This research provides insights into the application of LEDs to influence microalgal physiology, highlighting the roles of low light on lipid metabolism in Rhodella sp. APOT_15, of blue and green lights for carotenogenesis in Chlorophyceae and red light-induced photoacclimation in diatoms.
Assuntos
Aclimatação/efeitos da radiação , Carbono/metabolismo , Luz , Microalgas/metabolismo , Microalgas/efeitos da radiação , Pigmentos Biológicos/metabolismo , Clorofíceas/metabolismo , Clorofila A/metabolismo , Microalgas/crescimento & desenvolvimento , Ficobiliproteínas/metabolismo , Rodófitas/crescimento & desenvolvimento , Rodófitas/metabolismo , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Polymeric monoliths in capillary formats have been fabricated incorporating a gradient of charged functional groups along their length. Scanning capacitively coupled contactless conductivity detection (sC(4)D) was then used to measure the conductive response of the stationary phase and characterise the relative axial distribution of functional groups along the column length. Gradients of 2-acrylamido-2-methyl-1-propanesulphonic acid were prepared using either photografting methods or by filling a capillary column with segmented plugs of monomer mixtures each containing incrementally higher concentrations of the functional monomer. The utility of sC(4)D as a rapid and non-invasive tool for assessing the slope of a variety of gradient configurations is demonstrated. Repeatability of the sC(4)D measurements was <1.7% RSD. Columns with a gradient of covalently bonded iminodiacetic acid were also produced. Changes in the gradient slope were observed after chelation of copper on the stationary phase via a reduction of the conductive response. The effect upon the observed gradient profile of changing the co-monomer composition during column fabrication was studied.
RESUMO
The application of scanning capacitively coupled contactless conductivity detection (SC(4)D) for the determination of pH dependant behaviour of two aminopolycarboxylates immobilised onto the surface of a monolithic capillary column is described. The use of SC(4)D to visualise changes in conductivity of the discrete zones of functional groups within monolithic capillary columns allows for the effects of immobilisation on the physicochemical properties of zones to be compared to that of the functional group in solution. The perturbation of the pK(a) values of the functional groups can be attributed to the change in chemical environment experienced by the functional group through the presence of local hydrogen bonding and surface induced effects. These bonds, both between adjacent functional groups and with the monolithic polymethacrylate scaffold, result in a modification of the electron density on the functional group and therefore a change in pK(a). Changes in the pK(a) of N-(2-acetamido)iminodiacetic acid (ADA) from 2.48 to 5.2 for one of the acidic protons, with little change in the pK(a) of the amine group, were observed, which correlates to similar changes in aggregated systems of aminopolycarboxylates. Similar results were obtained for the iminodiacetic acid (IDA) once immobilised onto the surface of the monolith. Furthermore, the ability to measure changes in the charge of such discrete zones of functional groups allows for the visualisation of complexation events occurring directly on-column, where such complexes result in a change in charge of the functional group. This potentially useful technique is illustrated within for the formation of aminopolycarboxylate complexes with a selection of metal ions.
Assuntos
Ácidos Carboxílicos/química , Cromatografia/instrumentação , Metais/química , Cromatografia/métodos , Eletroquímica/instrumentação , Eletroquímica/métodos , Concentração de Íons de Hidrogênio , Iminoácidos/química , Estrutura Molecular , Compostos Orgânicos/químicaRESUMO
Capacitively coupled contactless conductivity detection (C4D) is utilised as a simple, rapid and non-invasive technique for the quantitative evaluation of the ion-exchange capacity of charged polymer monoliths in capillary format. A charged monomer, 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) was photografted onto a 100 microm i.d. butyl methacrylate-co-ethylenedimethacrylate monolith in a number of discrete 10 mm zones. By varying the energy dose (J/cm2) during grafting of each zone, the grafting density and thus ion-exchange capacity could be precisely controlled. Ion-exchange capacity could be correlated with energy dose by measuring the conductive response of each grafted region using scanning C4D techniques. Repeatability of the scanning C4D method was excellent with % RSD values of 0.7% and 2.4% obtained for three replicate scans of the ungrafted and grafted regions of a single monolith, respectively. Repeatability of the photografting process on separate monoliths was also examined by comparison of C4D profiles. The spatial accuracy of photografting was probed using scanning C4D which could measure the conductive response of the monolith at measurement intervals as low as 1 mm along its entire length. Scanning C4D was also used for the real time visualisation of the equilibration of grafted zones to permit the optimisation of monolith washing procedures. Finally, scanning C4D was applied to the measurement of the ion-exchange capacity of butyl methacrylate-co-AMPS-co-ethylenedimethacrylate copolymers with a direct correlation between monolith conductive response and concentration of charged monomer in the polymerisation mixture. The longitudinal homogeneity of charge along the monolith was 0.3% RSD, demonstrating that the charged functional monomer was evenly dispersed throughout the bulk of the monolith. Ion-exchange capacity was cross validated chromatographically using breakthrough studies and found to closely correlate to within 1% of the measurements made by scanning C4D.
Assuntos
Condutividade Elétrica , Polímeros/química , Acrilamidas/química , Monofosfato de Adenosina/análogos & derivados , Monofosfato de Adenosina/química , Alcanossulfonatos/química , Metacrilatos/química , Reprodutibilidade dos Testes , Tionucleotídeos/químicaRESUMO
A capacitively coupled contactless conductivity detector cell was designed and constructed suitable for standard HPLC 1.6 mm o.d. (1/16'') tubing and columns. Bode plots were acquired in order to determine the optimum input frequency for the new detector cell, with three feedback resistors of increasing resistance (1 MOmega, 3.3 MOmega and 4.7 MOmega) alternately fitted to maximize sensitivity. To evaluate the new detector geometry, a 190 mm x 0.381 mm i.d. (1.59 mm o.d.) column packed with Dionex OmniPac 8.5 microm PAX-100 anion exchange resin was used, with an eluent of 0.5 mM sodium benzoate containing 2% methanol, pumped at 20 microL min(-1), with detection taking place 'on-column'. Standard analytical performance criteria were used to compare the test detector with a commercially available TraceDec C(4)D capillary (360 microm o.d.) detector, with the new detector cell matching the performance of the commercial instrument in terms of linearity, sensitivity and reproducibility. In 'on-column' detection mode, the detector cell could be moved during (or between) chromatographic runs along the length of the packed column bed, to shorten the effective length of the column and thus reduce the retention time of strongly retained sample components, whilst maintaining the resolution of weakly retained components. In addition, the detector could also be applied to the evaluation of the stationary phase packing homogeneity by physically scanning the entire length of the micro-bore column with the moveable detector cell.
Assuntos
Cromatografia por Troca Iônica/métodos , Eletroforese Capilar/instrumentação , Cromatografia Líquida de Alta Pressão/instrumentação , Eletroforese Capilar/métodos , Desenho de EquipamentoRESUMO
The use of on-column capacitively coupled contactless conductivity detection for the accurate non-invasive visualisation of the pH dependence of covalently bound boronic acid groups within a monolithic polymeric capillary column is demonstrated.
Assuntos
Eletroforese Capilar/métodos , Troca Iônica , Ácidos Borônicos/química , Condutividade Elétrica , EletroquímicaRESUMO
A reversed-phase monolithic silica based capillary column (Onyx C(18), 150 mm x 0.1 mm) was modified with the amphoteric surfactant, N-dodecyl-N,N-(dimethylammonio)undecanoate (DDMAU) and evaluated for the separation and determination of inorganic anions using on-column capacitively coupled contactless conductivity detection (C(4)D). The chromatographic performance of the column was evaluated and under optimal conditions separation efficiencies of 56,200 plates per meter or 7025 plates per column (at detection point) were observed (for iodide). Direct plumbing of the capillary column to the micro-injector and on-column detection eliminated extra-column band broadening, thus allowing accurate analysis of van Deemter curves obtained for the monolithic capillary column. The calculated value for the C-term in the obtained van Deemter curve was between 3 and 4 ms for inorganic anions, allowing for the utilisation of relatively high flow rates without significant losses in efficiency. The performance of the C(4)D detector was investigated and compared for detection on an open tubular capillary column and on the modified monolithic silica capillary column. The on-column detection approach did not result in any significant decrease in peak sensitivity for the monolith compared to responses recorded for open tubular capillary columns, and in addition meant the system could be applied to rapid separations by simple variation in apparent column length. The proposed chromatographic system allowed for detection of common anions at sub-ppm level with a 10 nL injection volume. Additionally, on-column detection allowed visualisation of the development of the separation at any point in time and evaluation of the longitudinal uniformity of the ion-exchange coating.
Assuntos
Ânions/isolamento & purificação , Cromatografia Líquida/métodos , Dióxido de Silício/química , Tensoativos/química , EletroquímicaRESUMO
A capacitively-coupled contactless conductivity detector (C4D) has been utilised as an on-capillary detector within a capillary ion chromatograph, incorporating a reversed-phase monolithic silica capillary column semi-permanently modified with a suitable ionic surfactant. The monolithic capillary column (150 x 0.1 mm i.d.) was modified using sodium dioctyl sulfosuccinate (DOSS), an anionic surfactant, for the separation of small inorganic and organic cations. With the use of the on-capillary conductivity detector, the longitudinal homogeneity and temporal stability of the coating were investigated. The approach allowed a detailed non-invasive observation of the nature of the ion-exchange coating over time, and an example of an application of the technique to produce a longitudinal stationary-phase charge gradient is shown. An investigation of the basis of the measured on-capillary conductivity was carried out with a counter ion study, clearly showing the on-capillary detection technique could also distinguish between chemical forms of the immobilised ion exchanger. The above method was used to produce a stable and homogeneously-modified monolithic ion-exchange capillary column, for application to the separation of inorganic alkaline earth cations and amino acids.
Assuntos
Cromatografia por Troca Iônica/métodos , Aminoácidos/análise , Cromatografia por Troca Iônica/instrumentação , Ácido Dioctil Sulfossuccínico , Condutividade Elétrica , Dióxido de Silício , TensoativosRESUMO
The use of radial (across) capillary column capacitively coupled contactless conductivity detection is demonstrated as a simple and rapid technique for visualisation of stationary phase longitudinal coverage and coating stability in capillary ion exchange chromatography.