Reference values and influencing factors of the glenohumeral subluxation index: a study on 3004 participants.

BACKGROUND: The primary objective of this study was to examine the glenohumeral subluxation index (GHSI) in a large general population cohort and to define reference values. Glenohumeral subluxation is important in the development and prediction of pathological states of the shoulder joint and in total shoulder arthroplasty. Therefore, another objective was to examine the influence of age, sex, body mass index, and body height and weight on GHSI. METHODS: GHSI according to Walch was measured on bilateral magnetic resonance imaging of 3004 participants of the Study of Health in Pomerania (SHIP, aged 21-90 years). SHIP drew a sample of the adult general population of Pomerania (Northeastern Germany). Reference values for GHSI were assessed by quantile regression models. Associations of sex, age, and anthropometric markers with the GHSI were calculated by linear regression models. RESULTS: A reference range between 42% and 55% for men with a mean of 49% ± 4% was defined, while the upper reference limit for women was 1% higher (mean, 50% ± 4%). Age was inversely associated with the GHSI in males (P < 0.001), while no significant association in females was observed (P = .625). Body weight and body mass index were positively associated (P < .001) without effect modification by sex. Heavy mechanical oscillations on the upper extremity showed no significant association with GHSI (P = .268). CONCLUSION: The reference values for GHSI were expanded to a range of 42%-57% on magnetic resonance imaging. Several associations between GHSI and anthropometric properties are present. According to these associations, adjusted formulas are provided to enable individual, patient-specific diagnostics and therapy. Nevertheless, the clinical picture cannot be neglected.

Next step trauma and orthopaedic surgery: integration of augmented reality for reduction and nail implantation of tibial fractures.

INTRODUCTION: There is a tremendous scope of hardware and software development going on in augmented reality (AR), also in trauma and orthopaedic surgery. However, there are only a few systems available for intra-operative 3D imaging and guidance, most of them rely on peri- and intra-operative X-ray imaging. Especially in complex situations such as pelvic surgery or multifragmentary multilevel fractures, intra-operative 3D imaging and implant tracking systems have proven to be of great advantage for the outcome of the surgery and can help reduce X-ray exposure, at least for the surgical team (Ochs et al. in Injury 41:1297 1305, 2010). Yet, the current systems do not provide the ability to have a dynamic live view from the perspective of the surgeon. Our study describes a prototype AR-based system for live tracking which does not rely on X-rays. MATERIALS AND METHODS: A protype live-view intra-operative guidance system using an AR head-mounted device (HMD) was developed and tested on the implantation of a medullary nail in a tibia fracture model. Software algorithms that allow live view and tracking of the implant, fracture fragments and soft tissue without the intra-operative use of X-rays were derived. RESULTS: The implantation of a medullar tibia nail is possible while only relying on AR-guidance and live view without the intra-operative use of X-rays. CONCLUSIONS: The current paper describes a feasibility study with a prototype of an intra-operative dynamic live tracking and imaging system that does not require intra-operative use of X-rays and dynamically adjust to the perspective of the surgeons due to an AR HMD. To our knowledge, the current literature does not describe any similar systems. This could be the next step in surgical imaging and education and a promising way to improve patient care.

Substantial decrease in paediatric lower extremity fracture rates in German hospitals in 2017 compared with 2002: an epidemiological study.

BACKGROUND: There are no recent studies on the frequency of paediatric lower extremity fractures in Germany. The aims of this study were to report fracture rates of paediatric lower extremity fractures treated in German hospitals in 2002 and 2017 and to detect changes over time as well as to evaluate the gender and age distribution for each fracture location. METHODS: Data from the German National Hospital Discharge Registry, which covers over 99% of all German hospitals, were used for this study. The absolute frequencies and incidence of lower extremity fractures as well as age at the time of fracture and gender were included in the data. The population was subdivided into four age groups: 0-4, 5-9, 10-14, and 15-19 years. The boy: girl ratio (BGR) for all fracture locations was calculated by dividing the absolute frequency of boys by that of girls. The fracture incidence in 2017 was compared with 2002 by calculating the incidence rate ratio (IRR). RESULTS: The total number of fractures decreased by 39.9% from 2002 to 2017. The most common fracture locations in 2002 were femoral shaft, tibial shaft, distal tibia, and lateral and medial malleolus; the absolute number of all these fractures was lower in 2017 than in 2002 in all age groups. The incidence of hip and thigh fractures, knee and lower leg fractures, and foot fractures decreased by 39.0, 41.1, and 33.3%. Proximal tibial fractures increased both in absolute numbers and in incidence in the age groups 0-4, 10-14, and 15-19 years (IRR ≥ 1.1). The overall BGR was 2.3 in 2002 and 2.0 in 2017, indicating that the number of girls relative to that of boys who suffered a lower extremity fracture was higher in 2017 than in 2002. Furthermore, the BGR of all fracture locations increased with age in both years. CONCLUSIONS: The number of paediatric lower extremity fractures treated in German hospitals in 2017 was significantly lower than that in 2002. However, the fracture frequency in girls decreased to a lesser extent than that in boys. The incidence of proximal tibial fractures increased.

Change in paediatric upper extremity fracture incidences in German hospitals from 2002 to 2017: an epidemiological study.

INTRODUCTION: Recent studies investigating the frequency of paediatric fractures in Germany are not available. The primary aim of this study was to report frequencies of the most common paediatric upper extremity fractures treated in German hospitals in 2002 and 2017 and to detect changes over time. METHODS: This study used inpatient data from the German National Hospital Discharge Registry. Absolute frequencies and incidences of the following fracture localisations were analysed: clavicle, proximal humerus, humerus shaft, distal humerus, ulna shaft, radius shaft, forearm shaft, distal radius, and distal forearm. Four age groups were formed: 0-4, 5-9, 10-14, and 15-19 years. The boy-girl ratio (BGR) was calculated for all fracture localisations for both years, respectively. Incidence rate ratios (IRRs) were calculated to compare fracture incidences between 2002 and 2017. RESULTS: The absolute number of the nine fracture localisations together decreased from 38,480 in 2002 to 35,128 in 2017. The overall BGR was 2.0 in both years. The BGR increased with increasing patient age. The incidence of clavicle fractures increased from 2002 to 2017 (IRR ≥ 1.72), while that of humerus fractures (proximal, shaft, and distal) remained the same or decreased (IRR ≤ 1.00) within all age groups. The incidence of isolated ulna or radius shaft fractures increased slightly or remained the same in the two lower age groups (IRR ≥ 1.00), while it decreased in the two higher age groups (IRR ≤ 0.80). Furthermore, complete forearm fractures were more frequent in the 0-4, 5-9, and 10-14 year age groups (IRR ≥ 1.44) in 2017 compared to 2002. The incidence of distal radius und forearm fractures changed only slightly. CONCLUSIONS: The absolute number of paediatric upper extremity fractures decreased from 2002 to 2017, while the incidence of in-hospital treatment of clavicle and forearm fractures increased significantly, indicating a trend towards operative treatment.

Computer-assisted navigation is beneficial both in primary and revision surgery with modular rotating-hinge knee arthroplasty.

PURPOSE: The objective of the present study was to explore the effect of navigation on the reconstruction of the mechanical leg axis, implant positioning and the restoration of the joint line in hinged knee arthroplasty in vivo. We present the first 1- to 3-year clinical and radiological results following computer-navigated implantation of the EnduRo modular rotating-hinge knee arthroplasty system (Aesculap AG, Tuttlingen, Germany) as a primary or revision implant. METHODS: Thirty-one patients were analysed retrospectively. Indication was revision surgery in 18 patients and complex primary surgery in 13. The clinical and radiological results of 31 patients with a minimum follow-up of 12 months (mean 22.2 ± 6.2 months) were recorded. Age at follow-up was 55.2 ± 9.9 years. RESULTS: The absolute varus-valgus deviation from the neutral mechanical leg axis was determined at 5.1° ± 5.1° preoperatively and 2.1° ± 1.4° postoperatively. No intraoperative complications or problems with the navigation system were observed. At latest follow-up, no component loosening was detected. Based on the Knee Society Score, a knee score of 64.9 ± 17.7 points and a function score of 67.2 ± 27.3 points were achieved. CONCLUSIONS: Encouraging short-term clinical and radiological results with the computer-navigated implantation of the modular rotating-hinge EnduRo knee arthroplasty system were found in both primary and revision surgery. The navigation facilitated the reconstruction of the leg axis, implant positioning and the restoration of the joint line. LEVEL OF EVIDENCE: IV.

Virtual mapping of 260 three-dimensional hemipelvises to analyse gender-specific differences in minimally invasive retrograde lag screw placement in the posterior acetabular column using the anterior pelvic and midsagittal plane as reference.

BACKGROUND: Due to complex pelvic geometry, percutaneous screw placement in the posterior acetabular column can pose a major challenge even for experienced surgeons. METHODS: The present study examined the preformed bone stock of the posterior acetabular column in 260 hemipelvises. Retrograde posterior column screws were virtually implanted using iPlan CMF (BrainLAB AG, Feldkirchen, Germany); maximal implant length, maximal implant diameter and angles between the screw trajectories and the reference planes anterior pelvic plane as well as the midsagittal plane were assessed for gender-specific differences. RESULTS: The virtual analysis of the preformed bone stock column showed two constrictions of crucial clinical importance. These were located 49.6 ± 3.4 (41.0-60.2) mm (inferior margin of acetabulum) and 77.0 ± 5.6 (66.5-95.3) mm (centre of acetabulum) from the entry point of the implant in men and respectively 43.7 ± 2.3 (38.3-49.3) mm as well as 71.2 ± 3.5 (63.5-79.99) mm in women (men vs. women: p < 0.001). The entry point of the retrograde posterior column screw was located dorsal from the transition of the lower margin of the ischial tuberosity to ramus inferior pointing to the medial margin of the ischial tuberosity. In female patients, the entry point was located significantly closer to the medial margin of the ischial tuberosity. However, 7.3 mm screws can generally be used in men and women. The angle between the screw trajectory and the anterior pelvic plane in sagittal section was 14.0 ± 4.9 (2.5-28.6) °, the angle between the screw trajectory and the midsagittal plane in axial section was 31.1 ± 12.8 (1.5-77.9) ° and the angle between the screw trajectory and the midsagittal plane in coronal section was 8.4 ± 3.8 (1.5-20.0) °. For all angles, significant gender-specific differences were found (p < 0.001). CONCLUSION: Therefore, the anterior pelvic plane as well as the midsagittal plane can facilitate intraoperative orientation for retrograde posterior column screw placement considering gender-specific differences in preformed bone corridor, implant length as well as angles formed between screw trajectory and these reference planes.

Retrograde lag screw placement in anterior acetabular column with regard to the anterior pelvic plane and midsagittal plane -- virtual mapping of 260 three-dimensional hemipelvises for quantitative anatomic analysis.

Percutaneous screw placement can be used for minimally invasive treatment of none or minimally displaced fractures of the anterior column. The complex pelvic geometry can pose a major challenge even for experienced surgeons. The present study examined the preformed bone stock of the anterior column in 260 hemipelvises (130 male and 130 female). Screws were virtually implanted using iPlan(®) CMF (BrainLAB AG, Feldkirchen, Germany); the maximal implant length and the maximal implant diameter were assessed. The study showed, that 6.5mm can generally be used in men; in women however individual planning is essential in regard to the maximal implant diameter since we found that in 15.4% of women, screws with a diameter less than 6.5mm were necessary. The virtual analysis of the preformed bone stock corridor of the anterior column showed two constrictions of crucial clinical importance. These can be found after 18% and 55% (men) respectively 16% and 55% (women) measured from the entry point along the axis of the implant. The entry point of the retrograde anterior column screw in our collective was located lateral of tuberculum pubicum at the level of the superior-medial margin of foramen obturatum. In female patients, the entry point was located significantly more lateral of symphysis and closer to the cranial margin of ramus superior ossis pubis. The mean angle between the screw trajectory and the anterior pelvic plane in sagittal section was 31.6 ± 5.5°, the mean angle between the screw trajectory and the midsagittal plane in axial section was 55.9 ± 4.6° and the mean angle between the screw trajectory and the midsagittal plane in coronal section was 42.1 ± 3.9° with no significant deviation between both sexes. The individual angles formed by the screw trajectory and the anterior pelvic and midsagittal plane are independent from anthropometric parameters sex, age, body length and weight. Therefore, they can be used for orientation in lag screw placement keeping in mind that the entry point differs in both sexes.

Controlled dynamic stability as the next step in "biologic plate osteosynthesis" - a pilot prospective observational cohort study in 34 patients with distal tibia fractures.

INTRODUCTION: Delayed bone healing is an eminent problem in the operative treatment of distal tibia fractures. To address this problem from a biomechanical perspective, the DLS 3.7 (Dynamic Locking Screw 3.7 mm) as a new generation of locking screws has been developed. This screw enables the surgeon to control the rigidity of the plate osteosynthesis and thereby to expand clinical options in cases where the bridge plating is chosen for fracture treatment. PURPOSE: The purpose of the present prospective study was to evaluate the safety use of the DLS 3.7 in distal tibia fractures where bridge plating osteosynthesis is recommended. METHODS: In a prospective non-controlled cohort study, 34 patients with acute distal tibia fractures (AO 43 A-C) were treated with an angular stable plate fixation using DLS 3.7 or LHS 3.5. Follow-up examinations were performed three, six, twelve, and twenty-four weeks postoperatively and all registered complications were carefully collected. RESULTS: A total of 34 patients were prospectively enrolled in this study with a minimum follow-up of 6 months or obvious osseous consolidation at an earlier stage. No complications directly related to the DLS 3.7 were recorded and no infections were observed. CONCLUSIONS: This observational study could show that the DLS 3.7 in combination with locking compression plates provides a secure and easy application. According to the recent literature inter-fragmentary micro-motion is one evident goal to increase the reliability in fracture healing. The new DLS 3.7 with a maximum micro-motion of 0.2 mm combines the advantage of micro-motion with the well-known advantages of angular stable plate fixation.