Nb2O5 Microcolumns for Ethanol Sensing.

Pseudohexagonal Nb2O5 microcolumns spanning a size range of 50 to 610 nm were synthesized utilizing a cost-effective hydrothermal process (maintained at 180 °C for 30 min), followed by a subsequent calcination step at 500 °C for 3 h. Raman spectroscopy analysis unveiled three distinct reflection peaks at 220.04 cm-1, 602.01 cm-1, and 735.3 cm-1, indicative of the pseudohexagonal crystal lattice of Nb2O5. The HRTEM characterization confirmed the inter-lattice distance of 1.8 Å for the 110 plain and 3.17 Å for the 100 plain. The conductometry sensors were fabricated by drop-casting a dispersion of Nb2O5 microcolumns, in ethanol, on Pt electrodes. The fabricated sensors exhibited excellent selectivity in detecting C2H5OH (ΔG/G = 2.51 for 10 ppm C2H5OH) when compared to a variety of tested gases, including CO, CO2, NO2, H2, H2S, and C3H6O. The optimal operating temperature for this selective detection was determined to be 500 °C in a dry air environment. Moreover, the sensors demonstrated exceptional repeatability over the course of three testing cycles and displayed strong humidity resistance, even when exposed to 90% relative humidity. This excellent humidity resistance gas sensing property can be attributed to their nanoporous nature and elevated operating temperature.

Synthesis of TiO2-(B) Nanobelts for Acetone Sensing.

Titanium dioxide nanobelts were prepared via the alkali-hydrothermal method for application in chemical gas sensing. The formation process of TiO2-(B) nanobelts and their sensing properties were investigated in detail. FE-SEM was used to study the surface of the obtained structures. The TEM and XRD analyses show that the prepared TiO2 nanobelts are in the monoclinic phase. Furthermore, TEM shows the formation of porous-like morphology due to crystal defects in the TiO2-(B) nanobelts. The gas-sensing performance of the structure toward various concentrations of hydrogen, ethanol, acetone, nitrogen dioxide, and methane gases was studied at a temperature range between 100 and 500 °C. The fabricated sensor shows a high response toward acetone at a relatively low working temperature (150 °C), which is important for the development of low-power-consumption functional devices. Moreover, the obtained results indicate that monoclinic TiO2-B is a promising material for applications in chemo-resistive gas detectors.

Design and construction of a low cost air purifier for killing harmful airborne microorganisms using a combination of a strong multi-directional electric-field and an ultra violet light.

In this work we have designed and developed a low cost and simple instrument to purify air in an enclosure. The device sucks up the air in the enclosed area, kills the microorganisms and let clean air flow out. A combination of an ultra violet light and an electric field are used to kill the microorganisms in air. Three electric field chambers (radial, parallel, perpendicular) are used to clean air more effectively. Stainless steel meshes were used to increase the density of the electric fields. The outer covers were made with plastic and wood. The instrument was tested against an evaporated bacterial solution (Staphylococcus aureus) by letting it flow through the instrument and measuring the bacterial concentration of the output air. The results showed the instrument is extremely effective even when tested against high bacterial concentrations. The instrument is extremely useful to clean air in closed rooms such as in hospitals, schools, etc. and prevent the spread of airborne diseases.

Seed-Assisted Growth of TiO2 Nanowires by Thermal Oxidation for Chemical Gas Sensing.

Herein, we report the catalyst assisted growth of TiO2 one-dimensional (1D) nanowires (NWs) on alumina substrates by the thermal oxidation technique. RF magnetron sputtering was used to deposit a thin Ti metallic layer on the alumina substrate, followed by an Au catalytic layer on the Ti metallic one. Thermal oxidation was carried out in an oxygen deficient environment. The optimal thermal growth temperature was 700 °C, in a mixture environment composed by Ar and O2. As a comparison, Ti films were also oxidized without the presence of the Au catalyst. However, without the Au catalyst, no growth of nanowires was observed. Furthermore, the effect of the oxidation temperature and the film thickness were also investigated. SEM, TEM, and EDX studies demonstrated the presence of Au nanoparticles on top of the NWs, indicating that the Au catalyst drove the growth process. Raman spectroscopy revealed the Rutile crystalline phase of TiO2 NWs. Gas testing measurements were carried out in the presence of a relative humidity of 40%, showing a reversible response to ethanol and H2 at various concentrations. Thanks to the moderate temperature and the easiness of the process, the presented synthesis technique is suitable to grow TiO2 NWs for many different applications.

La2O3 hollow nanospheres for high performance lithium-ion rechargeable batteries.

An efficient and simple protocol for synthesis of novel La(2)O(3) hollow nanospheres of size about 30 ± 2 nm using polymeric micelles is reported. The La(2)O(3) hollow nanospheres exhibit high charge capacity and cycling performance in lithium-ion rechargeable batteries (LIBs), which was scrutinized for the first time among the rare-earth oxides.

Novel LaBO3 hollow nanospheres of size 34±2 nm templated by polymeric micelles.

Novel lanthanum borate (LaBO(3)) hollow nanospheres of size 34±2 nm have been reported for the first time by soft-template self-assembly process. Poly(styrene-b-acrylic acid-b-ethylene oxide) (PS-PAA-PEO) micelle with core-shell-corona architecture serves as an efficient soft template for fabrication of LaBO(3) hollow particles using sodium borohydride (NaBH(4)) and LaCl(3)⋅7H(2)O as the precursors. In this template, the PS block (core) acts as a template of the void space of hollow particle, the anionic PAA block (shell) serves as reaction field for metal ion interactions, and the PEO block (corona) stabilizes the polymer/lanthana composite particles. The PS-PAA-PEO micelles and the resulting LaBO(3) hollow nanospheres were thoroughly characterized by dynamic light scattering (DLS), transmission electron microscope (TEM), X-ray diffraction, magic angle spinning-nuclear magnetic resonance ((11)B MAS NMR), energy dispersive X-ray analysis, thermal analyses, Fourier transform infra red spectroscopy, and nitrogen adsorption/desorption analyses. The nitrogen adsorption/desorption analyses and TEM observation of the hollow particles confirmed the presence of disordered mesopores in the LaBO(3) shell domain. The solid state (11)B MAS NMR spectra of LaBO(3) hollow nanospheres revealed that the shell part contains both trigonal and tetrahedral boron species. The LaBO(3) hollow particles were applied to anode materials in lithium-ion rechargeable batteries (LIBs). The hollow particles exhibited high coulombic efficiency and charge-discharge cycling capacities of up to 100 cycles in the LIBs.

Periodic organosilica hollow nanospheres as anode materials for lithium ion rechargeable batteries.

Polymeric micelles with core-shell-corona architecture have been found to be the efficient colloidal templates for synthesis of periodic organosilica hollow nanospheres over a broad pH range from acidic to alkaline media. In alkaline medium, poly (styrene-b-[3-(methacryloylamino)propyl] trimethylammonium chloride-b-ethylene oxide) (PS-PMAPTAC-PEO) micelles yield benzene-silica hollow nanospheres with molecular scale periodicity of benzene groups in the shell domain of hollow particles. Whereas, an acidic medium (pH 4) produces diverse hollow particles with benzene, ethylene, and a mixture of ethylene and dipropyldisulfide bridging functionalities using poly(styrene-b-2-vinyl pyridine-b-ethylene oxide) (PS-PVP-PEO) micelles. These hollow particles were thoroughly characterized by powder X-ray diffraction (XRD), dynamic light scattering (DLS), thermogravimetric analysis (TG/DTA), Fourier transformation infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), magic angle spinning-nuclear magnetic resonance ((29)Si MAS NMR and (13)CP-MAS NMR), Raman spectroscopy, and nitrogen adsorption/desorption analyses. The benzene-silica hollow nanospheres with molecular scale periodicity in the shell domain exhibit higher cycling performance of up to 300 cycles in lithium ion rechargeable batteries compared with micron-sized dense benzene-silica particles.

Novel titania hollow nanospheres of size 28 ± 1 nm using soft-templates and their application for lithium-ion rechargeable batteries.

We report a novel protocol to prepare titania hollow nanospheres of size about 28 ± 1 nm with micelles of asymmetric triblock copolymers. The hollow particles exhibit unique electrochemical properties in lithium ion rechargeable batteries such as high capacity, very low irreversible capacity loss, and high cycling performance.