Optimization of Antifungal Properties of Hop Cone Carbon Dioxide Extracts Based on Response Surface Methodology.

Response surface methodology (RSM) was employed to optimize the process parameters of the supercritical carbon dioxide extraction of hop cones in terms of their antifungal properties against Fusarium culmorum and Aspergillus niger. The effects of temperature (40-50 °C), pressure (200-300 bar), and CO2 consumption (25-75 kgCO2/kg) on the extraction yield, content of α- and ß-acids, as well as pathogens' growth inhibition were investigated. Both pressure and CO2 consumption had a significant effect on antifungal properties. It was observed that the best results for antifungal properties were obtained when hop cones were extracted with pure carbon dioxide at the temperature of 50 °C, under the pressure of 300 bar with CO2 consumption at the level of 75 kgCO2/kg of feed for extraction. The highest antifungal properties of hop cone supercritical carbon dioxide extracts were analyzed as 100% for Fusarium culmorum and 68% for Aspergillus niger, calculated as the growth inhibition of tested pathogens. The aim of the study was to determine the optimum values of extraction parameters to achieve the maximum response and enable us to investigate the interaction of these parameters on the antifungal properties of hop cone extracts.

Multi-Residue Method for Pesticides Determination in Dried Hops by Liquid Chromatography Tandem Mass Spectrometry.

In this study a multi-residue determination method for 36 pesticides in dried hops was reported. The sample preparation procedure was based on the acetate buffered QuEChERS method. A few mixtures of dispersive solid phase extraction (dSPE) sorbents consisting PSA, C18, GCB, Z-Sep and Z-Sep+ were investigated to clean-up the supernatant and minimize matrix co-extractives. The degree of clean-up was assessed by gravimetric measurements, which showed the best results for mixtures containing the Z-Sep+ sorbent. This is the first study to apply Z-Sep+ sorbent for hops material and the first to improve the method for pesticide residues determination in hops. Samples were analysed using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) and the procedure was validated according to the SANTE/11813/2017 document at four concentration levels: 0.02, 0.05, 0.1 and 1 mg/kg. The limits of quantification (LOQ) were in the range of 0.02-0.1 mg/kg. For all active substances, the trueness (recovery) ranged from 70 to 120% and the precision (RSDr) value was <20%. Specificity, linearity and matrix effect were also evaluated. The validated method was applied to the analysis of 15 real dried hop samples and the relevant data on detected residues were included.