RESUMO
We report on an active nanocarrier for chlorhexidine (CHX) based on sterically stabilized shellac nanoparticles (NPs) with dual surface functionalization, which greatly enhances the antimicrobial action of CHX. The fabrication process for the CHX nanocarrier is based on pH-induced co-precipitation of CHX-DG from an aqueous solution of ammonium shellac and Poloxamer 407 (P407), which serves as a steric stabilizing agent. This is followed by further surface modification with octadecyl trimethyl ammonium bromide (ODTAB) through a solvent change to yield cationic surface functionality. In this study, we assessed the encapsulation efficiency and release kinetics of the novel nanocarrier for CHX. We further examined the antimicrobial effects of the CHX nanocarriers and their individual components in order to gain better insight into how they work, to improve their design and to explore the impacts of their dual functionalization. The antimicrobial actions of CHX loaded in shellac NPs were examined on three different proxy microorganisms: a Gram-negative bacterium (E. coli), a yeast (S. cerevisiae) and a microalgae (C. reinhardtii). The antimicrobial actions of free CHX and CHX-loaded shellac NPs were compared over the same CHX concentration range. We found that the non-coated shellac NPs loaded with CHX showed inferior action compared with free CHX due to their negative surface charge; however, the ODTAB-coated, CHX-loaded shellac NPs strongly amplified the antimicrobial action of the CHX for the tested microorganisms. The enhancement of the CHX antimicrobial action was thought to be due to the increased electrostatic adhesion between the cationic surface of the ODTAB-coated, CHX-loaded shellac NPs and the anionic surface of the cell walls of the microorganisms, ensuring direct delivery of CHX with a high concentration locally on the cell membrane. The novel CHX nanocarriers with enhanced antimicrobial action may potentially find applications in dentistry for the development of more efficient formulations against conditions such as gingivitis, periodontitis and other oral infections, as well as enabling formulations to have lower CHX concentrations.
RESUMO
A rapid electrochemical immunoassay method was developed to detect and measure stress biomarkers (cortisol and cortisone) in two biological samples (Zebrafish whole-body and artificial saliva). This methodology utilizes an immunoassay approach taking advantage of the lock and key mechanism that is related to the antibody-antigen interaction depending on the reliable immobilization of the antibody labelled with ferrocene tags (Ab-Fc) on a modified tin-doped indium oxide (ITO) electrode using electrochemical instrumentation to build a POC platform. The limit of detection (LOD) obtained for this biosensor was 1.03 pg ml-1 for cortisol and 0.68 pg ml-1 for cortisone, respectively. The correlation coefficient was 0.9852 and 0.9841 for cortisol and cortisone, respectively with a linear concentration from (0-50 ng ml-1) which covers the standard levels of stress hormones in both selected biological samples. The incubation time was investigated and 30 min was found to be the optimum incubation time. This time would be acceptable for the POC system as total process time can be determined within 35 min.
RESUMO
This proof-of-principle study demonstrates the feasibility of a leaky waveguide (LW) aptasensor, where aptamers were immobilised in a mesoporous chitosan waveguiding film for the detection of thrombin. This work has demonstrated that aptamers immobilised in hydrogels retain their affinity and selectivity towards their target and thus can be used as bioreceptors. The use of antibodies as bioreceptors for sensing thrombin is not viable because it is a serine protease, which will cleave the antibodies. Currently used assays based on clotting time and chromogenic/fluorogenic substrates have limited potential for thrombin measurement in whole blood. Using the initial binding rate over the first 5 min, the limit of detection of our LW aptasensor for thrombin was â¼22 nM. The sensor was tested with spiked serum samples, giving a reading of 46.1 ± 4.6 nM for a sample containing 50 nM thrombin. Our proposed sensor combines the robustness and low cost of aptamers as molecular recognition elements with the simple fabrication process of the chitosan-based leaky waveguide, making LW aptasensors highly attractive for applications in point-of-care diagnostics and healthcare monitoring.
Assuntos
Aptâmeros de Nucleotídeos/química , Técnicas Biossensoriais/métodos , Quitosana/química , Técnicas Eletroquímicas/métodos , Trombina/análise , Estudos de Viabilidade , Humanos , Limite de DetecçãoRESUMO
We report a method where the refractive index increments of an iron storage protein, ferritin, and apoferritin (ferritin minus iron) were measured over the wavelength range of 450-678 nm to determine the average iron content of the protein. The protein used in this study had â¼3375 iron atoms per molecule. The measurement of optical dispersion over the broad wavelength range was enabled by the use of mesoporous leaky waveguides (LWs) made of chitosan. We present a facile approach for fabricating mesoporous chitosan waveguides for improving the measurement sensitivity of macromolecules such as ferritin. Mesoporous materials allow macromolecules to diffuse into the waveguide, maximizing their interaction with the optical mode and thus increasing sensitivity by a factor of â¼9 in comparison to nonporous waveguides. The sensitivity was further improved and selectivity toward ferritin was achieved by the incorporation of antibodies in the waveguide. The method presented in this work is a significant advance over the state of the art method, the enzyme linked immunosorbent assay (ELISA) used in clinics, because it allows determining the average content of ferritin in a single step. The average iron content of ferritin is an important marker for conditions such as injury, inflammation, and infection. Thus, the approach presented here of measuring optical dispersion to determine the average iron content of ferritin has a significant potential to improve the point of care analysis of the protein for disease diagnosis and screening.
Assuntos
Técnicas Biossensoriais , Ferritinas/química , Ferro/análise , Técnicas Biossensoriais/instrumentação , Humanos , Dispersão Óptica RotatóriaRESUMO
We have developed highly efficient antimicrobial nanocarriers for berberine (BRB) based on shellac nanoparticles (NPs) which were surface-functionalised with a surface active polymer, Poloxamer 407 (P407), and the cationic surfactant octadecyltrimethylammonium bromide (ODTAB). These shellac nanocarriers were produced in a two-step process which involves: (i) a pH change from aqueous ammonium shellac solution using P407 as a steric stabilizer in the presence of berberine chloride, and (ii) addition of ODTAB to yield shellac nanocarriers of cationic surface. We determined the BRB encapsulation efficiency and release profiles from such nanocarriers. We explored the antimicrobial action of these nanocarriers at different stages of their preparation which allowed us gain better understanding how they work, fine tune their design and reveal the impact of the nanoparticle coatings on to its antimicrobial effect. The antimicrobial action of BRB loaded within such shellac NPs with cationic surface functionality was examined on three different microorganisms, C. reinhardtii, S. cerevisiae and E. coli and compared with the effect of free BRB as well as non-coated BRB-loaded nanocarriers at the same BRB concentrations. We found that the cationic surface coating of the shellac NPs strongly amplified the efficiency of the encapsulated BRB across all tested microorganisms. The effect was attributed to the increased attraction between the ODTAB-coated BRB-loaded NPs and the anionic surface of the cell walls which delivers locally high BRB concentration. This nanotechnological approach could lead to more effective antimicrobial and disinfecting agents, dental formulations for plaque control, wound dressings, antialgal/antibiofouling formulations and antifungal agents.
RESUMO
Leachable vanadium (V) from steel production residues poses a potential environmental hazard due to its mobility and toxicity under the highly alkaline pH conditions that characterise these leachates. This work aims to test the efficiency of anion exchange resins for vanadium removal and recovery from steel slag leachates at a representative average pH of 11.5. Kinetic studies were performed to understand the vanadium sorption process. The sorption kinetics were consistent with a pseudo-first order kinetic model. The isotherm data cannot differentiate between the Langmuir and Freundlich models. The maximum adsorption capacity (Langmuir value qmax) was 27 mg V g-1 resin. In column anion exchange, breakthrough was only 14% of the influent concentration after passing 90 L of steel slag leachate with 2 mg L-1 V through the column. When eluting the column 57-72% of vanadium was recovered from the resin with 2 M NaOH. Trials on the reuse of the anion exchange resin showed it could be reused 20 times without loss of efficacy, and on average 69% of V was recovered during regeneration. The results document for the first time the use of anion exchange resins to remove vanadium from steel slag leachate. As an environmental contaminant, removal of V from leachates may be an obligation for long-term management requirements of steel slag repositories. Vanadium removal coupled with the recovery can potentially be used to offset long-term legacy treatment costs.
Assuntos
Resíduos Industriais , Aço/química , Vanádio/química , Poluentes Químicos da Água/química , Resinas de Troca Aniônica , Inglaterra , Recuperação e Remediação Ambiental , Humanos , Purificação da Água/métodosRESUMO
We report a strong enhancement in the antimicrobial action of berberine encapsulated into polyacrylic acid-based nanogels followed by further surface functionalisation with a cationic polyelectrolyte (PDAC). Due to the highly developed surface area, the nanogel carrier amplifies the contact of berberine with microbial cells and increases its antimicrobial efficiency. We show that such cationic nanogel carriers of berberine can adhere directly to the cell membranes and maintain a very high concentration of berberine directly on the cell surface. We demonstrated that the antimicrobial action of the PDAC-coated nanogel loaded with berberine on E. coli and C. reinhardtii is much higher than that of the equivalent solution of free berberine due to the electrostatic adhesion between the positively charged nanogel particles and the cell membranes. Our results also showed a marked increase in their antimicrobial action at shorter incubation times compared to the non-coated nanogel particles loaded with berberine under the same conditions. We attribute this boost in the antimicrobial effect of these cationic nanocarriers to their accumulation on the cell membranes which sustains a high concentration of released berberine causing cell death within much shorter incubation times. This study can provide a blueprint for boosting the action of other cationic antimicrobial agents by encapsulating them into nanogel carriers functionalised with a cationic surface layer. This nanotechnology-based approach could lead to the development of more effective wound dressings, disinfecting agents, antimicrobial surfaces, and antiseptic and antialgal/antibiofouling formulations.
RESUMO
The evaluation of a micro fluidic system with an integrated silica monolith for performing DNA extraction from limited biological samples has been carried out. Low DNA target concentrations usually require the addition of carrier RNA to ensure desired extraction efficiencies. Here, we demonstrate a micro fluidic extraction system with increasingly efficient extraction performances for biological samples containing <15 ng of total DNA without the need of adding carrier nucleic acids. All extracted DNA showed successful amplification via the polymerase chain reaction demonstrating both the effectiveness of the proposed system at removing potential inhibitors and yielding good quality DNA. The work presented here beneficially identifies reduced sample volumes/concentrations as suitable for processing with respect to downstream analysis by enabling pre-concentration of the biological sample, particularly important when dealing with clinical or forensic specimens.
Assuntos
DNA/análise , Técnicas Analíticas Microfluídicas , Dióxido de Silício/química , Animais , Linhagem Celular , DNA/isolamento & purificação , Camundongos , Reação em Cadeia da PolimeraseRESUMO
Integrated DNA extraction and amplification have been carried out in a microfluidic device using electro-osmotic pumping (EOP) for fluidic control. All the necessary reagents for performing both DNA extraction and polymerase chain reaction (PCR) amplification were pre-loaded into the microfluidic device following encapsulation in agarose gel. Buccal cells were collected using OmniSwabs [Whatman™, UK] and manually added to a chaotropic binding/lysis solution pre-loaded into the microfluidic device. The released DNA was then adsorbed onto a silica monolith contained within the DNA extraction chamber and the microfluidic device sealed using polymer electrodes. The washing and elution steps for DNA extraction were carried out using EOP, resulting in transfer of the eluted DNA into the PCR chamber. Thermal cycling, achieved using a Peltier element, resulted in amplification of the Amelogenin locus as confirmed using conventional capillary gel electrophoresis. It was demonstrated that the PCR reagents could be stored in the microfluidic device for at least 8 weeks at 4 °C with no significant loss of activity. Such methodology lends itself to the production of 'ready-to-use' microfluidic devices containing all the necessary reagents for sample processing, with many obvious applications in forensics and clinical medicine.
Assuntos
DNA/isolamento & purificação , Técnicas Analíticas Microfluídicas/instrumentação , Técnicas Analíticas Microfluídicas/métodos , Técnicas de Amplificação de Ácido Nucleico/métodos , Extração em Fase Sólida/métodos , Amelogenina/genética , Eletroforese Capilar/métodos , Géis/química , Humanos , Reação em Cadeia da Polimerase , Polímeros , Dióxido de Silício/químicaRESUMO
There is an increasing demand for easy and cost-effective methods to screen the toxicological impact of the growing number of chemical mixtures being generated by industry. Such a screening method has been developed using viable, genetically modified green fluorescent protein (GFP) reporter yeast that was magnetically functionalised and held within a microfluidic device. The GFP reporter yeast was used to detect genotoxicity by monitoring the exposure of the cells to a well-known genotoxic chemical (methyl methane sulfonate, MMS). The cells were magnetised using biocompatible positively charged PAH-stabilised magnetic nanoparticles with diameters around 15 nm. Gradient mixing was utilised to simultaneously expose yeast to a range of concentrations of toxins, and the effective fluorescence emitted from the produced GFP was measured. The magnetically enhanced retention of the yeast cells, with their facile subsequent removal and reloading, allowed for very convenient and rapid toxicity screening of a wide range of chemicals. This is the first report showing magnetic yeast within microfluidic devices in a simple bioassay, with potential applications to other types of fluorescent reporter yeast in toxicological and biomedical research. The microfluidic chip offers a simple and low-cost screening test that can be automated to allow multiple uses (adapted to different cell types) of the device on a wide range of chemicals and concentrations.
Assuntos
Resíduos Industriais/análise , Magnetismo , Técnicas Analíticas Microfluídicas/métodos , Leveduras/metabolismo , Relação Dose-Resposta a Droga , Proteínas de Fluorescência Verde , Técnicas Analíticas Microfluídicas/instrumentação , Testes de Toxicidade , Leveduras/genéticaRESUMO
A novel chemiluminescence (CL) microfluidic system incorporating a molecularly imprinted polymer (MIP) preconcentration step was used for the determination of chloramphenicol in honey samples. The MIP was prepared by using chloramphenicol as the template, diethylaminoethyl methacrylate (DAM) as the function monomer, ethylene glycol dimethacrylate (EGDMA) as the cross-linking monomer, 2, 2'-dimethoxy-2-phenylacetophenone (DMPA) as the free radical initiator and toluene and dodecanol as the solvent. The MIP was pre-loaded into a 10 mm long, 2 mm wide and 150 microm deep channel in a planar glass microfluidic device. When the sample containing chloramphenicol was introduced into the microfluidic device it was first preconcentrated on the MIP then detected by an enhancement effect on the chemiluminescence reaction of tris(2, 2'-bipyridyl) ruthenium(II) with cerium(IV) sulphate in sulphuric acid. A micro-syringe pump was used to pump the reagents. The CL intensity was linear in relationship to the chloramphenicol concentrations from 1.55x10(-4) to 3.09x10(-3) micromol L(-1) (r(2)=0.9915) and the detection limit (3sigma) and the quantitation limit (10sigma) were found to be 7.46x10(-6) and 2.48x10(-5) micromol L(-1), respectively. This method offered a high selectivity and sensitivity for quantitative analysis of chloramphenicol in the honey samples.
Assuntos
Cloranfenicol/análise , Mel/análise , Luminescência , Impressão Molecular , Antibacterianos/análise , Microscopia Eletrônica de Varredura , Impressão Molecular/instrumentação , Impressão Molecular/métodos , Estrutura MolecularRESUMO
A microwave heating system is described for performing polymerase chain reaction (PCR) in a microfluidic device. The heating system, in combination with air impingement cooling, provided rapid thermal cycling with heating and cooling rates of up to 65 degrees C s(-1) and minimal over- or under-shoot (+/-0.1 degrees C) when reaching target temperatures. In addition, once the required temperature was reached it could be maintained with an accuracy of +/-0.1 degrees C. To demonstrate the functionality of the system, PCR was successfully performed for the amplification of the Amelogenin locus using heating rates and quantities an order of magnitude faster and smaller than current commercial instruments.
Assuntos
Calefação/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Reação em Cadeia da Polimerase Via Transcriptase Reversa/instrumentação , Termografia/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Micro-OndasRESUMO
A novel DNA loading methodology is presented for performing DNA extraction on a microfluidic system. DNA in a chaotropic salt solution was manually loaded onto a silica monolith orthogonal to the subsequent flow of wash and elution solutions. DNA was successfully extracted from buccal swabs using electro-osmotic pumping (EOP) coupled with in situ reagents contained within a 1.5% agarose gel matrix. The extracted DNA was of sufficient quantity and purity for polymerase chain reaction (PCR) amplification.
Assuntos
DNA/isolamento & purificação , Técnicas Analíticas Microfluídicas/instrumentação , Desenho de Equipamento , Feminino , Humanos , Técnicas Analíticas Microfluídicas/economia , Mucosa Bucal/citologia , Reação em Cadeia da Polimerase , Dióxido de Silício/química , Manejo de Espécimes/economia , Manejo de Espécimes/instrumentaçãoRESUMO
DNA extraction was carried out on silica-based monoliths within a microfluidic device. Solid-phase DNA extraction methodology was applied in which the DNA binds to silica in the presence of a chaotropic salt, such as guanidine hydrochloride, and is eluted in a low ionic strength solution, such as water. The addition of poly-A carrier RNA to the chaotropic salt solution resulted in a marked increase in the effective amount of DNA that could be recovered (25ng) compared to the absence of RNA (5ng) using the silica-based monolith. These findings confirm that techniques utilising nucleic acid carrier molecules can enhance DNA extraction methodologies in microfluidic applications.
Assuntos
DNA/isolamento & purificação , Técnicas Analíticas Microfluídicas/métodos , RNA/química , Dióxido de Silício/química , Técnicas Analíticas Microfluídicas/instrumentação , Extração em Fase SólidaRESUMO
An integrated gel supported micro-fluidic system is reported, in which PCR products can be efficiently injected into a capillary electrophoresis device. The gel supported system is designed to provide greater stability to reagents during long periods of dormancy, enabling the mass production of one use chips encapsulating all required reagents at the time of manufacturing. This simultaneously diminishes the risk of sample contamination, and reduces the amount of external hardware required for auxiliary flow control, thus increasing the potential for portability. After PCR amplification was performed in a polysaccharide gel matrix, the PCR product was injected into the separation gel polymer matrix by executing a capillary-based electro-kinetic pinched injection across a gel-to-gel interface. The gel-to-gel system delivered a precise and accurate plug into the separation polymer, which offered more stable electro-kinetic control of the sample compared to solution based methodology even when bubbles were present in the system. Suitable voltage control was proven to provide a repeatable electro-kinetic injection of PCR product sufficient for an on-chip separation of multiple loci by capillary electrophoresis.
Assuntos
DNA/análise , Eletroforese Capilar/instrumentação , Géis/química , Técnicas Analíticas Microfluídicas/instrumentação , DNA/isolamento & purificação , Eletroforese Capilar/métodos , Cinética , Técnicas Analíticas Microfluídicas/métodosRESUMO
A silica monolith used to support both electro-osmotic pumping (EOP) and the extraction/elution of DNA coupled with gel-supported reagents is described. The benefits of the combined EOP extraction/elution system were illustrated by combining DNA extraction and gene amplification using the polymerase chain reaction (PCR) process. All the reagents necessary for both processes were supported within pre-loaded gels that allow the reagents to be stored at 4 degrees C for up to four weeks in the microfluidic device. When carrying out an analysis the crude sample only needed to be hydrodynamically introduced into the device which was connected to an external computer controlled power supply via platinum wire electrodes. DNA was extracted with 65% efficiency after loading lysed cells onto a silica monolith. Ethanol contained within an agarose gel matrix was then used to wash unwanted debris away from the sample by EOP (100 V cm(-1) for 5 min). The retained DNA was subsequently eluted from the monolith by water contained in a second agarose gel, again by EOP using an electric field of 100 V cm(-1) for 5 min, and transferred into the PCR reagent containing gel. The eluted DNA in solution was successfully amplified by PCR, confirming that the concept of a complete self-contained microfluidic device could be realised for DNA sample clean up and amplification, using a simple pumping and on-chip reagent storage methodology.
Assuntos
DNA/isolamento & purificação , Eletro-Osmose/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Amelogenina/genética , Eletro-Osmose/métodos , Desenho de Equipamento , Etanol/química , Géis/química , Humanos , Técnicas Analíticas Microfluídicas/métodos , Reação em Cadeia da Polimerase , Dióxido de Silício/químicaRESUMO
A (+)-gamma-lactamase was precipitated, cross-linked and the resulting solid crushed prior to immobilisation within a capillary column microreactor. The microreactor was subsequently used to study enzyme stability, activity, kinetics and substrate specificity. The thermophilic (+)-gamma-lactamase retained 100% of its initial activity at the assay temperature, 80 degrees C, for 6 h and retained 52% activity after 10 h, indicating the advantage of immobilisation. This high stability of the immobilised enzyme provided the advantage that it could be utilised to screen many compounds in the microreactor system. This advantage overcame the fact that the immobilisation process affected enzyme kinetics and activity, which was reduced (by 70%) compared to the free enzyme. In general, the enzyme displayed similar substrate specificity to that found in a previous study for the free enzyme; however, enhanced activity was seen towards one substrate, acrylamide. The system developed correlates well with the free enzyme in batch assay and indicates the suitability of the system for enzyme substrate screening, allowing a significant reduction in cost, due to the reduced amounts of enzyme, substrates and other assay constituents required.
Assuntos
Amidoidrolases/química , Amidoidrolases/metabolismo , Reatores Biológicos , Reagentes de Ligações Cruzadas/química , Amidoidrolases/análise , Amidoidrolases/ultraestrutura , Biotransformação , Estabilidade Enzimática , Enzimas Imobilizadas/química , Concentração de Íons de Hidrogênio , Cinética , Técnicas Analíticas Microfluídicas/instrumentação , Miniaturização , Solubilidade , Especificidade por Substrato , Temperatura , Fatores de TempoRESUMO
A microfluidic chip has been developed to enable the screening of chemicals for environmental toxicity. The microfluidic approach offers several advantages over macro-scale systems for toxicity screening, including low cost and flexibility in design. This design flexibility means the chips can be produced with multiple channels or chambers which can be used to screen for different toxic compounds, or the same toxicant at different concentrations. Saccharomyces cerevisiae containing fluorescent markers are ideal candidates for the microfluidic screening system as fluorescence is emitted without the need of additional reagents. Microfluidic chips containing eight multi-parallel channels have been developed to retain yeast within the chip and allow exposure of them to toxic compounds. The recombinant yeast used was GreenScreentrade mark which expresses green fluorescent proteins when is exposed to genotoxins. After exposure of the yeast to target compounds, the fluorescence emission was detected using an inverted microscope. Qualitative and quantitative comparisons of the fluorescent emission were performed. Results indicated that fluorescent intensity per area significantly increases upon exposure to methyl-methanesulfonate, a well known genotoxic compound. The microfluidic approach reported here is an excellent tool for cell-based screening and detection of different toxicities. The device has the potential for use by industrial manufacturers to detect and reduce the production and discharge of toxic compounds, as well as to characterise already polluted environments.
Assuntos
Bioensaio/instrumentação , Técnicas Biossensoriais/instrumentação , Monitoramento Ambiental/instrumentação , Técnicas Analíticas Microfluídicas/instrumentação , Mutagênicos/análise , Saccharomyces cerevisiae/efeitos dos fármacos , Espectrometria de Fluorescência/instrumentação , Técnicas Biossensoriais/métodos , Desenho de Equipamento , Análise de Falha de Equipamento , Mutagênicos/administração & dosagem , Projetos Piloto , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Sol-gel nanoprobes, also known as Photonic Explorer for Bioanalysis with Biologically Localised Embedding (PEBBLE), capable of performing in-vitro intracellular monitoring of reactive oxygen species have been developed using a modified form of 5(6)-carboxyfluorescein diacetate. A sol-gel matrix was selected for the design of the probes as it is photostable, optically transparent and chemically inert, and to minimise leaching of the dye from the porous matrix it was covalently immobilised to silica nanoparticles (15 nm). Using this approach, 0.1% of the dye was found to leach over a typical analysis time of 5 h and minimal photobleaching was observed. In addition, the nanoprobes were shown to respond to hydrogen peroxide, hydroxyl anions, nitric oxide, peroxynitrile and superoxide anions, obtaining limits of detection of 2.2, 1.1, 3.2, 1.1 and 1.1 nM respectively. The nanoprobes were subsequently introduced into bovine oviducts using a lipid transfection reagent (Escort IV) and fluorescence was observed.
Assuntos
Técnicas Biossensoriais , Espécies Reativas de Oxigênio/análise , Animais , Bovinos , Tubas Uterinas/química , Feminino , Corantes Fluorescentes , Nanopartículas , Nanotecnologia , Silicatos , Dióxido de SilícioRESUMO
A novel ultrasonic flow injection chemiluminescence (FI-CL) manifold for determining hydrogen peroxide (H2O2) has been designed and evaluated. Chemiluminescence obtained from the luminol-H2O2-cobalt(II) reaction was enhanced by applying 120 W of ultrasound for a period of 4 s to the reaction coil in the FI-CL system and this enhancement was verified by comparison with an identical manifold without ultrasound. The system was developed for determining ultra-trace levels of H2O2 and a calibration curve was obtained with a linear portion over the range of 10-200 nmol L(-1) H2O2 (correlation coefficient 0.9945). The detection limit (3sigma) and the quantification limit (LOQ) were found to be 1 x 10(-9) and 3.3 x 10(-9) mol L(-1) respectively and the relative standard deviation was 1.37% for 2 x 10(-7) mol L(-1) H2O2 (n = 10). The method was applied to the determination of trace amounts of H2O2 in purified water and natural water samples without any special pre-treatments.