Valorization and Potential Antimicrobial Use of Olive Mill Wastewater (OMW) from Italian Olive Oil Production.

The production of olive oil generates olive mill wastewater (OMW) which essentially derives from the processing, treatment and pressing of olives in mills. Traditional milling processes require a quantity of water varying between 40 and 120 L per quintal of pressed olives, generating a considerable amount of wastewater. It is thus necessary to reduce process water and enhance its use to implement the concept of a circular economy. To this end, our preliminary work was dedicated to water purification by means of suitable and efficient filtration systems. The microfiltered OMW was firstly concentrated through reverse osmosis. Then, an additional concentration step was carried out via vacuum membrane distillation using hydrophobic hollow fiber membranes. The application of the membrane-based processes allowed the recovery of a purified water and the concentration of valuable polyphenols in a smaller volume. The different fractions obtained from the purification have been tested for the determination of the antioxidant power (DPPH assay) and dosage of polyphenols (Folin-Ciocalteu assay) and were characterized using IR spectroscopy. All samples showed relevant antioxidant activity (percentage range: 10-80%) and total phenolic content in the 1.5-15 g GAE/L range. The obtained fractions were tested for their antimicrobial effect on numerous clinical isolates of Gram-positive and Gram-negative species, resistant and multi-resistant to current antibiotic drugs. OMW samples showed widespread activity against the considered (phyto)pathogens (MIC range 8-16 mg/mL) thus supporting the value of this waste material in the (phyto)pharmaceutical field.

High blood flow shear stress values are associated with circulating tumor cells cluster disaggregation in a multi-channel microfluidic device.

Metastasis represents a dynamic succession of events involving tumor cells which disseminate through the organism via the bloodstream. Circulating tumor cells (CTCs) can flow the bloodstream as single cells or as multicellular aggregates (clusters), which present a different potential to metastasize. The effects of the bloodstream-related physical constraints, such as hemodynamic wall shear stress (WSS), on CTC clusters are still unclear. Therefore, we developed, upon theoretical and CFD modeling, a new multichannel microfluidic device able to simultaneously reproduce different WSS characterizing the human circulatory system, where to analyze the correlation between SS and CTC clusters behavior. Three physiological WSS levels (i.e. 2, 5, 20 dyn/cm2) were generated, reproducing values typical of capillaries, veins and arteries. As first validation, triple-negative breast cancer cells (MDA-MB-231) were injected as single CTCs showing that higher values of WSS are correlated with a decreased viability. Next, the SS-mediated disaggregation of CTC clusters was computationally investigated in a vessels-mimicking domain. Finally, CTC clusters were injected within the three different circuits and subjected to the three different WSS, revealing that increasing WSS levels are associated with a raising clusters disaggregation after 6 hours of circulation. These results suggest that our device may represent a valid in vitro tool to carry out systematic studies on the biological significance of blood flow mechanical forces and eventually to promote new strategies for anticancer therapy.

Nanofluidic-Based Accumulation of Antigens for Miniaturized Immunoassay.

The continuous advances of Nanofluidics have been stimulating the development of novel nanostructures and strategies to accumulate very diluted analytes, for implementing a new class of high sensitivity miniaturized polymeric sensors. We take advantage of the electrokinetic properties of these structures, which allow accumulating analytes inside asymmetric microfluidic structures to implement miniaturized sensors able to detect diluted solutions down to nearly 1.2 pg/mL. In particular, exploiting polydimethylsiloxane devices, fabricated by using the junction gap breakdown technique, we concentrate antigens inside a thin microfunnel functionalized with specific antibodies to favor the interaction and, if it is the case, the recognition between antigens in solution and antibodies anchored to the surface. The transduction mechanism consists in detecting the fluorescence signal of labeled avidin when it binds to biotinylated antigens. Here, we demonstrate that exploiting these electrokinetic phenomena, typical of nanofluidic structures, we succeeded in concentrating biomolecules in correspondence of a 1 pL sensing region, a strategy that grants to the device performance comparable to standard immunoassays.

Integrating Microstructured Electrospun Scaffolds in an Open Microfluidic System for in Vitro Studies of Human Patient-Derived Primary Cells.

Recent studies have suggested that microenvironmental stimuli play a significant role in regulating cellular proliferation and migration, as well as in modulating self-renewal and differentiation processes of mammary cells with stem cell (SCs) properties. Recent advances in micro/nanotechnology and biomaterial synthesis/engineering currently enable the fabrication of innovative tissue culture platforms suitable for maintenance and differentiation of SCs in vitro. Here, we report the design and fabrication of an open microfluidic device (OMD) integrating removable poly(ε-caprolactone) (PCL) based electrospun scaffolds, and we demonstrate that the OMD allows investigation of the behavior of human cells during in vitro culture in real time. Electrospun scaffolds with modified surface topography and chemistry can influence attachment, proliferation, and differentiation of mammary SCs and epigenetic mechanisms that maintain luminal cell identity as a function of specific morphological or biochemical cues imparted by tailor-made fiber post-treatments. Meanwhile, the OMD architecture allows control of cell seeding and culture conditions to collect more accurate and informative in vitro assays. In perspective, integrated systems could be tailor-made to mimic specific physiological conditions of the local microenvironment and then analyze the response from screening specific drugs for more effective diagnostics, long-term prognostics, and disease intervention in personalized medicine.

Increased Flexibility in Lab-on-Chip Design with a Polymer Patchwork Approach.

Nanofluidic structures are often the key element of many lab-on-chips for biomedical and environmental applications. The demand for these devices to be able to perform increasingly complex tasks triggers a request for increasing the performance of the fabrication methods. Soft lithography and poly(dimethylsiloxane) (PDMS) have since long been the basic ingredients for producing low-cost, biocompatible and flexible devices, replicating nanostructured masters. However, when the desired functionalities require the fabrication of shallow channels, the "roof collapse" phenomenon, that can occur when sealing the replica, can impair the device functionalities. In this study, we demonstrate that a "focused drop-casting" of h-PDMS (hard PDMS) on nanostructured regions, provides the necessary stiffness to avoid roof collapse, without increasing the probability of deep cracks formation, a drawback that shows up in the peel-off step, when h-PDMS is used all over the device area. With this new approach, we efficiently fabricate working devices with reproducible sub-100 nm structures. We verify the absence of roof collapse and deep cracks by optical microscopy and, in order to assess the advantages that are introduced by the proposed technique, the acquired images are compared with those of cracked devices, whose top layer, of h-PDMS, and with those of collapsed devices, made of standard PDMS. The geometry of the critical regions is studied by atomic force microscopy of their resin casts. The electrical resistance of the nanochannels is measured and shown to be compatible with the estimates that can be obtained from the geometry. The simplicity of the method and its reliability make it suitable for increasing the fabrication yield and reducing the costs of nanofluidic polymeric lab-on-chips.

The Role of Surfaces in Gas Transport Through Polymer Membranes.

This paper describes a procedure to measure the permeability P, diffusivity D, and rate of adsorption k1, thus determining the solubility S and rate of desorption k2 of He, N2, O2, CH4, and CO2 on a polydimethylsiloxane (PDMS) membrane. The described procedure is able to determine experimentally all the physical quantities that characterize the gas transport process through a thin rubber polymer membrane. The experiments were carried out at room temperature and at a transmembrane pressure of 1 atm. The results are in good agreement with the available data in the literature and offer an evaluation of k1 and k2.

Engineered Kidney Tubules for Modeling Patient-Specific Diseases and Drug Discovery.

The lack of engineering systems able to faithfully reproduce complex kidney structures in vitro has made it difficult to efficiently model kidney diseases and development. Using polydimethylsiloxane (PDMS) scaffolds and a kidney-derived cell line we developed a system to rapidly engineer custom-made 3D tubules with typical renal epithelial properties. This system was successfully employed to engineer patient-specific tubules, to model polycystic kidney disease (PKD) and test drug efficacy, and to identify a potential new pharmacological treatment. By optimizing our system we constructed functional ureteric bud (UB)-like tubules from human induced pluripotent stem cells (iPSCs), and identified a combination of growth factors that induces budding morphogenesis like embryonic kidneys do. Finally, we applied this assay to investigate budding defects in UB-like tubules derived from a patient with a PAX2 mutation. Our system enables the modeling of human kidney disease and development, drug testing and discovery, and lays the groundwork for engineering anatomically correct kidney tissues in vitro and developing personalized medicine applications.

Gas permeation through rubbery polymer nano-corrugated membranes.

The purpose of this investigation is to fabricate PDMS membranes with reliable surface roughness in order to reduce the surface resistances and to study its impact on the permeation rate. The permeance of CO2 through PDMS membranes with rough surfaces at nanoscale is studied and compared with the one of membranes with flat surfaces. At very low thickness, rough membranes have a permeance greater than that of membranes with flat surfaces. The enhancement occurs in a regime where the gas transport is sorption desorption surface rate limited, and cannot be explained by the increase in surface area due to the corrugation. The analysis, introducing a phenomenological model in analogy with electrical flow, indicates that nano-corrugation reduces the surface resistance. To test the model, the permeance of N2 is also measured in the same experimental conditions and the influence of surface roughness on permeation rate of CO2, He, CH4 and N2 is studied. The comparison among the gases suggests that the Henry's coefficient depends on the surface roughness and allows discussing the role of roughness on membrane selectivity.

Simultaneous Electro-Optical Tracking for Nanoparticle Recognition and Counting.

We present the first detailed experimental observation and analysis of nanoparticle electrophoresis through a nanochannel obtained with synchronous high-bandwidth electrical and camera recordings. Optically determined particle diffusion coefficients agree with values extracted from fitting electrical transport measurements to distributions from 1D Fokker-Planck diffusion-drift theory. This combined tracking strategy enables optical recognition and electrical characterization of nanoparticles in solution, which can have a broad range of applications in biology and materials science.

Selective protein detection with a dsLNA-functionalized nanopore.

In the last years, nanopore technology has been increasingly exploited for biomolecule detection and analysis. Recently, the main focus of the research has moved from the study of nucleic acids to the analysis of proteins and DNA-protein complexes. In this paper, chemically functionalized solid-state nanopore has been used to recognize Nuclear Factor-kappa B proteins (NF-κB), that are involved in several disorders and inflammation processes, so that their identification is of crucial importance for prognostic applications. In particular, we show that it is possible to electrically detect the specific interaction between p50, a protein belonging to the NF-κB family, and dsLNA probe molecules covalently attached to the surface of a FIB fabricated SiN pore. The obtained results have been compared with those related to BSA protein, which does not interact with the used probes. Finally, the potential of the device has been further tested by analyzing a whole cell extract. In this case, three principal peaks in the distribution of electrical event duration can be identified, corresponding to different interacting NF-κB complexes, so that the methodology appears to be effective also to study biological samples of considerable complexity. Ultimately, the presented data emphasize the selectivity and versatility of the functionalized nanopore device, demonstrating its applicability in bioanalytics and advanced diagnostics.

The influence of calcium ions on nickel modulation of NMDA receptor currents.

N-Methyl-D-aspartate (NMDA) receptors (NRs) are glutamate-gated channels critical for the functioning of the nervous system. They are assembled from two types of subunits, the essential GluN1 and at least one type of GluN2 (A, B, C, D) subunit. Nickel (Ni) modulates the NR current in a way dependent on the GluN2 subunit present. Besides voltage-dependent and voltage-independent inhibition, in GluN2B-containing channels Ni enhances channel activity. We have recently identified several domains of the channel involved in Ni interaction, but many aspects of this modulation remain elusive. The purpose of the present work is to investigate the role of calcium (Ca) in the effect of Ni on the NR current measured by voltage- and patch-clamp in RNA-injected Xenopus laevis oocytes or in transiently transfected mammalian HEK293 cells expressing GluN1/GluN2B recombinant receptors. In both expression systems, in the presence of a physiological concentration of Ca (1.8 mM), Ni increased the NR current with EC(50) in the µM range, but this potentiation was reduced by decreasing Ca concentration or when Ca was substituted with Ba. In injected oocytes, the effect of Ni in 0.3 mM external Ba was only inhibitory (IC(50) = 65 µM). Increasing the internal calcium buffering by EGTA and BAPTA application, as well as incubation with cytoskeleton perturbing agents, colchicine and cytochalasin-D, did not produce major modifications in the Ni effect. These observations indicate that Ni-mediated potentiation is not dependent on Ca influx and internal Ca concentration, but it is dependent on external Ca, which possibly interacts with the extracellular portion of the protein through a modulatory binding site.

Molecular determinants of multiple effects of nickel on NMDA receptor channels.

Nickel (Ni2+) is a toxic metal that affects the function of several neuronal ionic channels. Ni2+ inhibits N-methyl-D: -aspartate receptor (NR) channel in a voltage-dependent manner, but also causes enhancement of NR2B-containing channel activity and voltage-independent inhibition of those containing NR2A. The present work was aimed to find the sites of Ni2+ interaction on the NR2A and NR2B subunits by expressing wild-type and mutated NRs in either HEK293 cells or Xenopus laevis oocytes. The point mutation N616G in the pore region of the NR2B subunit completely removed the voltage-dependent block. In NR2 subunits deleted for their entire amino terminal domain (ATD) and expressed with wild-type NR1 subunit, voltage-independent inhibition of NR2A-containing channels was not modified, but the potentiation effect was abolished in NR2B-containing channels. In the latter channels, potentiation of the current was also removed by H127A, D101A, D104A point mutations and by the double mutation H127AD101A, all located in lobe I of ATD, and reduced by the point mutation T233A in lobe II, suggesting that the interaction site that causes potentiation shares common determinants with the Zn2+ and ifenprodil binding sites. In contrast, in NR2A-containing channels, we postulate the existence of an additional divalent cation binding site in the M3-M4 extracellular loop. In these channels, the point mutation H801A in the NR2A subunit caused an important reduction of the voltage-independent block, with a 7-time increase in IC(50). The block was also partially, but not as prominently, reduced by the double mutation H705AH709A in the same region of NR1. This additional binding site can be responsible of specific heavy metal interaction with NR channels.

Investigations of pharmacologic properties of the renal CLC-K1 chloride channel co-expressed with barttin by the use of 2-(p-Chlorophenoxy)propionic acid derivatives and other structurally unrelated chloride channels blockers.

CLC-K chloride channels are expressed in the kidney, where they play a pivotal role in the mechanisms of urine concentration and Na(+) reabsorption. The identification of barttin as an essential beta-subunit of CLC-K channels allowed performance of a pharmacologic characterization of wild-type CLC-K1 expressed in Xenopus oocytes. To this end, a series of 2-(p-chlorophenoxy)propionic acid (CPP) derivatives were screened using the two-microelectrode voltage-clamp technique. Several chemical modifications regarding the phenoxy group of the side chain (elimination of the oxygen atom or of methylenic groups, substitutions of the chlorine atom) did not alter the drug blocking activity, with five different derivatives showing a similar potency. Among these, a derivative of CPP carrying a benzyl group on the chiral center in the place of the methyl group represented the minimal structure for blocking CLC-K1. It inhibited the channel from the extracellular side with an affinity in the 150 micro M range. The blocking potency of this compound is fourfold increased by lowering the extracellular chloride concentration, suggesting that the drug interacts with the channel pore. Concomitantly, the effect of some "classical" Cl(-) channel blockers (9-anthracenecarboxylic acid, 2-(phenylamino)benzoic acid, iminodibenzoic acid, niflumic acid, 5-nitro-2-(3-phenylpropylamino)benzoic acid, 4,4'-diisothiocyanato-2,2'-stilbenedisulfonic acid disodium salt, and 4-acetamido-4'-isothiocyanato-2,2'-stilbenedisulfonic acid disodium salt) was screened. 4,4'-Diisothiocyanato-2,2'-stilbenedisulfonic acid disodium salt was the only one capable of blocking CLC-K1 with a potency similar to the CPP derivative, although in an irreversible manner. The newly identified substances provide a useful tool to investigate the biophysical and physiologic role of these renal channels and a starting point for the development of therapeutic drugs with diuretic action.

Molecular requisites for drug binding to muscle CLC-1 and renal CLC-K channel revealed by the use of phenoxy-alkyl derivatives of 2-(p-chlorophenoxy)propionic acid.

CLC channels are a gene family of Cl(-) channels that serve a variety of functions, several of which are involved in genetic diseases. Few specific ligands of CLC channels are known that could be useful as pharmacological tools or potential drugs. We synthesized various derivatives of 2-(p-chlorophenoxy)propionic acid, the S(-)-enantiomer of which is a specific blocker of the muscle channel CLC-1. In particular, compounds with different alkyl or phenoxy-alkyl groups on the chiral center, isosteres of the oxygen in the aryloxy moiety, or bioisosteres of the carboxy function were prepared. We found that compounds containing a phenoxy and a phenoxy-alkyl group on the chiral center (bis-phenoxy derivatives) specifically inhibited renal CLC-K channels from the extracellular side with an affinity in the 150-microM range and with almost no effect on other CLC channels when applied from the outside. Surprisingly, the same substances inhibited CLC-1 from the intracellular side in a voltage-dependent manner with an apparent K(D) of <5 microM at -140 mV, thus being the most potent blockers of a CLC channel known so far. Although the chlorine atom in para- position of the second phenoxy group was essential for inhibition of CLC-K channels from the outside, it could be substituted by a methoxy group without changing the potency of block for CLC-1 from the inside. These newly identified substances provide powerful tools for studying the structure-function relationship and the physiological role of CLC channels and may represent a starting point for the development of useful drugs targeting CLC-K channels.

Mechanisms of block of muscle type CLC chloride channels (Review).

CLC proteins are a nine-member gene family of Cl- channels that have diverse roles in the plasma membrane and in intracellular organelles. The recent structure determination of bacterial CLC homologues by Dutzler et al. was a breakthrough for the structure-function analysis of CLC channels. This review describes the mechanisms of inhibition of muscle type CLC channels by two classes of small organic substances: 9-anthracene carboxylic acid (9AC) and p-chlorophenoxy propionic acid (CPP). Both substances block muscle type CLC channels (CLC-0 and CLC-1) from the intracellular side. For CPP, one could show that it inhibits the individual protopores of the double-barrelled channel. A major difference between the two types of blockers is the extremely slow binding- and unbinding-kinetics of 9AC (time scale of min), compared to that of CPP block (time scale of s), while the general mechanism of block seems to be quite similar. In the case of the chiral CPP only the S(-) enantiomer is effective. Both substances exhibit a strongly voltage-dependent block with strong inhibition at negative voltages and relief of block at depolarizing potentials at which the channels tend to open maximally. A quantitative kinetic model was developed for the CPP block of CLC-0 in which the closed state has a much larger affinity for CPP than the open state and opening of drug-bound channels is greatly slowed compared to drug-free channels. First experiments with mutated CLC-0 channels and with derivatives of CPP strongly support the pore localization of the CPP binding site. This work provides the basis for the use of these small organic substances as tools to investigate the pharmacological properties of mammalian CLC channels guided by the crystallographic structure of bacterial CLC homologues. They might also turn out to be useful to obtain information about the intricate coupling of gating and permeation that characterizes CLC channels.