RESUMO
The vast majority of light-emitting diode and liquid-crystal displays, solar panels, and windows in residential and industrial buildings use glass panels owing to their high mechanical stability, chemical resistance, and optical properties. Glass surfaces reflect about 4-5% of incident light if no antireflective coating is applied. In addition to energy losses in displays, surface reflections diminish picture quality. Engineering of antireflective coatings can be beneficial for all types of glass screens, specifically for large screens and touch-screen devices when scratch-resistance and self-cleaning properties of the glass surface are also desired. A scalable and robust approach to produce antireflective coatings for glass surfaces with desired optical and mechanical properties is introduced in this work. The developed coating mimics the structure of a moth-eye cornea. The coating is a subwavelength-microstructured thin layer on the glass surface made of a monolayer of hemispherical silica nanoparticles obtained by hydrothermal fusion of spherical particles to the glass substrate. The sequence of the particle deposition in the layer-by-layer process is adjusted to balance attractive-repulsive interactions among nanoparticles and between the nanoparticles and the glass surface to generate coatings with a high surface coverage of up to 70%, which exceeds the 54.7% limit of the random sequential addition model. This level of surface coverage allows for a combination of properties beneficial for the described applications: (i) an average reflectance of 0.5 ± 0.2% for a visible and near-infrared optical spectrum, (ii) an improved mechanical stability and scratch resistance, and (iii) non-wetting behavior.
RESUMO
We studied NE-4C neural cells differentiation on 2D polycaprolactone (PCL) nanofibrous scaffolds with systematically varied mechanical characteristics of nanofibers while retaining an unchanged fiber alignment, diameter, and chemical composition. Our experiments demonstrated that the nanofibers with enhanced mechanical properties are beneficial for the preferential development of neuronal cells vs. glial cells. Electrospun (ES) and touch-spun (TS) nanofibers were fabricated with Young's modulus in the range of 10 MPa to 230 MPa and a fraction of crystallinity from 30% to 80%. The TS fibers undergo a greater drawing ratio and thus approach a greater polymer chain stretching and alignment that resulted in an increased crystallinity. The TS scaffolds demonstrated improved stability in the aqueous cell culture environment, resisting misalignment and entanglement after a period of 2 weeks of swelling followed by 14 days of neural differentiation. The results confirmed that the neurites on the TS fibers have a preferred orientation even after swelling.
Assuntos
Nanofibras/química , Alicerces Teciduais/química , Animais , Diferenciação Celular/fisiologia , Humanos , Células-Tronco Neurais/citologia , Células-Tronco Neurais/metabolismo , Poliésteres/química , Polímeros/química , Engenharia Tecidual/métodosRESUMO
A facile route to biofouling-resistant porous thin-film membranes that can be fine-tuned for specific needs in diverse bioseparation, mass flow control, sensors, and drug delivery applications is reported. The proposed approach is based on combining two distinct macromolecular systems-a cross-linked poly(2-vinyl pyridine) network and a 3D-grafted polyethylene oxide (PEO) layer-in one robust porous material whose porosity can be adjusted within a wide range, covering the macroporous and mesoporous size regimes. Notably, this reconfigurable material maintains its antifouling properties throughout the entire range of pore size configurations because of a dense surface carpet of PEO chains with self-healing properties that are immobilized both onto the surface and inside the polymer network through what was termed 3D grafting. Experimental results are supplemented by computer simulations of a coarse-grained model of a porous membrane that shows qualitatively similar pore swelling behavior.
Assuntos
Incrustação Biológica/prevenção & controle , Simulação por Computador , Sistemas de Liberação de Medicamentos , Membranas Artificiais , Polímeros/química , PorosidadeRESUMO
Designing innovative materials for biomedical applications is desired to prevent surface fouling and risk of associated infections arising in the surgical care patient. In the present study, albumin plastic was fabricated and nitric oxide (NO) donor, S-nitroso-N-acetylpenicillamine (SNAP), was incorporated through a solvent swelling process. The albumin-SNAP plastic was evaluated in terms of mechanical and thermal properties, and bacterial adhesion to the plastic surface. Thermal and viscoelastic analyses showed no significant difference between albumin-SNAP plastics and pure, water-plasticized albumin samples. Bacteria adhesion tests revealed that albumin-SNAP plastic can significantly reduce the surface-bound viable gram-positive Staphylococcus aureus and gram-negative Pseudomonas aeruginosa bacterial cells by 98.7 and 98.5%, respectively, when compared with the traditional polyvinyl chloride medical grade tubing material. The results from this study demonstrate NO-releasing albumin plastic's potential as a material for biomedical device applications. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1535-1542, 2018.
Assuntos
Albuminas/química , Aderência Bacteriana/efeitos dos fármacos , Infecções Bacterianas/prevenção & controle , Materiais Biocompatíveis/química , Doadores de Óxido Nítrico/administração & dosagem , Plásticos/química , S-Nitroso-N-Acetilpenicilamina/administração & dosagem , Infecções Bacterianas/etiologia , Equipamentos e Provisões/efeitos adversos , Equipamentos e Provisões/microbiologia , Humanos , Doadores de Óxido Nítrico/farmacologia , Pseudomonas aeruginosa/efeitos dos fármacos , S-Nitroso-N-Acetilpenicilamina/farmacologia , Staphylococcus aureus/efeitos dos fármacosRESUMO
Robust, simple, and scalable touch- and brush-spinning methods for the drawing of nanofibers, core-shell nanofibers, and their aligned 2D and 3D meshes using polymer solutions and melts are discussed.
Assuntos
Nanofibras/química , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Linhagem Celular Tumoral , Proliferação de Células/efeitos dos fármacos , Camundongos , Microscopia Confocal , Microscopia Eletrônica de Varredura , Nanofibras/toxicidade , Polietilenoglicóis/químicaRESUMO
Magnetic field assisted assembly is used to fabricate aligned single nanowire mesh-like nanostructured films. Inhomogeneous magnetic field is applied to translocate high aspect ratio silver nanowires from suspensions to the surface of solid supports. The tangential component of the magnetic field vector is rotated in two consecutive steps to arrange the rectangular mesh-like structure of orthogonally oriented nanowires with minimal fractions of loops and bent structures. This work demonstrates highly ordered nanowire films with superior properties to randomly deposited structures- specifically one order of magnitude greater conductivity and more than ten percent higher transparency. This method is simple, scalable and can be used for the directed assembly of magnetic and nonmagnetic highly ordered, percolated structures.