RESUMO
Semi-biological photosynthesis combines synthetic photosensitizers with microbial catalysts to produce sustainable fuels and chemicals from CO2. However, the inefficient transfer of photoexcited electrons to microbes leads to limited CO2 utilization, restricting the catalytic performance of such biohybrid assemblies. Here, we introduce a biological engineering solution to address the inherently sluggish electron uptake mechanism of a methanogen, Methanosarcina barkeri (M. barkeri), by coculturing it with an electron transport specialist, Geobacter sulfurreducens KN400 (KN400), an adapted strain rich with multiheme c-type cytochromes (c-Cyts) and electrically conductive protein filaments (e-PFs) made of polymerized c-Cyts with enhanced capacity for extracellular electron transfer (EET). Integration of this M. barkeri-KN400 co-culture with a synthetic photosensitizer, carbon nitride, demonstrates that c-Cyts and e-PFs, emanating from live KN400, transport photoexcited electrons efficiently from the carbon nitride to M. barkeri for methanogenesis with remarkable long-term stability and selectivity. The demonstrated cooperative interaction between two microbes via direct interspecies electron transfer (DIET) and the photosensitizer to assemble a semi-biological photocatalyst introduces an ecosystem engineering strategy in photocatalysis to drive sustainable chemical synthesis.
RESUMO
There is an urgent need to improve conventional cancer-treatments by preventing detrimental side effects, cancer recurrence and metastases. Recent studies have shown that presence of senescent cells in tissues treated with chemo- or radiotherapy can be used to predict the effectiveness of cancer treatment. However, although the accumulation of senescent cells is one of the hallmarks of cancer, surprisingly little progress has been made in development of strategies for their detection in vivo. To address a lack of detection tools, we developed a biocompatible, injectable organic nanoprobe (NanoJagg), which is selectively taken up by senescent cells and accumulates in the lysosomes. The NanoJagg probe is obtained by self-assembly of indocyanine green (ICG) dimers using a scalable manufacturing process and characterized by a unique spectral signature suitable for both photoacoustic tomography (PAT) and fluorescence imaging. In vitro, ex vivo and in vivo studies all indicate that NanoJaggs are a clinically translatable probe for detection of senescence and their PAT signal makes them suitable for longitudinal monitoring of the senescence burden in solid tumors after chemotherapy or radiotherapy.
Assuntos
Senescência Celular , Verde de Indocianina , Verde de Indocianina/química , Senescência Celular/efeitos dos fármacos , Humanos , Animais , Imagem Óptica , Camundongos , Nanopartículas/química , Corantes Fluorescentes/química , Técnicas Fotoacústicas/métodosRESUMO
We report the successful one pot synthesis of crystalline mesoporous tin dioxide powder doped with fluoride at ambient pressure and temperature. This material possesses a high surface area, narrow pore size distribution, small average crystallite sizes, and good opto-electrical properties. The existence of fluorine increased the opto-electronic activity of tin dioxide by 20 times, and conductivity by 100 times compared with pristine tin dioxide prepared via the same method. The conductivity of SnO2 in air at 25 °C is 5 × 10-5 S/m, whereas that of F-SnO2 is 4.8 × 10-3 S/m. The structures of these materials were characterized with powder X-ray diffraction, N2 sorption analysis, transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and UV-visible spectroscopy. Fluorine occupies the framework of tin dioxide by replacing some of the oxygen atoms. The structure, conductance, and optical properties of these materials are discussed in this paper.
RESUMO
Carbon dots (CDs) are low-cost light-absorbers in photocatalytic multicomponent systems, but their wide size distribution has hampered rational design and the identification of the factors that lead to their best performance. To address this challenge, we report herein the use of gel filtration size exclusion chromatography to separate amorphous, graphitic, and graphitic N-doped CDs depending on their lateral size to study the effect of their size on photocatalytic H2 evolution with a DuBois-type Ni cocatalyst. Transmission electron microscopy and dynamic light scattering confirm the size-dependent separation of the CDs, whereas UV-vis and fluorescence spectroscopy of the more monodisperse fractions show a distinct response which computational modelling attributes to a complex interplay between CD size and optical properties. A size-dependent effect on the photocatalytic H2 evolution performance of the CDs in combination with a molecular Ni cocatalyst is demonstrated with a maximum activity at approximately 2-3 nm CD diameter. Overall, size separation leads to a two-fold increase in the specific photocatalytic activity for H2 evolution using the monodisperse CDs compared to the as synthesized polydisperse samples, highlighting the size-dependent effect on photocatalytic performance.
RESUMO
A growing population suffering from or at high risk of developing cardiovascular diseases can benefit from rapid, precise, and readily available diagnostics. Textronics is an interdisciplinary approach for designing and manufacturing high-performance flexible electronics integrated with textiles for various applications, with electrocardiography (ECG) being the most convenient and most frequently used diagnostic technique for textronic solutions. The key challenges that still exist for textronics include expedient manufacturing, adaptation to human subjects, sustained operational stability for Holter-type data acquisition, reproducibility, and compatibility with existing solutions. The present study demonstrates conveniently paintable ECG electroconductive coatings on T-shirts woven from polyester or 70% polyamide and 30% polyester. The up to 600-µm-thick coatings encompass working electrodes of low resistivity 60 Ω sq-1 sheathed in the insulated pathways-conjugable with a wireless, multichannel ECG recorder. Long (800 µm) multiwalled carbon nanotubes, with scalable reproducibility and purity (18 g per round of synthesis), constituted the electroactive components and were embedded into a commercially available screen-printing acrylic base. The resulting paint had a viscosity of 0.75 Pa·s at 56 s-1 and 25 °C and was conveniently applied using a paintbrush, making this technique accessible to manufacturers. The amplified and nondigitally processed ECG signals were recorded under dry-skin conditions using a certified ECG recorder. The system enabled the collection of ECG signals from two channels, allowing the acquisition of cardiac electrical activity on six ECG leads with quality at par with medical diagnostics. Importantly, the Holter-type ECG allowed ambulatory recording for >24 h under various activities (sitting, sleeping, walking, and running) in three male participants. The ECG signal was stable for >5 cycles of washing, a level of stability not reported yet previously. The developed ECG-textronic application possesses acceptable and reproducible characteristics, making this technology a suitable candidate for further testing in clinical trials.
RESUMO
Investments in the transfer and storage of thermal energy along with renewable energy sources strengthen health and economic infrastructure. These factors intensify energy diversification and the more rapid post-COVID recovery of economies. Ionanofluids (INFs) composed of long multiwalled carbon nanotubes (MWCNTs) rich in sp2-hybridized atoms and ionic liquids (ILs) display excellent thermal conductivity enhancement with respect to the pure IL, high thermal stability, and attractive rheology. However, the influence of the morphology, physicochemistry of nanoparticles and the IL-nanostructure interactions on the mechanism of heat transfer and rheological properties of INFs remain unidentified. Here, we show that intertube nanolayer coalescence, supported by 1D geometry assembly, leads to the subzipping of MWCNT bundles and formation of thermal bridges toward 3D networks in the whole INF volume. We identified stable networks of straight and bent MWCNTs separated by a layer of ions at the junctions. We found that the interactions between the ultrasonication-induced breaking nanotubes and the cations were covalent in nature. Furthermore, we found that the ionic layer imposed by close MWCNT surfaces favored enrichment of the cis conformer of the bis(trifluoromethylsulfonyl)imide anion. Our results demonstrate how the molecular perfection of the MWCNT structure with its supramolecular arrangement affects the extraordinary thermal conductivity enhancement of INFs. Thus, we gave the realistic description of the interactions at the IL-CNT interface with its (super)structure and chemistry as well as the molecular structure of the continuous phase. We anticipate our results to be a starting point for more complex studies on the supramolecular zipping mechanism. For example, ionically functionalized MWCNTs toward polyionic systemsâof projected and controlled nanolayersâcould enable the design of even more efficient heat-transfer fluids and miniaturization of flexible electronics.
RESUMO
The brightest colours in nature often originate from the interaction of light with materials structured at the nanoscale. Different organisms produce such coloration with a wide variety of materials and architectures. In the case of bacterial colonies, structural colours stem for the periodic organization of the cells within the colony, and while considerable efforts have been spent on elucidating the mechanisms responsible for such coloration, the biochemical processes determining the development of this effect have not been explored. Here, we study the influence of nutrients on the organization of cells from the structurally coloured bacteria Flavobacterium strain IR1. By analysing the optical properties of the colonies grown with and without specific polysaccharides, we found that the highly ordered organization of the cells can be altered by the presence of fucoidans. Additionally, by comparing the organization of the wild-type strain with mutants grown in different nutrient conditions, we deduced that this regulation of cell ordering is linked to a specific region of the IR1 chromosome. This region encodes a mechanism for the uptake and metabolism of polysaccharides, including a polysaccharide utilization locus (PUL operon) that appears specific to fucoidan, providing new insight into the biochemical pathways regulating structural colour in bacteria.
Assuntos
Bactérias , Polissacarídeos , Bactérias/metabolismo , Cor , Polissacarídeos/metabolismoRESUMO
The stability along with thermal and rheological characteristics of ionanofluids (INFs) profoundly depend on the protocol of preparation. Therefore, in this work, the effect of ultrasonication time on microstructure, thermal conductivity, and viscosity of INFs containing 0.2 wt% of originally ultra-long multi-walled carbon nanotubes (MWCNTs) and four different ILs, namely 1-propyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, 1-ethyl-3-methylimidazolium thiocyanate, or 1-ethyl-3-methylimidazolium tricyanomethanide, was studied. The INFs were obtained by a two-step method using an ultrasonic probe. The ultrasonication process was performed for 1, 3, 10, or 30 min at a constant nominal power value of 200 W. The obtained results showed that for the shortest sonication time, the highest thermal conductivity enhancement of 12% was obtained. The extended sonication time from 1 to 30 min caused the cutting of MWCNTs and breaking the nanoparticle clusters, leading to a decrease in the average length of the nanotube bundles by approx. 70%. This resulted in a decline in thermal conductivity even by 7.2% and small deviations from the Newtonian behavior of INFs.
RESUMO
Extracellular electron transfer (EET) in microorganisms is prevalent in nature and has been utilized in functional bioelectrochemical systems. EET of Geobacter sulfurreducens has been extensively studied and has been revealed to be facilitated through c-type cytochromes, which mediate charge between the electrode and G. sulfurreducens in anodic mode. However, the EET pathway of cathodic conversion of fumarate to succinate is still under debate. Here, we apply a variety of analytical methods, including electrochemistry, UV-vis absorption and resonance Raman spectroscopy, quartz crystal microbalance with dissipation, and electron microscopy, to understand the involvement of cytochromes and other possible electron-mediating species in the switching between anodic and cathodic reaction modes. By switching the applied bias for a G. sulfurreducens biofilm coupled to investigating the quantity and function of cytochromes, as well as the emergence of Fe-containing particles on the cell membrane, we provide evidence of a diminished role of cytochromes in cathodic EET. This work sheds light on the mechanisms of G. sulfurreducens biofilm growth and suggests the possible existence of a nonheme, iron-involving EET process in cathodic mode.
Assuntos
Proteínas de Bactérias/metabolismo , Biofilmes , Grupo dos Citocromos c/metabolismo , Elétrons , Geobacter/fisiologia , Acetatos/metabolismo , Técnicas Eletroquímicas , Eletrodos , Ferro/metabolismo , Oxirredução , Ácido Succínico/metabolismoRESUMO
Anion exchange has been performed with nanoplates of tin sulfide (SnS) via "soft chemical" organic-free solution syntheses to yield layered pseudo-ternary tin chalcogenides on a 10 g-scale. SnS undergoes a topotactic transformation to form a series of S-substituted tin selenide (SnSe) nano/micro-plates with tuneable chalcogenide composition. SnS0.1Se0.9 nanoplates were spark plasma sintered into phase-pure, textured, dense pellets, the ZT of which has been significantly enhanced to ≈1.16 from ≈0.74 at 923 K via microstructure texturing control. These approaches provide versatile, scalable and low-cost routes to p-type layered tin chalcogenides with controllable composition and competitive thermoelectric performance.
RESUMO
Dehydrogenation or oxidative dehydrogenation (ODH) of alkanes to produce alkenes directly from natural gas/shale gas is gaining in importance. Ti3 AlC2 , a MAX phase, which hitherto had not been used in catalysis, efficiently catalyzes the ODH of n-butane to butenes and butadiene, which are important intermediates for the synthesis of polymers and other compounds. The catalyst, which combines both metallic and ceramic properties, is stable for at least 30â h on stream, even at low O2 :butane ratios, without suffering from coking. This material has neither lattice oxygens nor noble metals, yet a unique combination of numerous defects and a thin surface Ti1-y Aly O2-y/2 layer that is rich in oxygen vacancies makes it an active catalyst. Given the large number of compositions available, MAX phases may find applications in several heterogeneously catalyzed reactions.
RESUMO
A facile one-pot aqueous solution method has been developed for the fast and straightforward synthesis of SnTe nanoparticles in more than ten gram quantities per batch. The synthesis involves boiling an alkaline Na2SnO2 solution and a NaHTe solution for short time scales, in which the NaOH concentration and reaction duration play vital roles in controlling the phase purity and particle size, respectively. Spark plasma sintering of the SnTe nanoparticles produces nanostructured compacts that have a comparable thermoelectric performance to bulk counterparts synthesised by more time- and energy-intensive methods. This approach, combining an energy-efficient, surfactant-free solution synthesis with spark plasma sintering, provides a simple, rapid, and inexpensive route to p-type SnTe nanostructured materials.
RESUMO
A surfactant-free solution methodology, simply using water as a solvent, has been developed for the straightforward synthesis of single-phase orthorhombic SnSe nanoplates in gram quantities. Individual nanoplates are composed of {100} surfaces with {011} edge facets. Hot-pressed nanostructured compacts (Eg ≈0.85â eV) exhibit excellent electrical conductivity and thermoelectric power factors (S(2) σ) at 550â K. S(2) σ values are 8-fold higher than equivalent materials prepared using citric acid as a structure-directing agent, and electrical properties are comparable to the best-performing, extrinsically doped p-type polycrystalline tin selenides. The method offers an energy-efficient, rapid route to p-type SnSe nanostructures.
RESUMO
RHO zeolitic imidazolate framework (ZIF), Zn1.33 (O.OH)0.33 (nim)1.167 (pur), crystals with a rhombic dodecahedral morphology were synthesized by a solvothermal process. The growth of the crystals was studied over time using scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (PXRD) and Brunauer-Emmett-Teller (BET) analyses, and a reversed crystal growth mechanism was revealed. Initially, precursor materials joined together to form disordered aggregates, which then underwent surface recrystallization forming a core-shell structure, in which a disordered core is encased in a layer of denser, less porous crystal. When the growth continued, the shell became less and less porous, until it was a layer of true single crystal. The crystallization then extended from the surface to the core over a six-week period until, eventually, true single crystals were formed.
RESUMO
The crystallization of zeolite TUN with 1,4-bis(N-methylpyrrolidinium)butane as template proceeds through an intermediate, designated IPC-3P, following the Ostwald rule of successive transformations. This apparently layered transient product has been thoroughly investigated and found to consist of MWW monolayers stacked without alignment in register, that is, disordered compared with MCM-22P. The structure was confirmed based on X-ray diffraction and high-resolution (HR)TEM analysis. The layered zeolite precursor IPC-3P can be swollen and pillared affording a combined micro- and mesoporous material with enhanced Brunauer-Emmett-Teller (BET) surface area (685â m(2) g(-1) ) and greater accessibility of Brønsted acid sites for bulky molecules. This mesoporous material was probed with 2,6-di-tert-butylpyridine (DTBP). IPC-3P and its modification create a new layered zeolite sub-family belonging to the MWW family. FTIR data indicate that (Al)MWW materials MCM-22 and IPC-3 with Si/Al ratios greater than 20 exhibit a lower relative ratio of Brønsted to Lewis acid sites than MCM-22 (with Si/Al ratios of around 13), that is, less than 2 versus more than 3, respectively. This is maintained even upon pillaring and warrants further exploration of materials like IPC-3P with a higher Al content. The unique XRD features of IPC-3P indicating misaligned stacking of layers and distinct from MCM-22P, are also seen in other MWW materials such as EMM-10P, hexamethonium-templated (HM)-MCM-22, ITQ-30, and UZM-8 suggesting the need for more detailed study of their identity and properties.
RESUMO
Hexagonal ZnO microdisks are grown and then selectively dissolved to form microstadiums. Analysis of the growth and dissolution of the microdisks revealed that they follow a reversed crystal growth mechanism, i.e. aggregation of precursors followed by surface crystallization and extension of crystallization from the surface to the core.
RESUMO
Mesocrystals of ZnO were synthesized hydrothermally by using gum arabic as a structure-directing agent. Their hierarchical structure has a unique twin-brush form consisting of vertically aligned nanorods in a single-crystal-like porous form. The formation mechanism of the twin-brush ZnO was investigated by quenching a series of samples at different times and examining them by TEM, SEM, and XRD. The alignment of ZnO crystal units can be modulated by adding simple salts such as KCl to change the units from nanorods to nanoplates. This can be explained by screening the dipolar force of the polar crystal. Local cathodoluminescence of twin-brush ZnO was used to follow the local structure changes.