RESUMO
This paper presents a combined optical coherence tomography (OCT) imaging/machine learning (ML) technique for real-time analysis of lung tissue morphology to determine the presence and level of invasiveness of idiopathic lung fibrosis (ILF). This is an important clinical problem as misdiagnosis is common, resulting in patient exposure to costly and invasive procedures and substantial use of healthcare resources. Therefore, biopsy is needed to confirm or rule out radiological findings. Videoscopic-assisted thoracoscopic wedge biopsy (VATS) under general anesthesia is typically necessary to obtain enough tissue to make an accurate diagnosis. This kind of biopsy involves the placement of several tubes through the chest wall, one of which is used to cut off a piece of lung to send for evaluation. The removed tissue is examined histopathologically by microscopy to confirm the presence and the pattern of fibrosis. However, VATS pulmonary biopsy can have multiple side effects, including inflammation, tissue morbidity, and severe bleeding, which further degrade the quality of life for the patient. Furthermore, the results are not immediately available, requiring tissue processing and analysis. Here, we report an initial attempt of using ML-assisted polarization sensitive OCT (PS-OCT) imaging for lung fibrosis assessment. This approach has been preliminarily tested on a rat model of lung fibrosis. Our preliminary results show that ML-assisted PS-OCT imaging can detect the presence of ILF with an average of 77% accuracy and 89% specificity.
RESUMO
This paper presents a technique for high sensitivity measurement of singlet oxygen luminescence generated during photodynamic therapy (PDT) and ultraviolet (UV) irradiation on skin. The high measurement sensitivity is achieved by using a computational spectroscopy (CS) approach that provides improved photon detection efficiency compared to spectral filtering methodology. A solid-state InGaAs photodiode is used as the CS detector, which significantly reduces system cost and improves robustness compared to photomultiplier tubes. The spectral resolution enables high-accuracy determination and subtraction of photosensitizer fluorescence baseline without the need for time-gating. This allows for high sensitivity detection of singlet oxygen luminescence emission generated by continuous wave light sources, such as solar simulator sources and those commonly used in PDT clinics. The value of the technology is demonstrated during in vivo and ex vivo experiments that show the correlation of measured singlet oxygen with PDT treatment efficacy and the illumination intensity on the skin. These results demonstrate the potential use of the technology as a dosimeter to guide PDT treatment and as an analytical tool supporting the development of improved sunscreen products for skin cancer prevention.
RESUMO
This paper presents a combined optical imaging/artificial intelligence (OI/AI) technique for the real-time analysis of tissue morphology at the tip of the biopsy needle, prior to collecting a biopsy specimen. This is an important clinical problem as up to 40% of collected biopsy cores provide low diagnostic value due to high adipose or necrotic content. Micron-scale-resolution optical coherence tomography (OCT) images can be collected with a minimally invasive needle probe and automatically analyzed using a computer neural network (CNN)-based AI software. The results can be conveyed to the clinician in real time and used to select the biopsy location more adequately. This technology was evaluated on a rabbit model of cancer. OCT images were collected with a hand-held custom-made OCT probe. Annotated OCT images were used as ground truth for AI algorithm training. The overall performance of the AI model was very close to that of the humans performing the same classification tasks. Specifically, tissue segmentation was excellent (~99% accuracy) and provided segmentation that closely mimicked the ground truth provided by the human annotations, while over 84% correlation accuracy was obtained for tumor and non-tumor classification.
RESUMO
MR-guided focal cryoablation of prostate cancer has often been selected as a minimally-invasive treatment option. Placing multiple cryo-needles accurately to form an ablation volume that adequately covers the target volume is crucial for better oncological/functional outcomes. This paper presents an MRI-compatible system combining a motorized tilting grid template with insertion depth sensing capabilities, enabling the physician to precisely place the cryo-needles into the desired location. In vivo animal study in a swine model (3 animals) was performed to test the device performance including targeting accuracy and the procedure workflow. The study showed that the insertion depth feedback improved the 3D targeting accuracy when compared to the conventional insertion technique (7.4 mm vs. 11.2 mm, p=0.04). All three cases achieved full iceball coverage without repositioning the cryo-needles. The results demonstrate the advantages of the motorized tilting mechanism and real-time insertion depth feedback, as well as the feasibility of the proposed workflow for MRI-guided focal cryoablation of prostate cancer.
RESUMO
Driving is a ubiquitous activity that requires both motor skills and cognitive focus. These aspects become more problematic for some seniors, who have underlining medical conditions and tend to lose some of these capabilities. Therefore, driving can be used as a controlled environment for the frequent, non-intrusive monitoring of bio-physical and cognitive status within drivers. Such information can then be utilized for enhanced assistive vehicle controls and/or driver health monitoring. In this paper, we present a novel multi-modal smart steering sleeve (S3) system with an integrated sensing platform that can non-intrusively and continuously measure a driver's physiological signals, including electrodermal activity (EDA), electromyography (EMG), and hand pressure. The sensor suite was developed by combining low-cost interdigitated electrodes with a piezoresistive force sensor on a single, flexible polymer substrate. Comprehensive characterizations on the sensing modalities were performed with promising results demonstrated. The sweat-sensing unit (SSU) for EDA monitoring works under a 100 Hz alternative current (AC) source. The EMG signal acquired by the EMG-sensing unit (EMGSU) was amplified to within 5 V. The force-sensing unit (FSU) for hand pressure detection has a range of 25 N. This flexible sensor was mounted on an off-the-shelf steering wheel sleeve, making it an add-on system that can be installed on any existing vehicles for convenient and wide-coverage driver monitoring. A cloud-based communication scheme was developed for the ease of data collection and analysis. Sensing platform development, performance, and limitations, as well as other potential applications, are discussed in detail in this paper.
Assuntos
Condução de Veículo , Condução de Veículo/psicologia , Coleta de Dados , Monitorização Fisiológica , SuorRESUMO
Noninvasive assessment of skin lesions, especially of basal cell carcinoma (BCC), has benefited more recently from the use of optical imaging techniques such as optical coherence tomography (OCT) and reflectance confocal microscopy (RCM). While RCM provides submicron scale resolution and thus enables identification of skin morphological changes of the skin, with the downside of limited penetration depth, OCT imaging of the same lesion brings the benefit of better resolving its depth of invasion. OCT and RCM can be used either individually or combined within the same instrument for the noninvasive diagnosis of nonmelanoma skin cancers (NMSCs). Their combined use has shown to provide certain benefits such as better characterization of the lesion's margins, both in depth and laterally, as well as improved sensitivity and specificity, as previously demonstrated by our team. In this paper we report a new "fiber-based" implementation of the second-generation RCM-OCT hand-held probe. The fiber-based implementation of both imaging modalities enabled the construction of a smaller footprint/lower weight hand-held probe. Its preliminary evaluation on the skin of healthy volunteers is reported here, demonstrating improved capabilities for resolving sub-cellular structures and image skin morphology with micron-scale resolution to a higher depth than in the previous implementation, while also enabling the construction of angiography maps showing vascular remodeling.
RESUMO
BACKGROUND: Our objective was to develop and test a combined Raman microspectroscopy (RMS) and micro-optical coherence tomography (µOCT) approach for chairside quantification of gingival collagen, DNA, epithelium, and connective tissue. We hypothesized that a high-resolution RMS/µOCT can characterize healthy and inflamed periodontal tissues for diagnosis and disease activity monitoring. METHODS: A prototype instrument was developed, tested ex vivo on gingival specimens and optimized for in vivo intraoral use. The primary outcome measures were the ratios of oral epithelium to connective tissue thickness (OE:CT) and the amount of DNA to collagen type I (DNA/Col 1), and the thickness of sulcular epithelium (SE). For ex vivo testing, eight subjects with healthy periodontal tissues or with Stage II to IV periodontitis were included in the study and underwent crown-lengthening or periodontal surgical procedures, respectively. Gingival biopsies were scanned by RMS/µOCT and histometric analyses were performed. The proof-of-concept study included OE/CT, DNA/Col 1, and SE assessed in six volunteers with or without signs of gingival inflammation (n = 3/group). RESULTS: The spatially co-registered RMS spectra revealed opposing changes in the collagen and DNA peaks of inflamed compared with healthy tissues (P <0.05). Combined RMS/µOCT analysis showed that OE/CT, DNA/Col, and SE are significantly different between healthy and inflamed sites (P <0.05). Histological assessments confirmed the differences detected by RMS/µOCT. Qualitative analysis of DNA/Col 1 ratios indicated Col I content as the main distinguishing feature for health and DNA content for periodontitis. CONCLUSION: Results suggest that combined RMS/µOCT chairside imaging may distinguish between healthy and diseased sites by evaluating marginal periodontal morphological and biochemical features.
Assuntos
Periodontite , Tomografia de Coerência Óptica , Humanos , Tomografia de Coerência Óptica/métodos , Projetos Piloto , Gengiva/diagnóstico por imagem , Gengiva/patologia , Periodontite/patologia , Periodonto/diagnóstico por imagem , Periodonto/patologiaRESUMO
PURPOSE: Magnetic resonance imaging (MRI)-guided transperineal prostate biopsy has been practiced since the early 2000s. The technique often suffers from targeting error due to deviation of the needle as a result of physical interaction between the needle and inhomogeneous tissues. Existing needle guide devices, such as a grid template, do not allow choosing an alternative insertion path to mitigate the deviation because of their limited degree-of-freedom (DoF). This study evaluates how an angulated needle insertion path can reduce needle deviation and improve needle placement accuracy. METHODS: We extended a robotic needle-guidance device (Smart Template) for in-bore MRI-guided transperineal prostate biopsy. The new Smart Template has a 4-DoF needle-guiding mechanism allowing a translational range of motion of 65 and 58 mm along the vertical and horizontal axis, and a needle rotational motion around the vertical and horizontal axis ± 30 ∘ and a vertical rotational range of - 30 ∘ , + 10 ∘ , respectively. We defined a path planning strategy, which chooses between straight and angulated insertion paths depending on the anatomical structures on the potential insertion path. We performed (a) a set of experiments to evaluate the device positioning accuracy outside the MR-bore, and (b) an in vivo experiment to evaluate the improvement of targeting accuracy combining straight and angulated insertions in animal models (swine, n = 3 ). RESULTS: We analyzed 46 in vivo insertions using either straight or angulated insertions paths. The experiment showed that the proposed strategy of selecting straight or angulated insertions based on the subject's anatomy outperformed the conventional approach of just straight insertions in terms of targeting accuracy (2.4 mm [1.3-3.7] vs 3.9 mm [2.4-5.0] {Median IQR } ); p = 0.041 after the bias correction). CONCLUSION: The in vivo experiment successfully demonstrated that an angulated needle insertion path could improve needle placement accuracy with a path planning strategy that takes account of the subject-specific anatomical structures.
Assuntos
Neoplasias da Próstata , Robótica , Animais , Humanos , Biópsia Guiada por Imagem , Imageamento por Ressonância Magnética , Masculino , Agulhas , Próstata/diagnóstico por imagem , Neoplasias da Próstata/diagnóstico por imagem , SuínosRESUMO
Providing surgical margin information during breast cancer surgery is crucial for the success of the procedure. The margin is defined as the distance from the tumor to the cut surface of the resection specimen. The consensus among surgeons and radiation oncologists is that there should be no tumor left within 1 to maximum 2 mm from the surface of the surgical specimen. If a positive margin remains, there is substantial risk for tumor recurrence, which may also result in potentially reduced cosmesis and eventual need for mastectomy. In this paper we report a novel multimodal optical imaging instrument based on combined high-resolution confocal microscopy-optical coherence tomography imaging for assessing the presence of potential positive margins on surgical specimens. Since rapid specimen analysis is critical during surgery, this instrument also includes a fluorescence imaging channel to enable rapid identification of the areas of the specimen that have potential positive margins. This is possible by specimen incubation with a cancer specific agent prior to imaging. In this study we used a quenched contrast agent, which is activated by cancer specific enzymes, such as urokinase plasminogen activators (uPA). Using this agent or a similar one, one may limit the use of high-resolution optical imaging to only fluorescence-highlighted areas for visualizing tissue morphology at the sub-cellular scale and confirming or ruling out cancer presence. Preliminary evaluation of this technology was performed on 20 surgical specimens and testing of the optical imaging findings was performed against histopathology. The combination of the three imaging modes allowed for high correlation between optical image analysis and histological ground-truth. The initial results are encouraging, showing instrument capability to assess margins on clinical specimens with a positive predictive value of 1.0 and a negative predictive value of 0.83.