RESUMO
The control of spin relaxation mechanisms is of great importance for spintronics applications as well as for fundamental studies. Layered metal-halide perovskites represent an emerging class of semiconductors with rich optical spin physics, showing potential for spintronic applications. However, a major hurdle arises in layered metal-halide perovskites with strong spin-orbit coupling, where the spin lifetime becomes extremely short due to D'yakonov-Perel' scattering and Bir-Aronov-Pikus at high carrier density. Using the circularly polarized pump-probe transient reflection technique, we experimentally reveal the important scattering for spin relaxation beyond the electron-hole exchange strength in the Dion-Jacobson (DJ)-type 2D perovskites (3AMP)(MA)n-1PbnI3n+1 [3AMP = 3-(aminomethyl)piperidinium, n = 1-4]. Despite a more than 10-fold increase in carrier concentration, the spin lifetimes for n = 3 and 4 are effectively maintained. We reveal neutral impurity and polar optical phonon scatterings as significant contributors to the momentum relaxation rate. Furthermore, we show that more octahedral distortions induce a larger deformation potential which is reflected on the acoustic phonon properties. Coherent acoustic phonon analysis indicates that the polaronic effect is crucial in achieving control over the scattering mechanism and ensuring spin lifetime protection, highlighting the potential of DJ-phase perovskites for spintronic applications.
RESUMO
Hot carrier solar cells could offer a solution to achieve high efficiency solar cells. Due to the hot-phonon bottleneck in perovskites, the hot carrier lifetime could reach hundreds of ps. Such that exploring perovskites could be a good way to promote hot carrier technology. With the incorporation of large organic cations, the hot carrier lifetime can be improved. By using ultrafast transient spectroscopy, the hot carrier relaxation and extraction kinetics are measured. From the transient kinetics, 2-phenyl-acetamidine cation based perovskites exhibit the highest initial carrier temperature, longest carrier relaxation, and slowest hot carrier relaxation. Such superior behavior could be attributed to reduced electron-phonon coupling induced by lattice strain, which is a result of the large organic cation and also a possible surface electronic state change. Our discovery exhibits the potential to use large organic cations for the use of hot carrier perovskite solar cells.
RESUMO
In two-dimensional/three-dimensional (2D/3D) perovskite heterostructure, randomly distributed multiple quantum wells (QW) 2D perovskites are frequently generated, which are detrimental to carrier transport and structural stability. Here, the high quality 2D/3D perovskite heterostructure is constructed by fabricating functional-group-induced single QW Dion-Jacobson (DJ) 2D perovskites. The utilization of âOCH3 in the precursor solution facilitates the formation of colloidal particles with uniform size, resulting in the production of a pure 2D DJ perovskite with an n value of 3. This strategy facilitates the improvement of 3D structural stability and expedites carrier transport. The resultant devices accomplish a power conversion efficiency of 25.26% (certified 25.04%) and 23.56% at a larger area (1 cm2 ) with negligible hysteresis. The devices maintain >96% and >89% of their initial efficiency after continuous maximum power point tracking under simulated AM1.5 illumination for 1300 h and under damp-heat conditions (85 °C and 85% RH) for 1010 h, respectively.
RESUMO
Solution-processed photodetectors have emerged as promising candidates for next-generation of visible-near infrared (vis-NIR) photodetectors. This is attributed to their ease of processing, compatibility with flexible substrates, and the ability to tune their detection properties by integrating complementary photoresponsive semiconductors. However, the limited performance continues to hinder their further development, primarily influenced by the difference of charge transport properties between perovskite and organic semiconductors. In this work, a perovskite-organic bipolar photodetectors (PDs) is introduced with multispectral responsivity, achieved by effectively managing charges in perovskite and a ternary organic heterojunction. The ternary heterojunction, incorporating a designed NIR guest acceptor, exhibits a faster charge transfer rate and longer carrier diffusion length than the binary heterojunction. By achieving a more balanced carrier dynamic between the perovskite and organic components, the PD achieves a low dark current of 3.74 nA cm-2 at -0.2 V, a fast response speed of <10 µs, and a detectivity of exceeding 1012 Jones. Furthermore, a bioinspired retinotopic system for spontaneous chromatic adaptation is achieved without any optical filter. This charge management strategy opens up possibilities for surpassing the limitations of photodetection and enables the realization of high-purity, compact image sensors with exceptional spatial resolution and accurate color reproduction.
RESUMO
Defects in the electron transport layer (ETL), perovskite, and buried interface will result in considerable nonradiative recombination. Here, a bottom-up bilateral modification strategy is proposed by incorporating arsenazo III (AA), a chromogenic agent for metal ions, to regulate SnO2 nanoparticles. AA can complex with uncoordinated Sn4+/Pb2+ in the form of multidentate chelation. Furthermore, by forming a hydrogen bond with formamidinium (FA), AA can suppress FA+ defects and regulate crystallization. Multiple chemical bonds between AA and functional layers are established, synergistically preventing the agglomeration of SnO2 nanoparticles, enhancing carrier transport dynamics, passivating bilateral defects, releasing tensile stress, and promoting the crystallization of perovskite. Ultimately, the AA-optimized power conversion efficiency (PCE) of the methylammonium-free (MA-free) devices (Rb0.02(FA0.95Cs0.05)0.98PbI2.91Br0.03Cl0.06) is boosted from 20.88% to 23.17% with a high open-circuit voltage (VOC) exceeding 1.18 V and ultralow energy losses down to 0.37 eV. In addition, the optimized devices also exhibit superior stability.
RESUMO
Highly selective photoreduction of CO2 to valuable hydrocarbons is of great importance to achieving a carbon-neutral society. Precisely manipulating the formation of the Metal1 â â â C=Oâ â â Metal2 (M1 â â â C=Oâ â â M2 ) intermediate on the photocatalyst interface is the most critical step for regulating selectivity, while still a significant challenge. Herein, inspired by the polar electronic structure feature of CO2 molecule, we propose a strategy whereby the Lewis acid-base dual sites confined in a bimetallic catalyst surface are conducive to forming a M1 â â â C=Oâ â â M2 intermediate precisely, which can promote selectivity to hydrocarbon formation. Employing the Ag2 Cu2 O3 nanowires with abundant Cuâ â â Ag Lewis acid-base dual sites on the preferred exposed {110} surface as a model catalyst, 100 % selectivity toward photoreduction of CO2 into CH4 has been achieved. Subsequent surface-quenching experiments and density functional theory (DFT) calculations verify that the Cuâ â â Ag Lewis acid-base dual sites do play a vital role in regulating the M1 â â â C=Oâ â â M2 intermediate formation that is considered to be prone to convert CO2 into hydrocarbons. This study reports a highly selective CO2 photocatalyst, which was designed on the basis of a newly proposed theory for precise regulation of reaction intermediates. Our findings will stimulate further research on dual-site catalyst design for CO2 reduction to hydrocarbons.
RESUMO
Solar-driven photocatalysis is a promising approach for renewable energy application. H2O2 photocatalysis by metal-free graphitic carbon nitride has been gaining attention. Compared with traditional thermal catalysis, metal-free graphitic carbon nitride photocatalysis could lower material cost and achieve greener production of H2O2. Also, to better guide photocatalyst design, a fundamental understanding of the reaction mechanism is needed. Here, we develop a series of model cost-effective metal-free H2O2 photocatalysts made from graphitic carbon nitride (melem) and common imide groups. With 4,4'-oxydiphthalic anhydride (ODPA)-modified g-C3N4, a H2O2 yield rate of 10781 µmol/h·g·L could be achieved. Transient absorption and ex situ Fourier transform infrared (FTIR) measurements revealed an ultrafast charge transfer from the melem core to water with â¼3 ps to form unique N-OH intermediates. The electron withdrawing ability of the anhydride group plays a role in governing the rate of electron transfer, ensuring efficient charge separation. Our strategy represents a new way to achieve a low material cost, simple synthesizing strategy, good environment impact, and high H2O2 production for renewable energy application.
RESUMO
The shortage of narrow band gap polymer acceptors with high electron mobility is the major bottleneck for developing efficient all-polymer solar cells (all-PSCs). Herein, we synthesize a distannylated electron-deficient biselenophene imide monomer (BSeI-Tin) with high purity/reactivity, affording an excellent chance to access acceptor-acceptor (A-A) type polymer acceptors. Copolymerizing BSeI-Tin with dibrominated monomer Y5-Br, the resulting A-A polymer PY5-BSeI shows a higher molecular weight, narrower band gap, deeper-lying frontier molecular orbital levels and larger electron mobility than the donor-acceptor type counterpart PY5-BSe. Consequently, the PY5-BSeI-based all-PSCs deliver a remarkable efficiency of 17.77 % with a high short-circuit current of 24.93â mA cm-2 and fill factor of 75.83 %. This efficiency is much higher than that (10.70 %) of the PY5-BSe-based devices. Our study demonstrates that BSeI is a promising building block for constructing high-performance polymer acceptors and stannylation of electron-deficient building blocks offers an excellent approach to developing A-A type polymers for all-PSCs and even beyond.
RESUMO
Interfacial nonradiative recombination loss is a huge barrier to advance the photovoltaic performance. Here, one effective interfacial defect and carrier dynamics management strategy by synergistic modulation of functional groups and spatial conformation of ammonium salt molecules is proposed. The surface treatment with 3-ammonium propionic acid iodide (3-APAI) does not form 2D perovskite passivation layer while the propylammonium ions and 5-aminopentanoic acid hydroiodide post-treatment lead to the formation of 2D perovskite passivation layers. Due to appropriate alkyl chain length, theoretical and experimental results manifest that COOH and NH3 + groups in 3-APAI molecules can form coordination bonding with undercoordinated Pb2+ and ionic bonding and hydrogen bonding with octahedron PbI6 4- , respectively, which makes both groups be simultaneously firmly anchored on the surface of perovskite films. This will strengthen defect passivation effect and improve interfacial carrier transport and transfer. The synergistic effect of functional groups and spatial conformation confers 3-APAI better defect passivation effect than 2D perovskite layers. The 3-APAI-modified device based on vacuum flash technology achieves an alluring peak efficiency of 24.72% (certified 23.68%), which is among highly efficient devices fabricated without antisolvents. Furthermore, the encapsulated 3-APAI-modified device degrades by less than 4% after 1400 h of continuous one sun illumination.
RESUMO
Low-dimensional metal halide perovskites are attracting extensive attention due to their enhanced quantum confinement and stability compared to three-dimensional perovskites. However, low dimensional connectivity in the inorganic frameworks leads to strongly bounded excitons with limited absorption properties, which impedes their application in photovoltaic devices. Here, we show that, by incorporating a strong electron accepting methylviologen cation, charge transfer (CT) at the organic/inorganic interface can effectively tune the optical properties in one-dimensional (1D) lead-halide perovskites. Both 1D MVPb2I6 and MVPb2Br6 display expanded absorption and photoresponse activity compared to CT inactive cations. The photoinduced CT process in MVPb2I6 was further characterized by transient absorption spectroscopy, which shows an ultrafast CT process within 1 ps, generating charge separated states. Our work unveils the interesting photophysics of these unconventional 1D perovskites with functional organic chromophores.
RESUMO
Solar energy conversions play a vital role in the renewable energy industry. In recent years, photoredox organic transformations have been explored as an alternative way to use solar energy. Catalysts for such photocatalytic systems have evolved from homogeneous metal complexes to heterogeneous nanomaterials over the past few decades. Herein, three important carrier transfer mechanisms are presented, including charge transfer, energy transfer and hot carrier transfer. Several models established by researchers to understand the catalytic reaction mechanisms are also illustrated, which promote the reaction system design based on theoretical studies. New strategies are introduced in order to enhance catalytic efficiency for future prospects.