Nitro-PAHs: Occurrences, ecological consequences, and remediation strategies for environmental restoration.

Nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) are persistent pollutants that have been introduced into the environment as a result of human activities. They are produced when PAHs undergo oxidation and are highly resistant to degradation, resulting in prolonged exposure and significant health risks for wildlife and humans. Nitro-PAHs' potential to induce cancer and mutations has raised concerns about their harmful effects. Furthermore, their ability to accumulate in the food chain seriously threatens the ecosystem and human health. Moreover, nitro-PAHs can disrupt the normal functioning of the endocrine system, leading to reproductive and developmental problems in humans and other organisms. Reducing nitro-PAHs in the environment through source management, physical removal, and chemical treatment is essential to mitigate the associated environmental and human health risks. Recent studies have focused on improving nitro-PAHs' phytoremediation by incorporating microorganisms and biostimulants. Microbes can break down nitro-PAHs into less harmful substances, while biostimulants can enhance plant growth and metabolic activity. By combining these elements, the effectiveness of phytoremediation for nitro-PAHs can be increased. This study aimed to investigate the impact of introducing microbial and biostimulant agents on the phytoremediation process for nitro-PAHs and identify potential solutions for addressing the environmental risks associated with these pollutants.

Metal oxide modified biochars for fertile soil management: Effects on soil phosphorus transformation, enzyme activity, microbe community, and plant growth.

Metal oxide modified biochars are increasingly being used for intensive agricultural soil remediation, but there has been limited research on their effects on soil phosphorus transformation, soil enzyme activity, microbe community and plant growth. Two highly-performance metal oxides biochars (FeAl-biochar and MgAl-biochar) were investigated for their effects on soil phosphorus availability, fractions, enzyme activity, microbe community and plant growth in two typical intensive fertile agricultural soils. Adding raw biochar to acidic soil increased NH4Cl-P content, while metal oxide biochar reduced NH4Cl-P content by binding to phosphorus. Original biochar slightly reduced Al-P content in lateritic red soil, while metal oxide biochar increased it. LBC and FBC significantly reduced Ca2-P and Ca8-P properties while improving Al-P and Fe-P, respectively. Inorganic phosphorus-solubilizing bacteria increased in abundance with biochar amendment in both soil types, and biochar addition affected soil pH and phosphorus fractions, leading to changes in bacterial growth and community structure. Biochar's microporous structure allowed it to adsorb phosphorus and aluminum ions, making them more available for plants and reducing leaching. In calcareous soils, biochar additions may dominantly increase the Ca (hydro)oxides bounded P or soluble P instead of Fe-P or Al-P through biotic pathways, favoring plant growth. The recommendations for using metal oxides biochar for fertile soil management include using LBC biochar for optimal performance in both P leaching reduction and plant growth promotion, with the mechanisms differing depending on soil type. This research highlights the potential of metal oxide modified biochars for improving soil fertility and reducing phosphorus leaching, with specific recommendations for their use in different soil types.

Recent progresses, challenges, and opportunities of carbon-based materials applied in heavy metal polluted soil remediation.

The application of carbon-based materials (CBMs) for heavy metal polluted soil remediation has gained growing interest due to their versatile properties and excellent remediation performance. Although the progresses on applications of CBMs in removing heavy metal from aqueous solution and their corresponding mechanisms were well known, comprehensive review on applications of CBMs in heavy metal polluted soil remediation were less identified. Therefore, this review provided insights into advanced progresses on utilization of typical CBMs including biochar, activated carbon, graphene, graphene oxide, carbon nanotubes, and carbon black for heavy metal polluted soil remediation. The mechanisms of CBM remediation of heavy metals in soil were summarized, mainly including physical adsorption, precipitation, complexation, electrostatic interaction, and cationic-π coordination. The key factors affecting the remediation effect include soil pH, organic matter, minerals, microorganisms, coexisting ions, moisture, and material size. Disadvantages of CBMs were also included, such as: potential health risks, high cost, and difficulty in achieving co-passivation of anions and cations. This work will contribute to our understanding of current research advances, challenges, and opportunities for CBMs remediation of heavy metal-contaminated soils.

Interception of fertile soil phosphorus leaching with immobilization materials: Recent progresses, opportunities and challenges.

The non-point source pollution induced by phosphorus (P) leaching from fertile soils is accelerating the eutrophication phenomena in aqueous ecosystems. Herein, to alleviate and intercept the P leaching from the fertile soils, diverse P immobilization materials (PIM) which can transform labile P into stable P via a range of physicochemical and biological interactions have been adopted and received increasing research interest. However, the remediation mechanisms of different PIMs were complex and vary with soil properties and PIM application methods. In this review, the P fraction and mobility characteristics of different fertile soils were first introduced. Then, three kinds of PIM including inorganic materials (e.g., clay minerals and red mud), organic materials (e.g., polyacrylamide), and composites (e.g., modified biochar) applied in soil P leaching interception were concluded. The key factors (i.e., soil pH, soil texture, organic matter content and variable soil moisture) influencing PIM performance and potential PIMs used for reducing soil P leaching were also introduced. Current review can favor for proposing more suitable and insightful strategies to regulate the fertile soil P and achieve the dual goals of improving the crop land quality and yield, and preventing agricultural non-point source pollution.

Identifying biotic and abiotic processes of reversing biochar-induced soil phosphorus leaching through biochar modification with MgAl layered (hydr)oxides.

Biochar (BC) as a increasing widely adopted soil amendments showed potential threat to soil P leaching, but the relevant mechanisms were not clear enough and relevant strategy should be proposed to address the P leaching induced by BC application. In this study, effects of ordinary corn straw BC, and a fabricated Mg/Al-LDHs modified biochar (LBC) on soil P availability, adsorption, fraction and mobility were compared and investigated by conducting the column and incubation experiments at biochar to soil rate of 1 %, 2 % and 4 % (w/w). Chemical sequential extraction methods and various solid-state method (i.e., three-dimensional excitation emission matrix (EEM), x-ray diffraction (XRD), scanning electron micrograph (SEM) and P K-edge X-ray absorption near edge structure (XANES)) were utilized to give deep insights into the P mobilization and immobilization mechanisms by respectively applying the BC and LBC. Results of incubation experiments showed that applying the LBC reduced the labile P with significant CaP transformation to Al-retained P, while ordinary BC promoted the Fe/Al-P transformation to labile dibasic calcium phosphate and monobasic calcium phosphate evidenced by the EEM analysis, in-situ XANES investigation and chemical sequential extraction methods. Results of phosphatase and microbial analyses indicated that the decreased labile P after 30 days' incubation and the mitigated P leaching in LBC treatment were dominantly ascribed to abiotic processes of inorganic P transformation and (de)sorption. This research gave deep insights into abiotic and biotic processes of ordinary biochar promoting soil P leaching, and important implications for applying engineered biochar in reducing P leaching and improving soil productivity.

Nature-based solutions for securing contributions of water, food, and energy in an urban environment.

There is growing awareness that nature-based solutions (NBS) prevent negative effects and secure ecosystem services. However, the potential of NBS to provide intended benefits has not been rigorously assessed. Water, food, and energy (WFE) are essential for human well-being. This study highlights the importance of NBS in terms of water, food, and energy. A set of on-site NBS that includes permeable pavements, plant microbial fuel cells, bio-filtration basins, and rain gardens is used to determine the contribution of NBS to the environmental and economic development of urban environments. The results of this study show that NBSs benefit an urban environment in terms of water treatment, stormwater retention, food production and energy generation, carbon sequestration, pollination, sedimentation retention, and cultural services dimension. This research highlights an urgent need for the integration of water, food, and energy plans to ensure that NBSs contribute to the environment and for the conservation of ecosystem services.

Comparative study on the removal of organic pollutants by magnetic composite and pre-magnetized zero-valent iron activated persulfate.

The rapid development of global logistics has led to the overuse of packaging cartons, causing problems for municipal solid waste disposal. Diverse methods of exploiting the potential value of waste cartons are needed. Herein, we fabricated a magnetic composite (MC) from waste cartons via a one-step hydrothermal treatment and characterized. Using methylene blue (MB) as a model organic pollutant, tests of the activation of persulfate (PS) via the MC for the removal of MB were performed. Meanwhile, a comparison with activation with pre-magnetized zero-valent iron (Pre-ZVI/PS) was made. The comparative results show that the removal of MB was successfully accomplished with both Pre-ZVI/PS and MC/PS. Specifically, MC/PS could remove almost 100 % of MB, with the COD removal efficiency reaching over 70 % when the MB concentration was 50 mg/L at 80 min under different pH conditions. Even when reused twice, the MC still displayed robust activation performance. Additionally, we evaluated the lifetime of magnetic memory for Pre-ZVI, and first found its consecutive loss of pre-magnetization over 30 days, corresponding to the incremental attenuation of reaction rate constants in the Pre-ZVI-activated PS process. Overall, activating PS using the MC is a promising advanced oxidation technology and also provides a valuable reference on the valorization of lignocellulosic biomass.

A combined management scheme to simultaneously mitigate As and Cd concentrations in rice cultivated in contaminated paddy soil.

Paddy soils in southern China are heavily co-polluted by arsenic (As) and cadmium (Cd). The accumulation of these contaminants in rice grains may pose a high health risk. We evaluated the impact of adjusted water management practice (i.e., conventional irrigation and aerobic treatment after heading stage) and the application of two immobilization agents (i.e., CaO and Fe2O3) on the accumulation of As and Cd in rice grains of three rice varieties (i.e., Jinyou-463, Jinyou-268, and Mabayouzhan). The different schemes were tested via conducting a field experiment in paddy soil in Shaoguan, Guangdong Province, China. The results showed that the combined scheme (selecting Jinyou-268, aerobic water management after the heading stage, and 0.09% CaO and 0.5% Fe2O3 amendments) exhibited the best performance in the reduction of As and Cd accumulation in rice grains. This combined scheme decreased the grain As concentration by 26.19% and maintained the Cd at a low level (0.056 mg/kg) as compared to the use of local conventional irrigation patterns. Moreover, health risk assessment demonstrated that by applying the optimal scheme, neither As nor Cd content in rice had carcinogenic risk. However, the grain As remains at a high non-carcinogenic risk. We suggest that future field study design should fully incorporate the uncertainty of the natural environment to make the research conclusions more feasible for popularization and utilization. This study demonstrated an approach of utilizing the synergy effects of various measures for safe rice production in fields subjected to As and Cd contaminations.

New insights into ball milling effects on MgAl-LDHs exfoliation on biochar support: A case study for cadmium adsorption.

Ball milling (BM) as a solvent-free technology has been widely used to tailor the biochar-based adsorbents with high porosity and well dispersion for enhancing their environmental applications. In this study, the ball-milled layered double hydroxides (LDHs) biochar composite (B-LDHs-BC) was successfully fabricated with BM method for Cd(II) adsorption and the BM effects on the LDHs-BC structure-performance relationships were investigated. The solid-state characterization demonstrated the LDHs were successfully exfoliated by BM on the B-LDHs-BC surface which was identified by the enlarged basal spacing and reduced crystallite size of the LDHs. Although the BET surface area of B-LDHs-BC (226 m2/g) was slightly lower than the ball-milled BC, the B-LDHs-BC had more O-containing functional groups and higher adsorption capacity (119 mg/g). The kinetics experiments indicated that the Cd(II) removal by B-LDHs-BC was through both the physical and chemical adsorption processes, and the liquid membrane diffusion was the rate-controlling step. The positive BM effects mainly induced more abundant acidic functional groups and active adsorption sites, and thus enhanced Cd(II) performance of B-LDHs-BC. This work demonstrated a facile solvent-free method for production of the exfoliated LDHs modified BC composite, and also well illustrated the BM effects which can extend their practical use in environment.

Effects of bamboo biochar on nitrogen conservation during co-composting of layer manure and spent mushroom substrate.

Layer manure (LM) and spent mushroom substrate (SMS) are two kinds of nitrogen (N) rich solid wastes generate in the poultry breeding and agriculture production. Composting is an effective way to recycle the LM and SMS. However, a large amount of N in the LM and SMS was lost via volatilisation during composting, with negative environmental and economic consequences. This study investigated the effect of incorporating biochar at the ratio of 5%, 10%, and 15% (w/w) during co-composting of LM and SMS on ammonia (NH3) and nitrogen oxide (N2O) volatilisation and N retention. After the 35-day composting, the results showed that the pile temperature and seed germination index in biochar treatments were significantly improved in comparison with control treatment. The nitrogen in all treatments was lost in the form of N2O (0.05∼0.1%) and NH3 (13.1∼20.2%). Likewise, the total nitrogen loss was 28.9%, 20.3%, and 24.9%, respectively, of which N2O-N accounts for 0.05∼0.10%. Compared with control treatment, the total amount of NH3 volatilisation in biochar treatments of 5%BC, 10%BC and 15%BC was decreased by 21.2%, 33.1%, and 26.1%, respectively. The total amount of N2O emission was decreased by 39.0%, 13.2%, and 1.6%, respectively. Adding 10% and 15% biochar can significantly reduce NH3 volatilisation while adding 5% biochar treatment didn't significantly reduce NH3 emissions but showed the best performance in reducing N2O emission. The addition of 10% biochar in co-composting of LM and SMS is the recommended dosage that exhibited the best performance in improving composting quality and reducing nitrogen loss.

Evaluation of plant microbial fuel cells for urban green roofs in a subtropical metropolis.

Plant microbial fuel cells (PMFCs) is a sustainable technology that can convert sunlight to electricity through the integration of plants, microorganism and electrode systems. Urban greening, such as green roofs, is considered as one of the measures to resolve the urban heat island effect caused by the increasing urbanization. In this study, PMFCs were installed as green roofs in a subtropical metropolis. During the operation, the biomass of Chinese pennisetum, Dwarf rotala, and Narrowleaf cattail increased from spring to summer. Furthermore, the maximum daily average output voltage of Chinese pennisetum and Narrowleaf cattail PMFCs was 667.94 ± 128.65 mV in March and 451.12 ± 94.37 mV in June, respectively. For no plant conditions, the maximum daily average output voltage of soil MFCs was 243.70 ± 128.93 mV in March and 100.16 ± 23.43 mV in June. However, little output voltage of Dwarf rotala PMFCs indicated different plant species in PMFC systems would result in varied efficiencies of electricity generation. The trends of electricity generation in Chinese pennisetum and Narrowleaf cattail PMFCs were influenced by net solar radiation and air temperature, respectively according to the results of correlation analysis. The PMFCs based green roofs could lower the temperature of underneath floor slabs as many as 24.81 °C and 29.37 °C compared with bare slabs at noon in March and June. Vegetation of the PMFCs could relieve soil heat flux, and simulated results showed Chinese pennisetum PMFCs with higher vegetation had lower U-value for energy savings of air conditioning. Microbial community analysis showed Geobacter was among the dominant genera and had higher relative abundance in anode soils than cathode soils in Chinese pennisetum and Narrowleaf cattail PMFCs, which generated higher output voltage. Our roof-top research demonstrated that using PMFCs based green roofs for urban greening is promising and warrants the potential for future application.

Contrasting abiotic As(III) immobilization by undissolved and dissolved fractions of biochar in Ca2+-rich groundwater under anoxic conditions.

Engineered black carbon (biochar) can be introduced into groundwater through its extensive engineered applications (e.g., in-situ remediation of groundwater/soils), which can participate in geochemical processes that may alter the fate of trace contaminants such as arsenic (As(III)). Here we examined the impacts of the undissolved and dissolved fractions of reduced biochar (hereafter denoted as rUBC and rDBC, respectively) on the As(III) immobilization in the absence/presence of Ca2+ (50 mM) at pH 11.5 under anoxic conditions. While neither rUBC nor rDBC alone was capable of immobilizing As(III), the apparent As(III) immobilization by rUBC and rDBC synergistically occurred in the presence of Ca2+, with an efficiency of 73.1% and 89.6% within 24 h, respectively. In the rUBC/Ca2+/As(III) system, rUBC enabled full oxidation of As(III) to As(V) by its residual redox-active moieties such as quinoid CO and persistent free radicals, thereby facilitating precipitation of the newly generated As(V) with Ca2+ adsorbed onto the rUBC's surface. In contrast, rDBC induced in-situ local enrichment of Ca2+ in the nascent rDBC-derived flocs with predominant non-oxidative and slight oxidative precipitation of As(III) via ternary rDBC-Ca-As complexation. This ternary complex was created by Ca2+-bridging interactions between As species and oxygen-containing functional groups of rDBC, as evidenced by the FTIR results and the Ca2+-impeded As(III) oxidation. The generation of the flocs physically trapped a small amount of As species particularly As(III). Both the increases in Ca2+ concentration (0-100 mM) and solution pH (10.0-12.5) enhanced the apparent As(III) immobilization. This study provides new insights into the environmental impacts of two reduced biochar fractions released into typical Ca2+-rich aquifers on the fate and transport of As species.

Arsenic adsorption on layered double hydroxides biochars and their amended red and calcareous soils.

Highly efficient amendments for controlling arsenic (As) pollution in soils are imperative to improve soil quality and enhance food production. In the present study, corn stalk biochar was functionalized with three kinds of layered double hydroxides (i.e., Mg-Al-LDH, Zn-Al-LDH, and Cu-Al-LDH) using a simple co-precipitation method. The synthesized LDH biochar composites (LDH@BCs) exhibited better adsorption capacity and affinity for As due to their enhanced anion exchange capacity and reactive surface hydroxyl groups identified by XRD, FTIR and XPS. Arsenic (As) bioavailability and leaching characteristics of spiked red and calcareous soils (150 mg As/kg) amended with or without LDH@BCs were investigated using soil column. The Zn-Al-LDH@BC decreased the As (V) migration and increased pak choi (Brassica chinensis L.) growth in both red and calcareous soil. These results indicated that LDH modified biochar is an effective way to overcome the shortfalls of unmodified biochar in mitigating the As contamination and provide a basis for further exploring the potential of biochar-based soil amendments for environmental remediation.

Stratified chemical and microbial characteristics between anode and cathode after long-term operation of plant microbial fuel cells for remediation of metal contaminated soils.

The plant microbial fuel cell (PMFC) is considered as a sustainable technology in which plants, microbes, and electrochemical cells are the major components and have the synergistic effect on electricity generation. Recent study has demonstrated the use of the PMFC system for remediation of hexavalent chromium (Cr(VI)) contaminated soils; however, the electrokinetic effects, fate of Cr and microbial community shift after long-term operation of PMFCs still need to be unveiled. In this study, PMFCs with spiking 50 mg/kg Cr(VI) were operated over 10 months and chemical and microbial characteristics of different locations of PMFC systems were investigated. Distinct chemical and microbial properties for different locations of soil samples were observed within PMFCs. For instance, the pH values of soils around the cathode and anode (cathode and anode soils) in PMFCs with Chinese pennisetum (Chinese pennisetum PMFCs) were 7.03 ±â€¯0.15 and 6.09 ±â€¯0.05 respectively, showing significantly higher pH values of cathode soils than those of anode soils. The electrical conductivity (EC) of cathode and anode soils in Chinese pennisetum PMFCs was 78.00 ±â€¯5.61 and 156.25 ±â€¯7.89 µs/cm respectively, showing significantly lower ECs of cathode soils than those of anode soils. The total Cr of cathode and anode soils in Chinese pennisetum PMFCs was 65.75 ±â€¯3.77 and 84.29 ±â€¯2.87 mg/kg respectively, showing significantly lower total Cr of cathode soils than that of anode soils. The permutational multivariate analysis of variance test of results of 16S rRNA gene high-throughput sequencing revealed that microbial communities in anode and cathode samples had significant difference in compositions. The stratified chemical and microbial characteristics between anode and cathode were primarily driven by the bioelectrochemical processes and electrokinetic effects within PMFCs. The findings in this study help to better understand the underlying effects of operating PMFCs and will be beneficial for future application of PMFCs in the remediation of heavy metal-contaminated soils.

Wetland plant microbial fuel cells for remediation of hexavalent chromium contaminated soils and electricity production.

The plant microbial fuel cell (PMFC) is a novel technology which integrates plants, microbes, and electrochemical elements together to create renewable energy. However, information regarding using the PMFC system to remediate metal-contaminated soils is still limited. In this study, we evaluate the potential of PMFC systems to remediate soils polluted by Cr(VI). We compare different plants and different electrode materials with regard to their electricity generation and Cr(VI) removals under different soil Cr(VI) concentrations. In PMFC systems, the soil pH was transformed from slightly acidic to neutral, and the electrical conductivity was reduced during operation. The removal efficiency of Cr(VI) in soils could reach 99%, and the total Cr of soils could also be reduced. The closed circuit voltage of PMFC systems of Chinese pennisetum using the graphite carbon felt as the electrodes could reach the daily average value of 469.21 mV. PMFC systems have successfully demonstrated the ability to remove Cr(VI) from soils collected from actual metal-contaminated sites. Our results suggest that using PMFCs to remediate contaminated soils is promising, and the effects of decontamination are mostly contributed by bioelectrochemical processes and plant uptake.

Impact of flood damage on pollutant removal efficiencies of a subtropical urban constructed wetland.

Typhoons and hurricanes in subtropical/tropical regions can induce significant environmental changes (e.g., mass flooding and inundations). However, the damage to the pollutant removal efficiencies of constructed wetlands brought about by these natural disturbances has been neglected in major studies conducted in temperate climates. Therefore, this study compares the pollutant removal performance of a constructed wetland in the Danshui River Basin, before and after the system was inundated with flooding from Typhoon Krosa in 2007. The pollutant removal performance of the free water surface (FWS) constructed wetland was investigated monthly from September 2006 to April 2008. Results of the study demonstrated that this FWS wetland effectively removed 64.3% BOD, 98.9% NH(4)-N, and 39.5% Total-P before Typhoon Krosa. However, the extensive flooding caused by Typhoon Krosa swept over most of the aboveground plant community and deposited the sediment onto the bottom of each compartment. Subsequently, reduced pollutant removal efficiencies were observed. Only 37.7% BOD, 35.1% NH(4)-N, and 31.8% Total-P were removed after this event, although the flow regime was immediately restored. Comparing the water quality data for the FWS wetland before and after Typhoon Krosa revealed the immediate, quantitative damage to the pollutant removal performance caused by the typhoon's inundation. Consequently, a high-flow bypass and additional preventive measures would protect any constructed wetland in areas subject to typhoons.