Redox exfoliated NbS2: characterization, stability, and oxidation.

Niobium disulfide is a layered transition metal dichalcogenide that is being exploited as a two-dimensional material. Although it is a superconductor at low temperatures and demonstrates great potential to be applied as a catalyst or co-catalyst in hydrogen evolution reactions, only a few reports have demonstrated the synthesis of a few-layer NbS2. However, before applications can be pursued, it is essential to understand the main characteristics of the obtained material and its stability under an atmospheric environment. In this work, we conducted a thorough characterization of redox-exfoliated NbS2 nanoflakes regarding their structure and stability in an oxygen-rich environment. Structural, morphological, and spectroscopic characterization demonstrated different fingerprints associated with distinct oxidation processes. This led us to identify oxide species and analyse the stability of the redox exfoliated NbS2 nanosheets in air, suggesting the most likely reaction pathways during the NbS2 interaction with oxygen, which agrees with our density-functional theory results. The mastery over the stability of layered materials is of paramount importance to target future applications, mainly because the electronic properties of these materials are strongly affected by an oxidizing environment.

3d transition metal coordination on monolayer MoS2: a facile doping method to functionalize surfaces.

Two-dimensional materials (2DM) have attracted much interest due to their distinct optical, electronic, and catalytic properties. These properties can be tuned by a range of methods including substitutional doping and, as recently demonstrated, by surface functionalization with single atoms, thus increasing the 2DM portfolio. We theoretically and experimentally describe the coordination reaction between MoS2 monolayers and 3d transition metals (TMs), exploring their nature and MoS2-TM interactions. Density functional theory calculations, X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy point to the formation of MoS2-TM coordination complexes, where the adsorption energy for 3d TMs resembles the crystal-field (CF) stabilization energy for weak-field complexes. Pearson's theory for hard-soft acid-base and ligand-field theory were used to discuss the periodic trends of 3d TM coordination on MoS2 monolayer surfaces. We found that softer acids with higher ligand field stabilization energy, such as Ni2+, tend to form bonds with more covalent character with MoS2, which can be considered a soft base. On the other hand, harder acids, such as Cr3+, tend to form more ionic bonds. Additionally, we studied the trends in charge transfer and doping observed from XPS and PL results, where metals like Ni led to n-type doping. In contrast, Cu functionalization results in p-type doping. Therefore, the formation of coordination complexes on TMD's surface is a potentially effective way to control and understand the nature of single-atom functionalization of TMD monolayers without relying on or creating new defects.

Spontaneous chemical functionalization via coordination of Au single atoms on monolayer MoS2.

Surface functionalization of metallic and semiconducting 2D transition metal dichalcogenides (TMDs) have mostly relied on physi- and chemi-sorption at defect sites, which can diminish the potential applications of the decorated 2D materials, as structural defects can have substantial drawbacks on the electronic and optoelectronic characteristics. Here, we demonstrate a spontaneous defect-free functionalization method consisting of attaching Au single atoms to monolayers of semiconducting MoS2(1H) via S-Au-Cl coordination complexes. This strategy offers an effective and controllable approach for tuning the Fermi level and excitation spectra of MoS2 via p-type doping and enhancing the thermal boundary conductance of monolayer MoS2, thus promoting heat dissipation. The coordination-based method offers an effective and damage-free route of functionalizing TMDs and can be applied to other metals and used in single-atom catalysis, quantum information devices, optoelectronics, and enhanced sensing.

Selective Synthesis of Bi2Te3/WS2 Heterostructures with Strong Interlayer Coupling.

The vertical integration of atomically thin-layered materials to create van der Waals heterostructures (vdWHs) has been proposed as a method to design nanostructures with emergent properties. In this work, epitaxial Bi2Te3/WS2 vdWHs are synthesized via a two-step vapor deposition process. It is calculated that the vdWH has an indirect band gap with a valence band edge that bridges the vdW gap, resulting in a quenched photoluminescence (PL) from the WS2 monolayer, reduced intensity of its resonance Raman vibrational peaks, improved vertical charge transport, and a decrease in the intensity of second harmonic generation (SHG). Furthermore, it is observed that induced defects strongly influence the nucleation and growth of vdWHs. By creating point defects in WS2 monolayers, it is shown that the growth of Bi2Te3 platelets can be patterned. This work offers important insights into the synthesis, defect engineering, and moiré engineering of an emerging class of two-dimensional (2D) heterostructures.

Photoinduced electron transfer dynamics of AuNPs and Au@PdNPs supported on graphene oxide probed by dark-field hyperspectral microscopy.

The time scale for interfacial photoinduced electron transfer (PeT) in plasmonic nanoparticles is not well established and the details are still under debate. This has renewed the interest in studying the electron transfer effect from both experimental and theoretical points of view. We present a quantitative analysis of PeT in single spherical gold (Au) and gold@palladium core@shell (Au@Pd) nanoparticles supported on reduced graphene oxide (RGO) using dark-field hyperspectral microscopy (DFHM) and electrochemical impedance spectroscopy (EIS). By studying the plasmon bandwidth in the scattering spectra of single particles and by correlating it to the plasmon damping processes we showed that PeT occurs from the AuNPs to RGO in a 10 fs time scale with a quantum efficiency of 35%. The introduction of a Pd shell on the AuNPs decreases the PeT time, with transfer occurring in as little as 1.7 fs with quantum yield higher than 74%. Furthermore, EIS showed a smaller resistance for PeT on RGO/Au@PdNPs under green light illumination. Our results can improve the understanding of the chemical interface damping process due to PeT in plasmonic nanomaterials and can enable the design of more efficient plasmon enhanced photocatalysts.

Phase transition and electronic structure investigation of MoS2-reduced graphene oxide nanocomposite decorated with Au nanoparticles.

In this work a simple approach to transform MoS2 from its metallic (1T' to semiconductor 2H) character via gold nanoparticle surface decoration of a MoS2 reduced graphene oxide (rGO) nanocomposite is proposed. The possible mechanism to this phase transformation was investigated using different spectroscopy techniques, and supported by density functional theory theoretical calculations. A mixture of the 1T'- and 2H-MoS2 phases was observed from the Raman and Mo 3d high resolution x-ray photoelectron spectra analysis in the MoS2-rGO nanocomposite. After surface decoration with gold nanoparticles the concentration of the 1T' phase decreases making evident a phase transformation. According to Raman and valence band spectra analyzes, the Au nanoparticles (NPs) induce a p-type doping in MoS2-rGO nanocomposite. We proposed as a main mechanism to the MoS2 phase transformation the electron transfer from Mo 4d xy,xz,yz in 1T' phase to AuNPs conduction band. At the same time, the unoccupied electronic structure was investigated from S K-edge near edge x-ray absorption fine structure spectroscopy. Finally, the electronic coupling between unoccupied electronic states was investigated by the core hole clock approach using resonant Auger spectroscopy, showing that AuNPs affect mainly the MoS2 electronic states close to Fermi level.

Exploring the metallochromic behavior of pentacyanidoferrates in visual, electronic and Raman spot tests.

Pentacyanidoferrate(II) complexes of aromatic N-heterocycles, such as 4-cyanopyridine, exhibit characteristic colors and strong metallochromism associated with the donor-acceptor interactions of the metal ions with the cyanide ligands. In the presence of transition metal ions insoluble polymeric complexes are formed, displaying bright yellow, red, brown and green colors with zinc(II), nickel(II), copper(II) and iron(III) ions, respectively. Such metallochromic response is better observed on filter paper, allowing applications in analytical spot tests. The effects can be explored visually and probed by means of modern instrumental facilities, including spectrophotometric and resonance Raman techniques. In this way, by using the cyanopyridinepentacyanidoferrates, the Prussian Blue test for ferric ions can be extended to the entire row of transition metal elements, providing a new and modern insight of such classical Feigl's spot tests.

Real-time optofluidic surface-enhanced Raman spectroscopy based on a graphene oxide/gold nanorod nanocomposite.

We demonstrate a glass microcapillary fiber as an optofluidic platform for surface enhanced Raman spectroscopy (SERS), the inner walls of which are coated with a graphene oxide (GO)/gold nanorod (AuNR) nanocomposite. A simple thermal method is used for the coating, allowing for the continuous deposition of the nanocomposite without surface functionalization. We show that the AuNRs can be directly and nondestructively identified on the GO inside the capillaries via identification of the Au-Br SERS peak, as Br- ions from the AuNR synthesis remain on their surface. The coated microcapillary platform is, then, used as a stable SERS substrate for the detection of Rhodamine 6G (R6G) and Rhodamine 640 (RH640) at concentrations down to 10-7 and 10-9 M, respectively. As the required sample volumes are as low as a few hundred nanoliters, down to ~75 femtograms of analyte can be detected. The fiber also allows for the detection of the molecules at acquisition times as low as 0.05 s, indicating the platform's suitability for real-time sensing.

Unveiling the structure of polytetraruthenated nickel porphyrin by Raman spectroelectrochemistry.

The structure of polytetraruthenated nickel porphyrin was unveiled for the first time by electrochemistry, Raman spectroelectrochemistry, and a hydroxyl radical trapping assay. The electrocatalytic active material, precipitated on the electrode surface after successive cycling of [NiTPyP{Ru(bipy)2Cl}4](4+) species in strong aqueous alkaline solution (pH 13), was found to be a peroxo-bridged coordination polymer. The electropolymerization process involves hydroxyl radicals (as confirmed by the characteristic set of DMPO/(•)OH adduct EPR peaks) as reaction intermediates, electrocatalytically generated in the 0.80-1.10 V range, that induce the formation of Ni-O-O-Ni coordination polymers, as evidenced by Raman spectroelectrochemistry and molecular modeling studies. The film growth is halted above 1.10 V due to the formation of oxygen gas bubbles.

Hyperspectral dark-field microscopy of gold nanodisks.

The light scattering properties of hexagonal and triangular gold nanodisks were investigated by means of Cytoviva hyperspectral dark-field microscopy, exploring the huge enhancement of the scattered waves associated with the surface plasmon resonance (SPR) effect. Thanks to the high resolution capability of the dark-field microscope, the SPR effect turned it possible to probe the individual nanoparticles directly from their hyperspectral images, extrapolating the classical optical resolution limit, and providing their corresponding extinction spectra. Blue spectral shifts involving the in-plane dipolar modes were observed for the hexagonal gold nanodisks in relation to the triangular ones, allowing their spectroscopic differentiation in the dark-field images.

A novel functionalisation process for glucose oxidase immobilisation in poly(methyl methacrylate) microchannels in a flow system for amperometric determinations.

Different materials like glass, silicon and poly(methyl methacrylate) (PMMA) are being used to immobilise enzymes in microchannels. PMMA shows advantages such as its low price, biocompatibility and attractive mechanical and chemical properties. Despite this, the introduction of reactive functional groups on PMMA is still problematic, either because of the complex chemistry or extended reaction time involved. In this paper, a new methodology was developed to immobilise glucose oxidase (GOx) in PMMA microchannels, with the benefit of a rapid immobilisation process and a very simple route. The new procedure involves only two steps, based on the reaction of 5.0% (w/w) polyethyleneimine (PEI) with PMMA in a dimethyl sulphoxide medium, followed by the immobilisation of glucose oxidase using a solution containing 100U enzymes and 1.0% (v/v) glutaraldehyde. The reactors prepared in this way were evaluated by a flowing system with amperometric detection (+0.60V) based on the oxidation of the H2O2 produced by the reactor. The microreactor proposed here was able to work with high bioconversion and a frequency of 60 samples h(-1), with detection and quantification limits of 0.50 and 1.66µmol L(-1), respectively. Michaelis-Menten parameters (Vmax and KM) were calculated as 449±47.7nmol min(-1) and 7.79±0.98mmol. Statistical evaluations were done to validate the proposed methodology. The content of glucose in natural and commercial coconut water samples was evaluated using the developed method. Comparison with spectrophotometric measurements showed that both methodologies have a very good correlation (tcalculated, 0.05, 4=1.35

Surface enhanced Raman scattering spot tests: a new insight on Feigl's analysis using gold nanoparticles.

Traditional Feigl's spot tests can be greatly improved with the aid of gold nanoparticles and Raman probes, by monitoring the changes in the surface enhanced Raman scattering (SERS) of the analytes directly applied on a filter paper previously impregnated with the selective organic reagent. As a proof of concept, diphenylthiocarbazone (dithizone) was treated with citrate stabilized gold nanoparticles and employed in paper spot tests for a variety of transition and heavy metal ions. Below 10(-5) mol L(-1), only mercury(II) ions were able to displace the dithizone molecules from the "coordination shell" of the gold nanoparticles, leading to a systematic decay of the Raman signals. Because of the huge enhancement of the dithizone vibrational peaks, the SERS spot tests allowed the detection of picograms of Hg(2+) ions.