Separation of Pd from Pt and Rh by solvent extraction method from waste solution.

The paper investigated the possibility of extractive separation of palladium from platinum and rhodium with ionic liquid Cyphos IL 101. A technological solution obtained by dissolving waste materials was used as the test material. Based on the experiments performed, it was found that a 10% (v/v) solution of the Cyphos IL 101 ionic liquid in toluene allows the extraction of both Pd and Pt with an efficiency of 99% from the initial solution when extraction is carried out at the pH 0.5, vorg:vaq phase ratio 1:1 and contact time of 15 min. Moreover, the research proved that it is possible to separate Pd from Pt at the stripping stage using a 0.1 mol/dm3 thiourea solution while maintaining a high selectivity coefficient.

Application of ion-exchange dynamic conditions in the recovery of precious metals from refining waste.

The objective of this study was to assess the potential for recovering precious metals from technological solutions using an ion-exchange dynamic method. Precious metals like platinum, palladium, rhodium, and gold are essential materials in various industries such as: automotive, electronics, pharmaceuticals, and jewellery. Due to their limited occurrence in primary sources, there is a growing trend in the market to extract these metals from secondary sources. The research involved conducting sorption and elution tests under different parameters to investigate their impact on the process in dynamic conditions. Additionally, an attempt was made to calculate the operational and total capacity of the resins, which has not been done previously for industrial solutions. The results showed that using Puromet MTS9200, Puromet MTS9850, and Lewatit MonoPlus MP600 resins, the sorption process could be effectively carried out in dynamic conditions with a contact time of 5 min between the technological solution and the resin bed. For optimal elution, the contact time between the eluent solution and the bed should range between 10 and 30 min. To improve rhodium sorption efficiency, it was found that neutralizing the technological solution to a pH of approximately 7 and using Lewatit MonoPlus MP600 resin could be beneficial.

Solvent Extraction as a Method of Recovery and Separation of Platinum Group Metals.

Platinum group metals (PGMs) are a group of six metals with high market value and key importance to many industrial sectors. Due to their low prevalence in the Earth's crust and high demand, these metals have been recognized as critical materials for many years. Along with economic development, the natural resources of the platinum group metals are gradually depleting, which is accompanied by the need to recover PGMs from secondary sources. The solutions resulting from the processing of such materials are characterized by high content of impurities and low content of precious metals. For this reason, in order to obtain pure metals, it is extremely important to choose an effective, selective method for the recovery and separation of the platinum group metals. This review focuses on the most important aspects of the characteristics of the PGMs, including their properties and occurrence, the processing of natural and secondary raw materials and the role of liquid-liquid extraction in the selective separation of metals from this group, not only on a laboratory scale but, above all, on an industrial scale. In addition, this study collects information on the most commonly used, commercially available extractants, based on current reports, taken from the scientific literature.