Exploring Defect-Engineered Metal-Organic Frameworks with 1,2,4-Triazolyl Isophthalate and Benzoate Linkers.

Synthesis and characterization of DEMOFs (defect-engineered metal-organic frameworks) with coordinatively unsaturated sites (CUSs) for gas adsorption, catalysis, and separation are reported. We use the mixed-linker approach to introduce defects in Cu2-paddle wheel units of MOFs [Cu2(Me-trz-ia)2] by replacing up to 7% of the 3-methyl-triazolyl isophthalate linker (1L2-) with the "defective linker" 3-methyl-triazolyl m-benzoate (2L-), causing uncoordinated equatorial sites. PXRD of DEMOFs shows broadened reflections; IR and Raman analysis demonstrates only marginal changes as compared to the regular MOF (ReMOF, without a defective linker). The concentration of the integrated defective linker in DEMOFs is determined by 1H NMR and HPLC, while PXRD patterns reveal that DEMOFs maintain phase purity and crystallinity. Combined XPS (X-ray photoelectron spectroscopy) and cw EPR (continuous wave electron paramagnetic resonance) spectroscopy analyses provide insights into the local structure of defective sites and charge balance, suggesting the presence of two types of defects. Notably, an increase in CuI concentration is observed with incorporation of defective linkers, correlating with the elevated isosteric heat of adsorption (ΔHads). Overall, this approach offers valuable insights into the creation and evolution of CUSs within MOFs through the integration of defective linkers.

Electrocatalytic Glycerol Conversion: A Low-Voltage Pathway to Efficient Carbon-Negative Green Hydrogen and Value-Added Chemical Production.

Electrochemical glycerol oxidation reaction (GLYOR) could be a promising way to use the abundantly available glycerol for production of value-added chemicals and fuels. Completely avoiding the oxygen evolution reaction (OER) with GLYOR is an evolving strategy to reduce the overall cell potential and generate value-added chemicals and fuels on both the anode and cathode. We demonstrate the morphology-controlled palladium nanocrystals, afforded by colloidal chemistry, and their established morphology-dependent GLYOR performance. Although it is known that controlling the morphology of an electrocatalyst can modulate the activity and selectivity of the products, still it is a relatively underexplored area for many reactions, including GLYOR. Among nanocube (Pd-NC), truncated octahedron (Pd-TO), spherical and polycrystalline (Pd-PC) morphologies, the Pd-NC electrocatalyst deposited on a Ni foam exhibits the highest glycerol conversion (85%) along with 42% glyceric acid selectivity at a low applied potential of 0.6 V (vs reversible hydrogen electrode (RHE)) in 0.1 M glycerol and 1 M KOH at ambient temperature. Owing to the much favorable thermodynamics of GLYOR on the Pd-NC surface, the assembled electrolyzer requires an electricity input of only ∼3.7 kWh/m3 of H2 at a current density of 100 mA/cm2, in contrast to the requirement of ≥5 kWh/m3 of H2 with an alkaline/PEM electrolyzer. Sustainability has been successfully demonstrated at 10 and 50 mA/cm2 and up to 120 h with GLYOR in water and simulated seawater.

Possible handle for broadening the catalysis regime towards low temperatures: proof of concept and mechanistic studies with CO oxidation on surface modified Pd-TiO2.

The present work demonstrates the effect of temperature-dependent surface modification (SM) treatment and its influence in broadening the catalysis regime with Pd-TiO2 catalysts prepared by various methods. Due to SM induced changes, a shift in the onset of CO oxidation activity as well as broadening of the oxidation catalysis regime by 30 to 65 K to lower temperatures is observed compared to the temperature required for virgin counterparts. SM carried out at 523 K for PdPhoto-TiO2 exhibits the lowest onset (10% CO2 production - T10) and T100 for CO oxidation at 360 and 392 K, respectively, while its virgin counterpart shows T10 and T100 at 393 and 433 K, respectively. The SMd Pd-TiO2 catalysts were investigated using X-ray photoelectron spectroscopy (XPS), ultra-violet photoelectron spectroscopy (UPS) and atomic force microscopy (AFM). It is observed that diffusion of atomic oxygen into Pd-subsurfaces leads to SM and changes the nature of the surface significantly. These changes are demonstrated by work function (ϕ), surface potential, catalytic activity, and correlation among them. UPS results demonstrate the maximum increase in ϕ by 0.5 eV for PdPhoto-TiO2 after SM, compared to all other catalysts. XPS study shows a moderate to severe change in the oxidation states of Pd due to atomic oxygen diffusion into the subsurface layers of Pd. Kelvin probe force microscopy (KPFM) study also reveals corroborating evidence that the surface potential increases linearly with increasing temperature deployed for SM up to 523 K, followed by a marginal decrease at 573 K. The ϕ measured by KPFM and UPS shows a similar trend and correlates well with the changes in catalysis observed. Our results indicate that there is a strong correlation between surface physical and chemical properties, and ϕ changes could be considered as a global marker for chemical reactivity.

CO2 electrolysis towards large scale operation: rational catalyst and electrolyte design for efficient flow-cell.

The electrochemical CO2 reduction reaction (CO2RR) to renewable fuels/chemicals is a potential approach towards addressing the carbon neutral economy. To date, a comprehensive analysis of key performance indicators, such as an intrinsic property of catalyst, reaction environment and technological advancement in the flow cell, is limited. In this study, we discuss how the design of catalyst material, electrolyte and engineering gas diffusion electrode (GDE) could affect the CO2RR in a gas-fed flow cell. Significant emphasis is given to scale-up requirements, such as promising catalysts with a partial current density of ≥100 mA cm-2 and high faradaic efficiency. Additional experimental hurdles and their potential solutions, as well as the best available protocols for data acquisition for catalyst activity evaluation, are listed. We believe this manuscript provides some insights into the making of catalysts and electrolytes in a rational manner along with the engineering of GDEs towards CO2RR.

Photocatalytic setup for in situ and operando ambient-pressure X-ray photoelectron spectroscopy at MAX IV Laboratory.

The Ambient-Pressure X-ray Photoelectron Spectroscopy (APXPS) endstation at the SPECIES beamline at MAX IV Laboratory has been improved. The latest upgrades help in performing photo-assisted experiments under operando conditions in the mbar pressure range using gas and vapour mixtures whilst also reducing beam damage to the sample caused by X-ray irradiation. This article reports on endstation upgrades for APXPS and examples of scientific cases of in situ photocatalysis, photoreduction and photo-assisted atomic layer deposition (photo-ALD).

Nanostructured Co-doped BiVO4 for efficient and sustainable photoelectrochemical chlorine evolution from simulated sea-water.

The co-production of hydrogen and chlorine from sea-water splitting could be a potential, sustainable and attractive route by any method. However, challenges to overcome are many, and critically, the sustainability and operating potential of the electrocatalyst are important. In this work, we report on Co-doping in the BiVO4 (Co-BV) crystal lattice and employed the same as the photoanode; Co-BV exhibits a photocurrent of 190 µA cm-2 at 1.1 V vs. RHE (the reversible hydrogen electrode) in the acidic sodium chloride solution (pH 2.3) under one sun illumination. The best-performing photoanode, with 0.05 mol% of Co doping (0.05 Co-BV), selectively produced active chlorine with 92% faradaic efficiency at 1.1 V vs. RHE by successfully suppressing the kinetically sluggish oxygen evolution reaction (OER) and the stability of the catalyst was demonstrated for up to 20 h. This is the lowest operating potential reported for the chlorine evolution reaction (CER), thus far. The overpotential required for CER with 0.05 Co-BV is lower than that of OER, which leads to selective CER at 1.1 V (vs. RHE). Co-doping into the BiVO4 lattice decreases the charge transfer resistance and enhances the CER kinetics due to its structural and electronic integration with the BV lattice. We demonstrate that Co-doping also improves the lifetime of the charge carrier and enhances the current density of CER and sustainability of the catalyst.

Selective and Generic Photocatalytic Oxidation of Alcohol with Pd-TiO2 Thin Films: Butanols to Butanal/Butanone with Different Morphologies of Pd and 0.5θPt -Pd Counterparts.

The present study reports on the photocatalytic oxidation of butanols to butanal/butanone using thin film form of facet-dependent nano-Pd supported on commercial TiO2 under one-sun condition and demonstrates the generic nature. Pd-nanocube (PdNC (100)), Pd-truncated octahedron (PdTO (100) and (111)), polycrystalline (PdPC ), and their counterparts with half-a-monolayer Pt-coated on Pd (0.5θPt -Pd)) have been used as co-catalyst. A potentially scalable thin film form of Pd/TiO2 photocatalyst, prepared by drop-casting method, has been employed to study oxidation of n-butanol, 2-butanol, and iso-butanol to corresponding aldehyde/ketone. 100% selectivity is demonstrated to respective aldehyde/ketone with any catalyst used in the present study with varying degree of butanols conversion by NMR. 0.5θPt -PdTO /TiO2 shows the highest conversion of 2-butanol to butanone (13.6% in 4 h). Continuous 10 h of reaction with the most active 0.5θPt -PdTO /P25 catalyst demonstrates 31% conversion of 2-butanol to butanone, and catalyst recyclability has been demonstrated. The present protocol can be scalable to large scales to maximize the conversion in direct sunlight. Due to its generic nature, the current method can also be applied to many other alcohols and substrate molecules.

Possible Fine-Tuning of Methane Activation toward C2 Oxygenates by 3d-Transition Metal-Ions Doped Nano-Ceria-Zirconia.

In this work, we demonstrate a simple sol-gel technique to prepare metal-ion(s)-doped ceria-zirconia solid solution for efficient catalytic methane activation. The cation-depicting formula units are Ce0.80Zr0.20 (CZ), Ce0.79Zr0.20M0.01 (CZM), and Ce0.79Zr0.20M0.005M10.005 (CZMM1) (M and M1 = V, Mn, Fe, Co, and Cu), employed for undoped, mono-metal-ion-doped, and bi-metal-ion-doped solid solutions, respectively. Methane activation with Mn, Fe, Cu mono-metal-ion-doped CZ favors the C1 product, while CZCo assists C-C coupling with the formation of acetaldehyde. On the other hand, the Co- and Fe-doped bi-metal-ion combination catalyst (CZCoFe) shows significant ethanol but predominant formic acid formation. This is further promoted by the Co + V bi-metal-ion combination (CZCoV) catalyst, and it shows ethanol as the major product along with methyl hydrogen peroxide, methanol, and formic acid as minor products. An impressive ethanol yield of 93 µmol/g h with 76% selectivity obtained with the CZCoV catalyst is at par with that obtained with noble-metal-based catalysts under comparable reaction conditions. When Co and V content was increased two and four times from 0.005 to 0.01 and 0.02, ethanol yield increased at the expense of formic acid. The 213 µmol/g h ethanol yield (86% selectivity) observed with Ce0.76Zr0.20Co0.02V0.02 is probably the highest observed. The partial oxidation of CH4 in Co-based bi-metal combinations (Co + V or Co + Fe) suggests the synergistic effect of doped metal ions owing to the heterogeneous near-neighbor environment. The present results are attributed to the surface heterogeneity between the host and the dopants, which selectively promotes methane activation as well as C-C coupling. This indicates a large scope to tune the activity of partial oxidation of methane and product selectivity with different metal-ion(s) combinations.

Concerted effect of Ni-in and S-out on ReS2 nanostructures towards high-efficiency oxygen evolution reaction.

Herein, a one-step hydrothermal reaction is developed to synthesize a Ni-doped ReS2 nanostructure with sulphur defects. The material exhibited excellent OER activity with a current density of 10 mA cm-2 at an overpotential of 270 mV, a low Tafel slope of 31 mV dec-1, and good long-term durability of 10 h in 1 M KOH. It shows high faradaic efficiency of 96%, benefiting from the rapid charge transfer caused by the concerted effect of Ni-in and S-out on the ReS2 nanostructure.

Sulfur Functionalization via Epoxide Ring Opening on a Reduced Graphene Oxide Surface to Form Metal (II) Organo-bis-[1,2]-oxathiin.

The epoxide ring-opening reaction in graphene oxide (GO) by nucleophiles is a very fascinating and advanced methodology to develop novel functional material. Herewith, we report an advanced strategy for opening the epoxide ring on the rGO surface via easily an available nucleophile (Na2S), which is further functionalized with O atom to obtain four-membered rings (FMRs). The Cd coordination with the S atom puts extra stress on the FMR leading to the C-C bond cleavage of the four-membered heteroatomic rings on the rGO surface. This strategic approach leads to the fabrication of an innovative metal (II) organo-bis-[1,2]-oxathiin (MOBOT) chemical moiety (M = Cd, Zn). The MOBOT compound further shows enhanced H2 generation activity and hence is promising as a potential photocatalyst for solar hydrogen generation. This compound might also be a potential candidate for optoelectronic applications.

Gas-solid interactions with reactive and inert gas molecules by NAPUPS: can work function be a better descriptor of chemical reactivity?

The gas-phase vibrational spectra of reactive (H2 and O2) and inert gases (N2 and Ar) have been studied by near-ambient pressure (NAP) ultraviolet photoelectron spectroscopy (NAPUPS) up to 0.3 mbar pressure. The results obtained are divided into two parts and discussed. In the first part, the photoelectron spectra of monoatomic Ar and some homonuclear diatomic molecules, such as H2, O2, and N2, have been recorded by NAPUPS and the effect of pressure on their energy position has been studied. It has been demonstrated that NAPUPS could be an essential tool to determine the intermolecular or interatomic interactions. In the second part, we have evaluated the influence of different solid surfaces on the binding energy (BE) position, the pattern of the vibrational features of diatomic N2 molecules, and the first atomic levels (3p3/2 and 3p1/2) of monoatomic Ar. It has been observed that with a change in the (electronic/chemical) nature of the surface, the BE of the above features also changes and reflects the change in the work function (φ) of the material. It is to be noted that Ar is an inert/noble gas and N2 is the most stable molecule, and the above changes observed underscore that they can be employed as probe atoms/molecules to explore even the minor changes that occur on a solid surface due to a variety of reasons. Further, if the solid surface undergoes any chemical/electronic changes due to gas-solid interaction, such as oxidation/reduction, the φ of the surface changes again; this highlights the precise identification of the changes that occur under the reaction/measurement conditions. Therefore, the change in the BE of the gas-phase features can be used to determine even the minor changes in the φ of solid surfaces during the reaction or due to the reaction. The present findings have implications in probing the surface changes that occur in any surface-dependent phenomena, such as heterogeneous catalysis, electrochemistry, and materials that are predominantly controlled by surface contribution, such as layered (2D) materials, nanomaterials.

Can Half-a-Monolayer of Pt Simulate Activity Like That of Bulk Pt? Solar Hydrogen Activity Demonstration with Quasi-artificial Leaf Device.

Pt is the best cocatalyst for hydrogen production. It is also well-known that the surface atomic layer is critical for catalysis. To minimize the Pt content as cocatalyst, herein we report on half-a-monolayer of Pt (0.5θPt) decorated on earth-abundant Ni-Cu cocatalyst, which is integrated with a quasi-artificial leaf (QuAL) device (TiO2/ZnS/CdS) and demonstrated for efficient solar hydrogen production. For the QuAL, TiO2 is sensitized with ZnS and CdS quantum dots by the SILAR method. The 0.5θPt-decorated Ni-Cu shows an onset potential of 0.05 V vs reversible hydrogen electrode for the hydrogen evolution reaction, which is almost similar to that of commercial Pt/C. Photoactivity of the present QuAL device with either bulk Pt or 0.5θPt-coated Ni-Cu cocatalyst is, surprisingly, equal. Our findings underscore that a fraction of a monolayer of Pt can enhance the activity of the cocatalyst, and it is worth exploring further for the high activity associated with atomic Pt and other noble metals.

Phase Transfer Ceria-Supported Nanocatalyst for Nitrile Hydration Reaction.

The present study elaborates the catalytic effect of rare-earth metal oxides (Sm2O3 and La2O3) over ceria as a support phase transfer catalyst. The synthesized catalysts have been subjected to different characterization techniques, such as field-emission scanning electron microscopy, high-resolution transmission electron microscopy, powder X-ray diffraction, N2 adsorption-desorption (BET surface analysis), temperature-programmed desorption study (NH3/CO2-TPD), Fourier transform infrared, Raman analysis, and X-ray photoelectron spectroscopy to get better insights into the catalytic activity of the catalysts for hydration of nitrile.

Electronic Integration and Thin Film Aspects of Au-Pd/rGO/TiO2 for Improved Solar Hydrogen Generation.

In the present work, we have synthesized noble bimetallic nanoparticles (Au-Pd NPs) on a carbon-based support and integrated with titania to obtain Au-Pd/C/TiO2 and Au-Pd/rGO/TiO2 nanocomposites using an ecofriendly hydrothermal method. Here, a 1:1 (w/w) Au-Pd bimetallic composition was dispersed on (a) high-surface-area (3000 m2 g-1) activated carbon (Au-Pd/C), prepared from a locally available plant source (in Assam, India), and (b) reduced graphene oxide (rGO) (Au-Pd/rGO); subsequently, they were integrated with TiO2. The shift observed in Raman spectroscopy demonstrates the electronic integration of the bimetal with titania. The photocatalytic activity of the above materials for the hydrogen evolution reaction was studied under 1 sun conditions using methanol as a sacrificial agent in a powder form. The photocatalysts were also employed to prepare a thin film by the drop-casting method. Au-Pd/rGO/TiO2 exhibits 43 times higher hydrogen (H2) yield in the thin film form (21.50 mmol h-1 g-1) compared to the powder form (0.50 mmol h-1 g-1). On the other hand, Au-Pd/C/TiO2 shows 13 times higher hydrogen (H2) yield in the thin film form (6.42 mmol h-1 g-1) compared to the powder form (0.48 mmol h-1 g-1). While powder forms of both catalysts show comparable activity, the Au-Pd/rGO/TiO2 thin film shows 3.4 times higher activity than that of Au-Pd/C/TiO2. This can be ascribed to (a) an effective separation of photogenerated electron-hole pairs at the interface of Au-Pd/rGO/TiO2 and (b) the better field effect due to plasmon resonance of the bimetal in the thin film form. The catalytic influence of the carbon-based support is highly pronounced due to synergistic binding interaction of bimetallic nanoparticles. Further, a large amount of hydrogen evolution in the film form with both catalysts (Au-Pd/C/TiO2 and Au-Pd/rGO/TiO2) reiterates that charge utilization should be better compared to that in powder catalysts.

Molybdenum carbide catalyst for the reduction of CO2 to CO: surface science aspects by NAPPES and catalysis studies.

Carbon dioxide is a greenhouse gas, and needs to be converted into one of the useful feedstocks, such as carbon monoxide and methanol. We demonstrate the reduction of CO2 with H2 as a reducing agent, via a reverse water gas shift (RWGS) reaction, by using a potential and low cost Mo2C catalyst. Mo2C was evaluated for CO2 hydrogenation at ambient pressure as a function of temperature, and CO2 : H2 ratio at a gas hourly space velocity (GHSV) of 20 000 h-1. It is demonstrated that the Mo2C catalyst with 1 : 3 ratio of CO2 : H2 is highly active (58% CO2 conversion) and selective (62%) towards CO at 723 K at ambient pressure. Both properties (basicity and redox properties) and high catalytic activity observed with Mo2C around 700 K correlate well and indicate a strong synergy among them towards CO2 activation. X-ray diffraction and Raman analysis show that the Mo2C catalyst remains in the ß-Mo2C form before and after the reaction. The mechanistic aspects of the RWGS reaction were determined by near-ambient pressure X-ray photoelectron spectroscopy (NAPXPS) with in situ generated Mo2C from carburization of Mo-metal foil. NAPXPS measurements were carried out at near ambient pressure (0.1 mbar) and various temperatures. Throughout the reaction, no significant changes in the Mo2+ oxidation state (of Mo2C) were observed indicating that the catalyst is highly stable; C and O 1s spectral results indicate the oxycarbide species as an active intermediate for RWGS. A good correlation is observed between catalytic activity from atmospheric pressure reactors and the electronic structure details derived from NAPXPS results, which establishes the structure-activity correlation.

Morphology-dependent, green, and selective catalytic styrene oxidation on Co3O4.

Despite the great successes in the controlled fabrication of nanomaterials with specific composition and morphology, it is still challenging to have the desired control on the defect sites of catalyst materials. For unfolding the mystery of this aspect, catalytic styrene epoxidation was attempted on spinel Co3O4 with two different morphologies, namely, SNR (nanorods prepared by the solvothermal method with the (110) facet), HNR (nanorods prepared by the hydrothermal methodwith the (111) facet) and NC (nanocubes with the (110) facet) were synthesized and subjected to olefin oxidation with O2. Even without any catalyst pretreatment, all three Co3O4 catalyst systems were found to be active for selective epoxidation of styrene with O2 at ambient pressure in the liquid phase. The correlation between catalytic activity and selectivity trend suggests that the reaction is highly structure-sensitive and facile on the (110) facet. Temperature-dependent near ambient pressure X-ray photoelectron spectroscopy (NAPXPS) was carried out at 0.1 mbar O2 pressure to understand the mechanistic aspects. The distinct catalytic activity of NC (110) and SNR (110) can be attributed to the population of defect sites on the catalyst surface. NC morphology with comparatively fewer defect sites shows high activity and selectivity, suggesting that styrene oxidation on Co3O4 is structure-sensitive; however, unlike metal surfaces, fewer defects are more favourable for catalytic styrene epoxidation due to facile adsorption and activation of the substrate and O2 on Co3+ sites. The present investigations suggest that surface defects need not necessarily increase catalytic activity.

Why the thin film form of a photocatalyst is better than the particulate form for direct solar-to-hydrogen conversion: a poor man's approach.

We demonstrated an easy method to improve the efficiency of photocatalysts by an order of magnitude by maximizing light absorption and charge carrier diffusion. Degussa titania (P25) and Pd/P25 composite photocatalyst thin films coated over regular glass plates were prepared and evaluated for solar hydrogen production in direct sunlight with aqueous methanol. It is worth noting that only UV light present in direct sunlight (∼4%) was absorbed by the catalysts. The hydrogen production activities of catalysts were compared for thin film and particulate forms at 1 and 25 mg levels. The hydrogen yield values suggested that 1 mg thin film form of Pd/P25 provided 11-12 times higher activity than 25 mg powder form. Comparable light absorption throughout the entire thickness of photocatalyst device and better contact of nanostructures that enabled the charge diffusion and charge utilization at redox sites are the reasons for high efficiency. While solar cells require charge carriers to diffuse through long distances of microns, they are utilized locally in an ensemble of particles (of nanometres) for hydrogen generation in photocatalyst thin films; this concept was used effectively in the present work.

New Strategy toward a Dual Functional Nanocatalyst at Ambient Conditions: Influence of the Pd-Co Interface in the Catalytic Activity of Pd@Co Core-Shell Nanoparticles.

Bimetallic nanostructures with a combination of noble and nonnoble metals hold promise for improving catalyst activity and selectivity. Here, we report the synthesis of Pd@Co (PC) core-shell morphology nanoparticles with three different ratios of palladium (Pd) and cobalt (Co), and a possibility to fine tune the ratio of core and shell thickness. PC exhibits superior and selective hydrogenation as well as oxidation catalytic activity at ambient or near-ambient conditions. Various characterization techniques have been employed to confirm the core-shell morphology. Without any pre-treatment or activation, fresh catalysts with different Pd to Co ratios, that is, 2:1, 1:1, and 1:2, were subjected to olefin (phenylacetylene) hydrogenation and oxidation (styrene to styrene oxide) reaction. The catalytic activity results demonstrate that the 1:1 ratio of Pd/Co is the most active composition for controlled and stepwise reduction of phenyl acetylene to styrene and then to ethyl benzene; 1:1 Pd/Co shows 100% styrene conversion in 30 min. with an order of magnitude higher turnover frequency than other catalysts. The 1:1 PC ratio is also the most active composition for selective oxidation of styrene to styrene oxide. NAPXPS (near-ambient pressure XPS) results show that the active sites for catalytic C═C hydrogenation and oxidation reaction are Co0 and Co3+, respectively. However, the superior catalytic performance can be attributed to Co0 (for reduction) or Co3+ (for oxidation), and the Pd-Co interface plays a critical role in stabilizing the required functional character. NAPXPS results confirm that the superior catalytic performance can be attributed not only to Co0 or Co3+, but also to the Pd-Co interface. The electronic effect and synergism between Co and Pd helps Co to stabilize in different oxidation states depending on the reaction conditions, and making it a dual functional catalyst.

A Study on Doped Heterojunctions in TiO2 Nanotubes: An Efficient Photocatalyst for Solar Water Splitting.

The two important factors that affect sunlight assisted water splitting ability of TiO2 are its charge recombination and large band gap. We report the first demonstration of nitrogen doped triphase (anatase-rutile-brookite) TiO2 nanotubes as sun light active photocatalyst for water splitting with high quantum efficiency. Nitrogen doped triphase TiO2 nanotubes, corresponding to different nitrogen concentrations, are synthesized electrochemically. Increase in nitrogen concentration in triphase TiO2 nanotubes is found to induce brookite to anatase phase transformation. The variation in density of intra-band states (Ti3+ and N 2p states) with increase in nitrogen doping are found to be critical in tuning the photocatalytic activity of TiO2 nanotubes. The presence of bulk heterojunctions in single nanotube of different nitrogen doped TiO2 samples is confirmed from HRTEM analysis. The most active nitrogen doped triphase TiO2 nanotubes are found to be 12 times efficient compared to pristine triphase TiO2, for solar hydrogen generation. The band alignment and charge transfer pathways in nitrogen doped TiO2 with triphase heterojunctions are delineated. Bulk heterojunctions among the three phases present in the nanotubes with intra-band defect states is shown to enhance the photocatalytic activity tremendously. Our study also confirms the theory that three phase system is efficient in photocatalysis compared to two phase system.