Rapid catalytic reduction of environmentally toxic azo dye pollutant by Prussian blue analogue nanocatalyst.

The release of toxic azo dyes pollutants in the environment from different industries represents a public health concern and a serious environmental problem. Therefore, the conversion of hazardous methyl orange (MO) azo dye to environmentally benign products is a critical demand. In this work, an eco-friendly Prussian blue analogue (PBA) was synthesized and its catalytic activity toward the reduction of MO was investigated. The PBA copper(ii) hexacyanocobaltate(III) (Cu3[Co(CN)6]2) was synthesized by a facile inexpensive chemical coprecipitation method without using hazardous solvents. The nanocatalyst was characterized using XPS, Raman, FTIR spectroscopy, and XRD. The chemical reduction of MO using NaBH4 and the PBA as nanocatalyst was monitored by UV-VIS spectroscopy. Toxic MO was completely reduced in 105 s with a rate constant (k) 0.0386 s-1 using only 10 µg of the PBA nanocatalyst. Besides the powerful catalytic activity, the nanocatalyst also showed excellent stability and recyclability for ten consecutive cycles, with no significant decrease in the catalytic performance. Therefore, the proposed PBA is a promising, stable, cost-effective, and eco-friendly nanocatalyst for the rapid elimination of hazardous azo dyes.

Synthesis of Sb2S3 nanosphere layer by chemical bath deposition for the photocatalytic degradation of methylene blue dye.

An antimony tri-sulfide Sb2S3 nanosphere photocatalyst was effectively deposited utilizing sodium thiosulfate and antimony chloride as the starting precursors in a chemical bath deposition process. This approach is appropriate for the large-area depositions of Sb2S3 at low deposition temperatures without the sulfurization process since it is based on the hydrolytic decomposition of starting compounds in aqueous solution. X-ray diffraction patterns and Raman spectroscopy analysis revealed the formation of amorphous Sb2S3 layers. The scanning electron microscopy images revealed that the deposited Sb2S3 has integrated small nanospheres into sub-microspheres with a significant surface area, resulting in increased photocatalytic activity. The optical direct bandgap of the Sb2S3 layer was estimated to be about 2.53 eV, making amorphous Sb2S3 appropriate for the photodegradation of organic pollutants in the presence of solar light. The possibility of using the prepared Sb2S3 layer in the photodegradation of methylene blue aqueous solutions was investigated. The degradation of methylene blue dye was performed to evaluate the photocatalytic property of Sb2S3 under visible light. The amorphous Sb2S3 exhibited photocatalytic activity for the decolorization of methylene blue solution under visible light. The mechanism for the photocatalytic degradation of methylene blue has been proposed. Our results suggest that the amorphous Sb2S3 nanospheres are valuable material for addressing environmental remediation issues.

Point-of-care diagnostics for rapid determination of prostate cancer biomarker sarcosine: application of disposable potentiometric sensor based on oxide-conductive polymer nanocomposite.

One of the most important reasons for an increased mortality rate of cancer is late diagnosis. Point-of-care (POC) diagnostic sensors can provide rapid and cost-effective diagnosis and monitoring of cancer biomarkers. Portable, disposable, and sensitive sarcosine solid-contact ion-selective potentiometric sensors (SC-ISEs) were fabricated as POC analyzers for the rapid determination of the prostate cancer biomarker sarcosine. Tungsten trioxide nanoparticles (WO3 NPs), polyaniline nanoparticles (PANI NPs), and PANI-WO3 nanocomposite were used as ion-to-electron transducers on screen-printed sensors. WO3 NPs and PANI-WO3 nanocomposite have not been investigated before as ion-to-electron transducer layers in potentiometric SC sensors. The designated sensors were characterized using SEM, XRD, FTIR, UV-VIS spectroscopy, and EIS. The inclusion of WO3 and PANI in SC sensors enhanced the transduction at the interface between the screen-printed SC and the ion-selective membrane, offering lower potential drift, a longer lifetime, shorter response time, and better sensitivity. The proposed sarcosine sensors exhibited Nernstian slopes over linear response ranges 10-3-10-7 M, 10-3-10-8 M, 10-5-10-9 M, and 10-7-10-12 M for control, WO3 NPs, PANI NPs, and PANI-WO3 nanocomposite-based sensors, respectively. From a comparative point of view between the four sensors, PANI-WO3 nanocomposite inclusion offered the lowest potential drift (0.5 mV h-1), the longest lifetime (4 months), and the best LOD (9.95 × 10-13 M). The proposed sensors were successfully applied to determine sarcosine as a potential prostate cancer biomarker in urine without prior sample treatment steps. The WHO ASSURED criteria for point-of-care diagnostics are met by the proposed sensors.

Detection of exosomal miR-18a and miR-222 levels in Egyptian patients with hepatic cirrhosis and hepatocellular carcinoma.

BACKGROUND: Hepatocellular carcinoma (HCC) is known to be the second leading cause of cancer-related mortality worldwide. For improving the prognosis as well as reducing the rate of mortality, early diagnosis of HCC is a must. AIMS: This study was conducted to assess the ability of the serum expression of exosomal miR-18a and miR-222 to differentiate and diagnose patients with HCC, patients with liver cirrhosis, and healthy controls. METHODS: This study included 51 patients with liver cirrhosis, 51 patients with HCC on top of hepatitis C virus (HCV) infection, and 50 healthy controls. RESULTS: miR-18a and miR-222 were assessed using reverse transcription-polymerase chain reaction. MiR-18a and miR-222 levels were significantly higher in the liver cirrhosis and HCC groups than the control group (p ˂ 0.001). However, no statistically significant difference was found between patients with HCC and liver cirrhosis (p = 0.4 for miR-18a and p = 0.1 for miR-222). ROC curve analyses to evaluate the diagnostic performances of the two miRNAs as important noninvasive diagnostic markers revealed a best cutoff value of 2 for miR-18a to differentiate between liver cirrhosis, HCC, and healthy controls. And for mir-222, a cutoff value of 1.7 and 1.9 showed the highest specificity for discrimination between liver cirrhosis, HCC, and healthy controls, respectively. Moreover, logistic regression model revealed that miR-18a expression was independent predictive factor in HCC patients (p = 0.004), while miR-222 expression was independent predictive factor in liver cirrhosis patients (p < 0.001). CONCLUSION: miR-18a and miR-222 were significantly discriminative markers between patients with liver cirrhosis and HCC and healthy individuals. Therefore, they have a prognostic rather than a diagnostic value. Moreover, miR-18a and miR-222 could be useful in identifying liver injuries, including fibrosis and cirrhosis.

A facile chemical synthesis of nanoflake NiS2 layers and their photocatalytic activity.

A single-phase and crystalline NiS2 nanoflake layer was produced by a facile and novel approach consisting of a two-step growth process. First, a Ni(OH)2 layer was synthesized by a chemical bath deposition approach using a nickel precursor and ammonia as the starting solution. In a second step, the obtained Ni(OH)2 layer was transformed into a NiS2 layer by a sulfurization process at 450 °C for 1 h. The XRD analysis showed a single-phase NiS2 layer with no additional peaks related to any secondary phases. Raman and X-ray photoelectron spectroscopy further confirmed the formation of a single-phase NiS2 layer. SEM revealed that the NiS2 layer consisted of overlapping nanoflakes. The optical bandgap of the NiS2 layer was evaluated with the Kubelka-Munk function from the diffuse reflectance spectrum (DRS) and was estimated to be around 1.19 eV, making NiS2 suitable for the photodegradation of organic pollutants under solar light. The NiS2 nanoflake layer showed photocatalytic activity for the degradation of phenol under solar irradiation at natural pH 6. The NiS2 nanoflake layer exhibited good solar light photocatalytic activity in the photodegradation of phenol as a model organic pollutant.

Obesity: a risk factor for acute myocardial infarction with angiographically patent epicardial coronary vessels in an adolescent.

OBJECTIVE: Toreport a causal relationship between myocardial infarction (MI) and obesity in an adolescent in the absence of the well-known risk factors for MI. CASE PRESENTATION AND INTERVENTION: A morbidly obese 17-year-old male, a nonsmoker, nondiabetic and normotensive patient, who sustained acute inferior MI with no family history of coronary artery disease, presented with central chest pain. ECG showed low voltage, normal sinus rhythm and ST segment elevation in the inferior leads; cardiac enzymes were elevated. Screening for ethanol and cocaine were negative. He was admitted to the coronary-care unit as a case of inferior MI with late presentation. Cardiac catheterization revealed patent epicardial coronary arteries; short- and long-term plans for weight reduction and family counseling were started. The hospital stay was uneventful, and the patient was discharged home on the fourth day. CONCLUSION: Based on clinical and laboratory findings, we assume that the MI might partly be secondary to coronary artery spasm or invisible premature atherosclerotic plaques. Public education and awareness for this complication in a young obese patient are warranted.