2-Cyanopropan-2-yl versus 1-Cyanocyclohex-1-yl Leaving Group: Comparing Reactivities of Symmetrical Trithiocarbonates in RAFT Polymerization.

This study introduces bis(1-cyanocyclohex-1-yl)trithiocarbonate (TTC-bCCH) as a novel trithiocarbonate chain transfer agent and compares its reactivity with the previously described bis(2-cyanopropan-2-yl)trithiocarbonate (TTC-bCP) for the reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene (St), n-butyl acrylate (nBA), and methyl methacrylate (MMA). Significant findings include the effective control of Mn and low dispersities from the onset of polymerization of St and nBA showing swift addition-fragmentation kinetics, leading to similar behaviors between the two RAFT agents. In contrast, a fourfold decrease of the chain transfer constant to MMA is established for TTC-bCCH over TTC-bCP. This trend is confirmed through density functional theory (DFT) calculations. Finally, the study compares thermoplastic elastomer properties of all-(meth)acrylic ABA block copolymers produced with both RAFT agents. The impact of dispersity of PMMA blocks on thermomechanical properties evaluated via rheological analysis reveals a more pronounced temperature dependence of the storage modulus (G') for the triblock copolymer synthesized with TTC-bCCH, indicating potential alteration of the phase separation.

Exploring the Limits of High-Tg Epoxy Vitrimers Produced through Resin-Transfer Molding.

Over the past few years, scientists have developed new ways to overcome the recycling issues of conventional thermosets with the introduction of associative covalent adaptable networks (i.e., vitrimers) in polymer materials. Even though various end-use vitrimers have already been reported, just a few of them have targeted high-performance industrial applications. Herein, we develop a promising high-performance epoxy vitrimer based on a commercially available resin widely used in aeronautics with the highest glass transition temperature (Tg) of 233 °C ever reported for a vitrimer. A complete study of its physicochemical properties and cure kinetics was conducted, enabling the construction of the first time-temperature-transformation (TTT) diagram reported in the literature. This diagram allows a full determination of the processing and curing parameters leading to the manufacturing of vitrimer samples by the resin-transfer molding (RTM) process. The reshapability and limits therefrom of this high-Tg vitrimer were evaluated by three successful thermoforming cycles without degradation.

Vanillin-Based Epoxy Vitrimers: Looking at the Cystamine Hardener from a Different Perspective.

Epoxy vitrimers encompass many advantages compared to traditional epoxy materials such as recyclability, repairability, and reprocessability. These properties are induced by the incorporation of dynamic reversible covalent bonds. Recently, the incorporation of aromatic disulfide bridges that are dynamic has expanded the development of new eco-friendly epoxy materials. Herein, we studied a bio-based aliphatic disulfide based on cystamine as a hardener with a vanillin-derived bio-sourced epoxy to prepare fully bio-based epoxy vitrimers. This article provides a comparative study between cystamine and an aromatic disulfide benchmark hardener issued from petrol resources. This work demonstrated that the presence of this aliphatic hardener has a significant influence not only on the reactivity, but most importantly on the resulting dynamic properties. An interesting yet counterintuitive accelerating effect of the dynamic exchanges was clearly demonstrated with only 2 to 20% of molar fraction of cystamine added to the aromatic disulfide formulation. A similar glass transition was obtained compared to the purely aromatic analogue, but relaxation times were decreased by an order of magnitude.

Azo-Derived Symmetrical Trithiocarbonate for Unprecedented RAFT Control.

Bis(2-cyanopropan-2-yl)trithiocarbonate (TTC-bCP) is a new symmetrical trithiocarbonate with the best leaving group ever reported for reversible addition-fragmentation chain transfer (RAFT) polymerization. We propose an elegant route to obtain TTC-bCP starting from 2,2'-azobis(2-methylpropionitrile) (AIBN) as a donor of the 2-cyanopropan-2-yl group. TTC-bCP allowed the preparation of a high-molar-mass (Mn ≈ 135 kg mol-1) methyl methacrylate-n-butyl acrylate-methyl methacrylate triblock copolymer with unprecedented control (D̵ = 1.04) in reversible-deactivation radical polymerization. Rheology measurements of this triblock copolymer showed a typical thermoplastic elastomer behavior with a steady rubbery plateau up to 120 °C.

Covalent Adaptable Networks Using ß-Amino Esters as Thermally Reversible Building Blocks.

In this study, ß-amino esters, prepared by the aza-Michael addition of an amine to an acrylate moiety, are investigated as building blocks for the formation of dynamic covalent networks. While such amino esters are usually considered as thermally nondynamic adducts, the kinetic model studies presented here show that dynamic covalent exchange occurs via both dynamic aza-Michael reaction and catalyst-free transesterification. This knowledge is transferred to create ß-amino ester-based covalent adaptable networks (CANs) with coexisting dissociative and associative covalent dynamic exchange reactions. The ease, robustness, and versatility of this chemistry are demonstrated by using a variety of readily available multifunctional acrylates and amines. The presented CANs are reprocessed via either a dynamic aza-Michael reaction or a catalyst-free transesterification in the presence of hydroxyl moieties. This results in reprocessable, densely cross-linked materials with a glass transition temperature (Tg) ranging from -60 to 90 °C. Moreover, even for the low Tg materials, a high creep resistance was demonstrated at elevated temperatures up to 80 °C. When additional ß-hydroxyl group-containing building blocks are applied during the network design, an enhanced neighboring group participation effect allows reprocessing of materials up to 10 times at 150 °C within 30 min while maintaining their material properties.

Surface Modification of (Non)-Fluorinated Vitrimers through Dynamic Transamination.

Surface modifications are typically permanent in shape and chemistry. Herein, vinylogous urethane (VU) chemistry is presented as an easily accessible and versatile platform for rapid, facile, and reworkable surface modification. It is demonstrated that both physical and chemical post-modification of permanent, yet dynamic elastic polymer networks are achieved. Surface patterns with high regularity are created, both via a straightforward replication process using a polydimethylsiloxane stamp (resolution ca. 10-100 µm) as well as using thermally activated nano-imprint lithography (NIL) to form hole, pillar, or line patterns (ca. 300 nm) in elastic VU-based vitrimers. The tunable, rapid exchange allows patterning at 130 °C in less than 15 min, resulting in an increased water contact angle and surface-structure induced light reflection. Moreover, it is also demonstrated that the use of a single dynamic covalent chemistry makes it possible to strongly adhere to fluorinated and non-fluorinated materials based on incompatible matrices, causing cohesive failure in a peel test. In a topography scan, the visibly transparent interface is shown to possess a continuous phase without a gap, while maintaining distinctively separated (non)-fluorinated domains. Finally, this approach allowed for a straightforward coating of a non-fluorinated material with a fluorinated monomer to minimize the overall fluorinated content.

Vitrimers: directing chemical reactivity to control material properties.

The development of more sustainable materials with a prolonged useful lifetime is a key requirement for a transition towards a more circular economy. However, polymer materials that are long-lasting and highly durable also tend to have a limited application potential for re-use. This is because such materials derive their durable properties from a high degree of chemical connectivity, resulting in rigid meshes or networks of polymer chains with a high intrinsic resistance to deformation. Once such polymers are fully synthesised, thermal (re)processing becomes hard (or impossible) to achieve without damaging the degree of chemical connectivity, and most recycling options quickly lead to a drop or even loss of material properties. In this context, both academic and industrial researchers have taken a keen interest in materials design that combines high degrees of chemical connectivity with an improved thermal (re)processability, mediated through a dynamic exchange reaction of covalent bonds. In particular vitrimer materials offer a promising concept because they completely maintain their degree of chemical connectivity at all times, yet can show a clear thermally driven plasticity and liquid behavior, enabled through rapid bond rearrangement reactions within the network. In the past decade, many suitable dynamic covalent chemistries were developed to create vitrimer materials, and are now applicable to a wide range of polymer matrices. The material properties of vitrimers, however, do not solely rely on the chemical structure of the polymer matrix, but also on the chemical reactivity of the dynamic bonds. Thus, chemical reactivity considerations become an integral part of material design, which has to take into account for example catalytic and cross-reactivity effects. This mini-review will aim to provide an overview of recent efforts aimed at understanding and controlling dynamic cross-linking reactions within vitrimers, and how directing this chemical reactivity can be used as a handle to steer material properties. Hence, it is shown how a focus on a fundamental chemical understanding can pave the way towards new sustainable materials and applications.

Covalent Adaptable Networks with Tunable Exchange Rates Based on Reversible Thiol-yne Cross-Linking.

The design of covalent adaptable networks (CANs) relies on the ability to trigger the rearrangement of bonds within a polymer network. Simple activated alkynes are now used as versatile reversible cross-linkers for thiols. The click-like thiol-yne cross-linking reaction readily enables network synthesis from polythiols through a double Michael addition with a reversible and tunable second addition step. The resulting thioacetal cross-linking moieties are robust but dynamic linkages. A series of different activated alkynes have been synthesized and systematically probed for their ability to produce dynamic thioacetal linkages, both in kinetic studies of small molecule models, as well as in stress relaxation and creep measurements on thiol-yne-based CANs. The results are further rationalized by DFT calculations, showing that the bond exchange rates can be significantly influenced by the choice of the activated alkyne cross-linker.

π-Stacking Interactions of Graphene-Coated Cobalt Magnetic Nanoparticles with Pyrene-Tagged Dendritic Poly(Vinylidene Fluoride).

This study investigates the non-covalent coating of cobalt magnetic nanoparticles (MNPs) involving a graphene surface with pyrene-tagged dendritic poly(vinylidene fluoride) (PVDF). Dendrimers bearing a pyrene moiety were selected to play the role of spacers between the graphene surface of the MNPs and the PVDF chains, the pyrene unit being expected to interact with the surface of the MNPs. The pyrene-tagged dendritic spacer 11 decorated with ten acetylenic units was prepared and fully characterized. Azido-functionalized PVDF chains were then grafted onto each branch of the dendrimer using Huisgen's [3+2] cycloaddition reaction. Next, the association of the resulting pyrene-tagged dendritic PVDF 13 with commercially available Co/C MNPs by π-stacking interactions was studied by fluorescence spectroscopy. Evaluated were the stability of the π-stacking interactions when the temperature increased and the reversibility of the process when the temperature decreased. Also, hybrid MNPs were prepared from pyrene-tagged dendrimers decorated either with acetylenic functions (11) or with PVDF branches (13), and they were characterized by transmission electron microscopy and comparative elemental analysis was carried out with naked MNPs.

Fluorinated Vitrimer Elastomers with a Dual Temperature Response.

Vitrimers are an emerging new class of permanently cross-linked polymeric materials that show a liquid behavior upon heating wherein the macroscopic deformation is controlled by the rate of internal chemical bond exchange reactions. Thus, quite uniquely among polymeric materials, flow rates and material viscosities can be enhanced or controlled by the addition of catalysts and additives. We now report a catalyst-free vitrimer system, prepared from mixing two simple components, wherein two competing bond exchange mechanisms coexist, each showing a strikingly different temperature dependence, related to the large difference in activation energy for the different exchange pathways (60 vs 130-170 kJ/mol). The low barrier process is predominant at lower temperatures, but is outcompeted by the high barrier process that becomes dominant at higher temperatures because of its much more pronounced temperature dependence. The result is an interesting and highly unusual dual viscosity profile for this new class of vitrimer materials: a very gradual decrease in viscosity at lower temperatures, intercepted by a much sharper drop in viscosity at higher temperatures. The highly counterintuitive effect where a higher barrier pathway is dominant over a much lower barrier process can be rationalized by the exchange mechanisms that involve different reactive species, but lead to the overall same exchange. We observed this unusual but highly promising behavior first for fluorinated vitrimer elastomers, aimed at high performance materials, but the effect was also shown to hold in related nonfluorinated elastomers. A new way to control and design the rheological behavior of vitrimers toward finely tuned and precisely controlled processing applications has thus been provided.

Combination of Cationic and Radical RAFT Polymerizations: A Versatile Route to Well-Defined Poly(ethyl vinyl ether)-block-poly(vinylidene fluoride) Block Copolymers.

Poly(vinylidene fluoride)-containing block copolymers are difficult to prepare and still very rare in spite of their potential use in high added value applications. This communication describes in detail the synthesis of unprecedented poly(ethyl vinyl ether)-block-poly(vinylidene fluoride) (PEVE-b-PVDF) block copolymers (BCP) via the sequential combination of cationic RAFT polymerization of vinyl ethers and radical RAFT polymerization of vinylidene fluoride (VDF). Dithiocarbamate chain transfer agents were found to efficiently control the radical RAFT polymerization of VDF and to be suitable for the preparation of PEVE-b-PVDF BCP. These new block copolymers composed of incompatible polymer segments may find applications owing to their phase segregation and self-assembly behavior.