Zwitterionic Copolymers for Anti-Scaling Applications in Simulated Spaceflight Wastewater Scenarios.

Water reclamation in spaceflight applications, such as those encountered on the International Space Station (ISS), requires complex engineering solutions to ensure maximum water recovery. Current vapor compression distillation (VCD) technologies are effective but produce highly concentrated brines and often cause scaling within a separation system. This work evaluates initial steps toward integrating pervaporation, a membrane separation process, as a brine management strategy for ISS wastewaters. Pervaporation performs separations driven by a chemical potential difference across the membrane created by either a sweep gas or a vacuum pull. Pervaporation membranes, as with most membrane processes, can be subject to scaling. Therefore, this work studies the anti-scaling properties of zwitterions (polymeric molecules with covalently tethered positive and negative ions) coated onto sulfonated pentablock terpolymer block polymer (Nexar) pervaporation membrane surfaces. We report a method for applying zwitterions to the surface of pervaporation membranes and the effect on performance parameters such as flux and scaling resistance. Membranes with zwitterions had up to 53% reduction in permeance but reduced scaling. The highest amount of scaling occurred in the samples exposed to calcium chloride, and uncoated membranes had weight percent increases as high as 1617 ± 241%, whereas zwitterion-coated membranes experienced only about 317 ± 87% weight increase in the presence of the same scalant.

Long transients and dendritic network structure affect spatial predator-prey dynamics in experimental microcosms.

Spatial dynamics can promote persistence of strongly interacting predators and prey. Theory predicts that spatial predator-prey systems are prone to long transients, meaning that the dynamics leading to persistence or extinction manifest over hundreds of generations. Furthermore, the form and duration of transients may be altered by spatial network structure. Few empirical studies have examined the importance of transients in spatial food webs, especially in a network context, due to the difficulty in collecting the large scale and long-term data required. We examined predator-prey dynamics in protist microcosms using three experimental spatial structures: isolated, river-like dendritic networks and regular lattice networks. Densities and patterns of occupancy were followed for both predators and prey over a time scale that equates to >100 predator and >500 prey generations. We found that predators persisted in dendritic and lattice networks whereas they went extinct in the isolated treatment. The dynamics leading to predator persistence played out over long transients with three distinct phases. The transient phases showed differences between dendritic and lattice structures, as did underlying patterns of occupancy. Spatial dynamics differed among organisms in different trophic positions. Predators showed higher local persistence in more connected bottles while prey showed this in more spatially isolated ones. Predictions based on spatial patterns of connectivity derived from metapopulation theory explained predator occupancy, while prey occupancy was better explained by predator occupancy. Our results strongly support the hypothesized role of spatial dynamics in promoting persistence in food webs, but that the dynamics ultimately leading to persistence may occur with long transients which in turn may be influenced by spatial network structure and trophic interactions.

KCa3.1 potentiation stimulates Cl- secretion in F508del and G551D CFTR-corrected primary human bronchial epithelial cells.

We previously identified potentiators of KCa3.1 (5,6-dichloro-1-ethyl-1,3-dihydro-2H-benzimidazol-2-one; DCEBIO) that stimulate Cl- secretion across human bronchial epithelial cells (HBEs) expressing wild-type (WT) cystic fibrosis transmembrane conductance regulator (CFTR). However, these compounds failed to stimulate Cl- secretion in F508del CFTR HBEs. Drug discovery efforts identified CFTR potentiators (VX-770) and correctors (VX-445, VX-661) for cystic fibrosis (CF) disease-causing mutations, including F508del and G551D. Herein, we evaluated the effect of KCa3.1 potentiation on Cl- equivalent current (ICl) across primary HBEs expressing WT, F508del, and G551D CFTR. Transepithelial impedance analysis was used to obtain estimates of apical (Ra) and basolateral membrane (BLM; Rb) resistances. In WT CFTR HBEs, DCEBIO stimulated ICl, which was increased by forskolin. Similarly, forskolin stimulated ICl, and this was increased by DCEBIO. The KCa3.1 blocker, TRAM-34 inhibited ICl. DCEBIO decreased Rb, whereas TRAM-34 increased Rb, consistent with BLM localization of KCa3.1. Following correction of F508del CFTR with VX-445 + VX-661, DCEBIO failed to stimulate ICl, although the subsequent addition of forskolin + VX-770 increased ICl. Importantly, following stimulation of ICl with forskolin + VX-770, DCEBIO induced a further significant increase in ICl. As above, DCEBIO reduced Rb, whereas TRAM-34 increased Rb, consistent with BLM localized KCa3.1. Finally, we assessed KCa3.1 potentiation on ICl in G551D/F508del CFTR HBEs in the absence or presence of VX-445 + VX-661. In both cases, DCEBIO failed to stimulate ICl. However, following stimulation with forskolin + VX-770, DCEBIO nearly doubled ICl. Our results demonstrate that following correction/potentiation of F508del and G551D CFTR, potentiation of KCa3.1 increases the Cl- secretory response, suggesting this class of compounds may represent a novel means of further increasing Cl- secretion across CF airway.

Migration of retained tarsal bee stinger onto the ocular surface causing superficial keratopathy.

We report a case of keratopathy due to retained stinger elements following a bee sting and envenomation of the ocular adnexa. A 48-year-old woman presented with a 2-day history of right-sided eye pain, photophobia, and reduced visual acuity. Six days prior to presentation, she had been stung on the right upper eyelid by a bee. Her usual practitioner had removed the stinger and commenced a course of oral antibiotics. Anterior segment examination revealed coarse linear abrasions and superficial punctate keratitis with associated epithelial edema. Eversion of the right upper eyelid revealed the presence of retained stinger lancets near the medial eyelid margin. The retained stinger was removed, and the patient responded well to treatment with topical antibiotics, steroids, and cycloplegia.

Covalently integrated silica nanoparticles in poly(ethylene glycol)-based acrylate resins: thermomechanical, swelling, and morphological behavior.

Nanocomposites integrate functional nanofillers into viscoelastic matrices for electronics, lightweight structural materials, and tissue engineering. Herein, the effect of methacrylate-functionalized (MA-SiO2) and vinyl-functionalized (V-SiO2) silica nanoparticles on the thermal, mechanical, physical, and morphological characteristics of poly(ethylene glycol) (PEG) nanocomposites was investigated. The gel fraction of V-SiO2 composites decreases upon addition of 3.8 wt% but increases with further addition (>7.4 wt%) until it reaches a plateau at 10.7 wt%. The MA-SiO2 induced no significant changes in gel fraction and both V-SiO2 and MA-SiO2 nanoparticles had a negligible impact on the nanocomposite glass transition temperature and water absorption. The Young's modulus and ultimate compressive stress increased with increasing nanoparticle concentration for both nanoparticles. Due to the higher crosslink density, MA-SiO2 composites reached a maximum mechanical stress at a concentration of 7.4 wt%, while V-SiO2 composites reached a maximum at a concentration of 10.7 wt%. Scanning electron microscopy, transmission electron microscopy, and small-angle X-ray scattering revealed a bimodal size distribution for V-SiO2 and a monomodal size distribution for MA-SiO2. Although aggregates were observed for both nanoparticle surface treatments, V-SiO2 dispersion was poor while MA-SiO2 were generally well-dispersed. These findings lay the framework for silica nanofillers in PEG-based nanocomposites for advanced manufacturing applications.

The influence of spacer composition on thermomechanical properties, crystallinity, and morphology in ionene segmented copolymers.

A series of segmented ammonium ionenes with varying weight fractions of 2000 g mol-1 poly(ethylene glycol) (PEG) or poly(tetramethylene oxide) (PTMO) soft segments were synthesized, and a simplified coarse-grained model of these materials was implemented using molecular dynamics simulations. In addition to varying soft segment type (PTMO vs. PEG), charge density and soft segment content were varied to create a comprehensive series of segmented ammonium ionenes; thermogravimetric analysis reveals that all segmented ionenes in the series are thermally stable up to 240 °C. Differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) show the formation of phase separated microdomains at low soft segment content. In particular, DSC shows that the hard and soft domains have distinct glass transition temperatures. Similarly, simulations show that reduced soft segment content induces stronger microphase separation, reduces soft segment mobility, and increases ionic aggregate connectivity and size. These increased ionic associations result in elastomeric behavior, as evidenced by the higher rubbery plateau moduli observed at lower soft segment contents through DMA. Moreover, simulations show that ionic aggregation increases when switching from PEG to the less polar PTMO repeat units, which is consistent with DMA results showing higher plateau moduli for PTMO-based ionenes relative to PEG ionenes. DSC and X-ray diffraction determined that the degree of crystallinity increased with soft segment content regardless of segment type. Overall, these results suggest a semi-crystalline microphase-separated morphology strongly influenced by charge density, the degree of ionic aggregation, and the resulting level of confinement and mobility of the soft segments.

Thermodynamic interference with bile acid demicelleization reduces systemic entry and injury during cholestasis.

Bile acids (BA), with their large hydrophobic steroid nucleus and polar groups are amphipathic molecules. In bile, these exist as micelles above their critical micellar concentration (CMC). In blood at low concentrations, these exist as monomers, initiating cellular signals. This micellar to monomer transition may involve complex thermodynamic interactions between bile salts alone or with phospholipids, i.e. mixed micelles and the aqueous environment. We therefore went on to test if therapeutically relevant changes in temperature could influence micellar behavior of bile salts, and in turn whether this affected the biological responses in cells, and in vivo. Sodium taurocholate (STC) belongs to a major class of bile salts. STC has a CMC in the 5-8 mM range and its infusion into the pancreatic duct is commonly used to study pancreatitis. We thus studied micellar breakdown of STC using isothermal titration calorimetry (ITC), dynamic light scattering and cryogenic transmission electron microscopy. Under conditions relevant to the in vivo environment (pH 7.4, Na 0.15 M), ITC showed STC to have a U shaped reduction in micellar breakdown between 37 °C and 15 °C with a nadir at 25 °C approaching ≈90% inhibition. This temperature dependence paralleled pancreatic acinar injury induced by monomeric STC. Mixed micelles of STC and 1-palmitoyl, 2-oleyl phosphatidylcholine, a phospholipid present in high proportions in bile, behaved similarly, with ≈75% reduction in micellar breakdown at 25 °C compared to 37 °C. In vivo pancreatic cooling to 25 °C reduced the increase in circulating BAs after infusion of 120 mM (5%) STC into the pancreatic duct, and duct ligation. Lower BA levels were associated with improved cardiac function, reduced myocardial damage, shock, lung injury and improved survival independent of pancreatic injury. Thus micellar breakdown of bile salts is essential for their entry into the systemic circulation, and thermodynamic interference with this may reduce their systemic entry and consequent injury during cholestasis, such as from biliary pancreatitis.

Oxide-Mediated Formation of Chemically Stable Tungsten-Liquid Metal Mixtures for Enhanced Thermal Interfaces.

Modern microelectronics and emerging technologies such as wearable devices and soft robotics require conformable and thermally conductive thermal interface materials to improve their performance and longevity. Gallium-based liquid metals (LMs) are promising candidates for these applications yet are limited by their moderate thermal conductivity, difficulty in surface-spreading, and pump-out issues. Incorporation of metallic particles into the LM can address these problems, but observed alloying processes shift the LM melting point and lead to undesirable formation of additional surface roughness. Here, these problems are addressed by introducing a mixture of tungsten microparticles dispersed within a LM matrix (LM-W) that exhibits two- to threefold enhanced thermal conductivity (62 ± 2.28 W m-1 K-1 for gallium and 57 ± 2.08 W m-1 K-1 for EGaInSn at a 40% filler volume mixing ratio) and liquid-to-paste transition for better surface application. It is shown that the formation of a nanometer-scale LM oxide in oxygen-rich environments allows highly nonwetting tungsten particles to mix into LMs. Using in situ imaging and particle dipping experimentation within a focused ion beam and scanning electron microscopy system, the oxide-assisted mechanism behind this wetting process is revealed. Furthermore, since tungsten does not undergo room-temperature alloying with gallium, it is shown that LM-W remains a chemically stable mixture.

Chemical and physical changes of microplastics during sterilization by chlorination.

Wastewater treatment plants are known to release microplastics that have been detected in aquatic and terrestrial organisms constituting part of the human diet. Chlorination of wastewater-borne microplastics was hypothesized to induce chemical and physical changes detectable by Raman spectroscopy and differential scanning calorimetry (DSC). In the laboratory, virgin plastics (∼0.05 × 2 × 2 mm) were exposed to differing sterilization conditions representative of dosages used in the disinfection of drinking water, wastewater, and heavily contaminated surfaces. Polypropylene (PP) was most resistant to chlorination, followed by high density polyethylene (HDPE) and polystyrene (PS). Polystyrene showed degradation, indicated by changes in Raman peak widths, at concentration-time regimes (CT values) as low as 75 mg min/L, whereas HDPE and PP remained unaltered even at chlorine doses characteristic of wastewater disinfection (150 mg min/L). However, HDPE and PS were not completely resistant to oxidative attack by chlorination. Under extremely harsh conditions, shifts in Raman peaks and the formation of new bonds were observed. These results show that plastics commonly used in consumer products can be chemically altered, some even under conditions prevailing during wastewater treatment. Changes in polymer properties, observed for HDPE and PP under extreme exposure conditions only, are predicted to alter the risk microplastics pose to aquatic and terrestrial biota, since an increase in carbon-chlorine (C-Cl) bonds is known to increase toxicity, rendering the polymers more hydrophobic and thus more prone to adsorb, accumulate, and transport harmful persistent pollutants to biota in both aquatic and terrestrial environments.

Anomalous isoelectronic chalcogen rejection in 2D anisotropic vdW TiS3(1-x)Se3x trichalcogenides.

Alloying in semiconductors has enabled many civilian technologies in electronics, optoelectronics, photonics, and others. While the alloying phenomenon is well established in traditional bulk semiconductors owing to a vast array of available ternary phase diagrams, alloying in 2D materials still remains at its seminal stages. This is especially true for transition metal trichalcogenides (TMTCs) such as TiS3 which has been recently predicted to be a direct gap, high carrier mobility, pseudo-1D semiconductor. In this work, we report on an unusual alloying rejection behavior in TiS3(1-x)Se3x vdW crystals. TEM, SEM, EDS, and angle-resolved Raman measurements show that only a miniscule amount (8%) of selenium can be successfully alloyed into a TiS3 host matrix despite vastly different precursor amounts as well as growth temperatures. This unusual behavior contrasts with other vdW systems such as TiS2(1-x)Se2x, MoS2(1-x)Se2x, Mo1-xWxS2, WS2(1-x)Se2x, where continuous alloying can be attained. Angle-resolved Raman and kelvin probe force microscopy measurements offer insights into how selenium alloying influences in-plane structural anisotropy as well as electron affinity values of exfoliated sheets. Our cluster expansion theory calculations show that only the alloys with a small amount of Se can be attained due to energetic instability above/below a certain selenium concentration threshold in the ternary phase diagrams. The overall findings highlight potential challenges in achieving stable Ti based TMTCs alloys.

Effect of Crosslinker Length and Architecture on the Thermomechanical Properties of CNT-Loaded Elastomeric Polymer Matrix Composites.

An evolving understanding of elastomeric polymer nanocomposites continues to expand commercial, defense, and industrial products and applications. This work explores the thermomechanical properties of elastomeric nanocomposites prepared from bisphenol A diglycidyl ether and three amine-terminated poly(propylene oxides) (Jeffamines). The Jeffamines investigated include difunctional crosslinkers with molecular weights of 2000 and 4000 g mol-1 and a trifunctional crosslinker with a molecular weight of 3000 g mol-1 . Additionally, carbon nanotubes (CNTs) are added, up to 1.25 wt%, to each thermoset. The findings indicate that the T g and storage modulus of the polymer nanocomposites can be controlled independently within narrow concentration windows, and that effects observed following CNT incorporation are dependent on the crosslinker molecular weight. Finally, the impact of crosslinker length and architecture as well as CNT addition on the molecular weight between crosslink points in the glassy and rubbery states are discussed.

Meta-analysis of ionic liquid literature and toxicology.

A meta-analysis was conducted to compare the total amount of ionic liquid (IL) literature (n = 39,036) to the body of publications dealing with IL toxicity (n = 213) with the goal of establishing the state of knowledge and existing information gaps. Additionally, patent literature pertaining to issued patents utilizing ILs (n = 3358) or dealing with IL toxicity (n = 112) were analyzed. Total publishing activity and patent count served to gauge research activity, industrial usage and toxicology knowledge of ILs. Five of the most commonly studied IL cations were identified and used to establish a relationship between toxicity data and potential of commercial use: imidazolium, ammonium, phosphonium, pyridinium, and pyrrolidinium. Toxicology publications for all IL cations represented 0.55% ± 0.27% of the total publishing activity; compared with other industrial chemicals, these numbers indicate that there is still a paucity of studies on the adverse effects of this class of chemical. Toxicity studies on ILs were dominated by the use of in vitro models (18%) and marine bacteria (15%) as studied biological systems. Whole animal studies (n = 87) comprised 31% of IL toxicity studies, with a subset of in vivo mammalian models consisting of 8%. Human toxicology data were found to be limited to in vitro analyses, indicating substantial knowledge gaps. Risks from long-term and chronic low-level exposure to ILs have not been established yet for any model organisms, reemphasizing the need to fill crucial knowledge gaps concerning human health effects and the environmental safety of ILs. Adding to the existing knowledge of the molecular toxicity characteristics of ILs can help inform the design of greener, less toxic and more benign IL technologies.

Light-mediated activation of siRNA Release in diblock copolymer assemblies for controlled gene silencing.

Controllable release is particularly important for the delivery of small interfering RNA (siRNA), as siRNAs have a high susceptibility to enzymatic degradation if release is premature, yet lack silencing activity if they remain inaccessible within the cytoplasm. To overcome these hurdles, novel and tailorable mPEG-b-poly(5-(3-(amino)propoxy)-2-nitrobenzyl methacrylate) (mPEG-b-P(APNBMA)) diblock copolymers containing light-sensitive o-nitrobenzyl moieties and pendant amines are employed to provide both efficient siRNA binding, via electrostatic and hydrophobic interactions, as well as triggered charge reversal and nucleic acid release. In particular, siRNA/mPEG-b-P(APNBMA)23.6 polyplexes show minimal aggregation in physiological salt and serum, and enhanced resistance to polyanion-induced unpackaging compared to polyethylenimine preparations. Cellular delivery of siRNA/mPEG-b-P(APNBMA)23.6 polyplexes reveals greater than 80% cellular transfection, as well as rapid and widespread cytoplasmic distribution. Additionally, UV irradiation indicates ≈70% reduction in targeted gene expression following siRNA/mPEG-b-P(APNBMA)23.6 polyplex treatment, as compared to 0% reduction in polyplex-treated cells without UV irradiation, and only ≈30% reduction for Lipofectamine-treated cells. The results here highlight the potential of these light-sensitive copolymers with a well-defined on/off switch for applications including cellular patterning for guided cell growth and extension, and cellular microarrays for exploring protein and drug interactions that require enhanced spatiotemporal control of gene activation.

Thoracic Spinal Cord Stimulation for Heart Failure as a Restorative Treatment (SCS HEART study): first-in-man experience.

BACKGROUND: Preclinical studies suggest that neuromodulation with thoracic spinal cord stimulation (SCS) improves left ventricular (LV) function and remodeling in systolic heart failure (HF). OBJECTIVE: The purpose of this study was to evaluate the safety and efficacy of a SCS system for the treatment of systolic HF. METHODS: We performed a prospective, multicenter pilot trial in patients with New York Heart Association (NYHA) class III HF, left ventricular ejection fraction (LVEF) 20%-35%, and implanted defibrillator device who were prescribed stable optimal medical therapy. Dual thoracic SCS leads were used at the T1-T3 level. The device was programmed to provide SCS for 24 hours per day (50 Hz at pulse width 200 µs). RESULTS: We enrolled 22 patients from 5 centers:17 patients underwent implantation of a SCS device and 4 patients who did not fulfill the study criteria served as nontreated controls. No deaths or device-device interactions were noted during the 6-month period in the 17 SCS-treated patients. Fifteen of 17 completed the efficacy endpoint assessments: composite score improved by 4.2 ± 1.3, and 11 patients (73%) showed improvement in ≥4 of 6 efficacy parameters. There was significant improvement in NYHA class (3.0 vs 2.1, P = .002; 13/17 improved); Minnesota Living with Heart Failure Questionnaire (42 ± 26 vs 27 ± 22, P = .026; 12/17 improved); peak maximum oxygen consumption (14.6 ± 3.3 vs 16.5 ± 3.9 mL/kg/min, P = .013; 10/15 improved); LVEF (25% ± 6% vs 37% ± 8%, P<.001; 14/16 improved); and LV end-systolic volume (174 ± 57 vs 137 ± 37 mL, P = .002; 11/16 improved) but not in N-terminal prohormone brain natriuretic peptide. No such improvements were observed in the 4 nontreated patients. CONCLUSION: The results of this first-in-human trial suggest that high thoracic SCS is safe and feasible and potentially can improve symptoms, functional status, and LV function and remodeling in patients with severe, symptomatic systolic HF.

Catch and Release: Photocleavable Cationic Diblock Copolymers as a Potential Platform for Nucleic Acid Delivery.

Binding interactions between DNA and cationic carriers must be sufficiently strong to prevent nuclease-mediated degradation, yet weak enough to permit transcription. We demonstrate cationic diblock copolymers containing PEG and o-nitrobenzyl moieties that facilitated tailorable DNA complexation and light-activated release. This design unlocks a new approach to advance non-viral gene packaging.

Phosphonium-containing polyelectrolytes for nonviral gene delivery.

Nonviral gene therapy focuses intensely on nitrogen-containing macromolecules and lipids to condense and deliver DNA as a therapeutic for genetic human diseases. For the first time, DNA binding and gene transfection experiments compared phosphonium-containing macromolecules with their respective ammonium analogs. Conventional free radical polymerization of quaternized 4-vinylbenzyl chloride monomers afforded phosphonium- and ammonium-containing homopolymers for gene transfection experiments of HeLa cells. Aqueous size exclusion chromatography confirmed similar absolute molecular weights for all polyelectrolytes. DNA gel shift assays and luciferase expression assays revealed phosphonium-containing polymers bound DNA at lower charge ratios and displayed improved luciferase expression relative to the ammonium analogs. The triethyl-based vectors for both cations failed to transfect HeLa cells, whereas tributyl-based vectors successfully transfected HeLa cells similar to Superfect demonstrating the influence of the alkyl substituent lengths on the efficacy of the gene delivery vehicle. Cellular uptake of Cy5-labeled DNA highlighted successful cellular uptake of triethyl-based polyplexes, showing that intracellular mechanisms presumably prevented luciferase expression. Endocytic inhibition studies using genistein, methyl ß-cyclodextrin, or amantadine demonstrated the caveolae-mediated pathway as the preferred cellular uptake mechanism for the delivery vehicles examined. Our studies demonstrated that changing the polymeric cation from ammonium to phosphonium enables an unexplored array of synthetic vectors for enhanced DNA binding and transfection that may transform the field of nonviral gene delivery.

Thermal, rheological, and ion-transport properties of phosphonium-based ionic liquids.

Phosphonium-based ionic liquids with varying counteranions from commercially available ionic liquid precursors enabled tunable viscosity, ionic conductivity, and thermal stability. Thermogravimetric analysis revealed a relationship between thermal stability and anion composition where anions with lower basicity remained stable to higher temperatures. Determination of glass transition temperatures and melting temperatures using differential scanning calorimetry revealed supercooling, crystallization, and dependence on anion composition. Rheological and ionic conductivity measurements determined the temperature-dependence of the viscosity and ionic conductivity of the phosphonium-based ionic liquids. Arrhenius analyses of conductivity and viscosity provided activation energies, which showed a decrease toward larger, more delocalized anions. An assessment according to the Walden plot displayed their efficacy relative to other ionic liquids.

Tailoring charge density and hydrogen bonding of imidazolium copolymers for efficient gene delivery.

Conventional free radical polymerization with subsequent postpolymerization modification afforded imidazolium copolymers with controlled charge density and side chain hydroxyl number. Novel imidazolium-containing copolymers where each permanent cation contained one or two adjacent hydroxyls allowed precise structure-transfection efficiency studies. The degree of polymerization was identical for all copolymers to eliminate the influence of molecular weight on transfection efficiency. DNA binding, cytotoxicity, and in vitro gene transfection in African green monkey COS-7 cells revealed structure-property-transfection relationships for the copolymers. DNA gel shift assays indicated that higher charge densities and hydroxyl concentrations increased DNA binding. As the charge density of the copolymers increased, toxicity of the copolymers also increased; however, as hydroxyl concentration increased, cytotoxicity remained constant. Changing both charge density and hydroxyl levels in a systematic fashion revealed a dramatic influence on transfection efficiency. Dynamic light scattering of the polyplexes, which were composed of copolymer concentrations required for the highest luciferase expression, showed an intermediate DNA-copolymer binding affinity. Our studies supported the conclusion that cationic copolymer binding affinity significantly impacts overall transfection efficiency of DNA delivery vehicles, and the incorporation of hydroxyl sites offers a less toxic and effective alternative to more conventional highly charged copolymers.

Influence of polycation molecular weight on poly(2-dimethylaminoethyl methacrylate)-mediated DNA delivery in vitro.

Establishing clear structure-property-transfection relationships is a critical step in the development of clinically relevant polymers for nonviral gene therapy. In this study, we determined the influence of poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) molecular weight on cytotoxicity, DNA binding, and in vitro plasmid DNA delivery efficiency in human brain microvascular endothelial cells (HBMEC). Conventional free radical polymerization was used to synthesize PDMAEMA with weight-average molecular weights ranging from 43,000 to 915,000 g/mol. MTT and LDH assays revealed that lower molecular weight PDMAEMA (M(w) = 43,000 g/mol) was slightly less toxic than higher molecular weights (M(w) > 112,000 g/mol) and that the primary mode of toxicity was cellular membrane destabilization. An electrophoretic gel shift assay revealed that all PDMAEMA molecular weights completely bound with plasmid DNA. However, heparin competitive binding experiments revealed that higher molecular weight PDMAEMA (M(w) = 915,000 g/mol) had a greater binding affinity toward plasmid DNA than lower molecular weight PDMAEMA (M(w) = 43,000 g/mol). The molecular weight of PDMAEMA was found to have a dramatic influence on transfection efficiency, and luciferase reporter gene expression increased as a function of increasing molecular weight. However, cellular uptake of polyplexes was determined to be insensitive to PDMAEMA molecular weight. In addition, our data did not correlate polyplex size with transfection efficiency. Collectively, our data suggested that the intracellular fate of the polyplexes, which involves endosomal release and DNase resistance, is more important to overall transfection efficiency than barriers to entry, such as polyplex size.