RESUMO
Photoluminescence blinking behavior from single quantum dots under steady illumination is an important but controversial topic. Its occurrence has impeded the use of single quantum dots in bioimaging. Different mechanisms have been proposed to account for it, although controversial, the most important of which is the non-radiative Auger recombination mechanism whereby photocharging of quantum dots can lead to the blinking phenomenon. Here, the singly charged trion, which maintains photon emission, including radiative recombination and non-radiative Auger recombination, leads to fluorescence non-blinking which is observed in photocharged single graphene quantum dots (GQDs). This phenomenon can be explained in terms of different energy levels in the GQDs, caused by various oxygen-containing functional groups in the single GQDs. The suppressed blinking is due to the filling of trap sites owing to a Coulomb blockade. These results provide a profound understanding of the special optical properties of GQDs, affording a reference for further in-depth research.
RESUMO
Crystalline calcium aluminates are a critical setting agent in cement. To date, few have explored the microscopic and dynamic mechanism of the transitions from molten aluminate liquids, through the supercooled state to glassy and crystalline phases, during cement clinker production. Herein, the first in situ measurements of viscosity and density are reported across all the principal molten phases, relevant to their eventual crystalline structures. Bulk atomistic computer simulations confirm that thermophysical properties scale with the evolution of network substructures interpenetrating melts on the nanoscale. It is demonstrated that the glass transition temperature (T g) follows the eutectic profile of the liquidus temperature (T m), coinciding with the melting zone in cement production. The viscosity has been uniquely charted over 14 decades for each calcium-aluminate phase, projecting and justifying the different temperature zones used in cement manufacture. The fragile-strong phase transitions are revealed across all supercooled phases coinciding with heterogeneous nucleation close to 1.2T g, where sintering and quenching occur in industrial-scale cement processing.
RESUMO
Melting presents one of the most prominent phenomena in condensed matter science. Its microscopic understanding, however, is still fragmented, ranging from simplistic theory to the observation of melting point depressions. Here, a multimethod experimental approach is combined with computational simulation to study the microscopic mechanism of melting between these two extremes. Crystalline structures are exploited in which melting occurs into a metastable liquid close to its glass transition temperature. The associated sluggish dynamics concur with real-time observation of homogeneous melting. In-depth information on the structural signature is obtained from various independent spectroscopic and scattering methods, revealing a step-wise nature of the transition before reaching the liquid state. A kinetic model is derived in which the first reaction step is promoted by local instability events, and the second is driven by diffusive mobility. Computational simulation provides further confirmation for the sequential reaction steps and for the details of the associated structural dynamics. The successful quantitative modeling of the low-temperature decelerated melting of zeolite crystals, reconciling homogeneous with heterogeneous processes, should serve as a platform for understanding the inherent instability of other zeolitic structures, as well as the prolific and more complex nanoporous metal-organic frameworks.
RESUMO
Glass-forming ability (GFA) is the ability of a liquid to avoid crystallization during cooling. Metal-organic frameworks (MOFs) are a new class of glass formers (1-3), with hitherto unknown dynamic and thermodynamic properties. We report the discovery of a new series of tetrahedral glass systems, zeolitic imidazolate framework-62 (ZIF-62) [Zn(Im2-x bIm x )], which have ultrahigh GFA, superior to any other known glass formers. This ultrahigh GFA is evidenced by a high viscosity η (105 Pa·s) at the melting temperature Tm, a large crystal-glass network density deficit (Δρ/ρg)network, no crystallization in supercooled region on laboratory time scales, a low fragility (m = 23), an extremely high Poisson's ratio (ν = 0.45), and the highest Tg/Tm ratio (0.84) ever reported. Tm and Tg both increase with benzimidazolate (bIm) content but retain the same ultrahigh Tg/Tm ratio, owing to high steric hindrance and frustrated network dynamics and also to the unusually low enthalpy and entropy typical of the soft and flexible nature of MOFs. On the basis of these versatile properties, we explain the exceptional GFA of the ZIF-62 system.
RESUMO
Pt nanoparticles decorated with rose-like Bi2O2CO3 configurations were synthesized via a simple photoreduction method at room temperature. The structure, morphology, optical and electronic properties, and photocatalytic performance of the as-prepared materials were characterized. Compared to pure Bi2O2CO3, the Pt/Bi2O2CO3 photocatalysts show better performance in decomposing RhB, BPA and OTC under visible light (λ > 420 nm). The enhanced photocatalytic activity of Pt/Bi2O2CO3 could be attributed to the modification in light absorption (λ > 420 nm) charge migration and the separation of photo-generated electrons (e-) and holes (h+). Free radical trapping experiments demonstrated that the main active species of the catalytic reaction are different in decomposing RhB and BPA.
RESUMO
Bioactive glass ionomer cements (GICs) have been in widespread use for â¼40 years in dentistry and medicine. However, these composites fall short of the toughness needed for permanent implants. Significant impediment to improvement has been the requisite use of conventional destructive mechanical testing, which is necessarily retrospective. Here we show quantitatively, through the novel use of calorimetry, terahertz (THz) spectroscopy and neutron scattering, how GIC's developing fracture toughness during setting is related to interfacial THz dynamics, changing atomic cohesion and fluctuating interfacial configurations. Contrary to convention, we find setting is non-monotonic, characterized by abrupt features not previously detected, including a glass-polymer coupling point, an early setting point, where decreasing toughness unexpectedly recovers, followed by stress-induced weakening of interfaces. Subsequently, toughness declines asymptotically to long-term fracture test values. We expect the insight afforded by these in situ non-destructive techniques will assist in raising understanding of the setting mechanisms and associated dynamics of cementitious materials.
Assuntos
Cimentos de Ionômeros de Vidro , Teste de Materiais , Fenômenos Mecânicos , Calorimetria , Estresse Mecânico , Espectroscopia Terahertz , VibraçãoRESUMO
Hybrid glasses connect the emerging field of metal-organic frameworks (MOFs) with the glass formation, amorphization and melting processes of these chemically versatile systems. Though inorganic zeolites collapse around the glass transition and melt at higher temperatures, the relationship between amorphization and melting has so far not been investigated. Here we show how heating MOFs of zeolitic topology first results in a low density 'perfect' glass, similar to those formed in ice, silicon and disaccharides. This order-order transition leads to a super-strong liquid of low fragility that dynamically controls collapse, before a subsequent order-disorder transition, which creates a more fragile high-density liquid. After crystallization to a dense phase, which can be remelted, subsequent quenching results in a bulk glass, virtually identical to the high-density phase. We provide evidence that the wide-ranging melting temperatures of zeolitic MOFs are related to their network topologies and opens up the possibility of 'melt-casting' MOF glasses.
RESUMO
We examine the route of structural collapse and re-crystallization of faujasite-type (Na,K)-LSX zeolite. As the first step, a rather stable amorphous high density phase HDAcollapse is generated through an order-disorder transition from the original zeolite via a low density phase LDAcollapse, at around 790 °C. We find that the overall amorphization is driven by an increase in the bond angle distribution within T-O-T and a change in ring statistics to 6-membered TO4 (T = Si(4+), Al(3+)) rings at the expense of 4-membered rings. The HDAamorph transforms into crystalline nepheline, though, through an intermediate metastable carnegieite phase. In comparison, the melt-derived glass of similar composition, HDAMQ, crystallizes directly into the nepheline phase without the occurrence of intermediate carnegieite. This is attributed to the higher structural order of the faujasite-derived HDAcollapse which prefers the re-crystallization into the highly symmetric carnegieite phase before transformation into nepheline with lower symmetry.
RESUMO
The nanostructured Ce ion substituted cryptomelane-type octahedral molecular sieve (OMS-2) catalyst exhibits strong absorption in the entire solar spectrum region. The Ce ion substituted OMS-2 catalyst can efficiently transform the absorbed solar energy to thermal energy, resulting in a considerable increase of temperature. By combining the efficient photothermal conversion and thermocatalytic activity of the Ce ion substituted OMS-2 catalyst, we carried out full solar spectrum, visible-infrared, and infrared light driven catalysis with extremely high efficiency. Under the irradiation of full solar spectrum, visible-infrared, and infrared light, the Ce ion substituted OMS-2 catalyst exhibits extremely high catalytic activity and excellent durability for the oxidation of volatile organic pollutants such as benzene, toluene, and acetone. Based on the experimental evidence, we propose a novel mechanism of solar light driven thermocatalysis for the Ce ion substituted OMS-2 catalyst. The reason why the Ce ion substituted OMS-2 catalyst exhibits much higher catalytic activity than pure OMS-2 and CeO2/OMS-2 nano composite under the full solar spectrum irradiation is discussed.
RESUMO
This article explores Poisson's ratio, starting with the controversy concerning its magnitude and uniqueness in the context of the molecular and continuum hypotheses competing in the development of elasticity theory in the nineteenth century, moving on to its place in the development of materials science and engineering in the twentieth century, and concluding with its recent re-emergence as a universal metric for the mechanical performance of materials on any length scale. During these episodes France lost its scientific pre-eminence as paradigms switched from mathematical to observational, and accurate experiments became the prerequisite for scientific advance. The emergence of the engineering of metals followed, and subsequently the invention of composites-both somewhat separated from the discovery of quantum mechanics and crystallography, and illustrating the bifurcation of technology and science. Nowadays disciplines are reconnecting in the face of new scientific demands. During the past two centuries, though, the shape versus volume concept embedded in Poisson's ratio has remained invariant, but its application has exploded from its origins in describing the elastic response of solids and liquids, into areas such as materials with negative Poisson's ratio, brittleness, glass formation, and a re-evaluation of traditional materials. Moreover, the two contentious hypotheses have been reconciled in their complementarity within the hierarchical structure of materials and through computational modelling.
RESUMO
The phenomenology of zeolite collapse is outlined, drawing on recent synchrotron x-ray diffraction experiments and computer simulations of low density cage structures like zeolite A and zeolite Y. Attention is drawn to the importance of polyamorphism in destabilizing this type of microporous crystal and its role in order-disorder as well as amorphous-amorphous transitions, together with associated differences in entropy and density between polyamorphic phases and the precursor zeolite. Magic angle spinning NMR and inelastic x-ray scattering are used to highlight changes in structural order and mechanical rigidity between the starting zeolite and the final high density polyamorph. In conclusion, two-level systems detected with inelastic neutron scattering are described and their involvement in dictating the dynamics of the collapse of zeolitic cage structures.
RESUMO
The glass-forming reactions between sodium carbonate (Na2CO3) and silica (SiO2) have been investigated by 23Na, 29Si, and 13C magic-angle spinning (MAS) NMR spectroscopy. The multinuclear MAS NMR approach identifies and quantifies reaction products and intermediates, both glassy and crystalline. A series of powdered batches of initial composition Na2CO3.xSiO2 (x = 1, 2) corresponding to a sodium metasilicate (Na2SiO3) and sodium disilicate (Na2Si2O5) stoichiometry were investigated after periods of isothermal and nonisothermal heat treatments at different temperatures. Analysis of the 23Na quadrupolar coupling parameters has identified the early reaction product in all cases as crystalline Na2SiO3. In the nonisothermal experiment, this reaction is preceded by an early silica-rich melt phase formed around 850 degrees C. The early reactions are controlled by solid-state Na+ diffusion across the reaction zone in the grain interface layer. Crystalline Na2SiO3 precipitates in the interface layer, increasing its thickness between the Na2CO3 and the SiO2 grains and slowing down the rate of Na+ migration. This creates a secondary phase, which is temperature dependent. At low temperatures, where Na+ migration is impaired, the production of Na2SiO3 ceases and silica-richer phases are precipitated. In the case of the sodium disilicate batch, where excess SiO2 is present, a secondary reaction of Na2SiO3 with SiO2 forming a glassy phase is observed. A transient carbon-bearing phase has been identified by 13C NMR as a NaCO3- complex loosely bound to bridging oxygens in the silicate network at the SiO2 grain surface.
RESUMO
Time-resolved in situ SAXS and XAS measurements were carried out to monitor the formation of nanoparticles of the sulfides of cadmium and zinc, from solutions containing he corresponding acetate, and thioacetamide under solvothermal conditions. Analysis of the SAXS data shows that particles of ca 5 nm in radius form within the first few minutes of the reaction and then grow uniformly to ca 20 nm over a period of two hours resulting in a highly mono-dispersed particle distribution. EXAFS data of the CdS particles also prepared by solvothermal methods and recorded at 20 K, support the formation of nano-meter sized particles.